HOW TO CUSTOMISE SEARCH USING WWSBR_SEARCH_PAGE?

As it is not possible to control the look and feel of the native search in Portal (10g), I am trying to use the recommended package, wwsbr_search_page to customise the search functionality. I have read about this package in http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsbr_search_page.html but there is no mention on how to deploy it. Could anyone give me some ideas how to use this package?

Perhaps this is what you want to do:
- http://download.oracle.com/docs/cd/B14099_19/portal.1014/b14135/pdg_cm_search.htm#sthref1305
Cheers,
Mick.

Similar Messages

How do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

how do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

Photo albums are not searched by Spotlight Search. Go to Settings > General > Spotlight Search to see and reorder the available search items.
For more details, see page 12 of the iPad iOS 5.1 User Guide

How to do search of business partner data, using a message from external sy

Hi CRM Gems,
please send the answer to the following question.
1.How to do search of business partner data, using a message from external system. What FMs, BAPI etc that can be used for this functionality?
your answer will be valuble to me.
Regards,
Krishna..

Hi krishna,
Look at BAPI BAPI_BUPA_SEARCH.
Regards.
Manuel

How do i search for a string in a txt file using java??

How do i search for a string in a txt file using java??
could you please help thanks
J

Regular expressinos work just fine, especially when
searching for patterns. But they seem to be impying
it's a specific group of characters they're looking
for, and indexOf() is much faster than a regex.If he's reading from a file, the I/O time will likely swamp any performance hit that regex introduces. I think contains() (or indexOf() if he's not on 5.0 yet) is preferable to regex just because it's simpler. (And in the case of contains(), the name makes for a very clear, direct mapping between your intent and the code that realizes it.)

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

How to create search function (af:query) using method in java

hi All..:)
i got problem with search custom (af:query), how to create search function/ af:query using method in java class?
anyone help me....
thx
agungdmt

Hi,
download the ADF Faces component demo sources from here: http://www.oracle.com/technetwork/testcontent/adf-faces-rc-demo-083799.html It also has an example for creating a custom af:query model
Frank

How to make and use customised DataSource

Hi Gurus. If we are not making cubes for Inventory etc for which DS is already available, how can we create data sources in order to load the desired data in BW.means if Database fields are entirely different
kind regards
rajesh

Hi,
Customised extractors are called Generic extracters.
Usage:
1. When the standard extractors are not supporting the extraction what you need. If SAP does not have a standard extractor for your need to get data from R3, you would have to go for generic extractor.
2. If you create a custom object say by combining certain base tables in R3 say custom tables ZTAB1 and ZTAB2. These two tables are not SAP provided tables and there will not be any standard extractors. So cases like this you will have to go for generic extractors.
3. FI-SL requires generic extractors.
How:
You have to use RSO2 transaction and you can also set delta based on, one of the three characteristics such as timestamp, calday or pointer (a sequence no).
once you create it and activate it. The extractor will be available in ROOSOURCE - (table in R3 where all the data sources are available).
Steps
Log on sap R/3.
Step 1. create a table or view for generic extraction in se11.
Step 2. Goto t-code RSO2
Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
Step 5. select create button,this will take u to another screen.
Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
Step 8. then U have to Table name or view name which u have created in se11.
Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
Step 10. in next screen u have to give some field which is primary key.
step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
step 12. then u have to specify whether new status for changed records or additive delta.
If u choose additive delta ,then u have to load data to infocube or ods object.
If u choose new status for changed records, then u to load data to ods object only.
Step 13. then save it.
Step 14. then logon to sap bw ,then replicate the data source then as usuall.
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Generic Extraction with Table, View, FM & Infoset
Creating a datasource for generic extraction
Generic Extraction
Customer and Generic extraction difference ?
generic extraction
Re: Generic extractors
generic extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b0
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.h
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Re: Generic Extractor - Delta
Thanks,
JituK

Who's Who: How to refine employee search using customer defined indicator?

