How to deal with a partial migration

I now find myself in this situation:
new OES Linux 11 Server with Tree and data copied (with gw agents of)fline)
from Netware Server
I've arranged the files the way I want them
Problem I have ...
Consoleone on linux returns -748 - I'm not sure what this is Timout error
Since the NW box is no longer available
I can connect from a PC ok but can't access GW database as its on a Linux
server!
How do I edit GW paths
I will also need to edit the Lib storage areas pointed to the Netware server
(split across 2 volumes)

Ok I managed to login to Consoleone on the Server with IP instead of Tree!
What I've done so far:
Installed consoleone on OES (now can login with IP instead of Tree)
GW on NSS Volume SYSGW - gwsys/gwdom, gwsys/gwpo
storage area is gwsys/lib1, gwsys/lib2 etc
I have selected domain and changed path to /media/nss/SYSGW/gwdom &
/media/nss/SYSGW/gwpo
*** Not sure about this syntax / path to lib ***
edited the library storage areas /media/nss/SYSGW/lib1 /
/media/nss/SYSGW/lib2
I've deleted WebAccess and GWIA objects (and Spell check etc)
Made sure domain and po are set to Linux (databases still show as 7 - I
assume this is normal - because the NW system was on GW 7)
question is have I done everything to load GW agents now?
"DZanre" <[email protected]> wrote in message
news:[email protected]..
> "bas" wrote:
>
>> I can connect from a PC ok but can't access GW database as its on a Linux
>> server!
>
> Well, you should figure this out - why can't you access? Are these NCP
> volumes?
> If not you could create a samba share to access from a PC.
>
> You have to get into ConsoleOne SOMEWHERE before we can go much further.
>
> --
> Danita
> Novell Knowledge Partner
> write like a pro - http://www.writingwithdanita.com/

Similar Messages

How to deal with security when migrating application from weblogic 5.1 to weblogic 6.1?

Dear All,
I have one statement int weblogic 5.1 weblogic.propertis as follow,
weblogic.security.realmClass=com.tbcn.security.realm.TestRealm
but after converting to weblogic 6.1 there are no corresponding statement in
the file config.xml. And when i start the new application, error occured.
what should I do?
The error message is:
<2001/8/27 am 11:33:42> <Notice> <Management> <Loading configuration file
.\config\tbcn\config.xml
<2001/8/27 am 11:33:49> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initializatio
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised: java.lang.NullPointerException
java.lang.NullPointerException
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:261)
at
weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:385)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception

