How to deactivate one of our computers that has been destroyed by a tornado.

I have one computer that I have the cloud on and works fine but my other computer got sucked up by the tornado. How do I deativate a computer I don't have in order to put it on a new one.

Hi gleason1012,
I have checked & found that it is already installed on two computers as you have mentioned.
To use it again, please download the CC on the new computer & try to activate it, when you try to activate, it will give you a prompt to deactivate from previous installs or deactivate both the install from this new activation on the new computer,deactivate it from here. it will deactivate both the computers including the one you have for the works.
Now activate it on this computer, for your previously installed computer, reactivate it by:
1. log out of the CC Desktop App & log back in
2. Launch any product & "license the software" & sign in, it will reactivate.(Follow these steps in the old work computer)
Regards,
Rajshree

Similar Messages

  • How to deactivate one of our computers that has crashed so I can download on another

    How to deactivate one of our computers that has crashed so I can download on another?

    I'm also having the same problem, except my hard drive died. It worked for a little while on my other computer and then told me that I was running it on another computer and had to deactivate it, so I clicked the button to deactivate it. Now it's doing it again but wont let me deactivate it, saying I've reached my limit for deactivations or something like that and to try again later. It's only doing this with Muse, I'm using Photoshop too and haven't run into this problem. I'm in the middle of working on a site and really don't have time to waste with it being stupid like this, so any help would be greatly appreciated!

  • TS4006 How do i reactivate an iPad Mini that has been disabled

    How do i reactivate an iPad Mini that has been deactivated due to password without iTunes

    You have to restore the iPad using one of the methods in here.
    iOS: Forgotten passcode or device disabled after entering ...
    You will need to use Find My iPhone in iCloud.com in order to erase your device and unlock it so that you can use it again. See the very end of the article.
    This is copied from the article.
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

  • FCPX, How do I reconnect a video file that has been modified or over written?

    FCPX, How do I reconnect a video file that has been modified or over written?
    As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
    Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
    Andy Murdock

    If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

  • TS4006 how do i find my ipod touch that has been stolen

    how do i find my ipod touch that has been stolen and it is not hooked up to wifi so i can locate it on the map so i can take a cop and get it back

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police. The plocie will dolittle except if they recover it they can return it to you.
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • How do I unlock my iTunes account that has been disabled?

    How do I unlock my iTunes account that has been disabled?

    If changing your password does not solve, then contact itunes support

  • How to see the table in se11 that has been created in oracle 10g directly

    hi,
    how to see the table in se11 that has been created at SQL> prompt in oracle 10g directly ?
    is there any procedure to attache directly created table  into sap ?

    I think you have to create it in SE11 first. Although you can probably use native SQL to access it from an ABAP program.
    Rob

  • How do i recover a text message that has been deleted

    how do i recover a text message that has been deleted

    Did you back it up first?  If so, are you willing to restore your iPhone back to the last backup?
    If you didn't back it up, it's gone.

  • How to handle a fully depreciated asset that has been brought back to life?

    I have an old fully depreciated asset(from the 1990s) that has been brought back to life and has new cost to add to it.
    The fixed asset master data looks like this:
    Capitalization date: 01.01.1998
    Historic APC: 0
    Acquisition value: X
    NBV: 0
    Ordinary depreciation: X
    Depreciation tab - no planned depreciation(for current fiscal year).
    Now I want to add the new cost Y to it. I add a subsequent acquisition but the planned depreciation (on the Depreciation tab) is not what I expect. I can't figure out how it is getting that amount. Calculation should be Y / Useful life starting 1st day of current period.
    The depreciation type setup is NBV / Rem life, straight line depr, prorata temporis.
    Any ideas?
    Thanks

    Okay, I have just realized how the system is calculating depreciation.
    useful life = 36.
    There are 3 months left in the current fiscal year. Depreciation is calculated as Y / (36 -9) = one month's depreciation.
    Why? Is this correct from accounting point of view? My client expects the calculation to be Y / 36 even though we are in period 10 of the current year.

  • HT204053 How can I remove an apple id that has been disable from I cloud?

    How can I remove apple id that has been disable fro my iCloud ?

    You cannot delete an Apple ID. All you can do is stop using it.

  • HT1420 how can I deathorize a computer that has been destroyed?

    I had iTunes on a work computer that I had to turn in and it was completely wiped.  I only uninstalled iTunes and I did not deauthorize it.  How can I delete it without having the computer any more?

    Individual computers can only be deauthorised directly on them. Otherwise when you reach the 5 computer limit then you can log into your account and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

  • How can i delete a photo album that has been synced from another computer

    I am trying to delete a photo album that I do not need anymore from an iPad 4. But the album has been synced from a computer that I don't have access to anymore. Is there anyway around this ?

