How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

Hi,
Our Terminal Server is running out of hard disk space, and the major files which occupy most of the space are *.ost files of the Outook, which come form the users which use the Terminal Server all the time through remote desktop. The Outlook is installed
on the Terminal Server and various users can use it.
What would be a solution in this case. Is there a way to limit the size of the *.ost files? I read in forums that having the Outlook 2010 set up in Cached Exchange Mode isn't the best practice for an environment where the hdd space is a major constraint.
What do you suggest?
Thanks,

Is the Exchange server local or remote? If it's local then it might be worth considering disabling cached mode, since the traffic will be going over the local network and therefore having the data cached becomes much less useful. If it's a remote exchange
server then realistically turning off cached mode would likely make it unusable.
If Exchange is remote then other than increasing the available storage, another option might be to upgrade your Outlook / Office installation to 2013. In Outlook 2013 you can configure how much of the users mailbox is cached in terms of time, so for instance
you could set it to only cache the last 6 months worth of mail, and then all recent messages would continue to be quick to view, but older messages that are less likely to be accessed frequently would have to be downloaded from Exchange each time since they
would no longer be cached.

Similar Messages

How to deal with the rejected stock if it is rjected by QC

Dear All,
please let me know how to deal with the rejected stock from Quality point of view.i.e., for incoming materails and Finished if returned from customer
Regards,
P.Vijaya

hi
if material is rejected for incoming material then you can create Notification for incoming material due to you can return back material with print for that you have to record defects in result recording. in T-code QM02 if result is recorded with defects. or you can create with Qm01.against vendor
if material is returned from costumer you can create inspection lot for that for that you have to maintained inspection type 06 in material master. you can result record for that you can create notification for that. or rework for this material as per quality check or can scrap
if have any problem please come back
regards
Pravin

How to deal with the change in address of plant,

how to deal with the change in address of plant,companycode,sales org etc.?

Hi,
Do you want to change the address of Company code, Plant and Sales org?
Follow the menu path in SPRO.
SPRO >> Enterprise structure >> Definition >> Financial accounting >> Define Company code >> Edit company code >> Click on address and change.
.. Definition >> Sales and Distribution >> Define ...sales org >> select the sales org and click on address and change.
... Definition >> Logistics - general >> Plant >>>> Click on address and change.
Regards,
K Bharathi

How you deal with the situation if the vendor/supplier is also a customer ?

Dear All,
Could you please help me with the idea on how to deal with the suppliers/vendors who also are customers to you in MM?
Thanks in advance,
Ranjan

It depends what you are intentions are..
However
1. Create a customer master record for that vendor that is also a customer.
2. Enter Vendor number in Vendor field in control data-customer master record.
3. Enter customer number in Customer field in Control data- vendor master record
Finally, Check "Clrg with vend." field or "Clrg with cust." field

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

How to deal with the depth testing of Iterator Patch?

Recently I use Iterator Path to make my effect. I met some problem. I couldn't deal with the Sprite depth testing. I found it useless to set depth testing of the Sprite Patch. And also I don't know how to deal with the layer of the subpatch in Iterator.

rp0428 wrote:
All you can do is remove any reference to it:
myGame = null;If that was the last reference then it will be eligible for garbage collection and it MAY be collected.And note that there's rarely a good reason to do this. In most cases, simply letting things go out of scope when the method that uses them ends is sufficient. About the only time you need to explicitly set something to null like this is, for example, if you're implementing a collection class and you want to remove an entry.

How to deal with the light of picture??

how to deal with the light of picture?? it must be natural~~

You may have posted in the wrong forum. If you provide more information about exactly what it is you're trying to accomplish, someone can probably direct you to a relevant forum.

Organizational unit transfers ,how to deal with the person in it ?

Hi,All,I need your help!
if an organizational unit has been transfered to another upper organizational unit ,and there are already persons assigned to different positions of it,so how to deal with this problem?are those person's IT 0000,0001should be changed too?and how to maintain this kind of change?is a personnel action necessary?or there is some other more efficient way for it?

Hi
In IT0001 You have a Position which is linked to a Org unit. If you want to change the org units reporting relationship then you have to change it in OM by creating a new relationship with the upper org unit.
All the person are assigned to position so nothing needs to be done in PA.
Reward points if useful.
Regards

IMac SSD full - how to deal with the two drives

Greetings all,
I've been using an iMac i7 with two drives SSC and HDD. Recently, I've been having issues with the SSD being close to full. I use it for applications only, although some apps need lots of space (iTunes, iMovie, Photoshop, etc.) I use Lightroom and have all the images on the spinning drive. Does anyone know how to deal with this issue? Any way I can move the music from iTunes to the separate drive, or any way to figure out what exactly is using most of my space?
Thanks in advance for your help.
erlkonig

Here's some utilities for analyzing disk space:
DiskInventory
GrandPerspective
OmniDiskSweeper
WhatSize
You might want to consider putting your home directory on the HDD.
How to Move the Home Folder in OS X – and Why
Moving your home folder in OS X

How to deal with the barcode?

i'm developing a file storage system in java, there're two barcode on each file(one is pdf417, the other one is code128) , but now ,there's a problem confused me :
i use the barcode scanner to scan the file and get images of these files from the scanner , but i have no idea how to deal with these images,
i need the barcode information on the images, and i know there're some java components can help me to read the barcode from images , for example : BarcodeReader from Barcode Library, but these components were too expensive for me , is there any other way can solve this problem?

yes, look for a cheaper component...
Or write your own...
Or save up until you can afford the more expensive ones...