Dear Satya,
My weblogic propertis file as follow,
# CORE PROPERTIES
# You should set these before you start the WebLogic Server the first time.
# If you need more instructions on individual properties in this
# section, check the same section in the Optional Properties, where
# we've left the long explanations. Or, better yet, go to our
# website and read all about properties, at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# CORE SYSTEM PROPERTIES
# TCP/IP port number at which the WebLogic Server listens for connections
weblogic.system.listenPort=7001
# CORE SECURITY-RELATED PROPERTIES
# Read important information about security at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# REQUIRED: The system password MUST be set in order to start the
# WebLogic Server. This password is case-sensitive, at least 8 characters.
# The username for the privileged user is ALWAYS "system".
# This username and password also includes httpd access (see
# HTTPD properties below).
weblogic.password.system=12345678
# RECOMMEND Set to 'everyone' if HTTPD is enabled
weblogic.allow.execute.weblogic.servlet=everyone
# Set individual ACLs to restrict access to HTTP-related resources,
# such as the Administration servlets.
# To make your own servlets generally available, follow this
# pattern (provide a weblogic.allow.execute) for your packages and
# set ACLs as appropriate.
# CORE SECURITY-RELATED PROPERTIES FOR SSL
# Read important information about SSL at:
# http://www.weblogic.com/docs51/classdocs/API_secure.html
# Enable SSL
# (default if property not defined is false)
weblogic.security.ssl.enable=true
# SSL listen port
weblogic.system.SSLListenPort=7002
# Servlets for SSL
# Authentication servlet for creating tokens for applets
weblogic.httpd.register.authenticated=weblogic.t3.srvr.ClientAuthenticationS
ervlet
# Limits number of unclaimed stored tokens
weblogic.security.certificateCacheSize=3
# Capture CA root of client servlet
weblogic.httpd.register.AdminCaptureRootCA=admin.AdminCaptureRootCA
# Certificates for SSL
# Name of acceptable CA roots
# For client authentication change value to a valid .pem file
#weblogic.security.clientRootCA=SecureServerCA.pem
# Server certificates for SSL
weblogic.security.certificate.server=democert.pem
weblogic.security.key.server=demokey.pem
weblogic.security.certificate.authority=ca.pem
# registration for certificate generator servlet
weblogic.httpd.register.Certificate=utils.certificate
weblogic.allow.execute.weblogic.servlet.Certificate=system
# CORE HTTPD ADMINISTRATIVE PROPERTIES
# True permits the HTTPD to run (default)
# Uncomment this property to disable HTTPD
#weblogic.httpd.enable=false
# If authentication is required, add username/password for each user
# who will be included in an ACL, as in this commented-out example:
#weblogic.password.peter=#8gjsL4*
# SYSTEM PROPERTIES
# System properties in this section are set to system defaults
# Performance pack. The shared library must be accessible from your
# PATH (NT) or from your shared library path (UNIX; the name of the
# variable varies: LD_LIBRARY_PATH, SHLIB_PATH, etc.)
weblogic.system.nativeIO.enable=true
# Outputs logging information to the console as well as to the log file
weblogic.system.enableConsole=true
# Sets the directory or URL for the WebLogic Admin help pages
# The help pages are shipped in the "docs/adminhelp" directory, in the
# default document root in public_html
weblogic.system.helpPageURL=/weblogic/myserver/public_html/docs51/adminhelp/
# If you prefer to access the most recent help pages, you can do so online
# by commenting out the previous property and uncommenting this one:
#weblogic.system.helpPageURL=http://www.weblogic.com/docs51/adminhelp/
# Properties for tuning the server's performance
# Number of WebLogic Server execute threads.
weblogic.system.executeThreadCount=15
# Other optional system properties
# Limits size of weblogic.log (in K) and versions old log
weblogic.system.maxLogFileSize=1024
# Adjust minimum length of password
weblogic.system.minPasswordLen=8
