How to deactivate s26X tables in Source system

Hi All,
I have an requiremnet
I have to stop updating of s26x table in source system, as data is not extracting to BW (version 3.0)
I have deactivated the Infostructure in LBWQ 2lis_01_26x. By which Delta tables got deactivated .
But still the s26x table is getting updated in source system.
Thansks in advace
Leena

Hi,
Please stop the job control of the extractor.
-Vikram

Similar Messages

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Can FDMEE connect to oracle table as source system?

Can FDMEE connect to oracle table as source system?

Hi Experts ,
I am new to FDMEE .
I am loading data from Oracle RDBMS to Essbase/Planning using Open Interface Adapter , as per the steps mentioned in the Erpi_admin guide , i have populated the AIF_OPEN_INTERFACE table with data and configured FDM stuffs ( Mappings , Import Format , Location , Data Rule etc ) . During IMPORT getting the error "
2014-01-28 17:45:24,018 FATAL [AIF]: Error in CommData.insertImportProcessDetails
Traceback (most recent call last): File "<string>", line 2304, in insertImportProcessDetailsRuntimeError: No periods were identified for loading data into table 'TDATASEG'."
Just to confirm that i have done the Period Mapping as well .
Please guide me to load the data using Open interface adapter .
Thanks,
Amit

How to define the PSA in source system

hi ALL:
when i double click the datasource in the source system's datasource overview , there is an message of "Transfer method 'TRFC with PSA' is not supported by the source system ", and prompt me to define the PSA in source system , but i did not known how to define the PSA in source system .can any one tell me.
thanks a lot!

Hi
This becuase of RFC connection problem
go to rsa1>right click on youe sourcesytem>>check
if the connection is not good,contact your basis
cheers,
Swapna.G

How to recover a datasource from source system

Dear Experts,
i am trying to find a datasource(0PS_PRJTYPE_ATTR) in the source system. For some reason, I could only find the text one, not the attribute one. I checked in RSA5, RSA6 and RSA2. I couldn't find it.
What are the possible ways to recover the datasource, not sure if someone has deleted it.
Its really urgent, Please guide me.
Regards
Shanthi

Hi,
The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
Regards
Venkata Devaraj

Purchasing - Set Up Table in source system - LBWG

Hi all,
Currently we are extracting Purchasing data into BI7, and have a large volume already which has been delta'd across.
We need to apply some notes to the Source System which involve deleting the data out of the set-up table, trnx LBWG.
Can anyone tell me what the impact of this will have on the deltas being run in BI7...and what steps if any I would need to take?
Thanks, Lee

Hi Lee,
Setting up of set up table is one time activity in general scenario.
Once setup table data population is done , load data into BW through initialization option . If this init request gets in to status "Green" , then on you dont need to refer to data in setup table .
As per the wish / space constraint one may keep / delete the setup table data.
Regards
Mr Kapadia

How to create DataSource for BI Source System in RSA1?

I have a BI Source System defined, however I can't figure out a way to create a new DataSource for it. I can create DataSource objects for all my other Source Systems, but I can't figure out how to do this for this BI system.
I select my BI Source System, right-click, choose "Display DataSource tree". When I right-click from the DataSource tree, I expect to get "Create Application Component" and "Create DataSource" options, but instead I only see "Replicate Tree Metadata" and "Replicate DataSources" options.
How can I create DataSource objects for my BI system?

Hi,
I guess you want to create a custom developed source in BI itself. For that you need to create the data source in RSO2 and inside you need to give the specific aplication component under which you want this DS to be in. Generate a data souce and then go to BI My self Source system and then replicate that particular appl component o view your data source.
Hope this helps
Regards,
Srini

How to Create an R/3 source system and load data from there

Hello All,
Till now I have only worked with Flat files. I want to create an R/3 source system and extract data from there on to my Info Providers.
Does anyone has detailed steps for that. I am using BW 3.5 system
Thanks n Regards,
Abhishek

1. Type Transaction WE30. Check iDoc types
2. Type Transaction SM59. Maintain RFC destinations
a.) Open the RFC Destinations. b.) Find your Source System and double click on it. c.) Technical setting should contain information regarding yoursource system d.) Logon Information should contain source system client and name & password for you remote logon. We use RFC_SAB for BW logon to R/3 and RFC_AAE for R/3 logon to BW. Password for both is always xxxxxxx. e.) Execute your 'Test Connection' & 'Remote Logon'. You should NOT be prompted for a password, if you are then the logon info is incorrect. f.) Repeat above to verify RFCs for other systems (CRM etc)
3. Type Transaction WE21. iDoc Processing Ports.
a.) Select 'Ports' and then 'Transactional RFC'. b.) Click on the Port # for you source system. c.) Verify description & SAP R/3 version.(BW 2.1C should be release 4.x) d.) RFC Destination should be one created in SM59. If non-existent then create one
4. Type Transaction SE16. Data browser (for R/3  BW Connections)
5. Type Transaction SM30. Msg Types & Assignment to iDocs
Enter 'EDIMSG' in the Table/View field. Click on the 'Enter Conditions' option for Restrict Data Range. Click 'Maintain'. Select Message Type. Then enter 'RSSEND' in "From' field. Verify that the Basic Type matches what is in your RSBASIDOCtable for each of your connections. If any are missing any entries you must create them as follows: Create another session and type Transaction WE30. Enter IDoc Type (ZSBAXXX) in Obj. Name field (Suggestion: Start new type with 'ZS' + Transfer Structure Prefix + (3)#'s) Select Create. Select "Create from Copy'. Enter 'RSSEND" in 'Copy From' field Enter Description (i.e. IDoc Type for BW Development) Execute (Green Check). Repeat for other missingentries.
6. Go to the SM30 main screen. Clients Overview
Enter 'T000' in the Table/View field. Click 'Maintain'. Verify correct Client and Description. If incorrect enter.
8. On BW Type Transaction WE20. Partner Profiles
9. On R/3 Type Transaction WE20. Partner Profiles
10. Check all is correct

