How to customize the reports
Post Author: [email protected]
CA Forum: Desktop Intelligence Reporting
Hi all,
scenerio1: all users should have same look & feel of report. - please tell me the steps how set the preferences for this scenerio.
scenerio2: every should have different look and feel (example user1 should have different view with user2). - please tell me the steps how set the preferences.
NOte: when a User executes a report a default header and footer should be appear with company logo etc.
Thanks,
Hi,
This can be achieved in Desktop Intelligence by creating templates (.ret) and then using those templates as default templates in the report.
You can create different templates according to the user's requirements.
Similar Messages
-
How to customize the reports tab
hi,
Is there any way i can customize the reports tab? i'd like to publish my reports on the lists in order people can access them directly without having to go to custom shared analisis. Is it possible?
thanksTry something like this:
https://secure-ausomxxxx.crmondemand.com/OnDemand/user/analytics/saw.dll?Dashboard&PortalPath=/shared/Company_****-*****SharedFolder/_portal/$$$$$$$$$$$
where xxx denotes your instance pod,
*** denotes the name of your shared folder where reports are stored to be shown on the dashboard(to get this open any of your reports and filter it by selecting one of the reports from shared folder. the string of characters that you will see in the path is to be used)
$$$ denotes the name of your dashboard. -
Customize the report margin while rendering
I want to customize the report margin while rendering. I am using ReportExecution2005.ReportExecutionService webservice to render report. how to customize the report margin?
I try to use deviceinfo for this and set the below device info, it is not work out. It always render the report with design time margin. Is it right approach? Are there any issue on below deviceinfo?. Thanks in advance.
<DeviceInfo><PageWidth>11in</PageWidth><PageHeight>8.5in</PageHeight><MarginTop>.25</MarginTop><MarginBottom>.25</MarginBottom><MarginLeft>.25</MarginLeft><MarginRight>.25</MarginRight></DeviceInfo>
Best Regards
Senthil
DeveloperI found the solution. Device info have has the value without metric. The below device info is correct one. Thanks to all ;)
<DeviceInfo><PageWidth>11in</PageWidth><PageHeight>8.5in</PageHeight><MarginTop>.25in</MarginTop><MarginBottom>.25in</MarginBottom><MarginLeft>.25in</MarginLeft><MarginRight>.25in</MarginRight></DeviceInfo>
Developer -
How to Customize the Message "No Row Returned" from a Report
Hi,
I've been trying to customize the Message "No Row Returned" from a Report.
First i followed the instructions in Note:183131.1 -
How to Customize the Message "No Row Returned" from a Report
But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
So i followed the "fix" in the document above and now my output is,..
"Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
So i search in Metalink for the above and come up with,...
Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.
-
R12 - How to customize the seeded Purchase Order PDF report
Hi,
We need to customize the layout AND the data of the seeded Purchase Order pdf report that is generated in PO Summary form when user picks drop-down menu Inquire->View Document. I know how to set up the Document Type with a customized layout but I do not know how to update the XML data that feeds the layout.
Thanks, MikeMike,
Please review the following documents.
Note: 374165.1 - How To Customize The PDF Output For Printed Purchase Order Report (Portrait) ?
Note: 406094.1 - How To Diagnose Issues Within Oracle Purchasing PDF File Creation for Printing
Regards,
Hussein -
How to customize the error messages in web analysis reports
Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri -
How to grow the report of customer's openitem with sales order
How to grow the report of customer's open item with sales order?
Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order . I want to know if other company have use this idea. Or have other solution for my problem.Hi Yuzhou Yang ,
Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
As you are aware that while creating a sales order , no FI entry is generated.
In my opinion you can get the required report through customization.
Thanks
D.K.Lakshmi narayana -
How to download the report data in xml format
Hi All,
how to download the report data (sql/interactive) in xml format...
Thanks,
VinothYou will want to do something like this:
http://spendolini.blogspot.com/2006/04/custom-export-to-csv.html
except customize it for xml.
hth,
John -
How to customize the infoview and dashboards.
