How to customize DMS, linked to documentum, for EH&S using Kpro

Hi all,
I am working on configure a DMS in order to link EHS and a content server DOCUMENTUM using Kpro.
I have done some actions but it seems there is some specificities by using DMS for EH&S.
I have some problems for define data carrier:
- is the name of the data carrier must be the same as the name of the content server?
- what is the link between data carrier and content server?
So, i am looking for informations about data carrier...
/Ludo

Hi Ludovic,
You define data carriers if you want to save original records in a secure area using the SAP DMS (and not use the knowledge provider). The configuration is done at Data carriers under Document Management > General Data > Define Data Carrier
The below config scenario is similar to yours. Do browse:
http://www.scribd.com/doc/15557133/Sap-PLM-Ehs-Dms-Config
Content server and data carrier are two different concepts. The below threads will provide you information regarding content server and data carrier respectively
DMS Content server / Master guide
Re: Need help in setting up Data carrier
Regards,
Pradeepkumar Haragoldavar
Edited by: Pradeepkumar  Haragoldavar on Jun 10, 2010 11:38 AM

Similar Messages

  • How to customize DMS for EH&S using KPRO

    Hi all,
    I am triing to configure DMS for EH&S using KPRO. It seems there are some specificities link to EH&S for using DMS with Kpro.
    Id like to find documentations and / or help to know the different steps to achieve for configure DMS for EH&S using KPRO.
    Anybody can tell me the different steps to do and / or give me some documentations?
    Thanks
    /Ludo

    Hello Ludo,
    As Documentum is a separate document storage system, it requires a connector (Standard Interface) to connect to SAP-DMS.
    As I am not expert in this field so will not be able to help you but still I have some information like, Documentum will be used as the Main Application & all data & objects will be created or linked to SAP objects in the Background and the Content Services for SAP application integrates the Documentum content management system with the SAP R/3 system. It is an interface to the SAP R/3 system based on SAPu2019s standard DMS and ArchiveLink interfaces.
    I think your question is more relevant for DMS forum. May be you can post your theread there, so that you can get right answer or may be on this forum someone else can help you who has worked on this scenario.
    Regards,
    Niraj

  • How to add new tab after reason for rejection tab using tcode va01

    Hello,
    how to add new tab after reason for rejection tab using tcode va01.

    Hi,
    You can check this link...
    Hope it will be helpful to you.
    [https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
    [http://www.sapdevelopment.co.uk/enhance/fexits.htm]
    -Maharshi
    Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

  • How do I create an 'upload facility" for my website using Muse.

    How do I create an 'upload facility" for my website using Muse.  We are a print company and is how we receive most of our work.
    Iain

    Hey Iggy,
    These might help:
    Muse
    http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-what-is-business-catalyst
    http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-creating-and-publishing-sites
    -Dave

  • How to customize the link between archivelink and Alfresco

    hi,
    We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm].
    Each scanned invoice will be stored in Alfresco as a pdf file and we want to be able to display it from the sap 'display FI document' transaction (thru 'environment' menu / Additional assignments/object links).
    my question is how to make the bridge between sap archivelink and Alfresco for this display ?
    how to customize link between archivelink and Alfresco ? Is it possible with customizing only or is it necessary to buy third party software ?
    we are working in 4.7.

    Hi,
    Apparently you need an interface between SAP and Alfresco that implements SAP archivelink.
    Once that is in place you can configure a repository in OAC0.
    At the link below you find a link to a PDF
    http://forums.alfresco.com/en/viewtopic.php?f=14&t=13502
    Our company had an own content repository software. It used KGS SAPALINK to make the connection with SAP.
    Furthermore CTAC seems to have done development to connect SAP and Alfresco.
    Currently we are looking for a new repository system as well. A couple of weeks ago management decided that within some departments Alfresco will be the standard DMS. It would be great if we could use it as content server as well.
    Kind Regards
    Edmond

  • When I try to buy or update an app on my ipad, a window comes up asking me for a password using SOMEONE ELSE'S apple ID which prevents me from buying the app. How can I get my ipad toprompt for a password using my own apple ID, like it does w/ itunes

    When I try to buy or update apps, myipad asks me for a password using SOMEONE ELSE'S apple ID, which prevents me from buying/updating apps. But when I am buying songs on itunes, the ipad asks me for my password using MY OWN apple ID and everything works fine. HOW DO I GET MY IPAD TO REQUEST MY PASSWORD USING MY OWN apple ID WHEN I AM BUYING OR UPDATING APPS?

    The apps you are trying to update were purchased with (and therfore permanently linked to) someone elses Apple ID. If you do not know the password then you need to delete the app and redownload/purchase it with your Apple ID.

