How to deal with forum spam

What is spam?
Occasionally, someone (usually a brand new poster) will come along and start submitting posts advertising a product or service. Spam can also be defined as the same message being posted over and over again.
We have guidelines in place to help prevent spam, as well as a number of measures that prevent certain keywords from being posted, but it isn’t fool proof and there are occasions when a spammer will go ahead and start posting about their product or service (which is usually completely unrelated to what the community is all about).
What happens when a moderator sees a spam post?
It’s very simple – we remove it as soon as possible. Spam posts tend to be a nuisance and the forum team have very clear and strict rules on what to do with spammers.
The forum managers (Sean and Stephanie) regularly review the kind of spam posts that manage to get through our filters, and continuously update the forum database with the patters and keywords that only spammers tend to use.
What happens if I see a post that I think is spam?
There will be times when a forum member will see a spam post before the moderator on duty has had a chance to remove it. If that forum member happens to be a Community Leader, they will usually help out by removing the offending post to a dedicated private area for the moderator to then deal with.
If any other forum member comes across this type of post, you can flag it to a moderator for review.
To do this, you need to click on the “Options” dropdown against the post and then click on “Report inappropriate content”, as shown below:
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

From what I remember, you needed Yahoo Plus (the "pay-for" service which allows POP access to email). Apparently you have this.
You will setup Mac Mail to be the junk mail filter, instead of relying on Yahoo to decipher what is considered junk mail. I am not sure what Yahoo offers for preferences. With Gmail, junk is kept on their servers, and everything received in the inbox can be fetched from Mac Mail.
Another thing to look into is IMAP access of your Yahoo account. This would allow you to sync all folders in your Yahoo account.

Similar Messages

  • Move of mailbox with over 30K of folders fails, how to deal with this.

    Hello all,
    I'm in the process of moving all Exchange 2010 mailboxes to newly created databases located on new storage.
    Every mailbox except one moved successfully, the "problem" mailbox keeps failing and I need some advise on how to deal with this.
    The mailbox that keeps failing is only 4 GB but has over 30K of folders that the users created manually over the years.
    They are unable to easelly delete folders as they have created many sub folders within the folders.
    I posted a part of the failed move request log below.
    Can anyone advise on how to solve this?
    Thanks in advance.
    21-2-2015 18:15:13 [EXHUB1] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
    Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=7574]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=360][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropWriteStream [45]
        Lid: 27962   ROP: ropSetProps [10]
        Lid: 27962   ROP: ropSaveChangesMessage [12]
        Lid: 17082   ROP Error: 0x4DA     
        Lid: 18273  
        Lid: 21921   StoreEc: 0x4DA     
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropSaveChangesMessage [12]
        Lid: 27420   dwParam: 0xE1F000B
        Lid: 36537   dwParam: 0xE1F000B
        Lid: 5587    StoreEc: 0x8004010F PropTag: 0xE1F000B 
        Lid: 33375   StoreEc: 0x8004010F
        Lid: 27420   dwParam: 0x806684B0
        Lid: 36537   dwParam: 0x806684B0
        Lid: 5587    StoreEc: 0x8004010F PropTag: 0x806684B0
        Lid: 64931   StoreEc: 0x8004010F
        Lid: 46509  
        Lid: 40193   StoreEc: 0x8004010F
        Lid: 5587    StoreEc: 0x8004010F PropTag: 0x30130102
        Lid: 21970   StoreEc: 0x8004010F PropTag: 0x668F0040
        Lid: 64319   dwParam: 0x5000
        Lid: 39743   dwParam: 0x6730
        Lid: 45016   StoreEc: 0x4DA     
        Lid: 57304  
        Lid: 5041    StoreEc: 0x4DA     
        Lid: 4465    StoreEc: 0x4DA     
        Lid: 6926    StoreEc: 0x4DA     
        Lid: 1750    ---- Remote Context End ----
        Lid: 31418   --- ROP Parse Done ---
        Lid: 21457  
        Lid: 19665   StoreEc: 0x4DA     
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
       at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
       at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
       at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.CreateMessage(T obj)
       at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
       at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
       at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
       at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
       at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
       at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
       at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.SortMessages(Object[] wiParams)
       at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
    Error context: --------
    Operation: IMailbox.SaveSyncState
    OperationSide: Target
    Primary (a4966c13-778a-4d70-9087-f077e2523f66)
    Key: FEF1D04E070AB74A99B809B7797674AE000000000000000000000000000000009B5540B45B37774CAB84806C1964B598
    SyncStateLength: 27050362
    21-2-2015 18:15:13 [EXHUB1] Relinquishing job.

