How to customize email notifications sent by Cisco Prime.

Hi,
We have been receiving email alerts for any unresponsive devices in Cisco Prime. I was able to find the option to customize the subject for such email alert under Admin-Network-Notification and Action settings, however I am not able to locate the option to change the email body.
The email body for such alerts has lot of unrequired information which I would like to remove.
Can someone provide me the options on how to get rid of such information in the email body.
Regards

Hi ,
To customize the e-mail subject:
Step 1 Select Admin > Network > Notification and Action Settings > Fault - Email subject customization.
The available and selected lists of the subject attributes for e-mail are displayed.
To customize the e-mail subject, you can add and remove subjects from the current e-mail subjects list. By default, following list of e-mail subject attributes are displayed in the Selected Subjects for E-Mail box.
•Event ID
•Device Name
•Time
•Severity
•Event Name
•Status
To add a subject:
a. Select the subject attribute from Available Subjects for E-Mail.
b. Click Add.
The selected subject attribute is added to the Selected Subjects for E-Mail list.
You can add a subject attribute only from the Available Subjects list to the Selected Subjects list. You cannot add a subject attribute from the Selected subject list to the Available Subject list.
To remove a subject attribute:
a. Select the subject attribute from Selected Subjects for E-Mail.
b. Click Remove.
The selected subject attribute is removed from the Selected list and added to the Available subjects for E-Mail list.
You can remove a subject attribute only from the Selected Subjects list and not from the Available Subjects list.
Step 2 Click Up or Down to rearrange the order of the selected e-mail subject attributes.
Step 3 Click Apply to save the customized e-mail subject attributes.
Note: Other than this you will not be able to customize any thing, User-defined fied option will not work.
I hope this will help
Thanks
Afroz

Similar Messages

Customize email Notifications sent from UWL

Hello,
Can the eMail notifications sent from UWL be customized in Portal 7.3 ?
Regards,
Jay.

Hi Jay
I hope you are well and many thanks for using the SAP Discussion Forums.
In relation to your query you mentioned the following:
Can the eMail notifications sent from UWL be customized in Portal 7.3 ?
In UWL lingo, notifications that you would see under the notification tab are specific to: Knowledge Management Collaboration Recent Notifications. Notifications through the Universal Worklist deal with Knowledge Management and Collaboration. If you are looking to integrate SAP Office within the Universal Worklist please refer to note 945484 How to receive office notifications in the universal
worklist.
Now in terms of actually customizing the emails themselves. From my research and understanding if
you are using the default mail notification this is not customizable. You can however put a notification task in the flow(just before the human task), if you want to customize the notification content. This would be done through the task ID for the workitems (you can find this through the enalbement of the support information).
Kindly update me as per your findings.
Kind Regards & All The Best
Troy Cronin
Enterprise Portal Support Engineer
AGS

How to customize email notifications in COREid

Hi
Customer trying to customize email notifications in workflow COREid.
Documentation is not very clear on how to do this.
Any help is appreciated
Toly

Hi ,
To customize the e-mail subject:
Step 1 Select Admin > Network > Notification and Action Settings > Fault - Email subject customization.
The available and selected lists of the subject attributes for e-mail are displayed.
To customize the e-mail subject, you can add and remove subjects from the current e-mail subjects list. By default, following list of e-mail subject attributes are displayed in the Selected Subjects for E-Mail box.
•Event ID
•Device Name
•Time
•Severity
•Event Name
•Status
To add a subject:
a. Select the subject attribute from Available Subjects for E-Mail.
b. Click Add.
The selected subject attribute is added to the Selected Subjects for E-Mail list.
You can add a subject attribute only from the Available Subjects list to the Selected Subjects list. You cannot add a subject attribute from the Selected subject list to the Available Subject list.
To remove a subject attribute:
a. Select the subject attribute from Selected Subjects for E-Mail.
b. Click Remove.
The selected subject attribute is removed from the Selected list and added to the Available subjects for E-Mail list.
You can remove a subject attribute only from the Selected Subjects list and not from the Available Subjects list.
Step 2 Click Up or Down to rearrange the order of the selected e-mail subject attributes.
Step 3 Click Apply to save the customized e-mail subject attributes.
Note: Other than this you will not be able to customize any thing, User-defined fied option will not work.
I hope this will help
Thanks
Afroz

How to configure email notification for Attestation?

Hi to everyone
I have configure an attestation process and its working now, but i would like to know how to configure an email notification sent to invited reviewer or particular user based on certain actions when reviewer submit as certify, reject or delegated.
Thanks in advance.

