How to deactivate nterfaces triggering from ECC to SRM (Plan driven scenario)
Hi SRM Friends,
If I check in SXMB_Moni, I could see outbound interfaces which are triggering from from ECC to SRM.
Please guide me how to deactivate these XML messages.
We are not using EPRTRANS table, not maintaining V_T160 tables.
I don't know where to check further to deactivate this Plan driven scenario. Please suggest
Best Regards,
BV Babu
Dear Rahul,
Thanks very much for the reply.
Would like to inform you that we had to maintain an internal custom table entry to solve this issue.
This is related to a workflow issue. WF triggered unnecessarily... this caused triggered XMLs.
Regards,
Babu
Email : [email protected]
Similar Messages
-
How can we replicate UOM from ECC to SRM.
Hi ,
In ECC I have assign ISO code against the UOM.
I have replicate ISO code from ECC to SRM. But unable replicate UOM.
How can we replicate UOM from ECC to SRM?
Thanks with regards
SachinHi Sachin,
UOM are uploaded in SRM through object DNL_CUST_BASIS3. It's part of master data replication.
You should refer following link, it will give you idea how to load mentioned object in SRM:
MASTER DATA REPLICATION: SETTINGS
I hope it helps.
Regards, -
Central Contract Mngt: Contract Confirmation Out not triggering from ECC
Hi,
Can some one take a look at this and let me know if you have any suggestions
After following note 1268821 we have Contracts replicating from SRM to ECC via PI. However we are not getting the Contract Replication Confirmation Out triggering from ECC to SRM The configuration in PI is waiting to receive PurchasingContractSRMReplicationConfirmation_Out from ECC for delivery to PurchasingContractSRMReplicationConfirmation_In in SRM.
Does anyone know what we maybe missing, perhaps a setting in ECC that will trigger the Confirmation Out to SRM?
Any help much appreciated.
CheJust an update.
It turns out that ECC is generating message PurchasingContractERPConfirmation_Out which is contrary to what we are expecting PurchasingContractSRMReplicationConfirmation_Out.
Have logged it with SAP support for now. -
How to deactivate other phones from using my itunes account
Please help how to deactivate other phones from using my itunes account?
Hello Kirstyspencer
I would sign out of your Apple ID on those devices and also change the password to your Apple ID. That should stop people from accessing and using your Apple ID.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
Regards,
-Norm G. -
How to deactivate a license from a dead hard drive
how to deactivate a license from a dead hard drive
You can't. However, Support or chat may be able to help you reset the activations.
-
How to deactivate stocks report from pull down?
how to deactivate stocks report from pull down bar?
Unlock the phone so the home screen displays.
Pull down the notification screen.
Select the "Today" tab.
Scroll down to the "Edit" button. -
By using middleware how data can be passed from ecc to crm?
By using middleware how data can be passed from ecc to crm?
Hello,
If middleware setup is done for the data exchange between ECC and CRM, then you can use customizing objects
(available in txn R3AC3) and business objects (available in txn R3AC1) , and condition/pricing related objects in available in txn R3AC5, which can be used for extracting data from R/3 to CRM. You can also find some upload objects for uploading the data
from CRM to R/3.
You can use transaction R3AS, to perform the initial load of customizing/Biz objects.
Once initial load is done, any delta changes would come automatically to CRM by means of delta load.
You also have request load, using which you can download range of materials/BPs which are missing or needs to be updated in CRM.
If you have any specific questions, let me know.
Hope this helps!
Best Regards,
Shanathala Kudva. -
How to get G/L account and cost centres from ECC to SRM...
Dear All,
How to get G/L account and cost centres from ECC to SRM...
Please let me know the steps...
Thanks
RaviHi
GL account - You can define in SPRO- Cross application settings--Account assignment ->Define GL account for product category and account assignment category.
or you can use BADI BBP_DETERMINE_ACCT.
In Organisation Strucute - You can Map the backend cost center via KNT cost center attribute .
Regards
Muthu -
How To Deactivate Adobe Audition From Old PC Online
How To Deactivate Adobe Audition From Old PC Online. Couz I Have sold The Old PC and Forgot To Unistall
Hi Vicky,
Here you go: Contact Customer Care
Thanks,
Kevin -
Hi ,
I'm trying to transfer data from ECC to SRM for creating bid document ( Function : BBP_PD_BID_CREATE ). After transferring the data I want to get the data back to ECC ( I need bid document number to write on delivery document's field ). What's the best way to do this ?
Regards.Hi vinit ,
I've written code to call 'BBP_PD_BID_CREATE' in ECC. But ECC and SRM have different structures. So i am not sure how i can define data to send SRM.
Here is my code in ECC program
CALL FUNCTION 'BBP_PD_BID_CREATE' IN BACKGROUND TASK
DESTINATION 'XXX'
IMPORTING
I_REF_GUID =
I_BAPIMODE =
I_PARK =
I_SAVE =
I_TESTRUN =
I_HEADER = I_HEADER ?
IT_ATTACH =
IT_DYN_ATTR =
IT_CONDITIONS =
EXPORTING
E_HEADER = E_HEADER ?
