How to deactivate the flex builder licence from one machine and use it on other machine

Hi,
I have a "Flex builder 3" licence running on my machine.
I have to deactivate that and use it on another machine.
How should I do that? As there is no otpion in flex builder.
Any help appreciated.
Thanks,
Tushar

What happens when you just install Flex Builder on the other machine and enter the serial number? I was not aware of Flex Builder having a mechanism that tracks activations like the Creative Suite products.
If this post answers your question or helps, please mark it as such.
Greg Lafrance
www.ChikaraDev.com
Flex Development and Support Services

Similar Messages

How to transfer the whole address book from one no...

Dear friend,
Could you please advise me "how to transfer the whole address book from one nokia to another nokia phone via blue tooth connectivity. (move one by one is not convenience for my hundreds of contact.
Thank and waiting for advice...
victor

If your phones have the built-in "Transfer" (sometimes called "Switch") application, try it.
Otherwise, depending on the model(s) you can also copy all contacts to/from the memory card, and get them over that way.
And you can also synchronize both programs to the same service (e.g., Outlook on a Windows PC using Nokia PC Suite).
And newer versions of Nokia PC Suite can also be used to make a backup of one phone, and then restore to another.
PC Suite you can find here: http://www.nokia.com/pcsuite

How to Maintain the MM Master Data from one company code to other co code

Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KK

Hi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand

How to migrate the concurrent managers definations from one instance to another

How to migrate the concurrent managers definitions from one instance to another instance by using FNDLOAD in R12.1.3
Greatly appreciate any help on this.
Thanks!

Concurrent managers can't be migrated using FNDLOAD -- Tips and Examples Using FNDLOAD (Doc ID 735338.1)
What are you trying to achieve here? Why migrating CMs from one node to another?
Thanks,
Hussein

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

How can I delete an Apple ID from one device and replace it with a different ID on that same device?

Tthe brute force method: start with Settings > iCloud and turn off Find My (you will need the password), then change the iCloud ID, then go to the apps such as Messages, FaceTime, etc, and delete the Apple ID and enter the new one.

Can I copy the "Stage Area" and use it on other machine; R12; OEL 6;

Hello All,
I am trying to install R12 (with Vision demo database) on my Linux machine.
I have copied the stage area from another machine, and I want to use it on this machine.
I am trying to run the rapidwiz from the copied stage directory.
It initiates, but is now ending up with a RW-5004 error.
I have tried to install R12 several times now, but no success so far.
I dont know the specifications for the last machine, but the staging has been done on a Linux platform.
The present machine is
RAM : 8 GB
HDD : 400 GB
OS : OEL 6 (64 bit)
all the necessary packages are installed.
Please Help !
Thanking you all.
Edited by: Udit apps dba on Apr 25, 2012 3:48 PM

Hello Hussein Sir,
I have read all your previous posts indication this error to be generic in nature.
Well, I have read the error logs of different nodes, but without having much success in it.
At last, after too much of trying I deleted my VM machine and now I am installing the machine again, with fingers crossed.
My biggest question is "Can I copy the "Stage Area" of another machine of same configuration and use it on other machine" ?
At last, I would request you sir to please forward me your personal email address (the one you use often).
I shall be highly obliged.
Regards,
Udit Kulshrestha

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

How to check the report builder version from the rdf file

Hi,
I have a rdf file but I don't the developer using which version of report builder to develop the rdf file. So, does anyone knows how to check the rdf file is developed by which version of report builder?
When I try to use the notepad to open the rdf file, it shows the string "ROS.60050". So, does it means that the rdf file is developed by Oracle report 6i?
Besides, do anyone knows if Oracle report 6i are still offer from Oralce (as I know, the latest verison of oracle report is 11g). So, in case Oralce not offer oracle 6i and I need to buy oracle report 11g, do u know it is compatiable or I need to do the migration from 6i to 11g?
Thanks!

Hi,
The ROS version you are seeing in the RDF file does not mean the version where that RDF was developed. I am not aware of a way to check this but something that may help is that when you try to open a RDF developed in a higher version
of Reports with a lower version of Reports builder the following warning will be displayed
Warning. Opening a report saved with a newer version of Reports Builder.
Functionality may be lost. Continue?
"You tried to open a report with a version of Reports Builder older than the version used to
create the report. If the report uses functionality unavailable in the older version, that
functionality will be eliminated from the report.
Regarding Oracle Developer 6i. This version is not supported any more. Regarding how to upgrade Reports 6i to 11g and what to have in mind during the upgrade please review the following documentation.
References
http://docs.oracle.com/cd/E24269_01/doc.11120/e24478/toc.htm
How To Migrate Forms and Reports From 6i and/or 9i To 11g? (Doc ID 1275515.1)
Hope it helps.
Regards, RZ

How to deactivate the load objects runnnig from CRM to CDM in TCode:R3AM1?

Hello Friends,
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CDM". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.
Cheers
Sreedhar

Hello Soumya,
Thanks for the info.
My question is how to delete or remove or deactivate the destination as CDB(Mobile sales) in the R3AM1 T Code.Most of the standard Load objects are running in the background (as Background Job) and source site as "CRM" and Destination as "CDB" . Since we are not using Mobile sales , unnecessarily these load objects are running regularly and showing green "Done" status . How to find which job is running all these objects so that i can stop rnning this job?
Let me know for any additional info.
Cheers
Sreedhar
We are using CRM 4.0 , at the time of implementation they had done settings for Mobile sales also.But since implementation we are not using Mobile sales, using only CRM sales.
My concern is , in TCode : R3AM1 (Monitor Objects) , many of the objects are in status "Done" with source site " CRM " and Destination as "CD". And these load objects are running on regular basis .I want to exclude or delete these load objects to run with destination as "CDM" and want only Source site as "OLTP" and destination as "CRM" and vice versa.
Also how can i find which background job is using what load objects?
Would appreciate for your valuable suggessions to achieve this.

