How to deactivate Flash on Mac?

Are there plugins to move to deactivate flash player for Safari (assume Tiger)?
Thank you, Karl

Safari > Preferences > Security
Uncheck the box beside "Enable Plug-ins".
or
Uninstall Adobe Flash Player:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

Similar Messages

How to deactivate a stolen Mac book

A Mac book was stolen and is it deactivated by serial number?

If you had find my mac activated through iCloud, you would be able to locate it if it was online and hasn't been wiped and then you have the ability to remotely wipe the computer that way.

How to deactivate PSE 11 on a Mac

Hello,
I'm trying to deactive photoshop elements 11 on a Mac but there is no deactivate button on the Help.
Can someone tell me how to deactivate PSE 11 so i can use it on my new Mac.
Thanks,
Judith.

Thank you Barbara. I managed to deactivate it.
Greets, Judith

Trying to install CS6 on new iMac. i uninstalled photoshop from my old mac, but didn't deactivate. how to deactivate. i have the serial number

i'm trying to install Cs6 on my new iMac. i've uninstalled on my old mac but didn't deactivate first. how to deactivate the old computer?

contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html
request an activation count reset.

My iMac has died with a copy of Creative Suite 5.5 on it, can anyone tell my how to deactivate this copy so I can install on another Mac?

My iMac has died with a copy of Creative Suite 5.5 on it, can anyone tell my how to deactivate this copy so I can install on another Mac?

Contact support by web chat to reset activations.
Mylenium

HT1366 How to fix Flashing Folder with Question Mark on Mac

How to fix Flashing Folder with Question Mark on Mac

RichardEL is probably correct. I’ll go through your questions.
> there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not. The System Disk partition would be below the HD icon indented to the right. It is usually called “Macintosh HD” unless you renamed it.
> when I go into disk utility my HD appears on the left, but I can repair or verify it
Odd. It appears but you cannot manipulate it with Disk Utility.
> The S.M.A.R.T status reads verified
If it did not say Verified then it would indicate a problem. Saying Verified does not rule out problems but I think it indicates it is still breathing.
> Is the HD deceased?
If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing. If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
> [If I] restore from time machine [will] everything will be back as it was before?
Yes. That is the beauty of Time Machine. All your data, applications, and system preferences will be as they were as of the last backup.
> I was thinking of erasing the HD, would this be of any help or do I just need a new one?
Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk. Before proceeding it may be useful to have an expert at an Apple store look at it for you. They may be able to revive it without a clean install or new disk.
As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help. To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk. Here are links to the screwdrivers and enclosure you would need.
$5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
$22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition. Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros. This will write to every sector to map out bad blocks. (If you have an SSD do not write a pass of zeros.)
If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly. Google “Seagate 1 TB hybrid SSHD”.

How to load Flash component on a Mac Native Window

Hi, I have a application working fine on Windows, Have Flash
component loaded on PC window and send and receive event through
C++, But I dont have any idea how to do it on Mac, I have used MFC
etc in PC to display the Flash component on it but how can I do the
same on Mac, Basically I require a Mac window to host a Flash
Component with some other media components and being able to send
and receive events in C++ to and fro on Mac window.
Thanks

