How to cutomise the BC DS 2lis_03_bx it is not availabe at LBWE eventhough

Hi Friends,
i am tranfering the data source 2lis_03_bx from RSA5.But it is not available in LBWE to customise the cockpit. Is there any further proceder to to customise the cockpit
Thanks & Regards,
Shaliny.M

If you want to customize the cockpit this datasurce don´t have a customization option....if you want to initialize this datasource you must use the MCNB in order to load the data for initial Stock
You'll find very interestinf this links from Roberto Negro...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0ea8a990-0201-0010-2796-fa9ae8691203
http://help.sap.com/saphelp_nw04/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/frameset.htm
Message was edited by:
Oscar Díaz

Similar Messages

How to set the column table so it can not be moved !

how to set the column table so it can not be moved !

m_table.getTableHeader().setReorderingAllowed(false);
m_table.getTableHeader().setResizingAllowed(false);

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fualt lies at my end or at the other end

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end

If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself.

How accurate is the "Find my Phone" app, if not in a free wi-fi area could it bounce a 100/200 metres to the next nearest to show its location as being there instead?

How accurate is the "Find my Phone" app, if not in a free wi-fi area could it bounce the location of the phone a 100/200 metres?
Can there be technology glitches in fairly condensed areas?

I do not know about the UK, but the "accuracy" of the application in the US would not support a search warrant or confrontation. I have no specifics about the exact accuracy.
Barry

How to check the jms Queue is persistance or not in jboss application serve

hi,
i am using jboss as application server for jms and database is postgres.For an message store i am using the "*database store*".while starting the jms adding queue it is adding the messages to the jms queue after starting the jms receiver the datas are received sucessfully....afte some 10 to 13 hours i am getting java.lang.OutOfMemoryError in jms..so i checked the postgres table space.Table space is increased gradually...I think that the after receiver received that message the messages are not deleted in the database.how to debugg the the secnario in jboss as wel as in database.....how to chaeck the queue is in persistance or not persistance...
regards.
naresh govindaswamy.

Send a request to the server somehow, so that the server is aware of this. AJAX may be very useful in this if you want to do this asynchronously.
its very urgently This is irrelevant information. That's your problem. We don't care less or more. Some users here will even refuse to help you if you're putting pressure.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also.

My Ipad is not charging suddenly ? How to solve the problem? As well its not charging into the computer also

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to deactivate the rosetta option if it is not shown in information page

Hi,
by accident or why ever I clicked the option "start with rosetta" on my eyetv.app. STRANGE now the option is no longer viewable in information field and I can't start the application inside of the application folder because I get then the message "EyeTV can't run under Rosetta-Emulation" please deactivate the Option via Menu Ablage and unmark the option. BUT I can't see this option in information field. AND if i try to start the eyetv.app in an folder outside of applications it works.
Anyone an idea

Hi,
thank you for the hint with command+i BUT THIS DOES NOT help of course, because I already wrote that I used this.
I solved it now in different way which leads to a general question that somewhere the osx seems to note versions of programs and how to open them.
Description of this issue now in detail:
- I installed EyeTV in Version 3.0 on OSX 10.6 and started it.
- a message appears that this program is not made for this OSX version (it was made for 10.5)
- stupidly Elgato has no direct access to update from 3.0 to 3.1.2 which works with 10.6 WHICH means EyeTV has a buildin update BUT is useless if you can't start this app
- OK this leads me to idea to enable the "Start with Rosetta option"
- Didn't work
- I took then an 3.1.2 Version from my TimeMachine Backup and copied it over the old ones
- tried to start it and the message appear "This cannot run in Rosetta Mode"
- HERE IT COMES the little option field where you can disable or enable Rosetta in the information of the eyetv 3.1.2 is not shown so I was unable to disable it of course
- so i copied the file to a different directory and it works there normally
- ..... AFTER 2 hours i remembered that I had set the "Start with Rosetta" option on version 3.0 and the Snow Leopard seems to have noted this somewhere and i need a trick to see this option and the only way is to use a version 3.0 file maybe the option will appear there again
- ok copied Version 3.0 over the 3.1.2
- AND AH the rosetta option appears and was enabled and I had here the possibility to disable or unmark it
- then copy back the 3.1.2 Eyetv version file and AH it runs
So imagine that someone else uses today an application which really needs rosetta, and a user activates this and after some month a Snow Leopard 64bit version comes and nobody tells the user to deactivate the rosetta version on old package before installing new one.... poor user, I guess the 64bit version will tell the crap "This application can't run under rosetta" and the user will never find the way to disable it.
Hope there is a better way to find out for which application in which version was set the "start with rosetta" option in the system.
IF ANYONE KNOWS PLEASE let me know

