How to customize the data selection on a standard 2LIS_08TRTLP

Hi All,
on the datasource '2LIS_08TRTLP Shipment delivery per stage', I would need to filter on '0DEL_TYPE delivery type' but it is not part of the standard 'data selection' for this datasource.
I have some initial loading issue if I cannot filter directly at the datasource on a specific delivery_type.
How can I 'enhance' the data selection for this standard datasource with the addition of this new filtering condition on 'DEL_TYPE'
thanks in advance for your great support
DHNG

Go to change mode of datasource using transaction code RSA6. uncheck the hide sel and customer field column.
Check the check box - del type and save it.
it will be available for selection and check it in rsa3
hope it helps you
mahantesh

Similar Messages

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

How to customize the selection screen of Get Objec

hi all,
I'm developing a program for sap hr.
I use the 'Get objec' to creat the selection screen.
and I wanna limit the date selection.
The defaut display is the 'Period' of radio-button group.
and I want only the single field 'Date' for input insead of a period with starting and ending dates (manuelly we need click on a button to switch to 'Date' input).
How can I switch automatically to the 'date' when I initilize my program?
Thanks a lot for your help
Yimin

Hi,
This is possible through program attributes.
goto attributes, click on 'HR Report category'
now make sure that, 'Master Data (Infotype)' is changed accordingly your requirement.
I think it is helpfull to you.
Regards
Sai

How To Add InfoObject in the Data Selection Tab of InfoPackages in 2004s

Hi Y'all!
I would like to ask how to add an infoobject in the Data Selection Tab of the InfoPackage in 2004s. It says its optional, this definintion of selection criteria for the infopackage.
My apologies, I don't understand how this is done. Surely, I would like, however, to understand how to add an infoobject in this data selection Tab of the InfoPackage in 2004s.
Can any kind soul out there (gurus) please lend me your thoughts?
Regards,
Philips

Hello Rajani!
Thank you very mcuh for that! I super appreciate it! Can you prescribe how I can do this step by step please? Where exactly in the DS can I locate this "field for selection" option in the DataSource?
Regards!
Philips

How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

How to pass the data from a input table to RFC data service?

Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.

Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks.

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
 MFL1(9) TYPE C,
 MFL2(5) TYPE C,
 MFL3(9) TYPE C,
 MFL4(2) TYPE C,
 MFL5(8) TYPE C ,
 end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
 setid(8) type c,
 end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
 mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
 mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
 mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
 mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
 mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
 mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = MFILENAME
 FILETYPE = 'ASC'
 TABLES
 data_tab = matab1
 EXCEPTIONS
 file_write_error = 1
 invalid_type = 2
 no_authority = 3
 unknown_error = 4
 OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
 MFL5 = '0'.
 CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
 MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
 "evaluate
*& Form GET_SOURCE
 text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
Do 1st point in BACKGROUND
1. Read the data file from application server into an internal table using OPEN DATASET
Do 2nd point in Foreground
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

R12 - How to customize the seeded Purchase Order PDF report

Hi,
We need to customize the layout AND the data of the seeded Purchase Order pdf report that is generated in PO Summary form when user picks drop-down menu Inquire->View Document. I know how to set up the Document Type with a customized layout but I do not know how to update the XML data that feeds the layout.
Thanks, Mike

Mike,
Please review the following documents.
Note: 374165.1 - How To Customize The PDF Output For Printed Purchase Order Report (Portrait) ?
Note: 406094.1 - How To Diagnose Issues Within Oracle Purchasing PDF File Creation for Printing
Regards,
Hussein

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

How to check the data in a temporary table

Hi,
A procedure inserting data into a temporary table , data exists in the table now. so, how to see the data from the temporary table. Is it possible to see from the sqlplus by selecting, right now i'm not getting any data. .thanks Bcj.

If you are referring to Global Temporary Tables, then the only way to see the contents of the table are to select from the table while connected to the same session that inserted the data into the GTT.
Please note however that there is not a 1 to 1 correspondence between sessions and users (shcemas). A user may be connected to 1 or more sessions, but it is only the session that inserted the records that will be able to view the records.

How to filter the data in different sections (e.g. Report Footers)?

Hi,
I am using Crystal Reports 11 to generate cross-tables.
I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
How to filter the data in different sections (e.g. Report Footers)?
Thank you in advance.

Hi,
Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
Do the same for all the subreports.
-Abhilash

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7th day of each month using IW:
select sysdate current_date,
 trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
 select add_months(date '2013-1-1',level-1) dt
 from dual
 connect by level <= 12
select dt first_of_the_month,
 trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
( "STABBRE" VARCHAR2(20 BYTE),
 "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
 "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

How to move the data of a table from sqlplus to XML file

Hi,
Could you pls guide me how to move the data of a table from sqlplus to XML file.
i want to do it from sqlplus rather than toad.pls help
Thanks

Oh..I'm in 9i.
Try this out..and let me know.
DECLARE
CTX DBMS_XMLGEN.CTXHANDLE ;
XML CLOB ;
F UTL_FILE.FILE_TYPE;
XMLC VARCHAR2(32767);
BEGIN
CTX := DBMS_XMLGEN.NEWCONTEXT('SELECT * FROM department1 ') ;
XML := DBMS_XMLGEN.GETXML(CTX) ;
XMLC:=TO_CHAR(XML);
SHOW_ENVELOPE(XMLC);
F := UTL_FILE.FOPEN('ATTACH_FILES','DEPT.XML', 'W');
UTL_FILE.PUT_LINE(F,XML);
UTL_FILE.FCLOSE(F);
END ;
Good luck!!!
Bhagat
null

How to customize the data selection on a standard 2LIS_08TRTLP

Similar Messages

Maybe you are looking for