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
# CLUSTER-SPECIFIC PROPERTIES
# Cluster-specific properties in this section are set to system defaults.
# CLUSTER USERS: Note that ALL Cluster-specific properties should be set
# in the per-cluster properties file ONLY.
# Time-to-live (number of hops) for the cluster's multicast messages
# (default 1, range 1-255).
#weblogic.cluster.multicastTTL=1
# Sets the load-balancing algorithm to be used between
# replicated services if none is specified. If not specified,
# round-robin is used.
#weblogic.cluster.defaultLoadAlgorithm=round-robin
# SERVER-SPECIFIC CLUSTER PROPERTIES
# Cluster-related properties in this section are set to system defaults.
# CLUSTER USERS: Note that these server-specific cluster-related properties
# should be set in the per-server properties file ONLY.
# Sets the weight of the individual server for the weight-based
load-balancing.
# Range is 0 - 100.
# Larger numbers increase the amount of traffic routed to this server.
#weblogic.system.weight=100
# SYSTEM STARTUP FILES - Examples
# CLUSTER USERS: Note that ONLY startup registrations for pinned RMI
# objects should be registered in the per-server properties file.
# All other startup classes should be registered in the per-cluster
# properties file.
# For more info on writing and using startup file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a startup class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.startupClass.[virtual_name]=[full_pathname]
# Add arguments for the startup class
#weblogic.system.startupArgs.[virtual_name]={argname]=[argvalue]
# This example shows the entry for examples/t3client/StartupQuery.java
#weblogic.system.startupClass.doquery=examples.t3client.StartupQuery
#weblogic.system.startupArgs.doquery=\
# query=select * from emp,\
# db=jdbc:weblogic:pool:demoPool
# SYSTEM SHUTDOWN FILES - Examples
# For more info on writing and using shutdown file, see the
# Developers Guide "Writing a WebLogic Client application," at
# http://www.weblogic.com/docs51/classdocs/API_t3.html
# Register a shutdown class by giving it a virtual name and
# supplying its full pathname.
#weblogic.system.shutdownClass.[virtual_name]=[full_pathname]
# Add arguments for the shutdown class
#weblogic.system.shutdownArgs.[virtualName]={argname]=[argvalue]
# This example shows the entry for examples/t3client/ShutdownTest.java
#weblogic.system.shutdownClass.ShutdownTest=examples.t3client.ShutdownTest
#weblogic.system.shutdownArgs.ShutdownTest=\
# outfile=c:/temp/shutdown.log
# SECURITY-RELATED PROPERTIES FOR WORKSPACES
# For backward compatibility, the following entries disable Access
# Control on Workspaces
weblogic.allow.read.weblogic.workspace=everyone
weblogic.allow.write.weblogic.workspace=everyone
# JOLT FOR WEBLOGIC PROPERTIES
# These properties configure a BEA Jolt connection pool for use with
# the simpapp and bankapp examples, and register a servlet for use with
# with the simpapp example. The default server address provided here
# points to a public TUXEDO server that is hosted by BEA for use with
# this example.
# Servlet registration for simpapp example:
#weblogic.httpd.register.simpapp=examples.jolt.servlet.simpapp.SimpAppServle
t
# Pool creation and cleanup
# note this example is set up to work with the public
# demo TUXEDO server available from BEA's website:
#weblogic.system.startupClass.demojoltpoolStart=\
# bea.jolt.pool.servlet.weblogic.PoolManagerStartUp
#weblogic.system.startupArgs.demojoltpoolStart=\
# poolname=demojoltpool,\
# appaddrlist=//beademo1.beasys.com:8000,\
# failoverlist=//beademo1.beasys.com:8000,\
# minpoolsize=1,\
# maxpoolsize=3
#weblogic.system.shutdownClass.demojoltpoolStop=\
# bea.jolt.pool.servlet.weblogic.PoolManagerShutDown
#weblogic.system.shutdownArgs.demojoltpoolStop=\
