How to cummulate sales orders for creating one planned order.

Hello friends,
My scenario is make to stock. I use sales orders for creating plan only. I want to cummulate all sales orders of one finish material and create one planned order for that material when i run mrp. How can i do this?
Thanks

Kiran,
What is the planning strategy you are using?
Does all the sales order requirment same? If it is same then it is possible. Please explain more in details. If not you need to look at using some perodic lotsize procedure to combine requirments. Like "Daily", Weekly" "Month" etc..
Regards,
Prasobh

Similar Messages

Make to Order- Avoid creating Firmed Planned Orders

Hi Gurus,
I am using strategy 50 for one of my materials and when i create sales order agains that material a firmed planned order is created automatically. As this is firmed planned order in case i stock in material for that sales order and fullfill its requirement and run MD50 MRP against sales order. The planned order still exists as it is firmed where as i need it to be deleted after running MD50, because required quantity has been fullfilled using transfer posting from another stock. Please suggest how can i achieve it. Is there any configuration available to create unfirmed planned orders instead of firmed planned orders against sales orders? as unfirmed planned orders get deleted after executing MD50 in such a scenario.
Best Regards,
Shah

Dear,
What is your MRP type for these material? Use PD and check
Check the planning time fence field for those materials. If the requirements are within the planning time fence, then it will create firmed planned orders.
Go to OPP1Master Data- > Check MRP Types--- here, on "Control parameters" tab you can find the desired field called "Firming type". Make it bank then system will not create the Firmed planned order.
Also refer this link,
Re: firmed planned orders
Regards,
R.Brahmankar

Planned Order for stock and planned order for customer requirement

Hello everybody
I want to make a different, in MD04, between the planned order for stock and the planned order created for a customer requirement
Thank for your help

Hi,
True planned order are generated for both the cases but the planned order generated for sales order will have sales order number in the below column and for stock will show independent requirement. Mainly no sales order reference will be there for make to stock scenario.
Hope it will help.
Regards,
Alok Tiwari

Multiple sales order in to one planned/production order

hello,
anybody pls help me. my scenario is make to order with configurable material. in this is it possible to create multiple sales order in to one planned order or production order. my client is asking this requirement. he wants to convert if the characteristics are all same sales order want to convert in to one planned or production order. pls suggest me how to do this.
thanks & regards
bhakta

Hi,
The feature for combining the Sales Orders based on the Charecteristics is available on in Industry Specific Solution - Mill Products (IS-Mill).
Otherwise, in standard SAP you can not do that..
"Material Variants" could be an alternative for this..
Regards,
Siva

Creating SNP planned order using ''BAPI_MOSRVAPS_SAVEMULTI3'

Hi Experts,
I am new to SAP-APO, kindly clarify my question. I am using 'BAPI_MOSRVAPS_SAVEMULTI3' with source of supply PDS for creating SNP planned order by passing 'EE' in the table parameters 'ORDER_HEAD-MASTER_ATPCAT'. It is creating a planned order which is PPDS planned order with number range starting from '1000...' rather than creating SNP planned order with number range starting from '8000..'. Please let me know what might be the reason for the BAPI misbehaving incorrectly. Also kindly let meknow what are specific parameters to pass to above bapi to create SNP planned order.

Hi,
The BAPI BAPI_MOSRVAPS_SAVEMULTI3 is used for creating PPDS inhouse orders.
You will have to use BAPI_MOSRVAPS_CREATESNPORDER for SNP inhouse orders creation from SNP PPMs( there is no explict mention of SNP PDS- you may please check).
Regards
Datta

How to exclude sales office for combination sales order type/division?

Hi experts,
I would appreciate if you could advise: How to exclude sales office for combination sales order type/division in ECC 6.0 ?

Hi
Standard SAP functionality would not be able to cater to this. Ideally create a Z table with sales order type and sales office combination. Put in entries for combinations that are allowed. In Sales order program MV45AFZZ use the exit USEREXIT_MOVE_FIELD_TO_VBAK. In this exit write down the logic passing the sales office determined and the order type and check if the entry is there or not. If the entry is there then it should go on to the next step. If it does not then pass an error message. You need to use the help of your ABAP er for this.
Thanks
Indranil

Planning - creating one Freight order each for one Freight unit

Hi,
We have a scenario where we want to create one freight order for each freight unit from automatic planning.
Please guide me if the above scenario can be executed.
Regards,
Renuka

3rd option which is kind of cool - if you set up an incompatability between this freight unit type and any other freight unit (including itself) then it will only be able to build one FU per Freight Order.
Note that I would expect this to be more processor intensive during optimisation than the capacity constraint option, but a more flexible overall.