Converting a Lightweight Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272

How to perform a classic Mac OS search in Tiger

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
In an this post I will describe how to perform a classic Mac OS search and give example results. You may perform the search with or without the spotlight database. This search falls under the smart folder implementation introduced with Tiger. I have done all my testing with Mac OS 10.4.11. I assume this will work with any version of Tiger or Leopard.
The results will be slightly different with a spotlight database on the partition and without a database on the partition. With a database, you will not see Unix hidden files. You may be able to use all of the spotlight special find features. I did not test much with the spotlight special fields. Without a database, using the special features nulls out the search and the "Search for" field seems to give the same result as using the name field.
This search technique was obscured by all the hoopla over spotlight. Authors of Tiger books avoided mentioning the Classic search interface. When I looked in Leopard books I noticed some authors put back information on the Classic search interface.
For testing I created these files
For testing I created a test "z-find" folder on my Macintosh-HD, containing files and folders with various attributes, then copied it over to my Spotless flash drive. This means both searches searched for the same file names.
I put these files on my Macintosh-HD and Spotless partitions.
Here is the list of files:
!http://farm3.static.flickr.com/2122/3746333451_36daa677f8.jpg?v=0!
Here is the list of files again:
.bash-backup-copy-initial-dot-copy.html
.bash-copy-initial-dot/
    bash-backup-inside-bash.html
    ping_command_as_Give.html
bash-backup-copy-invisible-attr.html
bash-backup.html
bash-batChmod.html
bash-battery__yellow__4k.html
bash-copy/
    bash-backup-inside-bash-copy.html
    ping_command-bash-copy.html
bash-copy-invisible-attr/
    ping_command_as_Give.html
bash-folder__green/
    ping_command_as_Give.html
Perform the Classic Mac OS search with a Spotlight database.
{color:red}By Classic Mac OS search I mean a search on the filename and the results shown in list format.{color} How do you get to this interface?
*Click on the Desktop to access the Finder.*
*Click on File then click on Find. (Command-F)*
Pick what folder you wished to search. With Tiger you can click on Others... to select a folder. Click on the plus sign to select the folder you wish to search. Be sure the selected folder in the list is the only one checked. In the first example I picked: /Users/mac/Desktop/iMac/z-find/
{color:purple}The "Search for" field on the first line is used for spotlight. Avoid using this box.{color}
*Click on the double arrow to the right of the first option (Kind). Go down to the name field.*
*Change the 2nd pop down field to Contains.*
*You can now search for the contents of a filename.* I searched for name contains: bash-
To see the Classic display format, click on the three line icon which is located on the upper left of the window (list view). There is a small refresh icon on the lower right of the window.
!http://farm4.static.flickr.com/3485/3240587496_741476de7b.jpg?v=0!
This is the result of the search with a Spotlight database:
bash-backup-copy-invisible-attr.html
bash-backup-inside-bash-copy.html
bash-backup-inside-bash.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-copy-invisible-attr    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
You can create a smart folder to take you directly to the search panel. Just click on the Save icon to the right of the window near the top. For readers of books, you should look under smart folders.
!http://farm4.static.flickr.com/3498/3239759755_d5ebbefe05.jpg?v=0!
There are some downsides. Initially, the search will find both visible and invisible Mac OS files. However, the search seems to get confused between visible and invisible files when you select the visibility option. It seems to get the visible correct when you use visible but when you add invisible things get confused. Sometimes it will find invisible files and sometimes it won't. I used both the Unix invisible files and the Mac OS X visiblity attribute.
In putting the same search in the upper right-hand-corner spotlight search and in the Search for field, I did not get the same results. The spotlight search returned a 182 items while the with Search for field returned 179 items. The Search for field seemed to miss items in the mail boxes. With the Search for search you could display spotlight results in the classic format.
I did a successful search on my fat32 flash drive.
Perform the Classic Mac OS search without the spotlight database.
If you turn off spotlight indexing on a volume and delete the spotlight index, then Mac OS Tiger reverts to the prior Mac OS search facility. In the preferences for spotlight, you let searching continued on the partition.
Here is what I did:
I installed the spotless application.
http://www.fixamac.net/software/spot/
I use spotless to configure spotlight. Click on disabled indexing then click on delete index files.
!http://farm4.static.flickr.com/3527/3239751839_c760c46628.jpg?v=0!
Spotless creates the .Spotlight-V100 directory with the _IndexPolicy.plist and _rules.plist to prevent indexing on the partition.
I performed the search for files containing "bash-" in the name field.
!http://farm4.static.flickr.com/3430/3240587902_171d8d46c3.jpg?v=0!
This is the result of the search without the Spotlight databases:
bash-backup-inside-bash-copy.html
bash-backup.html
bash-batChmod.html
bash-battery_yellow_4k.html    {labeled with the Yellow attribute}
bash-copy    {folder}
bash-folder__green    {folder and labeled with the Green attribute}
ping_command-bash-copy.html
Limitations:
Does not search in Unix hidden folders. That is folders beginning with a period (.) .
Sometimes will find files beginning with a period (.).
Does not find Mac OS invisible files.
Using the special features nulls out the search.
The Search for field seems to give the same result as using the name field.
Related tips:
• More hints by Baltwo
http://www.macosxhints.com/article.php?story=20050501162147222
•Spotlight in Leopard has been enhanced. See these articles for details:
See http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by the default structure.
• FindAnyFile
"Contrary to Spotlight, it does not use a database but instead uses the file system driver's fast search operations."
http://apps.tempel.org/FindAnyFile/index.html
• Use the terminal find command to list files from multiple directories.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -exec ls -dF {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy/
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr/
/Users/mac/Desktop/iMac/z-find/bash-folder__green/
mac $
• You can use the Terminal to search the contents of a file.
You need to combine the find command with the grep command. I am searching for the word pdisk where file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find". The symbols {} \; are needed after the word to search. See:
man find
man grep
for cryptic details.
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ find ~/Desktop/iMac/z-find -iname "*bash-*" -type f -exec grep -bil 'pdisk' {} \;
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
• findfile
"Here’s a simple command-line tool which uses FSCatalogSearch to search for files by name.
usage: findfile -r <volume> <name> "
Here is where to find: findfile.
http://cocoacafe.wordpress.com/2007/06/17/fscatalogsearch/
I am searching file names containing "bash-" in the directory "/Users/mac/Desktop/iMac/z-find".
Macintosh-HD -> Applications -> Utilities -> Terminal
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" |\
additional input: grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery_yellow_4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
Robert
This is the 1st version of this tip. It was submitted on July 31,2009 by rccharles.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x.