How to know the PO Created with RFQ or Not..??

Hi MM Gurus,
How to know the purchase order created with one quotation or not. because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation. i created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying. so how to knows once PO cretd with Quotation or not. . and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

Hi Pradeep. Thanks for the mail.
the problem is ....with *quotation...*
How to know the purchase order created with one quotation or not.
because when i am trying to create PO with /ME21N through DOcumen Overview on. there is list of Quotation.
I created PO with XYZ quotation. and after creation of PO i am trying to create another PO with another quotation but in that list still XYZ quotation is Displying.
so how to knows once PO cretd with Quotation or not. .
and I dont wanted to disply quotation once created Po.
Thanks in Advance.
N.A.Reddy

How to solve the error HTTP/S connection was not obtained successfully?

Hi,
I got a problem when i am trying to connect SAP ECC 6.0 system from SAP NETWEAVER EP 7.1 as below
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (vrleccdv.vrpl.com:8000)
6. The host name vrleccdv.vrpl.com was resolved successfully.
7. An HTTP/S connection to http://vrleccdv.vrpl.com:8000/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
can anyone suggest me how to solve this porblem

Hi Ramana,
In the Backend system pls check whether the service WEBGUI is activated or not.
This will help solve the problem.
Cheers-
Pramod

How to read the alert_log_file regarding log applied(or)not?

