How to deal with the automatic 6to4 addresses in the network

As we use public IPv4 address in our network, each computer automatically gets an 6to4 address. I understand after the World IPv6 Lauch, these computers may use the 6to4 address to talk to IPv6 enabled websites through the free and unmanaged 6to4 gateways on internet. This may cause unmanaged connectiviy issues. How to prevent this? How would you deal with this? Is there a way to stop these computers to get the automatic 6to4 addresses?
Thanks.

I know this may not be the answer you're looking for...
But what about considering implementing IPv6 within your network? (dual-stack)
When the computers have native IPv6 connectivity, they should always prefer using the native IPv6 connection rather than any of the tunneling mechanisms such as 6to4.
Instead of looking at this as a "unmanaged" problem, look at this as "managed" connectivity service.
So by enabling IPv6 within your network, you get two things done.
1) Your network steps into the future.
2) Your clients (managed and unmanaged) will have native connectivity to both IPv4 and IPv6 resources, just like you do with IPv4-only resources today, and then you don't have to worry too much about 6to4.

Similar Messages

How to deal with a large project (perhaps using the Daisy Trail Approach)?

Hi,
My intital problem was that I needed the screen to pause so that the user could interact with the spry menus and image maps. In other threads, I noticed that you added click boxes to prevent the screen from moving on. However, whenever I clicked on the spry menus or image maps, the screen moved on without giving me the chance to interact more on the screen. Furthermore, the screen faded away to white. I decided to use the timeline and make each slide last for at least 60 seconds. However, whenever I tried to do this for the entire project, it crashed, repetitively, The project has become too big - it is 164 slides.
I read in another thread that you can break the project up using the 'Daisy Trail' Apprach. When one chunk of the project finishes, you can execute another swf file to open and so on until they all open in sequence. I am wondering, how does this approach work exactly and will I still be able to use spry menus, i.e. will I still be able to insert links to the other parts of the project? Or does this approach mean that I must create a web page in order to add the links of these separate swf files and will this also make my spry menus and design defunct?
Any help on this would be greatly appreicated.
Many thanks.

Hi,
If I can prevent the screen from fading away whenever it pauses, I think that would be a good start (as you suggested). I tried this before, having read other threads but am having the same problem - it still fades away. I have done the following:
In Preferences, Defaults, I have commanded the objects to display for rest of slide, and for the effect to have no transition.
In Prefererences, Start and End, I have deselected the fade on first and end slides.
When I right-clicked on the actual slide, and tried to select Transition, No Transition, nothing happened. It wasn't even possible to select this option or the others from this menu. No tick was shown to show that it was selected.
Is there anyting else I can do or something I'm doing wrong? Thanks for any help!

How to deal with Physical Inv and Q stock

Hi,
Can someone help me with the following query
How to deal with Physical Inv and Q stock

Hi,
The process remains the same. However when you create the PID ensure that it gets created using st. type as 2 (QI stock).
Hope that helps.
Regards,
Pravin

How to deal with the change in address of plant,

how to deal with the change in address of plant,companycode,sales org etc.?

Hi,
Do you want to change the address of Company code, Plant and Sales org?
Follow the menu path in SPRO.
SPRO >> Enterprise structure >> Definition >> Financial accounting >> Define Company code >> Edit company code >> Click on address and change.
.. Definition >> Sales and Distribution >> Define ...sales org >> select the sales org and click on address and change.
... Definition >> Logistics - general >> Plant >>>> Click on address and change.
Regards,
K Bharathi

How to deal with dynamic IP address changes

I have installed Fodero C3 and Oracle 10g successfully. Oracle 10g use web OEM console to manage database. However, my internet provider only provided me a dynamic IP address. When I installed Fedora C3, Linux server automatically picked a Hostname like " ip12-345-678-90.dc.dc.cox.net". After I created database, all database files also used this hostname. Then Oracle web OEM console worked fine. Due to the dynamic IP address assigned by ISP, their DHCP server changed the first part of IP address(ip12-345-678-90)frequently to another one. After IP address changed, I couldn't start up web OEM console and listener because they couldn't find correct hostname (IP address). I have talked to my ISP. It seems that it can not be solved. Anyone knows how to deal with this problem through 10g and OEM console themseleves. I also think about to configure Linux server to solve the problem. I really need your help. Thanks in advance

Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.

How to deal with "Error 1001. The specified service already exists" when install a service using installer package?

Hi everybody,
I wrote a "Class Library" project which is a service using Visual Stodio 2008 recently, then tried to use a Visual Studio 2008
Setup Project to install it.
Here is what I did for the "Class Library":
1. Finish the program.cs, Service.cs
2. Add Installer
3. Change the serviceInstaller so that "StartType" to be Aotumatic
4. Change the ServiceProcessInstaller2 so that "Account" to be LocalSystem
5.
6. Click in F5 (Start Debugging)
Here is what I did for the Setup Project:
1. Add the exe file built from the "Class Library" project to the Application Folder
2. On the Custom Action Editor, add the exe file from 1 to Install and Commit
3. Change the property of the project so that "RemovePreviousVersion" to be true
4. Click on F6(Build Solution)
Then I tried to run the msi file from the built of the Setup Project. Because I modified the two projects serveral times, I uninstalled the Class Library using "Control Panel->Add or Remove Programs" before I reinstall. Two things I notived:
1. After unstall, the registry was not cleaned up about the installed program
2. After several rounds install/uninstall, I got "Error 1001. The specified service already exists"
My questions are:
1. How to cleanup the registry when uninstall a program?
2. How to deal with the "Error 1001. The specified service already exists"?
3. Did I do anytbing wrong with the "Class Library" or the "Setup Project"?
Thanks a lot!
Helen