    Hi,
    Based on the description, please run the following commands to check if there are any message limit size. Try to increase the limit size then move this mailbox.
    Get-mailbox –identity “user name” | fl MaxSendSize,MaxReceiveSize
    Get-transportconfig | fl MaxSendSize,MaxReceiveSize
    Get-transportrule | fl MessageSizeOver
    Get-sendconnector | fl MaxMessageSize
    Get-receiveconnector | fl MaxMessageSize
    Note: Once we increased the value we need to wait for the AD replication and cache to be cleared and then test the move mailbox.
    If this doesn’t work, please try to move mailbox with the skip corrupted items. This will skip the corrupted items and move only the good items to the target mailbox.
    Similar thread:
    https://social.technet.microsoft.com/Forums/en-US/5383a826-4383-4b26-a503-2c3bb635f9d2/mailbox-move-to-exchange-2010-fails-for-mailboxes-over-23-gb?forum=exchangesvrdeploylegacy
    Best Regards.

  • My iphone 5 open-close key does not work,how to deal with?, my iphone 5 open-close key does not work,how to deal with?, my iphone 5 open-close key does not work,how to deal with?

    I bought the iphone5 on your online store on Nov24. 2013, Last year, I came back China. more ten days before, my iphone 5 's open-close-key did not work. I contact Apple's China, but they told me that they could not help me repair the problem, how to deal with ?

    What is the "open-close" key?  Do you mean the power button or the home button?
    FYI, these are user to user support forums, you are not addressing Apple here.
    Warranty and support are ONLY valid in the country of origin.

  • How to deal with IO Exception: Not  Enough Space

    I always get the error message like IO Exception: Not Enough Space, following is the information on my desk , is not suppose have this happy is that right ?
    why ? and how to deal with ?? I use solars 10 with NetBean 6.9
    # df -k
    Filesystem kbytes used avail capacity Mounted on
    rpool/ROOT/s10x_u8wos_08a
    239468544 7338765 229954672 4% /
    /devices 0 0 0 0% /devices
    ctfs 0 0 0 0% /system/contract
    proc 0 0 0 0% /proc
    mnttab 0 0 0 0% /etc/mnttab
    swap 610684 348 610336 1% /etc/svc/volatile
    objfs 0 0 0 0% /system/object
    sharefs 0 0 0 0% /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap1.so.1
    237293437 7338765 229954672 4% /lib/libc.so.1
    fd 0 0 0 0% /dev/fd
    swap 610484 148 610336 1% /tmp
    swap 610360 24 610336 1% /var/run
    rpool/export 239468544 23 229954672 1% /export
    rpool/export/home 239468544 63960 229954672 1% /export/home
    rpool 239468544 34 229954672 1% /rpool
    #

    Thank you for all the replies.
    Just have time come to this forum:
    think you are running out of swap space.Google surge this too,
    at first I install solaria I give 512M out of totally 2G in memory,
    then I run
    # zfs create -V 512M rpool/additionalswap
    # swap -a /dev/zvol/dsk/rpool/additionalswap
    on meantime
    swapfile dev swaplo blocks free
    /dev/zvol/dsk/rpool/swap 181,3 8 1048568 1048568
    # df -k
    Filesystem kbytes used avail capacity Mounted on
    rpool/ROOT/s10x_u8wos_08a
    239468544 7280779 230012901 4% /
    /devices 0 0 0 0% /devices
    ctfs 0 0 0 0% /system/contract
    proc 0 0 0 0% /proc
    mnttab 0 0 0 0% /etc/mnttab
    swap 392944 352 392592 1% /etc/svc/volatile
    objfs 0 0 0 0% /system/object
    sharefs 0 0 0 0% /etc/dfs/sharetab
    /usr/lib/libc/libc_hwcap1.so.1
    237293680 7280779 230012901 4% /lib/libc.so.1
    fd 0 0 0 0% /dev/fd
    swap                  392760     168  392592     1%    /tmp
    swap                  392616      24  392592     1%    /var/run
    rpool/export 239468544 23 230012901 1% /export
    rpool/export/home 239468544 63989 230012901 1% /export/home
    rpool 239468544 34 230012901 1% /rpool
    /vol/dev/dsk/c7t0d0/unnamed_rmdisk:c
    15618080 1985728 13632352 13% /rmdisk/unnamed_rmdisk
    Edited by: Hjava on Nov 25, 2010 8:40 PM
    Edited by: Hjava on Dec 9, 2010 2:09 AM
    this link is useful
    http://docs.sun.com/app/docs/doc/817-5093/gizet?l=zh_TW&a=view

  • How to deal with the light of picture??

    how to deal with the light of picture?? it must be natural~~

    You may have posted in the wrong forum. If you provide more information about exactly what it is you're trying to accomplish, someone can probably direct you to a relevant forum.