# poolname=demojoltpool
# WEBLOGIC ENTERPRISE CONNECTIVITY PROPERTIES
# The registrations enable a BEA IIOP connection pool and
# register servlets for use with the simpapp and university examples.
# Configure for your environment and uncomment to use.
# Uncommenting these properties requires WebLogic Enterprise Connectivity
# and an operating WebLogic Enterprise Server.
# Servlet registration for simpapp servlet example
#weblogic.httpd.register.SimpappServlet=\
# examples.wlec.servlets.simpapp.SimpappServlet
#weblogic.allow.execute.weblogic.servlet.SimpappServlet=everyone
# Servlet registration for simpapp EJB example
# (You'll need to add the wlec_ejb_simpapp.jar to the
# weblogic.ejb.deploy property in this file.)
#weblogic.httpd.register.ejbSimpappServlet=\
# examples.wlec.ejb.simpapp.ejbSimpappServlet
#weblogic.allow.execute.weblogic.servlet.ejbSimpappServlet=everyone
# Pool creation and cleanup for the simpapp example
#weblogic.CORBA.connectionPool.simplepool=\
# appaddrlist=//wlehost:2468,\
# failoverlist=//wlehost:2468,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# domainname=simpapp
# Servlet registration for university Servlet example:
#weblogic.httpd.register.UniversityServlet=\
# examples.wlec.servlets.university.UniversityServlet
#weblogic.allow.execute.weblogic.servlet.UniversityServlet=everyone
# Pool creation and cleanup for the University example:
#weblogic.CORBA.connectionPool.Univpool=\
# appaddrlist=//wlehost:2498,\
# failoverlist=//wlehost:2498,\
# minpoolsize=2,\
# maxpoolsize=3,\
# username=wleuser,\
# userrole=developer,\
# apppassword=wlepassword,\
# domainname=university
# WEBLOGIC FILE PROPERTIES
# Maps a volume name to a path, for client file read/write
#weblogic.io.fileSystem.[volumeName]=[fullPathName]
# WEBLOGIC JMS DEMO PROPERTIES
# CLUSTER USERS: Note that ALL JMS deployment should be done in the
# per-cluster properties file ONLY.
# You set up a JDBC connection pool if you want persistent messages
# (including durable subscriptions). To use JMS and EJBs in the same
# transaction, both must use the same JDBC connection pool. Uncomment
# the following property to use the default JDBC connection pool
# 'demo', which is defined in the Demo connection pool section of this file.
#weblogic.jms.connectionPool=demoPool
# The JMS Webshare example demonstrates how the ClientID for a
# durable subscriber is configured in the connection factory:
#weblogic.jms.topic.webshareTopic=jms.topic.webshareTopic
#weblogic.jms.connectionFactoryName.webshare=jms.connection.webshareFactory
#weblogic.jms.connectionFactoryArgs.webshare=ClientID=webshareUser
#weblogic.httpd.register.webshare=examples.jms.webshare.WebshareServlet
# The JMS trader example shows how to use JMS with an EJB. In addition
# to uncommenting the following properties, you must also set up and
# deploy the EJB example examples.ejb.basic.statelessSession.Trader in
# ejb_basic_statelessSession.jar to try out this JMS example:
#weblogic.jms.topic.exampleTopic=javax.jms.exampleTopic
#weblogic.jms.connectionFactoryName.trader=jms.connection.traderFactory
#weblogic.jms.connectionFactoryArgs.trader=ClientID=traderReceive
#weblogic.httpd.register.jmstrader=examples.jms.trader.TraderServlet
# Registers the underlying servlet
#weblogic.httpd.register.jmssender=examples.jms.sender.SenderServlet
# These properties are used with the ServerReceive JMS example,
# which demonstrates how to establish a JMS message consumer
# in a startup class:
#weblogic.system.startupClass.serverReceive=\
# examples.jms.startup.ServerReceive
#weblogic.system.startupArgs.serverReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
# These properties are used with the PoolReceive JMS example,
# which demonstrates how to establish a pool of JMS message consumers
# in a startup class:
#weblogic.system.startupClass.poolReceive=\
# examples.jms.startup.PoolReceive
#weblogic.system.startupArgs.poolReceive=\
# connectionFactory=javax.jms.TopicConnectionFactory,\
# topic=javax.jms.exampleTopic
#weblogic.allow.create.weblogic.jms.ServerSessionPool=everyone
# WEBLOGIC RMI DEMO PROPERTIES
# CLUSTER USERS: Note that pinned RMI objects should be registered
# in the per-server properties file ONLY. All other RMI startup
# classes should be registered in the per-cluster properties file.
# Remote classes registered at startup after the pattern:
#weblogic.system.startupClass.[virtualName]=[fullPackageName]