My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!

you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/

Flash cs4 mac - Error opening URL '/:Users:someting.swf' - Not a "loading external content" problem

Hello.
I am having a weird problem when trying to test a movie or publish preview -> flash on mac with Leopard os.
The result is a blank movie with the usuall "movie not loaded" if u right click on it and the output returns the "Error opening URL 'the path of the swf here'.
This has nothing to do with loading external files or something like that. It happens even in blank movies and it gives the same error if I try to open a swf from flash ide.
I can publish the project or export the movie with no problem at all.
I can preview the movie in html. I can run all the swf files in my hard disk, network, usb stick, dvd etc., but when I try to open any of these files from flash ide I got that stupid error.
Its not something that stops me from working in flash ide but its slow to export movie any time I want to test it.
Things that I've tried so far but nothing worked:
Update the flash cs4 to the latest version
Update the flash players
Restored the release flash player as default player (I am using as default the debug player)
Cleared the preferences
Move the flash cs4 folder to another location in hd
Saved the fla document first before testing the movie (in different places with or without spaces in document name or folder)
Give read & write permissions for everyone for flash.app, players and for fla files when saved first before test movie
Unistall and install the application 3-4 times.
Test every as version just in case.
Also I've checked the folders when testing movie and I can see that it creates an swf file, which I can run it outside flash ide (the one that the flash ide player cannot load) with no problem.
The mac os has the default set up as it came. Nothing chnaged in permissions or security settings.
Thanx in advance.

In this particular example I am using this code to start the
xml file load:
// now load the XML file that contains the content strings
var sXMLFile:String = "xml/home.xml";
var xmlContent:XML = new XML();
xmlContent.ignoreWhite = true;
xmlContent.onLoad = onXMLLoadComplete;
xmlContent.load( sXMLFile );
But I don’t think the code is the problem here . This
happens on every file I load when I am using a relative path to the
content, regardless of how I load the content (XML object,
loadMovie, MovieClipLoader, etc…) and the same code executes
perfectly on every other machine in the office(Mac and PC).
I’m more concerned with the semi-colons and .swf filename
that Flash is putting into my relative path on the error message.
Is that normal?