4.6C method for creating a Maintenance Order

Hi,
We have a requirement to create and update maintenance orders on a 4.6C system. The scenario is that we need to programmatically mimic what users can do in IW31 and IW32. The BAPI_ALM_ORDER_MAINTAIN function module is not available on this system (SAP delivered that BAPI in a later version.) We've looked at IBIP but it does not offer structures for order data. Using "call transaction" and BDC data structures directly seems to be an option but difficult to implement and prone to error.
What other options exist for creating/updating maintenance orders on a 4.6C system? Thanks in advance for any information or examples you can provide.
-Jason

Ok. I've actually figured out how this works.
I'll post what I've found out in case it helps anyone else.
The parameters seem to be: ( with my example data in brackets)
I_AUFNR order number
I_VAPLZ work center ( MAINT.)
I_VAWRK plant ( 0001)
I_PLNTY Task list type = ( A )
I_PLNNR Task list group ( 55)
I_PLNAL Task list group counter ( 1)
The problem I have is that this bapi is not released, and it is not remote enabled.
Are there any released BAPIs that would do the same thing?
Or would I need to write my own remote-enabled BAPI that calls this one, and then try to call my BAPI ( using .NET Connector ) ?
Thanks,
Derek

Planned order is creating before planning bucket for a specific material.

Planned order is creating before planning bucket for a specific material.
Eg: Planning Bucket future: 12 months & Start date- 01/02/2012, but Planned order Availability/Requirement date is 12/23/2011.
What causes this, how to fix it? Please suggest u2026
Thanks
Ravi

Since your planning bucket start date is in the future, so this is normal that the system is trying to satisfy the demand in jan2012 bucket by creating a receipt on Dec23, 2011.
Reasons for RECEIPT to be generated earlier is
(1) There might be a FIRM HORIZON( SNP PROD HOR)
OR
(2) There might be a GR time and the system is considering that time
In Customizing for Advanced Planning and Optimization -> Supply Chain Planning -> Supply Network Planning (SNP) -> Basic Settings -> Maintain Global SNP Settings, in the SNP:GR for Plnd Ords field, you have selected Processing Time.
Blank out these times and see if it works, else do one of the following:
(1) Set Period Factor(LOT SIZE TAB of PRODUCT MASTER) to 1, so that the receipts get created at the end of the bucket.
OR
(2) Create your demand at the end of the planning bucket period
Thanks
Kumar

BAPI for Creating a PM order(iw34) with reference to a Notification

Hi All,
Could anyone help to find the BAPI for creating a PM order with reference to a notification Number.
I will explain my requirement :
I want to create a notification from an external Application where i got the BAPI BAPI_ALM_NOTIF_CREATE and keeping this created notification number as Referece or for this notification number i need a create a PM order.Usually this process in done transaction IW34 in R/3.
But with the BAPI BAPI_ALM_ORDER_MAINTAIN i can create a PM order but this BAPI doesn't have a input parameter "Notification number ".So i can't use this BAPI.
Could any suggest for a BAPI where i can create a PM order with reference to a Notification Number.
Regards,
Sid

Hi,
I have tried with the FM CO_IH_ORDER_GENER_2 but when i executes it gives a error message
"<i>Service/maintenance order type PM02 not completely maintained in plant
Message no. IW216
Diagnosis
For the selected order type and plant, no check control is maintained in Plant Maintenance/Service in 'Availability Check for Materials, PRTs and Capacities'.
Procedure
A check control must be maintained for this combination of order type and plant</i>"".
And even have a doubt what to enter in this input parameter "GEWRK_OBJTYP" .
Kindly help me to solve this issue.
Regards,
Sid

Can anyone give me user exit name for create/update purchase order partners

Hello guys
Can anyone gives me user exit name for create/update purchase order partners?
Requirement is to insert/update partner when SC flag is checked while creating/updating purchase order (ME22N / ME21N) by using user exit.

hi,
check these exits.
Transaction Code - ME21N                    Create Purchase Order
Enhancement/ Business Add-in            Description
Enhancement
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number

Create one plan element for multi org in OIC R12

Hi There,
Can I create one plan element and use this plan element for 2 orgs, like US and CANADA?
In EBS R115, I have to create more than 100 plan elements in each org.
I want to know in R12 if i still need to do this. If I can create one set plan elements for multi orgs, will save a lot of time. The only difference of org US and CANADA is currency.
Thanks a lot !

It is same in R12 also. You need to do the same as what you did in 11i. Not much changes on plan definition side.

Screen shots for creating Stock transport order

hi,
Can anyone send me the screen shots for creating Stock transport order between plants within company code?
Regards,
Swathi

hi
pls refer to HELP.SAP.COM INTHIS SELECT BEST PRACTISES and in that select building blocks it will ask country wise select india and give ur req type of industry .here u can see J05 AS materials management also other req i mean sto and all u can configure
regards
srinivas kona

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I think you are talking about grouping objects.
1. They must all be floating objects
2. Command click on each in turn
Menu > Arrange > Group
Peter

How to find Missing Parts for a particular Process Order?

Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.

Hi prince roy
you can use the T-code = <b>CO24 - Missing Parts Info System</b>
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri

How to cummulate sales orders for creating one planned order.

Similar Messages

Maybe you are looking for