Post Author: [email protected]
CA Forum: WebIntelligence Reporting
Hi all,
how to customize the infoview and dashboards.
scenerio1: all users should have same look & feel of infoview. - please tell me the steps how set the preferences for this scenerio.
scenerio2: every should have different look and feel (example user1 should have different view with user2). - please tell me the steps how set the preferences.
Thanks,
Madhu.Post Author: Use_BO
CA Forum: WebIntelligence Reporting
Hi Madhu,
For Scenario 1 : Go to CMC.
Go to : Home > BusinessObjects Enterprise Applcations > InfoView
You can customise Inforview properties and Rights here, like setting up ur logo,style sheets etc.
For Scenario 2: Each User will have to customize their own Infoview.
Go to Infoview. On the top right corner will be 3 icons. Click on the 'Preferences' icon.
In the General tab of preferences you can customise the infoview settings.
Hope this helps.
Thanks!! -
How to find the report for the SAP query (Query exists in table AQLQCAT)
Hello Experts,
I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing AQusergroupquery name* in transaction SE38.
But unfortunately the program does not exists for the given paramenter.
Could you please let me know how to get the report name for the SAP Query.
Secondly please suggest any other way of checking the tables used in the SAP Query.
Also the table name from where i can download the SAP Queries.
Thanks in advance.
Regards,
Rahul SinhaI suggest you a simple method.
Execute the query. When the selection screen is showed, go to menu and click to SYSTEM->STATUS.
Check the program name and double click it to access the program code.
Search for tables or functions into the source code in order to understand where data are taken.
If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
Best regards. -
How to format the report with the aggregated value
Hi,
I have 2 characteristics and 3 KFs in the infocube.
First field is Cost Center
Second field is creation Date
3rd field is KF1
4th field is KF2
5th field is KF3
I have put the date field( in the row) as this is required for calculating formula for KFs. But I have set that as No display.
The date in the info cube is as follows.
Cost Ceneter Date( no Display) KF1 KF2 KF3
CC1 01/01/2006 100 150 200
CC1 02/02/2006 75 100 95
CC1 05/02/2006 125 95 125
CC2 01/02/2006 75 25 85
CC2 02/02/2006 85 65 10
As the Date field is in query set to No display so the date appearing in the report is as follows
CC1 100 150 200
75 100 95
125 95 125
CC2 75 25 85
85 65 10
But I want the aggregated value at cost senter level i.e.
CC1 300 245 420
CC2 160 90 95
I can not remove the Date frield from query as there is a formula variable defined on the date field.
Please let me know how to bring the report to the required format.
Bill
Message was edited by:
Bill BryanIf you are in new Bex, you can do it.
You will have to create another (set of) CKF on top of the current ones (which do exception aggregation on DOCNUM) and set the exception aggregation on date.
Say you have
CH1--CH2CH3--CKF1
To have a 'before aggregation' behavior for CKF1 when CH3 is not present, you will create a CKF2 = CKF1 with exception aggregation on CH3.
Now, if you want to remove CH2 and have the 'before aggregation' behavior you will need to create another CKF3 = CKF2 with exception aggregation on CH2.
ie for each level of aggregation, you will have to define a new CKF/Formula with corresponding exception aggregation - this is what will be needed to get you your output.
Message was edited by:
Ajay Das -
My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.
My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.
-
How to Check the report is Finished while calling a report from Forms 6i
Dear All,
I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
I need to copy the pdf to store it in another place once the report is generated.
