How to deactivate the Touch vibration in Nokia Lum...

How to deactivate the Touch vibration or keytouch vibration in Nokia Lumia 620  ?

THIS is applicable in your case too ..

Similar Messages

  • How to deactivate the touch click??

    Hi guys,
    I'm having problem getting use to the new magic mouse and I would like to deactivate the touch click. Every time I touch the mause it opens somethings or close etc.... I looked under settings, but I didn't found the option to deactivate. I want to be able just to click.
    Any help please!

    Hello lopez:
    What do you mean by
    touch click.
    There is no +"touch click."+ Either you are actually pressing on the mouse or it is faulty.
    Barry

  • How to deactivate the marketting attributes for BP in CRM

    Hi,
    how to deactivate the marketting attributes for BP in CRM
    I can add and maintain the same using tcode crmd_prof_char
    But how do I deactivate.
    Points will be rewarded
    Thanks

    .

  • Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

    Hello,
    this topic is still a problem for me, does anybody have an idea.
    Just to show what's my problem:
    Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
    The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
    That works, the SH's are not shown anymore.
    I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
    All this can be done modification free by appends.
    The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
    This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
    But I have not found any way to do this modification free.
    The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
    But I want avoid this modification.
    So, is there any way to do this without modifing any of the original SAP SH's ?
    Helmut Fischer

  • Urgent - How to deactivate the popup reminder window

    I want to know how to deactivate the reminder popup window when you restart a Captivate movie.
    I have an application made with Flash that load in wrapper some captivate movie. When i load a movie that i 've just loaded before, a popup reminder window with "do you want to continue from last slide..?"  appears. How can I deactivate this popup? Or Is it possible to change the language text of this window?
    Thank you very much for your help

    I believe that is controlled by the 'self paced learning' option in the table of contents settings.
    in windows, Project > Table of Contents > Settings (under the list of the TOC)

  • How to install the touch button on the iphone screen ?

    Q:How to install the touch button on the iphone screen?

    Settings/General/Accessibility, turn on Assistive touch.

  • How to deactivate the "left top corner SAP menu" for a particular screen

    Hello Friends..
    We have a requirement to implement a "Non Disclosure Agreement(NDA)" for one of our SAP systems. NDA screen will have 2 buttons, "I agree" and "I disagree" which pops up when you log in to the system(after filling up our user id and password and hit enter). If we click on "I agree", it will allow you to continue with the log in and takes you to sap easy access screen. If we click on "I disagree", then session will be terminated.
    But, the NDA window which is being popped up is also a SAP screen which has SAP menu on top left corner. Without clicking on "I agree" or "I disagree" and if we try to select "Create session" option in SAP menu on top left corner, then it is taking us inside SAP(sap easy access screen) by bypassing the buttons.
    Request your help on how to deactivate the "left top corner SAP menu" for this particular NDA screen. (SAP menu to be available with other screens and it should not be available just for the window which is being popped up after log in and before SAP easy access)
    Many Thanks in advance..
    Vinay

    Hi Vinay,
    Try this if it works -
    in your first screen for the NDA screen, on the memnu bar select - EXTRAS - SETTINGS - Select the check box 'Do not display menu, only display favourites'.
    on calling the next screen , disable this option in the PBO of the screen.
    Try and let me know if it works.
    Thanks & Regards, Swapnil Mishra

  • How to deactivate the W-4 Link in the

    hello all,
    how to deactivate the W-4 Link in the EP 6.0?

