HOW TO CROP USELESS PARTS AFTER A ENLARGEMENT

First of all, excuse me for my enlish and thanks in advance to everyone. I have a special issue. I use Premiere Pro CS5.5.
For a lot of reasons (please don't ask me why or propose me other methods) I need to enlarge a clip so its dimensons are largest than frame. For example: I create a project and import a video;  a fter importing it I put it on timeline and I need to enlarge it. So, as you can see from the attached image, there are, obviously, parts over the frame. I need to cut off those parts so the clip can fit perfectly to the frame dimensions (I know, obviously, that in this case I loose those parts). How can I accomplish this without exporting in a file video and after reimport it? I think that I need a tool like the crop tool in Photoshop. The crop tool in Premiere Pro isn't good for me 'cos doesn't make what I'm lookin' for.
Bye
LS

Ann Bens wrote:
Export the clip to the sequence dimension.
This is a correct answer.  Even in Ps, you would have to save your cropped image to use it later.  This is the equivalent in Pr.
And if you want to use the "cropped" movie afterwards, import it into Pr.
BTW, asking that we please don't ask you "why" might not be in your best interest.  It often can help us help you if we understand the reasons you want to do something.  And disallowing "other methods" isn't likely going to help you get your mission accomplished.
Just yesterday, a woman asked me how to do something extremely complicated and expensive.  When I asked why she wanted to do it, it became obvious that a cheaper, faster, easier solution would work even better.
You'll learn more if you keep an open mind to workarounds.  That's what creative people resort to when the obvious method isn't available, or doesn't work as expected.

Similar Messages

  • On images that are long and narrow horizontally, iPhoto truncates them and automaticall crops off part of each end of the image.  How can I make it stop?

    On images that are long and narrow horizontally, iPhoto truncates them and automatically crops off part of each end of the image.  the thumbnail has a jagged, serrated edge at both ends.  How can I make it stop?

    Then I do not get your problem - you can import the photo - you can find the photo and you can edit and save the photo - what more do you want?
    By defination thumbnails are small images to help you find the large image - the large image is fine and you can find it fine - and you know it is only showing part of the image because of the "jagged ends"
    If you think think that iPhoto should display long thumbnails suggest to Apple - iPhoto menu ==> provide iPhoto Feedback
    as to your digital photoframe - contact them - in general gital photos frames display one and only one aspect ratio and any photo that is not in that aspect ratio will be modified to display - either cropped to the proper size for the frame or have 'White" space added to fill the frame - that function is totally controled by the Digital Photo frame and any otptions you have will be in the manual or on the support web site for the frame - to put it in old film terms - you can not put an 8x10 print in a 5x7 frame unless you cut the photo down (or a 8x15 photo in an 8x10 frame either)
    LN

  • How do you crop a part of a bitmap image in precise dimensions

    Hello
    I have created images of navigation bars and others using Fireworks CS6. However, I notice that selecting a navigation bar does not allow your to crop that image using Crop Selected Bitmap on the Edit menu. Please someone advise me how to crop an image in precise size from Fireworks so that I get a navigation bar in the ideal size I want.
    Thank you,
    Ead

    Not sure if my answer is what you are looking for but here goes.
    You can crop/delete any part of a bitmap by using the marque tool, I think the default shortcut key is the M key.
    Another tip -  using the marque tool you can select areas of your bitmap then go to Select (menu) then select inverse... now when you select the delete key it will delete everything outside of the selected marque.
    A little more advanced but extremely useful:
    The way I work in FW is a bit different. I alsmost never use bitmap graphics, rather I use vectors. Using these handy, quick custom commands that I created  http://fireworksinstructionalvideos.com/commands/selectPoints.zip, you can resize any object from any side with a simple shortcut key. 
    Once you have these four commands installed you can set up some really useful shortcut keys:
    Grab points:
    Left - shift + alt/option + L
    Right - shift + alt/option + R
    Top - shift + alt/option + T
    Bottom - shift + alt/option + B
    I hope this helps!

  • How do I put parts of multiple songs into one song?

    I'm trying to make a mix of songs for my friends party and I was wondering how I could put parts of multiple songs together into one soundfile? If iTunes can't do this are their any other softwares that could do this? Thanks, appreciate it.

    Prosper,
    That is beyond the ability of iTunes, and requires the use of an audio editor.
    A free one that many people like is Audacity.
    After you do the editing in Audacity, you can export an MP3 and add it in to your iTunes library.  The original files remain unchanged.

  • How can I copy part of a larger PDF file and create a smaller one?

    How can I copy part of a larger PDF file and create a smaller one?

    Hi,
    Copy the content of PDF file in Adobe Reader and paset it to MS Word then create PDF file from the Word file.
    This may not work for all PDF files as some PDF files are not created correctly or some content cannot be copied.
    Acrobat XI Pro has features to extract/delete/crop pages in PDF files and you can download it from www.adobe.com(Trial version- 30 days free). Or you can upgrade your subscription to Acrobat Plus and see more information at https://www.acrobat.com/acrobatplus/en/home.html
    Hisami

  • HT4061 How to restore my ipad after downloading itunes?

    How to restore my ipad after downloading itunes?