Hi Simon, not a problem!
I spent some more time on this and here are few more notes:
it is called Major Upgrade, when you are installing new version of the product upon a previous one and
MSI supports 2 strategies:
Strategy 1. Install a new version and uninstall previous one. (Install a new version right upon previously installed version (file merging is performed based on dll version number) and the delete previously
installed files)
Strategy 2. Uninstall previous version and install a new one (Delete all previous files and install from scratch new files.)
From the first look it seems that 1st strategy is weird and buggy. But, remember, MSI is great because it's transactional!!! That means that if once some of the phases (Installation, Uninstallation, Rollback, Comit) fails, your machine
will be reverted to the previous state and it'll be still functional.
Let's consider both strategies:
Consider you have installed product_v1.msi and you want to install product_v2.msi.
Strategy 1
1. MSI engine copies files from Product_v1 directory to TEMP directory
2. MSI engine merges files based on the assembly version (between v1 and v2)
3. Once merging is completed successfully it removes files in TEMP (RemoveExistingProducts action triggers it) and you got product_v2 installed, otherwise if it fails MSI engine revert machine to V1 and copies previous files from TEMP.
Strategy 2
1. MSI engine tottaly removes all files from v1.
2. MSI engine installs v2 files and if something goes wrong you cannot revert back, because RemoveExistingProducts allready worked out and MSI doesn't have files to revert machine back
I recommend to everybody to use Strategy 1 and leverage MSI transaction functionality. And you can set this strategies by defining sequence of RemoveExistingProducts action. See more info
here. So, I think it's not even a bug in VS as I said in the upper post it is default recommened behaviour.
AND, you got "Error 1001. The specified service already exists"
because if we follow Strategy 1 MSI engine tries to install Windows Service on top of the existing service and OF COURSE it fails MSI engine (StopServices, DeleteServices actions are executed before actual
installation and they look at ServiceControl table). In order to stop service first and delete them you have to fill ServiceContol table of the MSI (and then StopServices, DeleteServices actions will recognize what to they have to stop
and delete), like this:
*clip*clip*clip*
' see http://msdn.microsoft.com/en-us/library/windows/desktop/aa371634(v=vs.85).aspx for more info
' Update the Service Entry to stop and delete service while uninstalling
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD_Service', 'Service name', '160', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
' Update the Service Entry to stop and delete service while installing
query = "INSERT INTO ServiceControl (ServiceControl, Name, Event, Arguments, Wait, Component_) VALUES ('MAD2_Service', 'Service name', '10', '', '1', '"
+ componentName + "')"
Set view = database.OpenView(query)
: CheckError
view.Execute : CheckError
*clip*clip*clip*
We can uninstall service first by following Strategy 2, but then we lose transactional support.
So, Simon did I encourage you to change your code a bit?:)
And, btw, if you don't want to change the strategy, please don't rely on SequenceID in MSI table, it can be change, you have to get the at the runtime.
Hope it will help to everybody!
See also more advanced explanation of how MSI works
here.
Truly yours, Marat

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with the barcode?

i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?

yes, look for a cheaper component...
Or write your own...
Or save up until you can afford the more expensive ones...

How to deal with the growing table?

Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?

junez wrote:
Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?Uh, well, yes if you continually add rows to a table the table will grow ... sooner or later you will want to delete rows that are no longer needed. What did you expect? You have to decide what the business rules are to determine when a row can be deleted, and make sure your design allows for such rows to be identified. This is called ..... analysis and design.

How to deal with the rejected stock if it is rjected by QC

Dear All,
please let me know how to deal with the rejected stock from Quality point of view.i.e., for incoming materails and Finished if returned from customer
Regards,
P.Vijaya

hi
if material is rejected for incoming material then you can create Notification for incoming material due to you can return back material with print for that you have to record defects in result recording. in T-code QM02 if result is recorded with defects. or you can create with Qm01.against vendor
if material is returned from costumer you can create inspection lot for that for that you have to maintained inspection type 06 in material master. you can result record for that you can create notification for that. or rework for this material as per quality check or can scrap
if have any problem please come back
regards
Pravin

How to deal with '$' sign in the class name?

I want to put my Java Applet game on my homepage. But the server which I set up my homepage doesn't support the file name like XXX$XXX.class, which has '$' sign in the file name. Would anyone can tell me how to deal with this problem? And how can I make the game work on my homepage? Thanks.

Don't forget, this include both concrete inner classes as well as any anonymous inner classes you create, like
myButton.addActionListener(new ActionListener()
// Yada Yada Yada

How you deal with the situation if the vendor/supplier is also a customer ?

Dear All,
Could you please help me with the idea on how to deal with the suppliers/vendors who also are customers to you in MM?
Thanks in advance,
Ranjan

It depends what you are intentions are..
However
1. Create a customer master record for that vendor that is also a customer.
2. Enter Vendor number in Vendor field in control data-customer master record.
3. Enter customer number in Customer field in Control data- vendor master record
Finally, Check "Clrg with vend." field or "Clrg with cust." field

When opening aperture I get Warning that says There was an error opening the database for the library "~/Desktop/Feb 12, 2011.aplibrary". I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?

When opening Aperture I get Warning that says "There was an error opening the database for the library “~/Desktop/Feb 12, 2011.aplibrary.” That's it. The program does not open at all. I'm concerned that my pictures may be lost. Does anyone know how to deal with this Warning?

Might just need to rebuild the library...see this link:
Aperture 3: Troubleshooting Basics

While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

While installing latest version of iTunes error "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead" how to deal with it ?

Doublechecking. What's the filename of the installer you've been downloading? (The 32-bit installer is called iTunesSetup.exe, and the 64-bit installer is called iTunes64Setup.exe.)

How to deal with the automatic 6to4 addresses in the network

Similar Messages

Maybe you are looking for