How to deal with Fixed Assests in Process Enabled Orgs?
How to deal with Fixed Assests in Process Enabled Orgs
We have a Process Organization - Food Industry , We are implimenting the Process Manufacturing . But we also have plenty of machines etc i.e. Fixed assets.
Can any one suggest how to deal with this Process Org, So that i dont need to create another Discrete Org only for Fixed Assets.
Also note that EAM is also in scope in the next Phase, Any suggestion is highly appreciated.
Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic
Similar Messages
-
How to deal with Wire Transfer in BRS?
Hi,
we are facing a problem with wire transfer in BRS.
For cheque issues and receipts we have selected Algorithm 15 and in assignment field we gave cheque number for this no problem.
for wire transfer we dont get any number how to deal with it, please suggest us.
regards & thanks,
sashi kanth.Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic -
How to deal with IBM ServeRaid 7x?
I was trying to install Solaris 10 on our customer's IBM xSeries 346 with ServeRaid 7x onboard, but Solaris does not detect the controller, so I can't finish my job.
Anyone knows how to deal with this problem?
ThanksHi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic -
How to deal with OpenCL grey out issue.
First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string: NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string: 3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html -
How to deal with file(for example .xml)? what format of dir should be?
I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal -
How to deal with special character in source file
Hi experts,
i am doing a file to file scenario in which my source file contains many special characters when i am puting this file into moni its going with the special character .My source file is a fixed length file so in content conversion i have specified the file length but due to these special charcters these field lenght is also varing.So please guide me how to deal with these special characters in sender adapter
regards,
Saurabhyou could try using a Java Mapping to change the encoding manually. For that, set the encoding of the OutputFormat of the XML you'll serialize. Try the following code piece for the mapping (inside a try/catch declaration):
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = factory.newDocumentBuilder();
Document input = documentBuilder.parse(in);
OutputFormat format = new OutputFormat(XML, "ISO-8859-1", false);
XMLSerializer serializer = new XMLSerializer(out, format);
For more details check this guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42 -
How to deal with 0...n or 1...n mappings?
Hi all,
I'm relatively new to BPM. I've already made several processes that are working fine. However, I'm now stuck because, for the life of me, I'm not able to understand how to deal with data mappings of nodes of a cardinality greater than 1...1.
I'm used to dealing with 0...n inputs of Web Services in Webdynpro Java and CAF Application services, using java code... but I just don't get how to deal with these in a BPM data mapping scenario.
Let's say you have a Web Service whose input is a node called "Employee", where you can add n Employee objects, like this:
Employee (0...n)
FirstName: String
LastName: String
How do you:
1- map a 0...n context node from a Web Dynpro or Web Service output, already containing several employees, into this Employee 0...n WS input node?
2- map a 0...n context node from a Web Dynpro or Web Service output, containing NO employees, into this Employee 0...n WS input node, without getting an error and the BPM crashing because it says the employee element is not found?
Hopefully someone can help me with this, because I'm about to go the way of calling the web service n times, one employee at a time, instead of one time with a Employee object with n registries in it.
Thanks!Hi Abhijeet,
i think i should have mentioned this earlier. My Employee node is inside another node. So, the actual input structure of the WS is this:
InputValues (1...1)
Employees (0..n)
FirstName: String
LastName: String
This scenario works OK in BPM when mapping a 0..n node using deep copy as Jocelyn explained, but I still doesn't work if I want to pass an empty (not null) Employees array.
If I go to the WS Navigator and run this WS with the following parameters, it runs ok (I get an output message saying no employee was selected, which is how it should work):
InputValues - "Is null" checkbox not activated.
Employees - "Skip" checkbox not activated
FirstName - "Skip" checkbox activated
LastName - "Skip" checkbox activated
However, if instead of activating the checkbox of, say, "FirstName", I enter a "" value, I get an error from the WS saying that's not a vaild first name, which is also how it should work.
In java code, I would just pass an empty InputValues object to the WS, but I'm not sure how to do this in a BPM without it being considered null, and without having to set on of its String-child values to "".
Do you know how to achieve this? -
How to deal with generated programs in eCATT SAPGUI recording?
Hi experts and professionals,
I am trying to automate testing of our solutions by eCATTs and so far i have not been able to find solution for following problem.
Whole test scenario is very simple:
Check InfoProvider data (query, lookup, listcube,...)
Create DAP on InfoProvider
Archive InfoProvider
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 4. (must match)
Reload archived data
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 7. (must match)
As you can see, one of the required test steps is to check InfoProvider's data in transaction LISTCUBE.
But transaction LISTCUBE generates its program "name" every time it is executed and
I am struggling to find a way how to deal with these generated programs in eCATT SAPGUI recording.