NEED HELP!!! Flash Animation (MAC) play back on PowerPoint (PC)

NEED HELP!!! Flash Animation (MAC) play back on PowerPoint
(PC)
Shockwave Flash Animation is complete.
We want to change the Flash Animation w/video (MAC) files to
QuickTime files.
Then change the QuickTime files using Adobe Premiere®
Pro CS3 to an MPG level 1 file (not level 4)
Must be expert in:
Shockwave Flash Animation (MAC)
QuickTime (MAC)
Adobe Premiere® Pro CS3 (MAC or PC)
AdobePowerPoint (PC)
Virtual,Telephone or inperson heip on how to make a Shockwave
Flash Animation (MAC) play back on PowerPoint PC

(This is the Adobe Scout forum for game developers, you should try the Flash Player forum)
To install Flash Player, try this link: http://get.adobe.com/flashplayer/

Do you know how to use Flash? can you help?

hi all,
Do you know how to use Flash?
I have been trying for months to find someone who can use
flash, who can help me, with no luck.
I need my links on my website updating, just a couple of them
need the text changing as i need
to change the name/title of some pages. I have tried to do it
myself (using a trial version of flash,
as i dont have flash). the site was made using dreamweaver.
the files are .FLA
and before anyone says 'get the person who made the site to
do it'....He wont, ive tried.
when i tried to change them myself i cocked them up and now
they dont work at all, see my
website and you will see; www.stevenallenphotography.co.uk
so, if you can use flash please can you help me? all i need
doing is the file updating with some
of the link titles/names changing, i.e. one link is
'exhibitions' which needs changing to 'published work',
please get in touch if you can help.
thanks,
steven.

I used divx in my site once its really very nice! but i use it in different host not .mac...try this divx web player with video selector code --------<object id="ie_plugin" classid="clsid:67DABFBF-D0AB-41fa-9C46-CC0F21721616"
width="640" height="480"
codebase="http://go.divx.com/plugin/DivXBrowserPlugin.cab">
<embed id="np_plugin" type="video/divx"
width="640" height="480"
pluginspage="http://go.divx.com/plugin/download/">
</embed>
</object>
<script type="text/javascript">
// This code detects which browser we are
// running into (IE or others) and assigns
// the correct element (object or embed) to
// the "plugin" variable, that we will use.
var plugin;
if(navigator.userAgent.indexOf('MSIE') != -1)
plugin = document.getElementById('ie_plugin');
else
plugin = document.getElementById('np_plugin');
// This is a local JS function used by our form
// element to call the plugin functions using
// the "plugin" variable that we defined above
function openNewMovie()
var url = document.forms['videoSelector'].movie.value;
if(url != '')
plugin.Open(url);
</script><form name="videoSelector">
Choose a video to play:
<select name="movie" onChange="javascript:openNewMovie();">
<option value="" selected>Video Selector
<option value="http://www.yourdomain.com/folderdivx/name.divx">title1 divx
<option value="http://www.yourdomain.com/folderdivx/name.divx">title2 divx
</select>
</form> ---------------------
Hope this help!

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

Urgent - How to deactivate the popup reminder window

I want to know how to deactivate the reminder popup window when you restart a Captivate movie.
I have an application made with Flash that load in wrapper some captivate movie. When i load a movie that i 've just loaded before, a popup reminder window with "do you want to continue from last slide..?" appears. How can I deactivate this popup? Or Is it possible to change the language text of this window?
Thank you very much for your help

I believe that is controlled by the 'self paced learning' option in the table of contents settings.
in windows, Project > Table of Contents > Settings (under the list of the TOC)

HT5312 how do i open my mac, iam trying to open it but its only showing a question mark

how do i opem my mac, am trying to open it but its only showing a question mark

The question mark can mean several things. One the drive is failng, or has failed, or your Mac can't find a system folder to boot from.
Try booting while holding down the Option key. If the drive is available, it should show up in the Startup Manager window.
Read here > A flashing question mark appears when you start your Mac

How to deactivate Flash on Mac?

Similar Messages

Maybe you are looking for