How to crete transactional infocube

Hi guys,
Can any body tell me how to create transactional infocube.what is difference between transactional infocube and basic infocube and in what situation we will use transactional infocube.
full points will rewarded for good answer

Hi,
how to create transactional infocube?
Click on create infocube---then u will have options basic ,transactional .select option transactional .
what is difference between transactional infocube and basic infocube and in what situation we will use transactional infocube?
Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses which means data can be written to the infocube by several users at the same time . Basic InfoCubes are technically optimized for read accesses only.
Transactional infocubes are used for planning purposes.Basic cubes are not used for planning purposes.

Similar Messages

May i know how to create Transactional Infocube, Data from cube to cube

Hi All,
I need to create a Transactional Infocube. Can anyone help me how to create that. and how it differs from Basic cube while creating Transactional Infocube.
My other question is how to load data from one cube to another.( is it possible from basic to transactional )
It's urgent.
regards,
Ali

Hi Ali,
http://help.sap.com/saphelp_sem60ep1/helpdata/en/7b/a90e78d10311d4b3490050dadfb23f/frameset.htm
Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses .
Use
Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
please check these links,
http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
function module to read and write to a transactional infocube
read and write to transactional infocube
read and write to a transactional infocube
Regards,
Priyanka

How to create more $INFOCUBE

Hi,
I hava created some cubes, they are all in the $INFOCUBE.
how to create another $INFOCUBE.
Thanks,
Andy

Hi Andy,
we can create only one cube with same technical name in one BW system, may be you are talking about $INFOCUBE folder which contains infocubes, if my assumption is correct, if you want to create one more infocube under $INFOCUBE folder, you need to create infocube in BW system with RSA1 Transaction code, under infoarea (new or existing one) -> right click Create Infocube.
Best Regards,
Daya Sagar

Virtual Infoprovider with Transactional Infocube datasource??

Hi Gurus,
I need to use Virtual Infoprovider which is reading data from a Transactional infocube.
Virtual Infoprovider does not read yellow request in transactional cube. Is there a way to read this yellow request too? When I display transactional cube content I can see records which belong to yellow request. Virtual Infoprovider should see these records too I think.
We cannot change yellow state to green because business is continuously entering data to transactional cube.
Thanks in advance,
ergin

Hi,
refer this link for details about how to read yellow requests or change to green.
Re: FM to read yellow status requests from transactional InfoCube
thnks.

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How to find Transaction for a Known Table maintenance View

Hello Friends,
May I know how to find transaction for a known table maintenance View.
Thanks,
Best Regards,
Sudhanshu Garg

Goto SE16 Transaction and enter TSTCP Table
Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
enter table name in bold.
Thanks
Seshu

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

FM to read yellow status requests from transactional InfoCube

Hi,
I am using the FM RSDRI_INFOPROV_READ to read data from the transactional InfoCube. My problem is that my code using this FM should be able to read data requests that have the yellow status for the transactional InfoCube.
My code using this FM is able to read data from the green requests only but not the yellow requests. I was told in BPS, the yellow requests should turn green automatically after 50K of records have been queue up and ready to be turned green by itself.
Has anyone come across this and help me solve this issue of reading data using FM RSDRI_INFOPROV_READ to read yellow request data. Is there another FM to read both the green and yellow requests?
Please advise. Thanks
RT

Hi Rob,
The function module mentioned by you is correct and it will read the yellow requests please try this, by default the parameter i_rollup_only is set as true set it to false (blank) while calling the function module.
Please see the attached code
CALL FUNCTION 'RSDRI_INFOPROV_READ'
 EXPORTING
 i_infoprov = p_infocube
 i_th_sfc = t_sfc
 i_th_sfk = t_sfk
 i_t_range = lt_range
 I_PACKAGESIZE = p_pksize
 i_rollup_only = rs_c_false
 IMPORTING
 e_t_data = <fsl_data_read>
 e_end_of_data = w_end_of_data
 CHANGING
 c_first_call = l_first_call
 EXCEPTIONS
 illegal_input = 1
 illegal_input_sfc = 2
 illegal_input_sfk = 3
 illegal_input_range = 4
 illegal_input_tablesel = 5
 no_authorization = 6
 ncum_not_supported = 7
 illegal_download = 8
 illegal_tablename = 9
 trans_no_write_mode = 10
 inherited_error = 11
 x_message = 12
 OTHERS = 13.
Hope this was helpful.
thanks

