How to creating file with APD (tcode rsanwb) with Key and Test characterist

Hi everybody!
I'm creating an APD with RSANBW. Data Source is a query and Data Target a File. I want display Key and Test for everyone of query characteristics. I've revised properties of characteristics into the query rows and check "key and test", however the file only contains key values.
Some help will be very appreciated,
Regards,
Sebastian.

Hi Sebastian
the data the query pulls is from the cube/DSO, which stores only the key.
the query pulls the text from the master data tables for diplay purpose only. For APD purpose the query only supplies what is avaialable in the infoprovider.
To have key and text in the target file you neeed to use transformation type routine in the APD or create an infoprovider that stores both text and key as separate fields in it and use that for the APD, with or without a query.
Good luck,
vijay

Similar Messages

How to create file with APDU

Hello everybody,
It's my first time using Java Card ^_^,I want to create a file and fill the fill with binary data.but i don't know how to create file with APDU commands,so I need help here.
I think that there must be a Manual of the JavaCard's OS in this world,can someone tell me where to download it??
Thanks.
the fllowing is my card:
Samsung S1
Model:TiEx-32J
EEPROM size:32k
Platform Version:OP 2.0.1
Card Manager Status:OP_READY
KMC:40~4F/No derivation
Message was edited by:
AllenHuang

If you look around the forum for a bit, you will see that there is no notion of file systems on JavaCards (lexdabear posted this information less than two hours ago :-)). To store files, you will have to write an applet to hold byte arrays of the required size and handle receiving and sending of these.
As for documentation, you should have a look at the GP (General Platform) specification at http://www.globalplatform.org/, which defines communication between smart cards and other devices, as well as Sun's own JavaCard pages (http://java.sun.com/products/javacard/), which contain several useful resources on JavaCards.
Message was edited by:
Lillesand

Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4

Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav

How to create files with read/write privileges for everyone?

I have two iMacs 7,1 (one with Snow Leopard and the other with Mountain Lion) in a local area wireless network.
I have shared the "documents" folder in the Snow Leopard iMac in order to have files available to the other iMac. The folder has read/write privileges for everyone.
When I create a new file in the shared "Documents" folder (for example a new Open office document, or a Keynote presentation) this file is by default "read/write" for the Administrator but only "read" for all the other users, so when I try to open it from the other iMac, I am informed that the file is "read only".
I can obviously change the privileges of the file in the information window, but I have to do on a file per file basis and this takes too long.
Is it possible to change settings in order to create files which are always "read/write" for everyone?
And, secondly, since I have several existing files whose privileges I should manually change one by one, is it possible to make global changes of their privileges?
Thanks in advance
Best regards

couple of different changes - 1st, if you want to share folders, doing your whole documents folder is not the best way. Since both your computers can handle AidDrop, that's what I would recommend - http://osxdaily.com/2011/11/14/how-to-use-airdrop-in-mac-os-x/ - as it create an instant Ad-Hoc network between the two computers and then let's it done.
A second possibility that may not be what you're looking for, is to use google drive or some similay cloud sharing app to sync the documents back and forth. both of these solutions will transfer the files well, but the airdrop may be simplest

How to attach file with PR and PO?

Hi all
How to attach file (Drawings ,execl,etc..) with PR and PO
Please help on this
Thanks
Regards
Dhinesh

Hi
Thanks
But If i select system > service for object in change mode i am getting error "No
service availale" like that ,how to sort it out and attach the file
And more ever that icon (service for object) is not coming in change mode ,i selected
by menu path .How to make it display as icon in bar
Regards,
Dhina

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create table with rows and columns in HTMLB

Hello All,
Can any one tell me how to create table in HTMLB?
Regards,
Lisa.

Look at the sample BSP application SBSPEXT_HTMLB
also you can look at the below Blog..
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
<i>*Reward each useful answer</i>
Raja T

How to share files with iOS and android phone with my iPhone 6

I Just wanna know how to transfer files from iPhone to android phones and vise versa.

Best bet would be to use a third party cloud service such as DropBox or Box. Apps for them should be available for both platforms (they definitely are for iOS).

Need help to create file with name and current time stamp.

