How to deactivate the project lock functionality

I am trying configuration from solution manager to development syatem.
After performing the nessary configuration and saving it in a change request it give a message
"Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality"
I have tried everything with RFC connection but problem is still there .
The only option is to deactivate the project lock functionality.
Can anyone help me with it?

I deactivated all the option in tx: /tmwflow/config_lock
but still it gives this message after i save the changes in change request in development system.
I want to deactivate the project lock functionality
ERROR 1
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
ERROR 2
The settings in Change Request Management do not correspond to the settings in Solution Manager: The projects of the Change and Transport System (CTS projects) for the Solution Manager project XYZ_DEV_MT are different.

Similar Messages

  • Urgent - How to deactivate the popup reminder window

    I want to know how to deactivate the reminder popup window when you restart a Captivate movie.
    I have an application made with Flash that load in wrapper some captivate movie. When i load a movie that i 've just loaded before, a popup reminder window with "do you want to continue from last slide..?"  appears. How can I deactivate this popup? Or Is it possible to change the language text of this window?
    Thank you very much for your help

    I believe that is controlled by the 'self paced learning' option in the table of contents settings.
    in windows, Project > Table of Contents > Settings (under the list of the TOC)

  • How to delete the project  version RELEASED.

    System is below:
    " Project 1522DJ110001 version RELEASED already exists
    Message no. CJ016
    Diagnosis
    A Version RELEASED already exists for project 1522DJ110001.
    System Response
    Processing stopped. "
        but in the system , there are no  "Project 1522DJ110001". so the user can't create the project "1522DJ110001".
        how to delete the Project 1522DJ110001 version RELEASED ?
    Please explain me all the steps to be required.
    Thanks in advance!

    Hi Harish,
    When I select Delete Project Version from Extras menu in CN41, its asking session number and version.
    In session number no serch help is avialble. I am keeping it blank and seleting RELEASED in version.
    After pressing enter I am getting an error Project Version RELEASED cannot be deleted??
    Let me the exact steps to deleted the Project Version.
    Thanks and Regards,
    Atul R. Rajmane

  • How to deactivate the marketting attributes for BP in CRM

    Hi,
    how to deactivate the marketting attributes for BP in CRM
    I can add and maintain the same using tcode crmd_prof_char
    But how do I deactivate.
    Points will be rewarded
    Thanks

    .

  • How to write the exceptions in function module

    dear all,
         how to write the exceptions in function modules with example.
    thanq
    jyothi

    Hi,
    Raising Exceptions
    There are two ABAP statements for raising exceptions. They can only be used in function modules:
    RAISE except.
    und
    MESSAGE.....RAISING except.
    The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
    If the calling program does not handle the exception
    · The RAISEstatement terminates the program and switches to debugging mode.
    · The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
    If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
    Source Code of READ_SPFLI_INTO_TABLE
    The entire source code of READ_SPFLI_INTO_TABLE looks like this:
    FUNCTION read_spfli_into_table.
    ""Local Interface:
    *" IMPORTING
    *" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
    *" EXPORTING
    *" VALUE(ITAB) TYPE SPFLI_TAB
    *" EXCEPTIONS
    *" NOT_FOUND
    SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
    IF sy-subrc NE 0.
    MESSAGE e007(at) RAISING not_found.
    ENDIF.
    ENDFUNCTION.
    The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
    Calling READ_SPFLI_INTO_TABLE
    The following program calls the function module READ_SPFLI_INTO_TABLE:
    REPORT demo_mod_tech_fb_read_spfli.
    PARAMETERS carrier TYPE s_carr_id.
    DATA: jtab TYPE spfli_tab,
    wa LIKE LINE OF jtab.
    CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
    EXPORTING
    id = carrier
    IMPORTING
    itab = jtab
    EXCEPTIONS
    not_found = 1
    OTHERS = 2.
    CASE sy-subrc.
    WHEN 1.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
    WHEN 2.
    MESSAGE e702(at).
    ENDCASE.
    LOOP AT jtab INTO wa.
    WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
    ENDLOOP.
    The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
    Or
    just have to decide what exceptions u want and under what conditions.
    then declarethese exeptions under the exceptions tab.
    in the source code of ur function module.
    if
    like this u can code .
    now when u call the function module in tme mainprogram.
    if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
    in the fm u can program these sy-subrc values and trigger the code for ur exception.
    Please reward if useful
    Regards,
    Ravi
    Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

  • How to implement the shared lock in a  table view

    Hi,
    How to implement the shared lock in a  table view.for multiple users to edit on this same table.
    Thanks in advance
    Swathi

    Hi,
    Please refer this link to find solution to your querry.
    Hope it helps.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c322c690-0201-0010-fb86-811c52b0acc2.
    Regards,
    Rahul

  • How to create the change document functionality for a dependent objects?