  • How to deal with deadlock on wwv_flow_data table when http server times out

    There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
    In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
    Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
    the user will try to refresh the page with the bad performing query.
    And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
    How to deal with it?
    First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
    In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
    Secondly you could increase the timeout parameter of the http server. Although this not the best way.
    Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
    regards,
    Mathieu Meeuwissen

    Hello Shmoove,
    I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
    I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
    I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
    POST /up01/up02.aspx HTTP/1.1
    Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
    Connection: Keep-Alive
    Content-length: 6294
    User-Agent: UNTRUSTED/1.0
    Host: szekely.dnsalias.com:80
    Transfer-Encoding: chunked
    400: Client to Server (126 bytes)
    78
    --xxxxyyyyzzz
    Content-Disposition: form-data; name="pic"; filename="david.jpg"
    Content-Type: application/octet-stream
    400: Connected to Server
    400: Server to Client (112 bytes)
    HTTP/1.1 100 Continue
    Server: Microsoft-IIS/5.1
    Date: Wed, 23 Mar 2005 00:47:02 GMT
    X-Powered-By: ASP.NET
    Any help will be appreciated,
    David

  • How to deal with OpenCL grey out issue.

    First off, I'm not native english speaker.
    I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
    I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
    open a command windows (using WinKey + R, and type cmd <enter>)
    type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
    type "sniffer_gpu" <enter>  -->> to check your GPU has OpenCL in Photoshop?
    When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
    C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
    Device: 0000000000328D68 has video RAM(MB): 1023
    Vendor string:    NVIDIA Corporation
    Renderer string:  GeForce GTX 550 Ti/PCIe/SSE2
    Version string:   3.0.0
    OpenGL version as determined by Extensionator...
    OpenGL Version 3.0
    Has NPOT support: TRUE
    Has Framebuffer Object Extension support: TRUE
    OpenGL ok
    Return code: 1
    C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
    No OpenCL support
    Then, I switch GPU back to normal status (core running at 900Mhz)
    C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
    Device: 00000000001F8D68 has video RAM(MB): 1023
    Vendor string:    NVIDIA Corporation
    Renderer string:  GeForce GTX 550 Ti/PCIe/SSE2
    Version string:   3.0.0
    OpenGL version as determined by Extensionator...
    OpenGL Version 3.0
    Has NPOT support: TRUE
    Has Framebuffer Object Extension support: TRUE
    OpenGL ok
    OpenCL ok, version=1.1 CUDA 4.2.1
    Return code: 3
    C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
    OpenCL support !!
    Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
    I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
    Bye.

    Do check the following link
    http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

  • How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

    Hi everybody,
    I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
    Setup Project to install it.
    Here is what I did for the "Class Library":
    1. Finish the program.cs, Service.cs
    2. Add Installer
    3. Change the serviceInstaller so that "StartType" to be Aotumatic
    4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
    5.
    6. Click in F5 (Start Debugging)
    Here is what I did for the Setup Project:
    1. Add the exe file built from the "Class Library" project to the Application Folder
    2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
    3. Change the property of the project so that "RemovePreviousVersion" to be true
    4. Click on F6(Build Solution)
    Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
    1. After unstall, the registry was not cleaned up about the installed program
    2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
    My questions are:
    1. How to cleanup the registry when uninstall a program?
    2. How to deal with the "Error 1001. The specified service already exists"?
    3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
    Thanks a lot!
    Helen

    Hi Simon, not a problem!
    I spent some more time on this and here are few more notes:
    it is called Major Upgrade, when you are installing new version of the product upon a previous one and
    MSI supports 2 strategies:
    Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
    installed files)
    Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
    From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
    will be reverted to the previous state and it'll be still functional. 
    Let's consider both strategies:
    Consider you have installed product_v1.msi and you want to install product_v2.msi.
    Strategy 1
    1. MSI engine copies files from Product_v1 directory to TEMP directory
    2. MSI engine merges files based on the assembly version (between v1 and v2)
    3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts  action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
    Strategy 2
    1. MSI engine tottaly removes all files from v1.
    2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts  allready worked out and MSI doesn't have files to revert machine back
    I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
    here.  So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
    AND, you got "Error 1001. The specified service already exists"
    because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
    installation and  they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
    and delete), like this:
    *clip*clip*clip*
    ' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
    ' Update the Service Entry to stop and delete service while uninstalling
    query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
    + componentName + "')"
    Set view = database.OpenView(query)
    : CheckError
    view.Execute : CheckError
    ' Update the Service Entry to stop and delete service while installing
    query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
    + componentName + "')"
    Set view = database.OpenView(query)
    : CheckError
    view.Execute : CheckError
    *clip*clip*clip*
    We can uninstall service first by following Strategy 2, but then we lose transactional support.
    So, Simon did I encourage you to change your code a bit?:)
    And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
    Hope it will help to everybody!
    See also more advanced explanation of how MSI works
    here.
    Truly yours, Marat