How to deal with the growing table?

Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?

junez wrote:
Every tables are growing in any applications. In some applications, tables become larger and larger quickly. How to deal with this problem?
I am developing an application system now. Should I add a lot of delete commands in the code for each table?Uh, well, yes if you continually add rows to a table the table will grow ... sooner or later you will want to delete rows that are no longer needed. What did you expect? You have to decide what the business rules are to determine when a row can be deleted, and make sure your design allows for such rows to be identified. This is called ..... analysis and design.

How to deal with the rule that do not use "object" class to declear a class

I run my flex project in sonar. And there is a rule "Do not use Object class ".
I just want to know how to deal with this problem.
I mean, when I try to write a base class, I don't know which kind of class will be transfered in by reference, which type I can declear instead of "object"?

Check out this example:
The moment I put in the code >> box1.addItem("hello"); << and run the application, the BusNameListener is fired. Hope this makes sense.
import java.awt.*;
import javax.swing.*;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
public class JFrameExample {
private JComboBox box1;
public JFrameExample() {
box1 = new JComboBox();
box1 .setMinimumSize(new Dimension(300, 24));
box1 .setPreferredSize(new Dimension(300, 24));
box1.addActionListener(new BusNameListener());
box1.addItem("hello");
JFrame f = new JFrame("This is a test");
f.setSize(400, 150);
Container content = f.getContentPane();
// content.setBackground(Color.white);
content.setLayout(new FlowLayout());
content.add(box1);
f.setVisible(true);
class BusNameListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
JComboBox cb = (JComboBox) e.getSource();
String item = (String) cb.getSelectedItem();
if (item != null) {
JOptionPane.showInputDialog(null,
"Specify...", "File Import",
JOptionPane.OK_CANCEL_OPTION);
}

How to deal with the product price difference g/l account

Hi:
When I went to the transaction fs10n to look at the g/l account 281500(gain from own product price differences) and I found there has 40 EUR in credit column,then the cumulative balance is credit 40 EUR,obviously this 40 EUR credit is due to the difference between order price and invoice price. My question is how to deal with it?

The Finance department needs to coordinate it with the Purchasing on the correct price. If the invoice price is the correct one, then there is a need to recognize the difference as per accounting standard. If in case that the order price is the correct one, they should inform the Vendor about it and once the Debit or Credit note is received, you just need to post it as "subsequent debit or credit" the amount will offset to this price difference.

How to deal with special character in source file

Hi experts,
i am doing a file to file scenario in which my source file contains many special characters when i am puting this file into moni its going with the special character .My source file is a fixed length file so in content conversion i have specified the file length but due to these special charcters these field lenght is also varing.So please guide me how to deal with these special characters in sender adapter
regards,
Saurabh

you could try using a Java Mapping to change the encoding manually. For that, set the encoding of the OutputFormat of the XML you'll serialize. Try the following code piece for the mapping (inside a try/catch declaration):
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = factory.newDocumentBuilder();
Document input = documentBuilder.parse(in);
OutputFormat format = new OutputFormat(XML, "ISO-8859-1", false);
XMLSerializer serializer = new XMLSerializer(out, format);
For more details check this guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42

How to deal with the using up space of /opt/oracle

Hello, all
We have an Oracle 10g preinstalled in a linux server (Rh 9). Now the system reports that the /opt/oracle is using up. The alert says:
Filesystem /opt/oracle has only 19% available space
Because I didn't install the Oracle dababase, I didn't have the chance to select a place for filesystem. Now the /opt/oracle is on the /dev/sda6 which is only 7.1G. I want to know what kind of information are stored here? Should it keep growing? Our database running on the Oracle is a small one, and it shouldn't occupy so much space. By the way, I scheduled the backup to disk (another hard disk) everyday. Is there any copy of the backup on /opt/oracle? How can I deal with it?
Any advice is highly appreciated!
Qian
Message was edited by:
QianChen
Message was edited by:
QianChen

Typically, the growth files on your binary directory is going to be in the $ORACLE_HOME/network/logs/listener.log , any tracelog, sqlnet.log, or any files that get accidentally dumped in $ORACLE_HOME/dbs.
I would check there first.
Also, try scanning for the last few files written/updated in the past 30 days.
#30 biggest files modified in last little while:
find . -xdev -type f -mtime -14 -exec ls -l {} \; | sort -nk 5,5 | tail -30

How to deal with the extremely big *.ost files in a Terminal Server environment which is running out of space

Similar Messages

Maybe you are looking for