How to deal with "Script stopped responding" in general Part 3

OK, I have asked about this issue before, and am back because it won't go away.
First, I have tried resetting Firefox. Yesterday was the most recent time.
I have tried using add-on Script Blockers.
The Script Blocker program worked for a while. The problem is that the primary source of the script problems are Hotmail and Gmail, and I need to have these functioning and open. Plus it is not easy to determine what a script does before deciding to let it in.
So I'm going to start from the computer user perspective: Why does this happen at all?
I understand the need for scripts to be used for websites to function. What I don't understand is why my entire computer slows to a crawl, some programs get cut off entirely, and then I have to try to figure out what webpage is causing the problem...slowly. Even when I click the box to stop the script, my computer is still incredibly slow for an unreasonable amount of time. By unreasonable amount, I mean that it is so long that I can't even close Firefox within 5 minutes just to make it stop. By unreasonable amount, I mean I have actually just set my computer to restart so that Firefox will be forced closed and then cancel the restart when Firefox shuts down.
What can Hotmail, Gmail, or any other program be doing that is of sufficient importance that it can essentially take over the computer? Nothing that isn't critical to the functioning of the computer should have this power. There is nothing critical about a script on Hotmail while I'm not even using that should let it take over all of the computer's resources. I would rather have Hotmail crash and shut off than have it let a script take over my computer. I can click on my Hotmail start up button within seconds while a script that won't respond might take 15 minutes to deal with.
So can someone please explain to me why this system exists? Why isn't there a command that says "a script may use up this amount of processing power only" that allows a person to keep using their computer while the script futily whirls away? Why isn't there a way to have an automatic setting like "let a script try to run for X seconds and if it doesn't work just stop it"? Why doesn't a window pop-up on the computer screen regardless of where the script problem is to alert you what webpage is causing the problem instead of making the user guess?
There doesn't even seem to be much purpose to the scripts. If I stop a script that is not responding on Hotmail, I can still use Hotmail when the computer recovers. So why does this happen?
This system seems insane to me. Honestly, I don't understand why scripts are allowed to do this. Can someone at least help with an explanation of why this happens? Why there isn't a way to make it stop? In a world of apps it seems like something that would kill non-responding scripts after a brief time would be a winner. How did we reach this chokepoint in computer functioning and why haven't we figured out how to stop it?
Thank you for any help, whether it be fixing the problem or just explaining the purpose.

Hi auzziewog, a couple of thoughts on long pauses.
In some cases, this is caused by Firefox waiting on content from the server, or loading some content into a plugin. Other than blocking some extraneous content in pages and setting plugins to "Ask to Activate" (click-to-play) on the Add-ons page, this is a hard problem to solve.
If the problem is a script (the eventual appearance of the dialog suggests that possibility), please see the above reference post.
Perhaps it is a combination of those things, since scripts often run after some other elements are loaded...

Similar Messages

How to deal with multiple language SQL script?

Hi All,
We now want to create a SQL script that contains multiple languages(English, Chinese, Japanese), this script need to be run at there different database installed on different OS, for example, Oracle9i on Windows 2000 English Edition/Chinese Edition/Japanese Edition.
If I save the file as ANSI format, this file will only be recognized at local OS(e.g. the Chinese and Japanese character will not be normally displayed on other OS, if I run the script, the CH/JP characters will not be stored normally in DB).
If I save the file as Unicode format, this file can be recognized by all three OS, but Oracle SQL Plus will not recognize it, thus we can't run the script.
Who can tell me how to deal with this issue? Is it possible to save only one script that can run on different language OS?
Thanks,
Spark

Hi,
The ISQLplus supports multiple languages, but there will be following problems for my case:
1.ISQLplus don't support Unicode format script too, so I must save the file as ANSI format.
2.To display the characters normally depends on the database server's platform. I create a script contain three languages with ANSI format in Chinese OS, but if I want to load this script to database server installed on English OS via ISQLplus, the Chinese characters will not be displayed normally too.
PS:
So, I think this is not only related with Oracle but also the Windows OS, it is hard to create one file with ANSI format that can be displayed normally in different platforms.
Thank you all the same,
Spark

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

How to deal with generated programs in eCATT SAPGUI recording?

Hi experts and professionals,
I am trying to automate testing of our solutions by eCATTs and so far i have not been able to find solution for following problem.
Whole test scenario is very simple:
Check InfoProvider data (query, lookup, listcube,...)
Create DAP on InfoProvider
Archive InfoProvider
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 4. (must match)
Reload archived data
Check InfoProvider data (query, lookup, listcube,...) again
Compare results from step 1. and 7. (must match)
As you can see, one of the required test steps is to check InfoProvider's data in transaction LISTCUBE.
But transaction LISTCUBE generates its program "name" every time it is executed and
I am struggling to find a way how to deal with these generated programs in eCATT SAPGUI recording.
Key is that solution must be generic and work for all SAP BW releases from 7.0 upwards
(having in mind that LISTCUBE can read NLS data from SAP BW 7.3 release).
Error description from eCATT log:
Screen Check Error: Expected Transaction: LISTCUBE, Actual Transaction: LISTCUBE.
Expected Program: GP0KOZE7EFIUBN10MZUFWX90W80, Actual Program: GPBP24INA6VV77SL0XKU5NA642O.
Expected Screen Number: 1000, Actual Screen Number: 1000.
There Is Probably an Error in SAPGUI recording.
ExceptionClass:CX_ECATT_APL_CAPTURE ExceptionId:SCREEN_CHECK_ERROR
RaisingClass:CL_APL_ECATT_LINE_INTERPRETER Include:CL_APL_ECATT_LINE_INTERPRETER=CM00J Line:443
Is there any way how to avoid program check in eCATT script?
Anything that would help me to find solution will be greatly appreciated.
Best Regards,
Igor