    Photos that were synced from a computer can only be deleted by connecting to a computer's iTunes and changing the sync selection on the device's Photos tab.
    Is that the only album that was synced from that computer (and you now sync the iPad to a different computer ?), or do you have other albums from it that you want to keep on the iPad ? If you want to keep one or more albums on it then they will need to be on the computer that you sync to so that they can be selected on the Photos tab and re-copied to the iPad from that computer. If you want to remove all synced photos then try selecting and syncing just an empty folder

  • How can I separate just a message that has been mis-threaded?

    I thread all of my messages as it helps keep them organized. I occasionally run across a message that is mis-threaded. Totally unrelated to the thread it has been included in. How do I separate out just that mis-threaded message and keep everything else threaded properly? TB24.3.0, Win XP

    Are the mis-threaded messages from the same sender? Is it possible they have used "Reply" inappropriately?
    More generally, if messages appear in inappropriate places, I'd try this:
    # Back up your profile (https://support.mozilla.org/en-US/kb/profiles-tb)
    # Select the folder
    # Right-click, select <em>Properties</em>
    # Select <em>Repair folder</em>

  • How do I contact someone regarding outage that has been going on in Vincennes In   for most of the day - when will it be fixed?

    This is the only phone I have - parents need it to contact me  they are elderly -   outage has been most of the day p- when will it be restored?

    have u tried calling 611? sometimes it will still go thought if that doesn't work then go to a Verizon store and if u explain they will call for u or let u use one of theres if your not near a Verizon store then ty to barrow some ones phone that works maybe a friend or co worker the number to Verizon is 800-922-0204 and that is about all u can or if none of those options will work then wate it out
    good luck hope u get a anser

  • How do I secure a web site that has been compromised?

    I have been transferring a shopping cart (zen cart) web site from a different server and hosting company. I am very concerned about security issues because the site has been hacked. Once a web site has been hacked, what kind of things should be doing to make the site secure again?
    Here are some concerns: the owner is getting about 30 to 50 bounce back emails. The From line has the email address of the former hosting company. I suspect the only thing to do is to change the email address.
    At one point, the configure file was changed: the username and password for the database. I changed the username and password but a customer called and said that she ordered a product the other day and it came from a different company from a different state.
    So, obviously the site has been hacked and needs to be secure. The payment method is by credit card through Authorize.net.
    What do I need to do to make sure this site is secure?

    Hi
    This is just one of the problems with open source software, anyone and everyone has access to the code and knows what the folder and file names are that they must change for re-direct of sales/payment and often worse the name of the database connections folder and default connection file name, (they often then only require to 'hack' the password).
    Unfortunately many people keep a simple user name and password for the web site, which is often simple to guess or hack. As an example the ftp connection is in most cases relatively simple to hack, (there are many password hack programs available on the web, free) the user name is often a simple variation of the site name, with a password set to something similar to the site name or owners name, (the owners name is available from Internic or similar service).
    At the very least - download a copy of the database, change the log-in details for the site and database, set up a completely new zen cart site using completely new files, (save any custom designs, css etc. and 'import to new set-up). Do not use any old server side script files unless you are certain they have not been changed, check your database for unauthorized changes, and then upload the 'new' database and files.
    The email bounce back is quite common if the sender name is not one that is from the hosting servers email accounts, and is probably one of the reasons why many people simply 'give-up' trying to get such items to work. The idea behind the restriction is to stop spammers using your email account to send bulk emails via your server.
    There is much more you could do, but this would depend on the size and traffic of the site, (cost effectiveness).
    PZ
    www.pziecina.com

Maybe you are looking for

  • SD_SALESDOCUMENT_CREATE with conditions & error message in CHECK_VBAP

    Hello, I have follow problem. I want to create a sales order via BAPI SD_SALESDOCUMENT_CREATE. I fill the condition table with item numbers. The parameter logic_switch-cond_handl is set to 'X'. The error message behavior (parameter behave_when_error)

  • 2 Company Codes - Same Report --- Issue Very Urgent

    Hello Guys, I have following questions w.r.to BI implementation. We have 40 SAP BI reports developed for our company. Now we have moved to other New implementation for the same company but in other country. ( Germany - Company Code - DE / France - Co

  • Exporting a DV STREAM

    Hello everyone - I was hoping to use Keynote as part of our broadcast system. We broadcast news and I wanted to use it for fast graphics. Our broadcast server only accepts DV STREAM files though. On a look around the internet, it seems I should be ab

  • When ever i try to update my ipod 4g  i get the 3194 error how do i fix and network settings error?

    when ever i try to update my ipod 4g  i get the 3194 error how do i fix and network settings error?when ever i try to update my ipod 4g  i get the 3194 error how do i fix and network settings error?

  • TCAM and Access Lists

    Hi I am getting myself confused with the TCAM tables and access-lists. From reading the switching book I can see that the access-lists are compiled into the TCAM. What is confusing me is how a switch does a lookup in parallel when the access lists ar