  • My wife and I share the same iTunes account.  How can I setup a separate account for her iPhone using my iMac?

    My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
    Thanks

    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • How do i able to get data for unit price using RSEG table?

    Dear All,
    How do i able to get data for unit price in RSEG table?

    Hi Thiru,
    Please check the logic in thread http://scn.sap.com/thread/1347964
    Hope this helps.
    Regards,
    Deepak Kori

  • How do i set up and ipad for my children using my Itunes account without synching my data from my Iphone? (contacts, calendar, etc

    I do not want or need my contacts and calendar on their ipad, but I would like to use my Itunes account...

    It's easy enough to do. You can share one Apple ID and have your own content on each iPad. You do not have to have the same apps, music, books and so on. Set up the iPad with your Apple ID for purchases. If you want the kids to have their own iCloud accounts so that they can FaceTime and Message you can do that as well. However you do not have to setup additional Apple ID's in order to do that, it just makes it a little easier,
    Anyway, after you set up their iPad - when you go so to sync your devices, you can set your sync preferences for each device any way that you like. Using apps as an example ... This is how you can select the unique content for you own device. You can do this in every tab in iTunes .... Apps, music, photos, movies, books, etc.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Apps Tab on the right.
    Click on all of the apps in the apps list that you want to sync to your iPad..
    Click on the Sync Apps Heading.
    Click on Apply in the lower right corner of iTunes
    In the Info tab of iTunes, just don't sync your contacts or calendar to the kids iPad.
    This will be helpful.
    iOS: Syncing with iTunes

  • How to customize page numbering on pages for ipad

    I want to number my pages but not number the first page, which is the cover sheet.  How can I do that?  This is on Pages for Ipad.

    I have the same problem / need.
    Does anybody know if there is any sort of integration of iOS pages with Contacts in iPad / iPhone?

  • How to customize a JTextField as CellEditor for a JTable?

    Hi, I want select all the text (for overwriting) which is already in the table cell.
    I had tried to extend AbstractCellEditor (or DefaultTableCellRenderer) and implemented TableCellEditor .
    In the method:
    public Component getTableCellEditorComponent(JTable table,
    Object value,
    boolean isSelected,
    int row,
    int column)
    I tried to call selectAll() on my JTextField but nothing had happen.
    I also tried to set the value before (instanceof Stirng).
    Any help appreciated.
    Greetings Michael

    This posting shows one possible solution:
    http://forum.java.sun.com/thread.jspa?forumID=57&threadID=580410

  • How do I enable my Apple ID for iCloud to use with a PC?

    I installed the iCloud app for PC. I have an Apple ID, but when I try to access the iCloud thu the app, it says that I have a valid Apple ID but it's not valid for iCloud. I need to sign up for iCloud.
    How do I do that?

    Herbalwise wrote:
    ... I need to sign up for iCloud.
    How do I do that?
    To enable iCloud on your Windows PC,
    first set up iCloud on your other devices,
    then install the iCloud Control Panel for Windows...
    From Here...
    http://www.apple.com/icloud/setup/pc.html

  • How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

    Hi There, I have just bought a new 2013 iMac.
    Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
    How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp?  I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
    Thank you. Joe

    Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
    Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
    After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
    The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • How can I download iTunes 9.1 for my Mac using a PC?

    When ever I go to the download link it automatically detects that I am using a PC (in fact it's Ubuntu linux, yet it only offers me the Windows version of iTunes), is there a direct download link to the Mac OS X 10.6 iTunes 9.1 dmg (for installing on an i5 iMac)?
    I also want to download iTunes for 10.4.11 on a CoreDuo iMac, is the same installer good for both versions of Mac OS X?

    Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
    Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
    Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should.

  • How to copy uploaded blob to asset for AMS processing using PHP SDK

    I'm using Azure PHP SDK for Azure Media services and having problem with uploading large files (< 64 mb). So i tried using Blob service to upload as a chunk and commit it as a single file. It also works fine, and now media services won't directly take blob
    as a input. So i need to convert it into an Asset.
    I'm following the link https://msdn.microsoft.com/en-us/library/azure/jj933290.aspx which
    has example using .NET, is there a PHP sdk library support available for copying blob to asset. If yes please let me know the class and its methods or link.
    Please advice
    Mohanraj

    Hi Mohanraj,
    We recently had a fix for the problem you mentioned above:
    https://github.com/Azure/azure-sdk-for-php/commit/972e09c74308411602027280ededb3048b1e2fc4. We will try to release it asap but you can now try to upload by using this code pulled from dev branch.

Maybe you are looking for