I need to create .xlsx file exporting data from sql database and file name would be 'FileName' and current yyyymmdd.
I'm trying to use following code but it's keep saying incorrect syntax near "+".
EXEC p_CreateExcel 'sql64', 'NewFile', '\\hrfile1\Shared\Buying Report\NewFile'
+ CAST(YEAR(CURRENT_TIMESTAMP) AS VARCHAR)
+ RIGHT('00'+CAST(MONTH(CURRENT_TIMESTAMP) AS VARCHAR),2)
+ RIGHT('00'+CAST(DAY(CURRENT_TIMESTAMP) AS VARCHAR),2)+'.xlsx'

This is what I have on EXEC p_CreateExcel
USE [XePro01]
GO
/****** Object: StoredProcedure [dbo].[p_CreateExcel] Script Date: 02/26/2015 11:27:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[p_CreateExcel]
@db_name varchar(100),
@table_name varchar(100),
@file_name varchar(100)
as
--Generate column names as a recordset
declare @columns varchar(8000), @sql varchar(8000), @data_file varchar(100)
select
@columns=coalesce(@columns+',','')+column_name+' as '+column_name
from
information_schema.columns
where
table_name=@table_name
select @columns=''''''+replace(replace(@columns,' as ',''''' as '),',',',''''')
--Create a dummy file to have actual data
select @data_file=substring(@file_name,1,len(@file_name)-charindex('\',reverse(@file_name)))+'\data_file.xls'
--Generate column names in the passed EXCEL file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from (select '+@columns+') as t" queryout "'+@file_name+'" -c -t, -T -S'''
exec(@sql)
--Generate data in the dummy file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from XeProgst01.dbo.'+@table_name+'" queryout "'+@data_file+'" -c -t, -T -S'''
exec(@sql)
--Copy dummy file to passed EXCEL file
set @sql= 'exec master..xp_cmdshell ''type '+@data_file+' >> '+@file_name+''''
exec(@sql)
--Delete dummy file
set @sql= 'exec master..xp_cmdshell ''del '+@data_file+''''
exec(@sql)
GO

How to create table with javascript and jquery in abap

Hello masters,
i want to create table using javascript and jquery.
i know how to use these languages but i dont how to implement them to abap.
regards.

Look at the sample BSP application SBSPEXT_HTMLB
also you can look at the below Blog..
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
<i>*Reward each useful answer</i>
Raja T

How to uoload file with Flex and Coldfusion?

Hi,
I try some application but they can not work well.
Please give me a hit for upload files.
Thanks
Mark

See these FB help topics:
Working with file upload and download
Example: Uploading and downloading files
Class FileReference

How to create DOM with node and its value

<Order>
<Manifest>
<Item>
<ID>101</ID>
<NAME>Name one</NAME>
<PRICE>$29.99</PRICE>
</Item>
</Manifest>
</Order>
i can write the code to create a DOM for this one.
but how can i write the code to get the DOM as shown below
<Order>
<Manifest>
<Item name="xxx">
<ID>101</ID>
<PRICE>$29.99</PRICE>
</Item>
</Manifest>
</Order>

Your question appears to be how to get an attribute applied to an element. Is that right?
If so, use the setAttribute() method of the Element interface.

Create View with Force and No Force

Can Anyone Tell me how to create view with force and no force i have very little idea about this

This is the syntax.
CREATE [OR REPLACE] FORCE VIEW view
[(alias[, alias]...)]
AS subquery
[WITH CHECK OPTION [CONSTRAINT constraint]]
[WITH READ ONLY [CONSTRAINT constraint]];You can see interesting threads about this topic here.
Re: Creating view forcibly
Creating View forcefully
Cheers
Sarma.

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I alocate th

I am trying to find out how to assign files with particular extensions to the appropriate software. At the moment when I create a file using Word it is apparently given the extension .docx but Word doesn't recognise its own files. How do I allocate the extension .docx to Word? There used to be a way of doing it, I think under "Preferences" but I can't seem to find it.

Still in the same location:
File > Get Info > Open with (select) > Change All (button)

How to create file on application server?

how to create file on application server?

Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
    FROM VBAP
    INTO TABLE ITAB
WHERE VBELN = P_VBELN
    PERFORM WRITE_DATA.
    PERFORM READ_DATA.
*&      Form WRITE_DATA
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM.                    " WRITE_DATA
*&      Form READ_DATA
      text
--> p1        text
<-- p2        text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
        ITAB-POSNR.
ENDLOOP.
ENDFORM.                    " READ_DATA
If it is helpful rewards points
Regards
Pratap.M

How to creating file with APD (tcode rsanwb) with Key and Test characterist

Similar Messages

Maybe you are looking for