Hello,
It is possible to refine employee search using status indicator STAT2 (Employees' Employment Status). I would like to refine employee search using e.g. Customer defined status indicator STAT1. I created an entry identical to STAT2 but with STAT1
in view V_T77S0 but it did not help at all.
How to refine employee search using customer defined indicator or any other info
from infotype 0000 or 0001?
Kind regards,
Pawel

Hi
This could be done using the infosets provided in who's who customization screen.
Pl go through following help.
If this helps, pl do reward.
Who's Who (ESS): Selection and Output
In this activity, you can change the fields for selecting and outputting data for the Who's Who service. The fields of the underlying InfoSet Query are available. Note, however, that text fields cannot be used for data selection (with the exception of the fields Organizational Unit, Position Name, and Job Name).
You have the following options:
You can specify the fields for selecting an employee.
You can specify the fields for the hitlist, that is, the list of all employees who meet the selection criteria.
You can specify the fields for the detail screen for a selected employee.
All selected fields are automatically transferred to the service in the sequence you chose and are then available for selection or output.
Standard settings
The standard system contains an InfoSet for the service. It contains default selection and output fields.
Activities
1. Check whether the default settings fulfill your requirements.
2. If you want to change the default values, proceed as follows:
a) Choose the relevant tab page and remove the indicator in the Use default settings for group box.
To change the selection fields, choose the Selection Fields tab page.
To change the fields of the hitlist, choose the Output Fields List tab page.
To change the fields of the detail screen, choose the Output Fields Detail tab page.
b) If you want to delete a default field, select the field in the relevant tab page and choose Delete Line from Display Table.
c) If you want to add an additional field from the InfoSet, select the field in the Fields in InfoSet group box and choose Copy Entry from InfoSet Table. You have two options:
You select an existing field in the tab page and choose Insert Entry in Display Table. The system copies the InfoSet field and inserts it above the selected entry.
You select the blank field at the end of the tab page and choose Insert Entry in Display Table. The system copies the InfoSet field and inserts it at the end of the tab page.
Note that the sequence of the fields in the tab page determines the sequence of the fields in the service.
The selection screen fields are laid out according to the following pattern (maximum of 4 rows and 20 fields):
1 I 2 I 3 I13 I17
4 I 5 I 6 I14 I18
7 I 8 I 9 I15 I19
10 I11 I12 I16 I20
The fields in the detail screen are laid out underneath each other for a maximum of 20 rows, while the fields in the hitlist are laid out from left to right for each row, for a maximum of 20 fields.
Note: You cannot select by the Employment Status field (P0000-STAT2).
d) If you want to add a new field that is not in the InfoSet, you have to create a new InfoSet. You then assign the required field to the new InfoSet. Then select the new InfoSet in the InfoSet field in the Parameters group box. Proceed as described above to add the field to the relevant tab page.
For information about creating InfoSets, see Specify InfoSets for Interactive Employee Selection in the IMG for the HR Information System.
Not the SAP naming convention for the standard InfoSet: /SAPQUERY/HR_XX_PA_ESS
The country code "XX" stands for "international." The InfoSet itself is in the global area (cross-client). You can create customer-specific InfoSets by copying an existing entry. Take account of your customer namespace and set the relevant country code.
Note: The Personnel Number field (P0000-PERNR) must not be added to the InfoSet. If you want to use the personnel number, use the P0001-PERNR field, for example.
e) In the Sort field of the Output Fields List tab page, you can specify the sort sequence in the hitlist.
Example: You have selected the Last Name and First Name fields for the hitlist. You want the hits to be sorted first of all by the employees' last name, then by the first name. You therefore enter 1 for the last name and 2 for the first name in the Sort field.
f) Once you have completed your modifications, choose Check Display Table. If the check was successful, choose Save to save your changes. If inconsistencies were found during the check, a message in the relevant line notifies you of them.
Further notes
In certain circumstances, runtime issues may occur, especially in data selection. If they do, set the Selection Fields indicator in the Use Default Settings for group box. This deactivates the use of the InfoSet Query; instead, the system uses the BAPI_EMPLOYEE_GETDATA method.
You can switch the hitlist and the detail screen to the BAPI_EMPLOYEE_GETDATA method by setting the Output Fields List and Output Fields Detail indicators.
Note that by setting an indicator, you restrict the field selection in the relevant tab page to the interface of the method.
If, in the initial screen, you enter a country for which values have not yet been defined, the system automatically creates an entry that sets all indicators in the Use default settings for group box. You can then edit the entry to suit your requirements.
You can specify whether you want employees' photos to be displayed in the service in the IMG for Employee Self-Service under Determine User Options.
If this helps, pl do reward.