# These examples can be compiled to see RMI in action. Uncomment to use:
#weblogic.system.startupClass.hello=examples.rmi.hello.HelloImpl
#weblogic.system.startupClass.multihello=examples.rmi.multihello.HelloImpl
#weblogic.system.startupClass.stock=examples.rmi.stock.StockServer
# WEBLOGIC EJB DEMO PROPERTIES
# CLUSTER USERS: Note that ALL EJB deployment should be done in the
# per-cluster properties file ONLY.
# See WebLogic Demo Connection Pool below for a connection pool
# to use with these examples.
# Deploys EJBeans. Uncomment the appropriate lines below and
# modify DBMS-related info and paths to match your particular installation:
# TBCN EJB PROPERTIES
weblogic.ejb.deploy=\
C:/weblogic/myserver/AccountSB.jar, \
C:/weblogic/myserver/AddressEntryDet.jar, \
C:/weblogic/myserver/AddressEntry.jar, \
C:/weblogic/myserver/Affiliate.jar, \
C:/weblogic/myserver/ContactPerson.jar, \
C:/weblogic/myserver/ContactSB.jar, \
C:/weblogic/myserver/Factory.jar, \
C:/weblogic/myserver/FactorySups.jar, \
c:/weblogic/myserver/LoginUsers.jar, \
c:/weblogic/myserver/Member.jar, \
c:/weblogic/myserver/MemberQuotaUsage.jar,\
c:/weblogic/myserver/MemberToCategory.jar,\
c:/weblogic/myserver/Organization.jar, \
c:/weblogic/myserver/Person.jar, \
c:/weblogic/myserver/QuotaType.jar,\
c:/weblogic/myserver/Registration.jar, \
c:/weblogic/myserver/TempAccounts.jar, \
c:/weblogic/myserver/TempDomain.jar, \
c:/weblogic/myserver/UserAccount.jar, \
c:/weblogic/myserver/UserRole.jar, \
c:/weblogic/myserver/BuyerProducts.jar, \
c:/weblogic/myserver/Catalog.jar, \
c:/weblogic/myserver/Categories.jar, \
c:/weblogic/myserver/CategoryToCategory.jar, \
c:/weblogic/myserver/CountryToCategory.jar, \
c:/weblogic/myserver/InvitedMember.jar, \
c:/weblogic/myserver/ProductOrigin.jar, \
c:/weblogic/myserver/ProductOtherFee.jar,\
c:/weblogic/myserver/ProductSups.jar, \
c:/weblogic/myserver/Products.jar,\
c:/weblogic/myserver/ProductToCategory.jar, \
c:/weblogic/myserver/SecondaryQcEntry.jar, \
c:/weblogic/myserver/CodeClass.jar,\
c:/weblogic/myserver/ConfirmationSB.jar, \
c:/weblogic/myserver/PurchasedPackage.jar,\
c:/weblogic/myserver/RejectReasonCode.jar, \
c:/weblogic/myserver/ServiceOrder.jar,\
c:/weblogic/myserver/ServiceOrderLog.jar,\
c:/weblogic/myserver/ServiceOrderState.jar,\
c:/weblogic/myserver/ServiceOrderType.jar,\
c:/weblogic/myserver/ServicePackageDetails.jar, \
c:/weblogic/myserver/ServicePackage.jar, \
c:/weblogic/myserver/ServicePayment.jar, \
c:/weblogic/myserver/ServiceReqSB.jar, \
c:/weblogic/myserver/TAM.jar, \
c:/weblogic/myserver/SubscriptionEB.jar, \
c:/weblogic/myserver/PostingCategoryEB.jar, \
c:/weblogic/myserver/PostingBrowsedEB.jar, \
c:/weblogic/myserver/PostingInfoEB.jar, \
c:/weblogic/myserver/TransactionLogEB.jar, \
c:/weblogic/myserver/PostingSB.jar
#weblogic.ejb.deploy=\
# d:/weblogic/myserver/ejb_basic_beanManaged.jar, \
# d:/weblogic/myserver/ejb_basic_containerManaged.jar, \
# d:/weblogic/myserver/ejb_basic_statefulSession.jar, \
# d:/weblogic/myserver/ejb_basic_statelessSession.jar, \
# d:/weblogic/myserver/ejb_extensions_finderEnumeration.jar, \
# d:/weblogic/myserver/ejb_extensions_readMostly.jar, \
# d:/weblogic/myserver/ejb_subclass.jar, \
# d:/weblogic/myserver/jolt_ejb_bankapp.jar
# Servlet used by the EJB basic beanManaged example
# Uncomment to use:
weblogic.httpd.register.beanManaged=\
examples.ejb.basic.beanManaged.Servlet
# Add a list of users (set the password with
weblogic.password.[username]=XXX)
# to set an ACL for this servlet:
#weblogic.allow.execute.weblogic.servlet.beanManaged=user1,user2,etc
#weblogic.password.user1=user1Password
#weblogic.password.user2=user2Password
# WEBLOGIC XML DEMO PROPERTIES
# These properties are required to run the XML examples.
# Uncomment to use.
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
#weblogic.httpd.register.StockServlet=examples.xml.http.StockServlet