Key is that solution must be generic and work for all SAP BW releases from 7.0 upwards
(having in mind that LISTCUBE can read NLS data from SAP BW 7.3 release).
Error description from eCATT log:
Screen Check Error: Expected Transaction: LISTCUBE, Actual Transaction: LISTCUBE.
Expected Program: GP0KOZE7EFIUBN10MZUFWX90W80, Actual Program: GPBP24INA6VV77SL0XKU5NA642O.
Expected Screen Number: 1000, Actual Screen Number: 1000.
There Is Probably an Error in SAPGUI recording.
ExceptionClass:CX_ECATT_APL_CAPTURE ExceptionId:SCREEN_CHECK_ERROR
RaisingClass:CL_APL_ECATT_LINE_INTERPRETER Include:CL_APL_ECATT_LINE_INTERPRETER=CM00J Line:443
Is there any way how to avoid program check in eCATT script?
Anything that would help me to find solution will be greatly appreciated.
Best Regards,
IgorDear Igor,
Your issue is caused by the "screen check" which eCATT processes here.
In General this screen check is a very usefull activity, since is ensures that only those screens are processed by automation, which initially where recorded. This should ensure as much as possible to invoke only intended activities.
Remember, that the driver of the screen flow is still the automated transaction program ( but not the test tool). So application logic decides which screen is send next.
Using screen check the test tool tries to ensure that menu items and buttons and other activities are only automated when the tool "believes" to work on the intended screen.
For generic test scripts and often in context of generated programs the screen check might hurt a bit.
To overcome this, one might try to make the check dynamic (as Sheetal suggests correctly).
If here the name of program cannot be determined for any reason, one can use another method and do following:
- Change the value of ProcessedScreen-Active to 'R'
This will disable/skip the screen-check for this ProcessedScreen.
Sure the solution includes a certain risk, since not checking the correct screen to appear might lead to automation of actions with not desired impact.
Maybe this can improve your solution.
Kind Regards
Jens -
How to deal with conflict and potential conflict classes?
Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors. -
Move of mailbox with over 30K of folders fails, how to deal with this.
Hello all,
I'm in the process of moving all Exchange 2010 mailboxes to newly created databases located on new storage.
Every mailbox except one moved successfully, the "problem" mailbox keeps failing and I need some advise on how to deal with this.
The mailbox that keeps failing is only 4 GB but has over 30K of folders that the users created manually over the years.
They are unable to easelly delete folders as they have created many sub folders within the folders.
I posted a part of the failed move request log below.
Can anyone advise on how to solve this?
Thanks in advance.
21-2-2015 18:15:13 [EXHUB1] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=7574]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=360][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropWriteStream [45]
Lid: 27962 ROP: ropSetProps [10]
Lid: 27962 ROP: ropSaveChangesMessage [12]
Lid: 17082 ROP Error: 0x4DA
Lid: 18273
Lid: 21921 StoreEc: 0x4DA
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropSaveChangesMessage [12]
Lid: 27420 dwParam: 0xE1F000B
Lid: 36537 dwParam: 0xE1F000B
Lid: 5587 StoreEc: 0x8004010F PropTag: 0xE1F000B
Lid: 33375 StoreEc: 0x8004010F
Lid: 27420 dwParam: 0x806684B0
Lid: 36537 dwParam: 0x806684B0
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x806684B0
Lid: 64931 StoreEc: 0x8004010F
Lid: 46509
Lid: 40193 StoreEc: 0x8004010F
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 64319 dwParam: 0x5000
Lid: 39743 dwParam: 0x6730
Lid: 45016 StoreEc: 0x4DA
Lid: 57304
Lid: 5041 StoreEc: 0x4DA
Lid: 4465 StoreEc: 0x4DA
Lid: 6926 StoreEc: 0x4DA
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 21457
Lid: 19665 StoreEc: 0x4DA
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.SortMessages(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (a4966c13-778a-4d70-9087-f077e2523f66)
Key: FEF1D04E070AB74A99B809B7797674AE000000000000000000000000000000009B5540B45B37774CAB84806C1964B598
SyncStateLength: 27050362
21-2-2015 18:15:13 [EXHUB1] Relinquishing job.Hi,
Based on the description, please run the following commands to check if there are any message limit size. Try to increase the limit size then move this mailbox.
Get-mailbox –identity “user name” | fl MaxSendSize,MaxReceiveSize
Get-transportconfig | fl MaxSendSize,MaxReceiveSize
Get-transportrule | fl MessageSizeOver
Get-sendconnector | fl MaxMessageSize
Get-receiveconnector | fl MaxMessageSize
Note: Once we increased the value we need to wait for the AD replication and cache to be cleared and then test the move mailbox.