How to copy a table from one system to another system

Hi all,
can any one say how to copy table from one system(sys1) to another system(sys2).
regards,
nagaraj

There are many ways.
1. Use the already existing transaport request number for that table to do the transaport (Active)
2. Create mannual transport request from SE01 and in the object list enter following
R3TR -- TABI -- <Table Name>
And do the transaport.
3. Ask your basis consultant to do the transaport from oracle layer.
Thanks,

How to get BI content on source system

Hi BI Expert,
We have applied NetWeaver 7.0 BI Content Add-on 3 SP09 to get DataSource Transactional Data: 0DF_IS_DFS_66 and DataSource Transactional Data: 0DF_IS_DFS_65. It went well but I can not see the datasources that we require both on BI and source system.
Could you please help us how to get these datasources on BI and finally transfer it to source system? After this, I need to activate and install it to get some reports that business requires.
Thanks for your kind help.

hi,
First of all these data sources are not available in your support pack 9 source system. May be you need to upgrade the suppor packages and see if they available in RSA5 (source system)
0DF_IS_DFS_65--for this check out following link.
http://help.sap.com/saphelp_nw70/helpdata/en/11/e19d36cbbd409faaf852d93ba895ab/frameset.htm
0DF_IS_DFS_66--check the following link
http://help.sap.com/saphelp_nw70/helpdata/en/1e/33909988d4431dad27c6be63b96d33/frameset.htm
hope this help you.
Regards,
Anand Tej.

How Delta Queue fetches data in source system.

Hello Experts,
SMQ1 is physical storage of all transactions created in the source system. Delta Queue(RSA7) fetches data from SMQ1. In case of Queued and Unserilized V3 delta where LBWQ and SM13 come into picture. Can you please clarify my doubt.
Thanks in advance.
Zakir.

solved question

How to repair by mistake deleted source system on R/3 side

Hello,
while trying to delete not needed source systems on BW it happend that the source system on R/3 side for a still existing (and needed) client was deleted. It's the main source system for tests so it's needed in any case.
But the check of this source system on BW side doesn't work anymore. Is there a possibility to repair this problem?
I tried to use this repair option on the menu but within the steps it wants to delete the existing RFC connection from R/3 to BW and I don't want to make it because there's another source system (another client) that uses this RFC - I don't want to destroy another working thing ;/
Is there any other possibility or do we really have to make a return tranport from the productive system to the test system?
Greetings
Bettina

Hello!
We tried it with the repair option in the menu - in general the source system is repaired again. But at the moment we don't know if everything's ok. So we are going to make a return transport from porductive to test system to be sure that nothing is overwritten in the future that shouldn't be overwritten.
Greetings
Bettina

In sm30, when save, how to fill the table with the system data in the table

Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

Hi ,
Do like this.
1. Go to SE11 -> give your table name and press on change button .
2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
3.Assign Functin group if already have one , other wise create function group and assign
4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
5.Click on new entries
->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
ztable-username = sy-uname.
ztable-createtime = sy-uziet.
check and activate the code .
With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
Don't forget award points if it helps you.
Regards,
Raghav

How to prevent Pivot Table Data Source from being changed automatically?

I have an excel file that contains a Pivot Table that references a table within the workbook (Data Source = "MyTable"). When I save the file and copy it, the copy contains a reference to the original file. Instead of displaying, "MyTable",
it shows "OldFilename!MyTable" where OldFilename is the name of the original file, not the current file.
How do I prevent this from occurring. It is only doing this on my current machine, if I perform these steps on a different machine, the problem does not occur and the Data Source property stays the same as it should.
What setting(s) do I change to fix this problem?
Thank you in advance for your help!
Michael

Hi Michael,
How about the issue now, is it solved?For the 'data model' feature,please refer to:
http://blogs.office.com/2012/08/23/introduction-to-the-data-model-and-relationships-in-excel-2013/
let us know if you have any additional questions or concerns.
Best regards,
Wind

How to deactivate s26X tables in Source system

Similar Messages

Maybe you are looking for