# BizTalk example properties
#weblogic.jms.queue.tradeIncoming=biztalk.jms.tradeIncoming
#weblogic.jms.queue.tradeError=biztalk.jms.tradeError
#weblogic.httpd.register.BizTalkServer=examples.xml.biztalk.BizHttpProtocolA
dapter
#weblogic.httpd.initArgs.BizTalkServer=bizQueue=biztalk.jms.tradeIncoming
# WEBLOGIC ZAC DEMO PROPERTIES
# These registrations enable the ZAC Publish Wizard.
weblogic.zac.enable=true
# Set the publish root for a WebLogic Server. Edit and
# uncomment to use.
#weblogic.zac.publishRoot=d:/weblogic/zac
# Set an ACL for each package you publish. The [name] is
# the "Package name" you assign in the ZAC Publish Wizard.
# Publish a package, edit this property, and uncomment to use.
#weblogic.allow.read.weblogic.zac.[name]=[user list]
#weblogic.allow.write.weblogic.zac.[name]=system
# HTTPD ADMINISTRATIVE PROPERTIES
# Enables logging of HTTPD info in common log format and
# sets the log file name (default is "access.log" in "myserver")
weblogic.httpd.enableLogFile=true
weblogic.httpd.logFileName=access.log
# Tracks HTTPD requests with events delivered to WEBLOGIC.LOG.HTTPD
weblogic.httpd.enableEvents=false
# Enables HTTP sessions
weblogic.httpd.session.enable=true
# Sets an optional cookie name. The default name is "WebLogicSession".
# Prior to version 4.0, the default was "TengahSession". To make
# this backward compatible with cookies generated from previous
# installations, you should set this property to "TengahSession".
# Uncomment this line and set this to any string of your choice,
# or comment out this property to use the default.
#weblogic.httpd.session.cookie.name=WebLogicSession
# MIME types
weblogic.httpd.mimeType.text/html=html,htm
weblogic.httpd.mimeType.image/gif=gif
weblogic.httpd.mimeType.image/jpeg=jpeg,jpg
weblogic.httpd.mimeType.application/pdf=pdf
weblogic.httpd.mimeType.application/zip=zip
weblogic.httpd.mimeType.application/x-java-vm=class
weblogic.httpd.mimeType.application/x-java-archive=jar
weblogic.httpd.mimeType.application/x-java-serialized-object=ser
weblogic.httpd.mimeType.application/octet-stream=exe
weblogic.httpd.mimeType.text/vnd.wap.wml=wml
weblogic.httpd.mimeType.text/vnd.wap.wmlscript=wmls
weblogic.httpd.mimeType.application/vnd.wap.wmlc=wmlc
weblogic.httpd.mimeType.application/vnd.wap.wmlscriptc=wmlsc
weblogic.httpd.mimeType.image/vnd.wap.wbmp=wbmp
# In seconds, the keep-alive for HTTP and HTTPS requests
weblogic.httpd.http.keepAliveSecs=60
weblogic.httpd.https.keepAliveSecs=120
# WEBLOGIC JDBC DRIVER PROPERTIES
# Enables JDBC driver logging and sets the file name for the log
# The weblogic.jdbc.logFile is placed in the per-server
# directory (default is "myserver")
weblogic.jdbc.enableLogFile=false
weblogic.jdbc.logFileName=jdbc.log
# WEBLOGIC JDBC CONNECTION POOL MANAGEMENT
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# For creating JDBC connection pools. This example shows a connection
# pool called "oraclePool" that allows 3 T3Users "guest," "joe," and "jill"
# to use 4 JDBC connections (with a potential for up to 10 connections,
# incremented by two at a time, with a delay of 1 second between each
# attempt to connect to the database), to an Oracle database server called
# "DEMO." If more than 4 connections are opened, after 15 minutes, unused
# connections are dropped from the pool until only 4 connections remain
open.
# Every 10 minutes, any unused connections in the pool are tested and
# refreshed if they are not viable.
#weblogic.jdbc.connectionPool.oraclePool=\
# url=jdbc:weblogic:oracle,\
# driver=weblogic.jdbc.oci.Driver,\
# loginDelaySecs=1,\
# initialCapacity=4,\
# maxCapacity=10,\
# capacityIncrement=2,\
# allowShrinking=true,\
# shrinkPeriodMins=15,\
# refreshMinutes=10,\
# testTable=dual,\
# props=user=SCOTT;password=tiger;server=DEMO
# Get more details on each argument for this property in the
# Administrators Guide on setting properties at:
# http://www.weblogic.com/docs51/admindocs/properties.html
# Set up ACLs for this connection pool with the following:
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