How to update transaction data automatically into MySQL database using PI

Dear All,
With reference to subject matter I want a sincere advice regarding how to update transaction data automatically into MySQL database using PI. Is there any link available where I can get step-by-step process.
Ex: I have a MYSQL database in my organization. Whenever a delivery created in SAP some fields like DO Number, DO quantity, SO/STO number should get updated in MYSQL database automatically.
This scenario is related to updation of transactional data into MYSQL DB and I want your suggestions pertaining to same issue.
Thanks and Regards,
Chandra Sekhar

Hi .
Develop a sceanrio between SAP to Database system,When the data updates in SAP Tables read the data and update it in DATA Base using JDBC adapter,but there will be some delay in updating data in MySQL.
serach in sdn for IDOC-TOJDBC sceannario,many documents available for the same.
Regards,
Raja Sekhar

How to Include the Infocubes in a Multiprovider..!!

Hello Experts,
Question is related to multiproviders. I have some 20 to 30 of the infocubes in Dev System.
I have 2 multiproviders in the same system. I come to know..some of the infocubes missed out in multiproviders.
I tried to add those missed infocubes into multiprovider (MPRO --> Context Menu --> Change ) Change Structure.
But i found some of the infocubes are not available in the MPRO Structure Itself. For your info those all missed infocubes all are avaialable in the Dev system into some other info areas.
Now Question is how to include the infocubes of which of them are not available in MPRO Structure itself. I want to add the infocubes in the Multiprovider itself.
Please reply me the answer for the above scenario.
Thanks and Regards,
SN.

Hi Parvin,
Thanks for your reply. But i already tried as you mentioned.
Here my issue is..even for giving the tickmark also..the infocube needs to be opened in the MPRO structure.
My problem is Infocube itself is not opening in MPRO Structure.
How to include the infocube in the MPRO Structure itself.
Those cubes are avaialable in the Dev system where as those are not available in MPRO.
Thanks,
SN

How to get transacted session in direct mode with jmsra adapter

Hi,
I use MQ 4.4u1 release with GF in EMBEDDED mode. I configured several connection factories with NoTransaction/LocalTransaction/XATransaction support. In my app I get a connection factory from JNDI tree, create connection/session/producer and send several messages to queue. Everything works fine when I don't use transactions. But, when I want to send messages in one transaction, the connection always provided to me non-transacted session. The session created via
Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
request. I check the session transacted state and acknowledge mode right after i get it:
log.fine("Session: " + session + "; transacted: " + session.getTransacted() + "; ackMode: " + session.getAcknowledgeMode());
The log shows me that the session is not transacted and ackMode is 0 (DUPS_OK_ACKNOWLEDGE). If I try to commit the session after messages were sent I get the correct exception:
javax.jms.IllegalStateException: MQJMSRA_DS4001: commit():Illegal for a non-transacted Session:sessionId=3361979872663370240
Does anyone know how to get transactional session in direct mode?
Thanks, Denis.

I mentioned LOCAL because I misread your post and thought you were suggesting that LOCAL mode behaved differently.
If you want to send messages in a transaction from within a Servlet then I think you're expected to use a UserTransaction: Here's an example that worked for me:
 Connection connection = outboundConnectionFactory.createConnection();
 Session session = connection.createSession(true, Session.SESSION_TRANSACTED);
 userTransaction.begin();
 MessageProducer producer = session.createProducer(outboundQueue);
 int numberOfMessages = 10;
 for (int i = 0; i<numberOfMessages; i++) {
 Message message = session.createTextMessage("Hello world");
 producer.send(message);
 userTransaction.commit();
 connection.close();I obtained the UserTransaction with this resource declaration:
 @Resource(name = "java:comp/UserTransaction")
 private UserTransaction userTransaction;The EJB spec explicitly states that local transactions aren't supported in EJBs; I haven't found such an explicit statement for Servlets but suspect that JMSRA is taking the same approach.
As for imq.jmsra.direct.disableCM property - this appears to disable connection pooling and from your post changes other behaviour as well. How did you find out about it (other than by examining the code)? As far as I can see this is not a documented feature and is not necessarily tested or supported.

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

How to crete transactional infocube

Similar Messages

Maybe you are looking for