    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring:
    Verify that you are using the latest version of iTunes.
    Back up your device.
    Transfer and sync content to your computer.
    Restoring your iOS device
    Connect your device to your computer.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
    Click Restore.
    After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
    If needed, restore your device from a previous backup.
    If restoring does not finish successfully or if a restore error appears, see iOS: Resolving update and restore alert messages.
    Additional Information
    If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.
    Devices with cellular service should activate after a restore. If activation is not successfu, see the options below.
    Symptoms
    Your iPhone may display one of the following messages when you attempt to activate it:
    "Your iPhone could not be activated because the activation server is temporarily unavailable."
    "The iPhone is not recognized and cannot be activated for service."
    "iTunes was unable to verify your device."
    Resolution
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.

  • How to crop or cut a clip on the top or at one side?

    Hi,
    I would like to know how to crop a clip either on top or at one side?
    Thank you in advance
    Anja
    iMac 2,8 Ghz Mac OS X (10.5.5)

    I havent cropped that way before, but this should work. Double click the part of your clip you want to crop, in the viewer click the motion tap and select crop. You can adjust your parameters there, you should see your result in the canvas window. You will need to add markers if this effect ia for a portion of your clip.
    Check out the tutorials on apples website about adding motion.

  • How to play another tween after the first one is done playing?

    I create some tweens in as3, but I want another tween to start only after this one is done playing, how to write that part of code in as?
    Thank you.

    If you are using the built-in Tween class, assign an event listener to the first tween to listen for its TweenEvent.MOTION_FINISH event and use that to trigger the second tween.

  • How to Crop an .AVI media in PP CS4 if possible at all.

    Yes I'd like to know how to crop an AVI clip" I googled the question and got a lot of photoshop answers instead. What I wanted to do is, using an original clip get  2 short portions of it. that is of two different people jumping out of a plane and have them both spinning inversely 360 degree to the length of a song. I did it but was annoyed with the black edges on either side of the clips, especially interfering with the spinning of each clips (BTW I did export these two short clips after fitting them to the frame in a new sequence but the result is still the same, I hoped the new avi would not have the black edges, but it did not work!) I even would have preferred my two clips to be square for better visual balance but was unable to do this either. This may be a kind of picture in picture or in this case two pics in one. Thank you in advance for any tips

    In the Effects Panel (not the Effects Control Panel), there is a little query box. Just type "crop," and it would have popped up - just do not forget to clear that query box, of you will not see your other Effects.
    As for a Google search, I would have done advanced, with the string "Adobe Premiere Pro" and then the word "crop" and "effect" above.
    THIS is the second hit, with about the same, but for CS3, that I got. Cropping is more commonly used in still Image editing, such as with PS, so most hits on "crop" will probably throws 1000's of PS references. By putting in that string, where all words are kept together and in order, we eliminated nearly all of those.
    Good luck,
    Hunt

  • How to crop and delete a piece from a phot

    How to crop and remove some part of a photo

    You can use the crop tool for that, assuming you want to take a slice off it.
    (in my menu it is listed above the eyedropper tool, or you could just press C)
    You can then drag the box edges to fit the selection you want to keep.
    To be more precise, turn off snapping by unchecking snap at View > Snap
    If this does not do what you want, it would be handy if you added an image and description of what you want to change.

  • HT3386 How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

    How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

    Pages documents are organized in sections. When you click on the thumbnail for a page, the section containing that page is selected. The Delete command applies to the selection, so if you press delete at this point, the selected section is deleted.
    You can separate a section into two or more sections by inserting a section break at the end of the page before the page you want ot be the first in the new section, then inseritng a second section break where you want the second section to end. Click on the thumbnail for any page in the new section, thenpress delete and the new section will be deleted.
    If desired, you can then reconnect the two remaining sections into one by deleting the section break between them.
    An alternate is to select any floating objects on the pages you want to delete, then press delete. After that, select the text on the pages you want to delete, then press delete.
    If all objects on these pages (and al objects on pages following these pages) have been placed as Inline objects, this deletion may be done in a single step. Floating objects placed below the deleted material will maintain their position relative to the top left corner of the first page of the section,m and will not be in the same place within the text as they were before the deletion.
    "I even scan in jpegs of my documents and it incessantly adds blanks I can't remove."
    If your jpegs are inserted as inline objects, each will be treated as a single, large character in the text. You will see the same space left and right of the object as you would create by increasing the height of one character in the line of text to the same size as the height of the jpeg image.
    If they are inserted as floating objects, then depending on the Wrap settings, they may force text out of the space to the left, right, or both sdes of the object, as well as forcing a small gap above and below the object. If the scan includes excess white space around the graphic, this white space will be included as part of the object
    Regards,
    Barry.

  • HT4898 how do you syn mail after moving to icloud

    How do you syn mail after moving to iCloud?

    Yes, you can use iCloud mail with OS X 10.6.8. However you need to enter the account details manually using the Mail Server Information  

  • How do I upgrade iPhoto after upgrading to Mavericks

    how do I upgrade iPhoto after upgrading to Mavericks

    Go to the App site and check for latest which is 9.6 or open iPhoto and check for updates.

  • How can I use aperture after receiving the full adobe suite? It won't allow me to use it.

    How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in  aperture and the application is shut down.

    Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
    Mylenium

  • How do I eject iPhone after import to iPhoto?

    How do I eject iPhone after import to iPhoto?

    You don't need to eject the iPhone after importing, if it has vanished from iPhotos's source list in the sidebar. Then it has been dismounted.

Maybe you are looking for