Hi all,
I need to know from alert_log_file
1.whether the archive log applied to Stand-by DB or not?
2.And how to rectify the below errors.
Current log# 2 seq# 6360 mem# 0: /ovsd/dbs/redo02.log
Sun Jan 29 12:59:01 2012
ARC1: Beginning to archive log 4 thread 1 sequence 6359
Creating archive destination LOG_ARCHIVE_DEST_2: 'OVSDSTBY'
ARC1: Error 3113 Creating archive log file to 'OVSDSTBY'
Sun Jan 29 12:59:01 2012
Errors in file /oracle/admin/ovsd/bdump/ovsd_arc1_3834.trc:
ORA-03113: end-of-file on communication channel
Creating archive destination LOG_ARCHIVE_DEST_1: '/archive/ovsd/archive-ovsd_1_6359.arc'
ARC1: Completed archiving log 4 thread 1 sequence 6359
Sun Jan 29 13:04:49 2012
ARC0: Begin FAL archive (thread 1 sequence 6359 destination OVSDSTBY)
Creating archive destination LOG_ARCHIVE_DEST_2: 'OVSDSTBY'
Sun Jan 29 13:10:27 2012
ARC0: Complete FAL archive (thread 1 sequence 6359 destination OVSDSTBY)
Sun Jan 29 23:34:08 2012
Thread 1 advanced to log sequence 6361
Sun Jan 29 23:34:08 2012
Current log# 1 seq# 6361 mem# 0: /ovsd/dbs/redo01.log
Sun Jan 29 23:34:08 2012
ARC0: Evaluating archive log 2 thread 1 sequence 6360
Sun Jan 29 23:34:08 2012
ARC0: Beginning to archive log 2 thread 1 sequence 6360
Creating archive destination LOG_ARCHIVE_DEST_2: 'OVSDSTBY'
Creating archive destination LOG_ARCHIVE_DEST_1: '/archive/ovsd/archive-ovsd_1_6360.arc'
Sun Jan 29 23:40:17 2012
ARC0: Completed archiving log 2 thread 1 sequence 6360
Mon Jan 30 03:00:05 2012
Errors in file /oracle/admin/ovsd/udump/ovsd_ora_3354.trc:
ORA-00600: internal error code, arguments: [xsoptloc2], [4], [4], [0], [], [], [], []
Mon Jan 30 09:50:06 2012
Thread 1 advanced to log sequence 6362
Mon Jan 30 09:50:06 2012
ARC1: Evaluating archive log 1 thread 1 sequence 6361
Mon Jan 30 09:50:06 2012
Current log# 3 seq# 6362 mem# 0: /ovsd/dbs/redo03.log
Mon Jan 30 09:50:06 2012
ARC1: Beginning to archive log 1 thread 1 sequence 6361
Creating archive destination LOG_ARCHIVE_DEST_2: 'OVSDSTBY'
ARC1: Error 3113 Creating archive log file to 'OVSDSTBY'
Mon Jan 30 09:50:06 2012
Errors in file /oracle/admin/ovsd/bdump/ovsd_arc1_3834.trc:
ORA-03113: end-of-file on communication channel
Creating archive destination LOG_ARCHIVE_DEST_1: '/archive/ovsd/archive-ovsd_1_6361.arc'
ARC1: Completed archiving log 1 thread 1 sequence 6361
Mon Jan 30 09:55:21 2012
ARC0: Begin FAL archive (thread 1 sequence 6361 destination OVSDSTBY)
Creating archive destination LOG_ARCHIVE_DEST_2: 'OVSDSTBY'
Mon Jan 30 10:03:42 2012
ARC0: Complete FAL archive (thread 1 sequence 6361 destination OVSDSTBY)
-------------------------------------------------------------------------------------------------------------------------------------------------------------

You can't find archive logs applied or not of standby database in primary alert log file.
Of course you can see in standby alert log file as "media recovery log thread <thread#> <sequence#>"
You have internal errors in alert log file. Use error lookup tool for internal errors for any listed bugs. If not please do submit alert & trace files to support by SR.
ORA-600/ORA-7445 Lookup tool. Note 1082674.1
HTH.

How to check the given path is existing or not using sp_cmdshell

Hi All,
I am passing one path to the stored procedure, before executing code i want to check whether the path is given existing or not .
By using sp_cmdshell we can know whether files are there are not but in case of my scenario i want to know the directory(folder) is existing or not because the source folder may be blank so it will not get the files there so stored procedure returning the
File Not found as output.
following is the code i am trying to retrieve this please suggest any other way to solve it.
Create table #tableExists (isValid varchar(255))
Declare @path varchar(255)='DIR "C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA "/B'
INSERT INTO #tableExists
EXEC xp_cmdshell @path
select * from #tableExists
Regards,
Niraj Sevalkar

You can try the other two undocumented extended stored procedures as well:
--EXEC master.dbo.xp_subdirs @pathName
EXEC Master.dbo.xp_fileexist @pathName
EXEC Master.dbo.xp_DirTree @pathName,1

How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

Hi all,
I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
I performed reset crawl index of Search service application and then performed a full crawl.
But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
Thanks in advance.

Are you seeing any error messages in the URL related to the Gatherer? And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues. The Eventvwr and ULS logs should help you narrow down the real problem.
Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

How to set the value of an array element (not the complete array) by using a reference?