Dear Igor,
Your issue is caused by the "screen check" which eCATT processes here.
In General this screen check is a very usefull activity, since is ensures that only those screens are processed by automation, which initially where recorded. This should ensure as much as possible to invoke only intended activities.
Remember, that the driver of the screen flow is still the automated transaction program ( but not the test tool). So application logic decides which screen is send next.
Using screen check the test tool tries to ensure that menu items and buttons and other activities are only automated when the tool "believes" to work on the intended screen.
For generic test scripts and often in context of generated programs the screen check might hurt a bit.
To overcome this, one might try to make the check dynamic (as Sheetal suggests correctly).
If here the name of program cannot be determined for any reason, one can use another method and do following:
- Change the value of ProcessedScreen-Active to 'R'
This will disable/skip the screen-check for this ProcessedScreen.
Sure the solution includes a certain risk, since not checking the correct screen to appear might lead to automation of actions with not desired impact.
Maybe this can improve your solution.
Kind Regards
Jens

How to deal with dynamic IP address changes

I have installed Fodero C3 and Oracle 10g successfully. Oracle 10g use web OEM console to manage database. However, my internet provider only provided me a dynamic IP address. When I installed Fedora C3, Linux server automatically picked a Hostname like " ip12-345-678-90.dc.dc.cox.net". After I created database, all database files also used this hostname. Then Oracle web OEM console worked fine. Due to the dynamic IP address assigned by ISP, their DHCP server changed the first part of IP address(ip12-345-678-90)frequently to another one. After IP address changed, I couldn't start up web OEM console and listener because they couldn't find correct hostname (IP address). I have talked to my ISP. It seems that it can not be solved. Anyone knows how to deal with this problem through 10g and OEM console themseleves. I also think about to configure Linux server to solve the problem. I really need your help. Thanks in advance

Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.

How to deal with this problem?

How to deal with this problem?
We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
I want to know, in this situation, should I discard most of the existing scripts?
Are there any other solutions?

Allowing writes from both cache & DB is possible with its own set of issues.
The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache.

How to deal with files ?!!!!

hiii, guys i dont believe that a huge program like flash with
all these abilities doesnt deal easily with files !!! I just want
to do simple reading and writing to text files. Something veryyyyyy
simple like writing a name and reading it again later
!!!!!!!!!!!!!!!!!! i know how to load them by using loadVariable()
,,, but how can i write to the file ?!! it's really annoying if i
have to use asp scripting or xml or ... to do such easy job !!! i'm
facing difficulties because i know ActionScript and VB and C++
only,,, I dont know how to deal with asp and xml !!! @_@
But, if this is the only way to do this, plz tell me in steps
how to write a name and read it again in flash, THANX

If you are sticking to those three languages and you have
Flash CS3, you may want to consider publishing to an AIR
application. Adobe's done a lot of work to keep the security tight
on Flash Player which is one (if not the only... not sure) reason
that you cannot do this with Flash alone. You would have to use a
server-side script to accomplish what you want with Flash Player.
Here is a tutorial on an AIR app that writes to txt files:
http://www.adobe.com/devnet/air/flash/quickstart/building_text_editor.html

How to deal with multiple disk path's

hi
i'm setting up a new server with virtual servers with extra io domain's
now i have a question on how to deal with multiple disk path's
so following questions:
- can i enable multipath on the primary and on the alternate domain?
i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
- if i can't enable multipathing how to handle this
for example a disk has on the primary domain 4 path's to a disk
do i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
if i do the first is adding all the path to the same mpgroup enough or not

Hello
1.-can i enable multipath on the primary and on the alternate domain? Yes. i understand for multipath mpxio or similar.
2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths. That's is what you have to use in a vds.
Please check this doc to see the best practice to ldom
white-paper-ldom
regards
eze

HOW TO DEAL WITH ADDRESS_INTO_PRINTFORM

Scenario:
Call FM ADDRESS_INTO_PRINTFORM with the Address Type = 1, ADDRESS_NUMBER = ADRNR, SENDER_COUNTRY = LAND1 and NUMBER_OF_LINES = 6. Read the exporting parameter ADDRESS_PRINTFORM and populate the fields Ship-To Name with LINE0 and Ship-To Address Line 1, 2, 3, 4 and 5 with LINE 1, 2, 3,4,5 respectively.
can anyone suggest me how to deal with it..point will be rewarded for an attempt.Thankyou

Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.