# guest,joe,jill
#weblogic.allow.reset.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
#weblogic.allow.shrink.weblogic.jdbc.connectionPool.oraclePool=\
# joe,jill
# This property is an ACL that specifies the users who can
# create dynamic connection pools:
#weblogic.jdbc.connectionPoolcreate.admin=joe,jill
# Read more about setting up and using connection pools in the
# developers guide for WebLogic JDBC at:
# http://www.weblogic.com/docs51/classdocs/API_jdbct3.html#T5a
# TBCN JDBC CONNECTION POOL MANAGEMENT
weblogic.jdbc.connectionPool.oraclePool=\
url=jdbc:oracle:thin:@202.109.102.151:1521:tbcn,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=2,\
maxCapacity=10,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=10,\
testTable=dual,\
props=user=tbcn;password=ca91768
weblogic.allow.reserve.weblogic.jdbc.connectionPool.oraclePool=everyone
weblogic.jdbc.TXDataSource.oracleDataSource=oraclePool
weblogic.jdbc.DataSource.oracleReadOnlyDataSource=oraclePool
# WEBLOGIC DEMO CONNECTION POOL PROPERTIES
# CLUSTER USERS: Note that ALL JDBC connection pools should be set up
# in the per-cluster properties file ONLY.
# This connection pool uses the sample Cloudscape database shipped
# with WebLogic. Used by the EJBean, JHTML, JSP and JMS examples.
# Uncomment to use:
#weblogic.jdbc.connectionPool.demoPool=\
# url=jdbc:cloudscape:demo,\
# driver=COM.cloudscape.core.JDBCDriver,\
# initialCapacity=1,\
# maxCapacity=2,\
# capacityIncrement=1,\
# props=user=none;password=none;server=none
# Add a TXDataSource for the connection pool:
#weblogic.jdbc.TXDataSource.weblogic.jdbc.jts.demoPool=demoPool
# Add an ACL for the connection pool:
#weblogic.allow.reserve.weblogic.jdbc.connectionPool.demoPool=everyone
# WEBLOGIC HTTP SERVLET PROPERTIES
# CLUSTER USERS: Note that ALL servlets should be set up
# in the per-cluster properties file ONLY.
# WebLogic offers different types of servlets for various uses.
# Classpath servlet registration
# The ClasspathServlet is used to serve classes from
# the system CLASSPATH. It is used by applets to load
# classes they depend upon, and is registered against
# the virtual name 'classes' here by default. This means
# you should set your applet codebase to "/classes".
# You can register multiple virtual names for this servlet.
# Note that it can also be used to serve other
# resources/files from the system CLASSPATH.
# Don't confuse the ClasspathServlet with the ServletServlet. The
# ClasspathServlet is used for serving classes for client-side Java only.
# The ServletServlet is used to invoke unregistered servlets.
# See the Administrators Guide "Setting up WebLogic as an HTTP server"
# http://www.weblogic.com/docs51/admindocs/http.html#classfile for more
info.
weblogic.httpd.register.classes=weblogic.servlet.ClasspathServlet
# We also set an open ACL for everyone to call the ClasspathServlet
# so that applets work without requiring further changes.
weblogic.allow.execute.weblogic.servlet.classes=everyone
# File servlet registration
# FileServlet searches below the documentRoot for the requested file
# and serves it if found. If the requested file is a directory,
# FileServlet will append the defaultFilename to the requested path
# and serve that file if found.
weblogic.httpd.register.file=weblogic.servlet.FileServlet
weblogic.httpd.initArgs.file=defaultFilename=index.html
weblogic.httpd.indexFiles=zh_TW/index.htm
# ServerSideInclude servlet registration
# SSIServlet searches below the documentRoot for the
# requested .shtml file and serves it if found.
weblogic.httpd.register.*.shtml=weblogic.servlet.ServerSideIncludeServlet
# Example URL: http://localhost:7001/portside/welcome.shtml
# for the file /weblogic/myserver/public_html/portside/welcome.shtml
# PageCompileServlet (used by JHTML)
# See the information below under WebLogic JHTML
# JSPServlet (used by JSP)
# See the information below under WebLogic JSP
# ServletServlet registration
# Allows unregistered servlets in the servlet classpath (see Servlet
# reload properties below) to be r