    An analogy I often use..
    SMTP and PL/SQL UTL_SMTP is like a truck. It takes a payload from point A to point B. And that's it. It does not know what the payload is. It does not care what the payload is.
    You must construct the payload in your code. It is your responsibility to ensure that it is correct, legal, kosher, halaal and whatever else. SMTP does not care. Does not know.
    So what should the payload be? It must be a valid Internet Message Body. These message bodies can contain anything from plain text, HTML, to images, video and even applications.
    Obviously you need to make the URL part of the message body (not UTL_SMTP). How? That is up to you to decide. Are you sending an HTML Internet Message Body as the payload to be delivered by SMTP? If so, then use the HTML anchor tag.
    Internet Message Bodies are explained in RFC's 2045 to 2049. You will find an RFC repository at http://www.faqs.org/rfcs/rfc-titles.html

  • How to deactivate the marketting attributes

    Hi,
    how to deactivate the marketting attributes for BP
    I can add and maintain the same using tcode crmd_prof_char
    But how do I deactivate.
    Points will be rewarded
    Thanks

    Hi,
    I think you didnt understand my problem.
    While creating BP, we have created some 5 mktg attributes.
    Among them I want to deactivate or hide 1 attribute.
    So that in future no one can select that attribute again.
    from main attribute screen i got option for delete.
    When I select that attribute and press delete. It says you can not delete, because it has been already valued or used.
    So I want to hide that it.
    Pls suggest,
    Thanks

  • My computer was stolen! How to deactivate the old installation?

    Hey, I need to use my serial number o install the CS6 on the new computer (Mac), because the old one was stolen. How to deactivate the old installation.

    Hello!Thank you for your answer, but still I can not connect with anyone who can help me. Chat is not working, I tried for the past three days. I bought this program together with educational kurs and now I need it to do my study. Could you help me please to activate Adobe Creative Suite 6 on my new computer?With best wishes,Tania.
         Jeff A Wright <[email protected]> schrieb am 20:26 Dienstag, 16.Dezember 2014:
    |
    My computer was stolen! How to deactivate the old installation?
    Jeff A Wright marked hans-g.'s reply on My computer was stolen! How to deactivate the old installation? as helpful. View the full replyMarked as helpful:Hello Tania, please have a look there: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html >>> Deactivation or sign-out problems >>>I cannot access my previous computer >>> I quote: "... Ask Adobe Support to help you deactivate from a machine you cannot access. .... Have your serial number or Adobe ID ready, and then contact us." See Contact Customer Care  >>> click through and if "open" please use the chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help. Hans-Günter
    Following My computer was stolen! How to deactivate the old installation? in these streams: Inbox
    |

  • How to deactivate the Transfer rules

    Hi
    While i was activating the cube by using the options " In data flow before" all the tranfer rules and the update rules have been activated,,,,,,,,,,,,,,,,now i want to create the transformations on that cube for that I just want to know how to Deactivate the transfer rules and the Update Rules..............so that in future if i require them i can use them later..........

    hi preethi,
    carry on with your transformation.
    unless u create infopackage for 3.x infosource u will not encounter update & transfer rules.
    KEEP IN memory once u use a data source r/3-bw(u activate it in rsa5 in r/3 side& use it intransfer rules datasource definition).
    u will not be able to assign the same datasource another time.
    this is not the case with flat file loads were u assigh it as pcfile or my file .
    reward points if helpful

  • How to deactivate the phone?

    I want to give my iPhone to a relative. I would like to leave it relatively untouched, and just deactivate the phone so she can activate it for herself. How can I do this?
    If it can't be done with just the phone part, how can I reset the phone to original and keep it with the 1.1.4 software?

    Just pull your SIM card out. She just need to get a new SIM card to open a new account for herself. You can do a restore if you want to wipe it clean.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • How to deactivate the fields in a table control of a standard screen

    Hi,
       I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
    With Regards,
    Ajit.

    >
    Vivek Joshi wrote:
    > Hello Router ,
    >                      I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
    > I hope , I am clear now .
    > Thanks for your help
    > Regards
    > Vivek
    An yet you keep getting suggestions of how to set the focus.   I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is.  Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point.  I can pass the requirement onto Product Definition, as the use case does seem interesting.  Perhaps it is something we have even considered in the past. 
    But for now, there might be a better way to solve your problem.  It will probably mean redesign the interaction.  What exactly are your requirements?  Do you need to be able to get the data in a particular cell of table when a button is clicked?  Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work.  Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table.