There are certain built-in templates for notifications when assigned, delegated, declined, invalid list of reviewers..etc (http://download.oracle.com/docs/cd/B32479_01/doc.903/b32450/attestation.htm#sthref283).
But I am not aware of notifications based on reviewer's response CERTIFY/REJECT. Not sure if this is an out-of-the-box feature, but you could have a custom task based on the AttestationOperationsIntf class to get this implemented.
Rgds, Ajay

How to send email notification in different languages in Workflow ?? Urgent Help Needed

Gurus,
How to send email notification in different languages in Workflow? Can anyone send me some useful guidelines or link where it is mentioned.

There is no profile option available to specify whether send or not send email notification.
But after login, in preferences youcan set the notification preference value by which you can configure whether to send or not
to send email notifications.
If you select ''Do not send me mail' or 'Disabled' it will not send.
For other values it sends the notfication in different formats like text, html, attachments etc...
Edited by: sarojak on Jun 27, 2011 7:18 AM

How to close email notifications to senders from HP eprintCenter?

Hi,
How to close email notifications to senders from HP eprintCenter?
Thank you.

Hi Jack7363,
Welcome to the HP Support Forums. I gather that you would like to know how to turn off notifications from HP’s ePrintCenter.
To better assist you, would you please supply some additional information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
Do you have an HP Connected account or HP ePrintCenter account?
Are the emails coming [email protected]?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to stop email notification from apple support site.

how to stop email notification from apple support site. please inform me

If you know the thread or community that is sending you the emails you can go directly to those and skip the rest of this however if you don't remember or are still getting email after going to the community read on.
Stopping email from ths site can be difficult, it is a multi step procedure. See the link Stopping emails from ASC which Neil posted for all the details.
regards

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to set email notification,

How to set email notification , if my apple ID is used from find my iphone or in any other case?

What are you rmail settings? Sounds like manual pull versus push, is this correct? If your email provider does not offer "push" mail like gmail or iCloud then change from manual pull to hourly or the interval you prefer; more frequent can degrade battery performance.
Also, go to Settings > Notifications and select "Mail" and move "view in lock screen" to on to see message previews in the lock screen.

How to activate email notification for SC approval

Hi Gurus;
We are using SRM7.
How to activate email notification for SC approval i.e. the system should send email to the approver's external email (e.g.Outlook) informing that there is SC to be approved.?
Thanks

Hi,
You can schedule the /SAPSRM/OFFLINEAPPROVALSEND program.
http://help.sap.com/saphelp_srm701/helpdata/en/31/47c6cb8e9249f2bc29444212e4704a/frameset.htm
Regards,
Masa

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to setup email notification

How to setup email notification?

Refer the doc below
http://www.oracle.com/technology/products/oem/pdf/BestPractices-Notifications.pdf

Email notification in human task: How to customize email subject.

Dear all community members,
I am using email notification service in human task to receive email notification if task is assigned to me. I have configured email notification in human task & I do receive the email in my inbox as assignee.
The default email subject is like [Action Required: TASK_TITLE], I want to remove this [Action Required:] from email subject.
I tried setting <%null%> in Notification Header in .task file but the email subject is still has Action Required.
Is there any way to customize email subject so that I can get rid of [Action Required:] [FYI] in email subject.
Thanks & Regards.

I believe this will help - http://docs.oracle.com/cd/E23943_01/user.1111/e15175/bpmug_cust_res_bndl.htm

How can I have an email notification sent to me (it's already sent to the submitter of the form)?

I've created a form and have allowed the "email submission receipt" so an email is sent out to the submitter confirming that the person filled out the form. Is there any way to have that same email sent to me?
I tried the option of using "Email Notifications", but it says my email address isn't verified. I am a collaborator instead of the author and can't change the author's email address to mine.
Help!
Thanks.
Karen

I want to add to my last reply as this is a bit confusing.
You say you are NOT the author of the form. What are your rights to the form? Are you a co-author, contributor or reader? Author and Co-authors can turn the feature on and off. Contributors and Readers don't have the rights to do so.
You say : "I am a collaborator instead of the author and can't change the author's email address to mine". What do you mean? Is it disabled (greyed out)? If the feature is turned on (check box "Send email notifications when submissions are received" is checked) then you should be able to add yourself to the "To" field.
Note that to receive notifications to a specific email address that email address needs to be a FormsCentral account (it can be a free account). If it isn't then make sure you create an account for that email address, accept the TOU and then confirm the email address after receiving the email from FormsCentral. Only after those steps are done will you be able to receive email notifications. We can only send notification to FormsCentral accounts so that the user can opt-in/otp-out of the notifications emails.
Gen

How to customize email notifications sent by Cisco Prime.

Similar Messages

Maybe you are looking for