My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
{code}
PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
lv_id varchar2(1000);
BEGIN
repid := find_report_object('AMTP_995.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed'); message('Report Completed');
else
message('Error when running report.'); message('Error when running report.');
end if;
END;
{code}
Any Helpactually My code is this:
declare
ln_alert number;
pl_id ParamList;
lv_report_name varchar2(10000);
lv_path varchar2 (100) := 'C:\';
lv_shared_path varchar2(1000);
lv_copy_file varchar2(10000);
cursor cr_dir_path IS
select v_dir_path
from md_directory
where v_dir_code ='SHR';
lv_file_name varchar2(1000);
BEGIN
open cr_dir_path;
fetch cr_dir_path into lv_shared_path;
close cr_dir_path;
lv_report_name := lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
if ffn_check_fields THEN
pl_id := Get_Parameter_List('LAI');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('LAI');
if :fn_cntl.nb_report_name ='MMAT_REPORT'
then
if :fn_cntl.nb_report_desc ='EXPORT'
then
Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'DESTYPE', TEXT_PARAMETER,'File');
Add_Parameter(pl_id, 'DESNAME', TEXT_PARAMETER, lv_report_name);
Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);
Add_Parameter(pl_id, 'p_ref_no', TEXT_PARAMETER, :fn_cntl.nb_ref_no);
Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
DECLARE
repid REPORT_OBJECT; v_rep VARCHAR2(100); rep_status varchar2(20);BEGIN
/* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
repid := find_report_object('MMAT_REPORT'); v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed'); message('Report Completed');
--copy_report_object_output(v_rep,'c:\local.pdf');
-- host('netscape c:\tlocal.pdf');
else message('Error when running report.');
message('Error when running report.');
end if;
END;
end if;
end if;
if :fn_cntl.nb_report_desc ='EXPORT'
then
error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
host(lv_copy_file,no_screen);
error_handler('Report Has been Generated Sucessfully.',3);
end if;
end if;
END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot... -
How to customize the Java Concurrent Program(PO Output for Communication)
Hi,
How to customize the Java Concurrent Program(PO Output for Communication)
I need to add the Line level Ship To Address ,Line Notes and Extended Price fields on Java Concurrent Program.
Please any body help/guide me in this regard.Hi,
Changing Java Conc. program for "PO Output for Communication" is difficult.
Actually, if you observe closely, "PO Output for Communication" program uses PO<HEADER/LINES..>_XML views.
So if you could change these views and add your requireed columns to it, you can automatically see your changes in XML data file.
See if the following link will you to get there.. http://chandramatta.blogspot.com/
thanks,
Matt -
How to design the report?
Hi,
how to change the filling data in report by vertical way?
for eg: i am creating a group (group by userId) and displaying user name and access rights info;
User Name Access Rights
TestUser Adminuser
TempUser NotanAdminuser
but i want in this format
UserName TestUser TempUser
AccessRights Adminuser NotAnAdminuser
how to design the report?i haven't tried using cross tab.
but my requirement is like...
Modified User Name ........ TestUser Thendral till 'n' number of users
Total NO of Patients..........10 5
Heart Failure...........5 1
Surgical..................1 2
Pneumonia 3 1
Chest Pain 1 1
till 15 rows
How to achieve this using crosstab?
Maybe you are looking for
-
Can't figure out problem with new PC
Hi all, I just built my first PC and everything's running pretty well with the exception of some lag and freezing. My mouse and keyboard sometimes lag behind my true movement. The mouse does this more often and will lag behind for a second before i
-
ABAP Program using Selection Screen in Process Chain
Hi, I have included an ABAP Program in the Process Chain. The ABAP Program takes a selection screen value from user before execution. I have created a variant for both the ABAP Process (YPV_ABC) and a variant for the Selection Screen (YPV_XYZ). The A
-
Preview doesn't open integrated links in PDF-Files anymore.
Is this a common problem with all Lion Users? Or have I forgot something in the settings panel? In Snow Leopard I clicked on the blue highlighted link in the PDF file and the link was opened via Safari.
-
WEBI Prompt [Report Filter] Vs Query Filter
Universe : OLAP Universe on BW Query BI 7.0 SP 15 Bobj xi-3.0 We have a BW variable for Plant on a webi report and if I use it the webi report runs in 10 seconds like BW query We have a webi prompt for plant [used to drill down from another report] a
-
My iPad has "zoomed in" whilst using "Pages"-now frozen in zoom
I was typing away...then suddenly the screen zoomed in and I could no longer see what I had been doing. I've tried navigating my way out of it using finger gestures...it doesn't work. Seems to be stuck in zoom. I've done a hard reset... no change. I'