  • How to deactivate the rosetta option if it is not shown in information page

    Hi,
    by accident or why ever I clicked the option "start with rosetta" on my eyetv.app. STRANGE now the option is no longer viewable in information field and I can't start the application inside of the application folder because I get then the message "EyeTV can't run under Rosetta-Emulation" please deactivate the Option via Menu Ablage and unmark the option. BUT I can't see this option in information field. AND if i try to start the eyetv.app in an folder outside of applications it works.
    Anyone an idea

    Hi,
    thank you for the hint with command+i BUT THIS DOES NOT help of course, because I already wrote that I used this.
    I solved it now in different way which leads to a general question that somewhere the osx seems to note versions of programs and how to open them.
    Description of this issue now in detail:
    - I installed EyeTV in Version 3.0 on OSX 10.6 and started it.
    - a message appears that this program is not made for this OSX version (it was made for 10.5)
    - stupidly Elgato has no direct access to update from 3.0 to 3.1.2 which works with 10.6 WHICH means EyeTV has a buildin update BUT is useless if you can't start this app
    - OK this leads me to idea to enable the "Start with Rosetta option"
    - Didn't work
    - I took then an 3.1.2 Version from my TimeMachine Backup and copied it over the old ones
    - tried to start it and the message appear "This cannot run in Rosetta Mode"
    - HERE IT COMES the little option field where you can disable or enable Rosetta in the information of the eyetv 3.1.2 is not shown so I was unable to disable it of course
    - so i copied the file to a different directory and it works there normally
    - ..... AFTER 2 hours i remembered that I had set the "Start with Rosetta" option on version 3.0 and the Snow Leopard seems to have noted this somewhere and i need a trick to see this option and the only way is to use a version 3.0 file maybe the option will appear there again
    - ok copied Version 3.0 over the 3.1.2
    - AND AH the rosetta option appears and was enabled and I had here the possibility to disable or unmark it
    - then copy back the 3.1.2 Eyetv version file and AH it runs
    So imagine that someone else uses today an application which really needs rosetta, and a user activates this and after some month a Snow Leopard 64bit version comes and nobody tells the user to deactivate the rosetta version on old package before installing new one.... poor user, I guess the 64bit version will tell the crap "This application can't run under rosetta" and the user will never find the way to disable it.
    Hope there is a better way to find out for which application in which version was set the "start with rosetta" option in the system.
    IF ANYONE KNOWS PLEASE let me know

  • How to deactivate the standard toolbar 'print' button

    Dear Expert,
    I want to deactivate the standard toolbar print's button in the smartform print preview screen.
    Could you explain and give me some sample code ?  Thanks !

    For details of how to restore it, see the [[menu bar is missing]] article.

Maybe you are looking for

  • Blue screen appears & Information about Archive & Install option.

    Hey, i am using Mac 10.5.8 Yesterday it was working perfectly fine. But after dinner when i tried to open, it dont go beyond blue screen I have tried disk utility using original MAC OS X DVD, while verifying it says disk appears to be ok, but its say

  • My ipod is recognised in my computer but not in the itunes source list

    Please Help. I got my ipod (20gb) as a Christmas present last year. It is now 11 months old. I havent had many problems with it but recently one has arisen. I connected my ipod to my windows computer. It displayed 'Do not disconnect'. After waiting f

  • Error when importing IDOC structure from SAP - Control record missing

    Hi! We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type

  • Multiple Entries for a field in Table

    Hi All, I needed to add field to a ztable, the options should include  values from table LIKP-LFART and should allow for multiple entries. I tried adding field with table type and structure type but error saying table type or sturcture cannot be used

  • Aq  process pls help   queue_payload_type= 'AQ.String_msgType',

    Hello friends My aq process(Enqueuing) works fine when i was creating a queueu table with queue_payload_type='SYS.XML_TYPE. SELECT xmltype.getrootelement(user_data) as Root FROM QUEUE TABLE This gives me good output I created queue table with differe