How to deal with OpenCL grey out issue.

First off, I'm not native english speaker.
I have Nvidia GeForce 550 Ti video card, and its support OpenCL v1.1.
I'm also face a "random" OpenCL grey out issue like other people here, but I found the "issue" and how to deal with.
open a command windows (using WinKey + R, and type cmd <enter>)
type "cd C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)" <enter>
type "sniffer_gpu" <enter> -->> to check your GPU has OpenCL in Photoshop?
When GPU is in power-saving mode (core running in 51Mhz, using MSI Afterburner monitor), I running sniffer_gpu, got this report
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 0000000000328D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
Return code: 1
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
No OpenCL support
Then, I switch GPU back to normal status (core running at 900Mhz)
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>sniffer_gpu
Device: 00000000001F8D68 has video RAM(MB): 1023
Vendor string:    NVIDIA Corporation
Renderer string: GeForce GTX 550 Ti/PCIe/SSE2
Version string:   3.0.0
OpenGL version as determined by Extensionator...
OpenGL Version 3.0
Has NPOT support: TRUE
Has Framebuffer Object Extension support: TRUE
OpenGL ok
OpenCL ok, version=1.1 CUDA 4.2.1
Return code: 3
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)>
OpenCL support !!
Nowadays, most of new GPUs were support power-saving, but when sniffer_gpu running at GPU power-saving state, the OpenCL computing report maybe "time-out", cause the detector "guess" the GPU does not support OpenCL. This is why many people says "OpenCL" sometimes work, sometimes grey-out.
I hope this bug can be fixed, or at least people can understand how to "enable OpenCL everytime when you launch photoshop".
Bye.

Do check the following link
http://blogs.oracle.com/soabpm/2010/01/soa_suite_11g_weblogictransact.html

How to deal with credentials for external applications using a Java Client/

Hi Guys,
This is the case. I am integrating an external application with an ADF Application. I have implemented some programmatic ViewObjects that are being filled up by a REST Java Client Wrapper. Everything is working fine but the issue is that the credentials the wrapper is using are hard coded inside the java class. I am thinking to ask for the credentials at the beginning of my taskflow and then store them somewhere and use them then to create my client wrapper (passing them in the constructor).
However, I don't know if my approach is good and I would like you to share your experiences or how to deal with this.
Regards

You can use Credential Store Framework to store the credentials securely in the weblogic server instead of hardcoding in the java class.
The Credential Store Framework:
- enables you to manage credentials securely
- provides an API for storage, retrieval, and maintenance of credentials in different back-end repositories
Check the documentation on CSF API -
http://docs.oracle.com/cd/E29505_01/core.1111/e10043/devcsf.htm
Major Steps -
1. Create a credential map and key in em console to store the password (http://docs.oracle.com/cd/E25054_01/core.1111/e10043/csfadmin.htm)
2. Use CSF API to retrieve the stored password
3. In jazn-data.xml give permissions to access CSF key and map

How to deal with payment of vendor to us (credit notes I guess)

Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
How to deal with this kind ot transactions? What transaction can I use the best for payments like this
(we got paid an amount , no invoices yet, but I know the vendor).

whith F-02 it is possible I noticed.

How to deal with file(for example .xml)? what format of dir should be?

I'd like to operate the file in disk, and want to use relative directory?
How to deal with file dir? what format of dir should be?

Hi Kamlesh,
Thanks for your response.
Actually, In the "Process External Bank Statement" window, i see that there are few entries which is for the previous year and which has not been reconciled. I have never worked practically on BRS and hence, i am scared to make any changes in the clients database without being confident on what i am doing. I need to reconcile for one of their Bank a/c for the month of April '08. I have the copy of the statements for the month ending 31st Mar 08 and 30th Apr 08. The closing balances are as below:
31/03/08 - 2300000.00
30/04/08 - 3100000.00
Now my OB for Bank a/c for April '08 in SAP is 2300000.00 Dr.
When i go to External Bank Reconciliation - Selection Criteria Screen (Manual Reconciliation), here are the detail that i enter:
Last Balance: INR -7,000,000.00000 (Grayed out by the system)
Ending Balance: INR -3,100,000.00000 (Entered by me)
End Date: 30/04/08 (Entered by me)
"Reconciliation Bank Statement" Screen opens up and shows the below balances in the screen:
Cleared Book Balance: INR -7,000,000.00000
Statement Ending Balance: INR -3,100,000.00000
Difference: INR 3,800,000.00000
As per the Bank statement, i have found all the transactions listed out here for the month of Apr '08 but, i also found that the open transactions for the previous month from April '08 have been lying in "Process External Bank Statement" window.
Could you please help me solve my issue as to what needs to be done or could you also get me some links from where i can get few documents for processing External Bank Reconciliations?
That will be of a great help for me. I need steps as to what needs to be done first and then the next so that i can arrive at the correct closing balance for the month April '08.
Thanks in Advance....
Regards,
Kaushal

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

How to deal with "Script stopped responding" in general Part 3

Similar Messages

Maybe you are looking for