How to Define and Use Formatted Search in Sap Business One 2007

Hi
Any Document on How to Define and Use
Formatted Search in Sap Business One 2007.
Thanks

Hi Manish,
It is Very simple Procedure of defining FMS(Formatted Search)
in SAP 2007B Same as SAP 2005B & SAP8.8 Version
Do this,
->> Open the require Document.
for ex. IF you add the UDF in Marketing Document(Sales/Purchase)
1. Goto the UDF (or) any Default(Original) Field and Click ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the require Auto refresh field
6. Check the Refresh Regularly (or) Display Saved Values.
Regards,
Madhan.

When I right click on a highlighted word I am prompted to search with AVG. I would prefer to search using an alternative search engine. How do I change this?

When I right click on a highlighted word I am prompted to search with AVG. I would prefer to search using an alternative search engine. How do I change this?

Reply: Cor-el > Excellent!! Thank You. In Tools, Add Ons, Extensions there was a Default Tab enntry which was the culprit. Am running W7 so the XP Tools, Options, Advanced , Use Hardware acceleration when available, wasn't of much help here, however I did fix a problem on another computer running XP with that same fix. Thank You very much! HD

How fast text search field in Oracle without using Intermedia?

How fast text search field in Oracle without using Intermedia? Thank you, Paul.

yes,it is overriden in VOImpl
public void executeQuery()
        setQuery((new StringBuilder()).append(selectStmt).append(" order by ").append(getOrderByClause()).toString());
        OAApplicationModuleImpl oaapplicationmoduleimpl = (OAApplicationModuleImpl)getApplicationModule();
        OAApplicationModuleImpl _tmp = oaapplicationmoduleimpl;
        if(oaapplicationmoduleimpl.isLoggingEnabled(1))
            OAApplicationModuleImpl _tmp1 = oaapplicationmoduleimpl;
            oaapplicationmoduleimpl.writeDiagnostics((new StringBuilder()).append(getClass().getName()).append(".executeQuery").toString(), (new StringBuilder()).append(" Query:").append(getQuery()).toString(), 1);
        super.executeQuery();
But I have extended VO and substituted the VO . In the substituted VOImpl, instead of executeQuery(),I have written
public void customExecuteQuery()
          setQuery((new StringBuilder()).append(selectStmt).append(" order by ").append(getOrderByClause()).toString());
          executeQuery();
Will this work,or do I need to do any changes?
Thanks,

How to control and use the search criteria values "%" ?

Hi,
When I searched some information in my employee name. I filled in search criteria values "%" and selected the "Go" button to see the result. But I got errors that the search criteria values should not begin with a "%" or "_" for at least one if the listed fields.
How to control and use the search criteria values "%" ?
Thanks,
sinolee

sinolee,
These kinds of details are mentioned in Dev guide. Always have a look into dev guide before posting.
--Shiv

How to do exact word search using Java API

Hi,
Can someone tell me how can I write a search query using Ultra Search Java API to return data containing a full word that is sent as a search
parameter. e.g. If I want to search for a word 'Dictionary' I need to get all the results conatining full word Dictionary for example if I
have following 4 records
1. Dictionary
2. English Dictionary
3. French Dictionary
4. AllDictionary
How can I write a query that returns me first 3 records only as they contain the word 'Dictionary' and not the fourth record as it's not a word.
Here is what I need to get back and ordered in that way as the 'Dictionary' needs to be first record because the search is on Dictionary.
1. Dictionary
2. English Dictionary
3. French Dictionary
Any help is appreciated.
Thanks

Looks like we can not do an exact word search using Java API.

How do you delete photo's and also how do you search in your phone for apps/anything using the latest software

how do you delete photo's and also how do you search your phonefor apps / anything ???
i am using the latest software update
many thanx to all in advance

Anywhere on a home page swipe down (not from the very top or you'll get the Notification Center) to launch Spotlight.

On iMac maverick using numbers how do I search for an address without scrolling through all. Chris

On iMac with maverick using numbers spreadsheet, how do I search for an address without scrolling through the lot.

Better to post your topic in the dedicated Numbers community > Numbers for Mac: iWork: Apple Support Communities

HOW TO CUSTOMISE SEARCH USING WWSBR_SEARCH_PAGE?

Similar Messages

Maybe you are looking for