How to keep the filter when jump from one report to another report?

Hi experts,
How to use the "Link" or "Button Group" Web Item in BEx Web Application Designer to jump from one report A to another report B, both the filter of report A and report B could be kept and not missing.
When I use jump from report A to report B, the filter of Report B disappears.
But I need the filter of Report B to stay there and could be used.
Thanks
Alex

Hi..
I tried Your approached but I got an error as the field are connected to Entity Object and they are mandatory.
I achieved it using another way. Using " setForwardURL " method only.
As I am calling this method to delegate back to first page. This method takes 8 input parameters.
The 6 no parameter is about to retain AM or not. It a boolean type. Initially it was TRUE as soon as I changed it to False it worked as I needed. :)
Thanks and Regards,
Ajay

How to limit the max dialog no that one user can use at the same time?

Hi,
I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
Thanks a lot!
I used this parameters in the default profile as blew:
rdisp/rfc_check 1
rdisp/rfc_use_quotas 1
rdisp/rfc_max_own_used_wp 20 (means: 20%)
It still didn't work.
Sean

Hello,
We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
that have to necessarily remain free for other users.
This parameter is used to reserve a number of dialog work processes for Dailog mode.
For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
But now the question is how we assign/restrict this free dialog w.p. to the specific user.
Reply...
Regards,
JUNAID

How do I cut out an image from one photo and paste it in another photo?

Help! I did use the scissors and eraser tool to cutout unwanted background, and now I have an image I want to save and copy to another photo. The problem is that Elements 11 won't let me open up another photo at the same time, or let me copy the selected image to clipboard to paste on a different photo. Adobe's info. on how to do this seems to be sketchy.

Try this:
Open photo B, the one that you want to add an object to. Minimize this.
Open Photo A, and using one of the selection tools, e.g. selection brush, lasso tool, make a selection of the object that is to be transferred to B. You will see "marching ants" when the selection is complete.
Go to Edit menu>copy to place the selection on the clipboard
Go back to photoB
Go to Edit>paste
With the move tool, position the object and resize with the corner handles of the bounding box.

How to solve the flash Builder 4.6 scroll view and textinput display problem?

I have a dynamic form application which worked well on flash builder 4.5, having display problems in flash builder 4.6 now. What I did is adding
TextInput objects to a scroll view and set the texts for them dynamically. Everything is fine after the screen loaded. But if I scroll down, sometimes the texts will be placed in wrong positions. I attached the screen copy of the wrong display. Does anybody know how to solve this problem? Thanks.

Check out the two threads below (if you have not already). I have not tried it but aeonus describes an approach that made me think of something that might work ... It is a workaround but, what if you have a text field (txtA) with the skin that does not allow soft keyboard selection, but does scroll correctly, and on the onClick event of that text field, you dynamically cover it with another text field (txtB) that does allow soft keyboard selection, (but does not scroll properly) and trigger the keyboard. After you get the entry from the user, set the value of txtA and destroy txtB ... leaving you (theoretically) with properly scrolling text fields. If you have a lot of those in your app, you might want to write a component that implements that behavior.
"Create a dynamic textfield, and on click, invoke create a StageText instance at the same location as the textfield (by setting the StageText.viewPort property)
Finally, set StageText.softKeyboardType to "numeric" and call StageText.assignFocus();"
http://forums.adobe.com/thread/915019?tstart=0
http://forums.adobe.com/thread/911214?tstart=0

How to track the URL that comes from a referred page using XSQL Custom Handler

Hi,
I have a cold fusion page(say cf.cfm) that sent a request to xsql page(say test.xsql) and then xsql page displays results. I want to capure the URL of cf.cfm page and then after checking its host name and path name for correctness then want to display the test.xsql results.
Please let me know how can I capture URL of the refered page(cf.cfm) in the Custom Handler and then I want to extract host-name and path-name out of that url and on the basis of their values I want to display the result of XSQL page(test.xsql).
Regards
a2012

req.getHeader("Referer") will return the referring url

How to pass the check box values from one view to another view

Hi Experts,
I have a selection screen view which consists of check boxes.
WBS System status.
Release                      Completed                  Closed as 3 check boxes.
Note : The above ones are check boxes.
Based on the selection made by the user, those values needs to be passed to second view which retrieves the data and
displays the data accordingly.
At the same time if the user does not make any selection, then WBS System status should contain Released, Completed and Closed values and that needs to be sent to Second view.
Kindly advise.
Regards,
Chitrasen

hi ,
make a attribute of type WDY_BOOLEAN to achieve this functionality
u need to follow these steps :
1 in side ur component controller , under the ATTRIBUTES tab , make 3 attributes say attr1 , attr2 and attr3 of type WDY_BOOLEAN
2 create a context node , cn_check and 3 context attribute ca_check1 , ca_check2 and ca_check3 in ur first view for
release , complete and close check boxes
3 inside the DOINIT of ur 1st view , set the attributes attr1 , attr2 and attr3 to blank
wd_comp_controller->attr1 = ' '
wd_comp_controller->attr2 = ' '
wd_comp_controller->attr3 = ' '
4 inside the method , where u r validating , if the check boxes are checked or not , read the attributes ca_check1 , ca_check2 and
ca_check3
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check1 LIKE ls_cn_check-ca_check1.
*   navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
*   get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
*   get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check1 ).
IF lv_ca_check1 EQ 'X' .
wd_comp_controller->attr1 = ' X'
wd_comp_controller->attr2 = 'X '
wd_comp_controller->attr3 = ' X'

How to deactivate the flex builder licence from one machine and use it on other machine

Similar Messages

Maybe you are looking for