    May I please know how to create the change document functionality for a dependent objects?
    I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
    If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
    thanks in advance.

    I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
    Thx.

  • How to open the Data Perspective function of Smart View in EAS?

    How to open the Data Perspective function of Smart View in EAS?
    I use my Smart View to connect one ASO cube, and I found the button of Data Perspective is grey. It's not available.
    In Smart View Users' Guide, it says:
    Note: Data perspective may not be enabled in your Smart View system. Your options for data perspective are enabled and configured by the administrator in Oracle Essbase Administration Services.
    But I could not find how to configure the this option in EAS.
    Does anyone know about this?

    I have already turned on the varying attributes function, but the data perspective button is still grey, not available.

  • How to find the Project and wbs Element System Status

    Hi all,
      How to find the Project and wbs Element System Status.
      We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
    Regards
    Raghavendra

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • How to get the project path ?

    In my servlet, how do I get the project path ?
    I have the following dir structure :
    Web_App
      + build
        lib
      + nbproject
      + src
        test
      + web ( index.jsp , my.jsp , my.html )
        + Dir_Docs ( my file : ABC.txt ) My Servlet is :
    public class My_Servlet extends HttpServlet
      public void init(ServletConfig config) throws ServletException
        super.init(config);
      public void destroy() { }
      protected void processRequest(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException
        response.setContentType("text/html");
        PrintWriter out=response.getWriter();
        out.println(System.getProperty("user.dir"));   
    }What I got was : C:/apache-tomcat-6.0.14/bin/
    How to get the project path ? Which is : C:/Web_App/ ?

    Yes, config.getServletContext().getRealPath("index.jsp"); got the job done !
    Thanks.

  • How to achieve the project is obligatory entry when creating transport requ

    Hello
    How to achieve the project is obligatory entry when creating transport request

    In T-code SE03, under Administration -> Display/Change Request Attributes
    Select "SAP_CTS_PROJECT" and hit the change button and then change the value of "Default for All Clients" to Mandatory
    Hope this helps.
    Thanks,
    Naveed

  • How to deactivate the Touch vibration in Nokia Lum...

    How to deactivate the Touch vibration or keytouch vibration in Nokia Lumia 620  ?

    THIS is applicable in your case too ..

  • Please tell me exactly how to remove the AVG search function

    Please tell me exactly how to remove the AVG search function
    ''edited by a moderator for clarity''

    You don't need to repeat yourself dozens of time or use profanity to get help here.
    (1) Disable ALL nonessential or unrecognized extensions on this tab. Not sure what it does? If in doubt, disable:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Use of the links above a disabled extension to restart Firefox if any appear.
    (2) Reset your search providers to Google:
    https://addons.mozilla.org/en-US/firefox/addon/searchreset/
    (3) Check for a user.js file (do this before exiting Firefox, otherwise the settings in that file can undo your cleanup) as described in this article: [[How to fix preferences that won't save]].
    (4) If AVG search took over your new tab page (Ctrl+t), change that as follows:
    (A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (B) In the filter box, type or paste '''newtab''' and pause while the list is filtered
    (C) Double-click the '''browser.newtab.url''' preference and enter the desired value for your preferred page:
    ''(i) Page thumbnails (default)'' => about:newtab
    ''(ii) Blank tab'' => about:blank
    ''(iii) Built-in Firefox home page'' => about:home
    ''(iv) Any other page'' => full URL to the page
    IMPORTANT: If you have AVG software in your Windows Control Panel, you may also need to remove it there.

  • The auto lock function is not working on the iphone 3gs running ios 6...what should i do?

    the auto lock function is not working on the iphone 3gs running ios 6...what should i do?

    Temporary fix - turn off assistive touch if you happen to have it on.

Maybe you are looking for