  • How to deal with credentials for external applications using a Java Client/

    Hi Guys,
    This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
    However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
    Regards

    You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
    The Credential Store Framework:
    - enables you to manage credentials securely
    - provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
    Check the documentation on CSF API -
    http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
    Major Steps -
    1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
    2. Use CSF API to retrieve the stored password
    3. In jazn-data.xml give permissions to access CSF key and map

  • How to deal with payment of vendor to us (credit notes I guess)

    Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
    We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
    I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
    How to deal with this kind ot transactions? What transaction can I use the best for payments like this
    (we got paid an amount , no invoices yet, but I know the vendor).

    whith F-02 it is possible I noticed.

  • How to deal with file(for example .xml)? what format of dir should be?

    I'd like to operate the file in disk, and want to use relative directory?
    How to deal with file dir? what format of dir should be?

    Hi Kamlesh,
    Thanks for your response.
    Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
    31/03/08 - 2300000.00
    30/04/08 - 3100000.00
    Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
    When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
    Last Balance: INR -7,000,000.00000 (Grayed out by the system)
    Ending Balance: INR -3,100,000.00000 (Entered by me)
    End Date: 30/04/08 (Entered by me)
    "Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
    Cleared Book Balance: INR -7,000,000.00000
    Statement Ending Balance: INR -3,100,000.00000
    Difference: INR 3,800,000.00000
    As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
    Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
    That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
    Thanks in Advance....
    Regards,
    Kaushal

  • Organizational unit transfers ,how to deal with the person in it ?

    Hi,All,I need your help!
    if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

    Hi
    In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
    All the person are assigned to position so nothing needs to be done in  PA.
    Reward points if useful.
    Regards

  • IMac SSD full - how to deal with the two drives

    Greetings all,
    I've been using an iMac i7 with two drives SSC and HDD.  Recently, I've been having issues with the SSD being close to full.  I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.)  I use Lightroom and have all the images on the spinning drive.  Does anyone know how to deal with this issue?  Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
    Thanks in advance for your help.
    erlkonig

    Here's some utilities for analyzing disk space:
    DiskInventory
    GrandPerspective
    OmniDiskSweeper
    WhatSize
    You might want to consider putting your home directory on the HDD.
    How to Move the Home Folder in OS X – and Why
    Moving your home folder in OS X

  • How to deal with the barcode?

    i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
    i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
    i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?

    yes, look for a cheaper component...
    Or write your own...
    Or save up until you can afford the more expensive ones...

  • How to deal with the growing table?

    Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
    I am developing an application system now. Should I add a lot of delete commands in the code for each table?

    junez wrote:
    Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
    I am developing an application system now. Should I add a lot of delete commands in the code for each table?Uh, well, yes if you continually add rows to a table the table will grow ... sooner or later you will want to delete rows that are no longer needed. What did you expect? You have to decide what the business rules are to determine when a row can be deleted, and make sure your design allows for such rows to be identified. This is called ..... analysis and design.

Maybe you are looking for

  • Main VI Menu event calling a subVI front panel

    Hi all, I have a subVI whose front panel is loaded upon calling by a main VI. I call the subVI using a User-menu event. the subvi-properties are set to allow close window and i am not handling a 'panel close' event. The problem is.... when i run the

  • How to assign Vendor balance Confirmation form to F.18

    Hi All, I have customized the vendor balance confirmation form and program. Is it possible to assign this to Transaction code : F.18, if yes where to specify this. Thanks and Regards Parthi.

  • Error in changing the name of an event

    When I go to change the name of an event in imovie it gives me this message "Move Failed - This file could not be moved: /Users/asrevelli/Movies/iMovie Events.localized/July- - Day 18 (-5000) Anybody know what the deal with this is? I can change the

  • Address Book - duplicating a record

    One of the most basic functions of any database ever created is "Duplicate Record." The verb duplicate, not the noun. If I want to send USPS mail to ten colleagues at this address: John Doe President Acme, Beta and Crumhorn Widgets 10234 Long Winding

  • How to dynamic set messageInputText item data type?

    Hi, I have a LOV and other messageInputText items on the page. I need to be able to change the messageInputText item data type based on the value selected from LOV. How can I do that? DD