If this doesn’t work, please try to move mailbox with the skip corrupted items. This will skip the corrupted items and move only the good items to the target mailbox.
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/5383a826-4383-4b26-a503-2c3bb635f9d2/mailbox-move-to-exchange-2010-fails-for-mailboxes-over-23-gb?forum=exchangesvrdeploylegacy
Best Regards. -
How to deal with Types with xmlbeans
I generated the classes with WSDL scheme,but I find there has only a few methods in TType class.You know there have many elements in Type,so I don't know how to do with Type with the TType classes.
Thank you in advance
Java Free Chart
Java TutorialHi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic -
How to deal with images when detecting/resizing screen?
Hi there,
I am trying to learn how to detect screen resolution and
resize a flash movie to those dimensions. The one thing I'm
wondering first is, how to deal with images in the movie.
Do I need a variety of different movie sizes that I serve up
depending on the resolution, or is there some way of linking to
higher rez image that can be scaled down to fit the screen?
Thanks!as far as I know this has always been a bit of an issue when
using
images inside a scaled movie. If you display a high res image
inside a
scaled down movie, flash can't "reoptimize" it so the image
looks
jagged. Of course the other way around is even worse..
Serving images based on the screen res could be possible if
you detect
it using javascript but could be a night mare to maintain and
test it...
I guess the questions I would ask myselkf are:
1. what is my audience? What resolution the majority of them
will have?
2. Is there anyway I can keep the image size fixed, and scale
to fit he
rest of the design?
3. How much time do I have to implement the customized
version?
It really depends on your project..but to answer to your
quuestion yes
you can detect.
http://www.pageresource.com/jscript/jscreen.htm
and your flash will have to interpret and load images from
different
directories based on the var passed -
How to deal with sales in Re_FX
Hi Experts
we have Sales of Villa, apartments and commercel space, how to deal with there scenarios as there is no sales concept in RE-FX. and any how to intigarate with PS for monitaring construction etc.
any developements if you experts would have done or any suggestions.
thanks in andance.
Warm Regards
RyanHi Ryan,
We can;t use RE-FX for sales scenarios, only workaround's are there.
Create one contract-type for sales and add condition type in conditions as per the payment plan agreed with the customer. It will work for only pre-defined payment plan.
If you want PS integration with milestone billing, it is not possible through RE-FX. You can use SD module for sales process.
One of my previous implementations, we have achieved this through development between SAP SD & RE-FX. It is huge development and continuous monitoring is necessary.
The development is similar to IS-RE (component of ECO), create sales order for sales units. Instead of sales units, we made the development sell rental units through development whenever we created sales order for a rental object, just go to RE object and change the vacancy.
But this is not advisable to create integration with SD & RE-FX.
rgds,
Srini -
How to deal with Physical Inv and Q stock
Hi,
Can someone help me with the following query
How to deal with Physical Inv and Q stockHi,
The process remains the same. However when you create the PID ensure that it gets created using st. type as 2 (QI stock).
Hope that helps.
Regards,
Pravin -
How to deal with currency rate fluctuation
we have purchased some material from out of india in dollar currency.
Rate of dollar is suppose 48 and we have to pay this amount after 270 days and at that time suppose rate of dollar is Rs 50
how to deal with this Rs 2 increase in dollar which we have to pay in future.
two option
either we revaluate material every qtr
or we make a provision for decrease / increase in currency rate using a provision account and donot revaluate material every qtr
how to deal with currency rate fluctuationHi,
You have 3 options.
1.Fix the exchange rate in the PO before you post MIRO.
2.Enter the exchange rate in the MIRO screen while invoice posting.
3.At SPROMMLIVIncoming invoice configure how exchange rate diff are posted you can configure.
Regards,
Maybe you are looking for
-
LG Revolution receiving text messages
I just got this phone on 7/1. It was all programmed and I started using it. I was both sending and receiving text messages. I noticed that since 7/3 I have not been receiving text messages. I can still send them. I am sure it is probably something I
-
Clusterware on only one computer
It is possible to install oracle clusterware initially only on a computer, and then add the second, or is it mandatory to install on two computers. Using Oracle Clusterware for Oracle 10g. Edited by: 893012 on 24/10/2011 16:13
-
How to tell what service provider my iphone 4 is?
I go to settings>about>carrier and it just says "carrier 14.0"? How can I tell what carrier my iphone is?
-
After installing latest update the contact photos don't show on incoming call
After installing latest update the contact photos don't show on incoming call
-
I have Safari & FireFox browsers and itt doesn't seem to matter which one I'm on, this virus warning keeps popping up and completely shutting me down until I force quit and start over. I believe it to be a sales pitch, but I am not interested. How do