How system deals with co commitments

Situation is:
PO:
1 line purchase order, account assignment category A (asset) with 5 AU (order unit) and with 5 WBS elements each on 1 AU.
1 AU=37.480,00u20AC
Invoice:
Partial invoices comming to first PO line and first WBS element (first partial invoice, not full amount)
1. invoice 19.900,00u20AC to first WBS element 0,63 AU
2. invoice 5.000,00u20AC to first WBS element 0,15 AU
3. invoice 12.580,00u20AC to first WBS element 0,52 AU
summary 37.480,00u20AC to first WBS element 1,3 AU
And the question is how system deals with co commintments when the accountant assign bad quantity to first line of PO and the first WBS element. Accountant exceeded quantity in invoice:
invoice = 1,3 AU and in purchase order is 1 AU
in this situation how co commitments are calculated ???
thanks for help
M.

1. The system property java.library.path and likewise, the classpath one, are really only there (as far as I know) to show what was in the environment when the JVM started. Updating the properties doesn't actually change the environment. Just like you can probably change "os.name" from Windows to Linux, but that doesn't mean the system changes to run Linux.
2. mapLibraryName just translates the library file name to the system dependent library name, and has nothing to do with the actual environment.

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

How to deal with payment of vendor to us (credit notes I guess)

Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
How to deal with this kind ot transactions? What transaction can I use the best for payments like this
(we got paid an amount , no invoices yet, but I know the vendor).

whith F-02 it is possible I noticed.

How to deal with file(for example .xml)? what format of dir should be?

I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?

Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with the barcode?

i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?

yes, look for a cheaper component...
Or write your own...
Or save up until you can afford the more expensive ones...

How to deal with the growing table?

Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?

junez wrote:
Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?Uh, well, yes if you continually add rows to a table the table will grow ... sooner or later you will want to delete rows that are no longer needed. What did you expect? You have to decide what the business rules are to determine when a row can be deleted, and make sure your design allows for such rows to be identified. This is called ..... analysis and design.

How to deal with the rejected stock if it is rjected by QC

Dear All,
please let me know how to deal with the rejected stock from Quality point of view.i.e., for incoming materails and Finished if returned from customer
Regards,
P.Vijaya

hi
if material is rejected for incoming material then you can create Notification for incoming material due to you can return back material with print for that you have to record defects in result recording. in T-code QM02 if result is recorded with defects. or you can create with Qm01.against vendor
if material is returned from costumer you can create inspection lot for that for that you have to maintained inspection type 06 in material master. you can result record for that you can create notification for that. or rework for this material as per quality check or can scrap
if have any problem please come back
regards
Pravin

Pages 5.5 output PDF is not have pages number interlinkage ,why?How to deal with?

pages 5.5 output PDF is not have pages number interlinkage ，why？How to deal with？

pages 5.5 output PDF is not have pages number interlinkage ，why？How to deal with？

How to deal with a partial migration

Similar Messages

Maybe you are looking for