My situation is that I have an array of clusters on the front panel. Each element is used for a particular test setup, so if the array size is three, it means we have three identical test setups that can be used. The cluster contains two string controls and a button: 'device ID' string, 'start' button and 'status' string.
In order to keep the diagrams simple, I would like to use a reference to the array as input into a subvi. This subvi will then modify a particular element in the array (i.e. set the 'status' string).
The first problem I encounter is that I can not select an array element to write to by using the reference. I have tried setting the 'Selection s
tart[]' and 'Selection size[]' properties and then querying the 'Array element' to get the proper element.
If I do this, the VI always seems to write to the element which the user has selected (i.e. the element that contains the cursor) instead of the one I am trying to select. I also have not found any other possible use for the 'Selection' properties, so I wonder if I am doing something wrong.
Of course I can use the 'value' property to get all elements, and then use the replace array element with an index value, but this defeats the purpose of leaving all other elements untouched.
I had hoped to use this method specifically to avoid overwriting other array elements (such as happens with the replace array element) because the user might be modifying the second array element while I want to modify the first.
My current solution is to split the array into two arrays: one control and one indicator (I guess that's really how it should be done ;-) but I'd still like to know ho
w to change a single element in an array without affecting the others by using a reference in case I can use it elsewhere.

> My situation is that I have an array of clusters on the front panel.
> Each element is used for a particular test setup, so if the array size
> is three, it means we have three identical test setups that can be
> used. The cluster contains two string controls and a button: 'device
> ID' string, 'start' button and 'status' string.
>
> In order to keep the diagrams simple, I would like to use a reference
> to the array as input into a subvi. This subvi will then modify a
> particular element in the array (i.e. set the 'status' string).
>
It isn't possible to get a reference to a particular element within an
array. There is only one reference to the one control that represents
all elements in the array.
While it may seem better to use references to update
an element within
an array, it shouldn't really be necessary, and it can also lead to
race conditions. If you write to an element that has the
possibility of the user changing, whether you write with a local, a
reference, or any other means, there is a race condition between the
diagram and the user. LV will help with this to a certain extent,
especially for controls that take awhile to edit like ones that use
the keyboard. In these cases, if the user has already started entering
text, it will not be overwritten by the new value unless the key focus
is taken away from the control first. It is similar when moving a slider
or other value changes using the mouse. LV will write to the other values,
but will not rip the slider out of the user's hand.
To completely avoid race conditions, you can split the array into user
fields and indicators that are located underneath them. Or, if some
controls act as both, you can do like Excel. You don't directly type
into the cell. You choose w
hich cell to edit, but you modify another
location. When the edit is completed, it is incorporated into the
display so that it is never lost.
Greg McKaskle

File upload....How to find the user entered any file or not

Hi Team,
I am working on with file upload UI.
Some times without clicking on browse button, I mean without entering any file they are cliking on upload button, which is giving the exception.
I know there is no action for UI element, Then how to resolve this?
I just control the user, not to press the upload button without entering any file name there?
How to resolve this?
regards,
Bala

Hi,
This code will solve ur problem.
public void onActionUploadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUploadFile(ServerEvent)
    IWDAttributeInfo attributeInfo = wdContext.getNodeInfo().getAttribute(IPrivateFileUploadDownloadView.IContextElement.FILE_RESOURCE);
    IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType)attributeInfo.getModifiableSimpleType();
    IPrivateFileUploadDownloadView.IContextElement element = wdContext.currentContextElement();
    if(element.getFileResource() !=null)
         try
              String mimeType = binaryType.getMimeType().toString();
              byte[] file = element.getFileResource();
              //element.s
              wdComponentAPI.getMessageManager().reportMessage(IMessageFileUploadDownloadComp.SF__UPLOAD,new Object[] {binaryType.getFileName()},false);
         catch(Exception e)
              throw new WDRuntimeException(e);
    else
          wdComponentAPI.getMessageManager().reportMessage(IMessageFileUploadDownloadComp.NO__FILE,new Object[] {" "},true);
    //@@end
Here "fileresource" is context attribute name
Regards,
Sunaina Reddy T

How to cutomise the BC DS 2lis_03_bx it is not availabe at LBWE eventhough

Similar Messages

Maybe you are looking for