ET_ATTACH =
ET_DYN_ATTR =
ET_CONDITIONS =
TABLES
I_ITEM =
I_PARTNER =
I_LONGTEXT =
I_SDLN =
I_ORGDATA =
I_HCF =
I_ICF =
I_TOL =
I_WEIGHT =
IT_EXCHRATE =
E_ITEM =
E_PARTNER =
E_LONGTEXT =
E_SDLN =
E_ORGDATA =
E_HCF =
E_ICF = -
Modify vendor number when replicating vendor master data from ECC to SRM
Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
DavidHi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban -
Vendor Sync Job not updating all vendors from ECC to SRM
The vendors are updated from ECC to SRM by batch job
Z_SUP_BAT_VENDORSYNC (object BBP_VENDOR_SYNC).
This job is missing updation of some vendors from ECC to SRM.
Its happening on and of.We are updating these leftout vendors manually by TCODE BBPUPDVD and new left out vendors by BBPGETVD.
We have concluded that information in these vendors is replicated from
ECC to SRM GUI but it is not reflecting in SRM portal.
Reasons looks like when vendor data(Incoterms/Payment terms) is replicated from ECC to SRM an
addition row is created in vendor data in SRM which does have this information(Tcode ;BBPMAININT).
Though the information is present in second row in vendor data tab of vendor information when executed using TCODE BBPMAININT but Vendor information in portal is picked from 1st row and does not appear when try to shop.
Can anyone suggest how to resolve this?Hi Harleen,
The problem is because of the inconsistency in the tables BBPM_BUT_FRG0060 and BBPM_BUT_FRG0061.
From table BUT000 take the partner guid for the problematic vendor.
Enter the partner guid as input to the table BBPM_BUT_FRG0060 . check the number of available rows.
Now check the table BBPM_BUT_FRG0061 with the partner guid. check the number of rows.
You must see the inconsistent number of records in these 2 tables for the partner, like 1 row in BBPM_BUT_FRG0060 and 2 rows in BBPM_BUT_FRG0061.
Delete the invalid row in the table BBPM_BUT_FRG0061. That should resolve the problem you are facing.
Regards,
Sapna -
Transfer of PR from ECC to SRM
Hi experts,
I am new to SRM & my questions can be bit easy. We have implemented PDP & while transferring the PR from ECC to SRM, the PR got stuck in sxmb_moni in SRM. Now when i see the error /sappo/ppo2 it shows "cannot save template: Insert Items".
I have checked the Org. Structure and i think the attributes defined to the RFC_USER is also correct because i can create the shopping cart without an error from this user.
So please help me.
Thanks & Regards
Himanshu singh phartyalHi,
Would you please apply note 1821480 and retest the issue with a new PR?
Regards,
Ivy -
Transfer of non-valuated materials from ECC to SRM
I kindly request your help with an issue that I am facing.
The scenario is as follows :
1. There is a non valuated material X (material type UNBW).
2. MRP run happens and generates a PR with account assignment U.
3. Transfer report BBP_EXTREQ_TRANSFER is executed in order to transfer the PR to SRM.
4. The PR reaches SRM, but the SC is not created instead in SLG1 there is an error thrown, "No account assignment exist. Enter an account assignment".
5. In the backend now If I try to change the PR i get the error " 6Q204 (Procurement profile 36 cannot be changed).
Is this scenario supported ?? i,e, transfer of non-valuated materials from ECC to SRM.
Kindly let me know if you have any idea on this.Hi,
As per your query you have not determind accounts assignment. Please do these activity.
Please see the below link.
http://help.sap.com/saphelp_srm30/helpdata/en/a9/cde93a2876a81ae10000000a11402f/content.htm
Regards,
Anil -
Vendor Transfer from ECC to SRM-EBP
I want to transfer vendor from ECC to SRM-EBP.I tried the T code BBPGETVD. But I am getting the below log:
"Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: 0000100011".
Please suggest.Hi
I have seen this error. However kindly check in SRM side
In BP transaction 0000100011. Is this vendor is vailable or not.
OR
do some cosmetic change in this vendor in XK02 and when you run BBP_VENDOR_sync REPORT BRINGS you this vendor in SRM
Muthu
Maybe you are looking for
-
My Mac is running slow. Advice from former discussions not helping.
I'm a reformed Windows user and love my MacIntosh but is has been giving me problems lately. It has slowed down extremely over the last few months. From everything I've read this is NOT from malware. I was beginning to think it was from me moving
-
Unable to get the connections due to access denied error.
Hi All, I am trying to use my adapter in WebLogic Server 7.0 and get the following exception while requesting for a connection by doing getConnection. The ex is as follows - <May 23, 2002 11:08:22 AM PDT> <Erro
-
I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?
-
File does not begin with '%PDF-'.
Please help, all was going fine with our adobe reader and all of a sudden this message started popping up. Here are details: -Windows 7 64 bit home -Adobe Reader 9 Version 9.3.0 -IE 9 32 Bit I have tried installing/uninstalling every possible versio
-
Sub-filtering in iTunes 10.6 Smart Playlists
Okay, quick question which I just cannot seem to figure out for the life of me, in prior versions of iTunes I was able to create sub-criteria for playlists. For example, see below... As you can see, I have an "all" the the following rules, but then h