How to debug a function module in a user exit
Hello out there,
I am calling a function module in the updates rules of an InfoCube.
The function module "hangs" while running the InfoPackage - the Monitor
shows up with "Missung Message . Update rules finished for InfoCube ...".
How can I debug an InfoPackage or this function module run
by the InfoPackage ?
Thank You !
Martin Sautter
Hi Martin,
well, the weblog is quite good, but for your purpose, just follow the beginning until processing stops in the code. Then, in the top menu choose Breakpoint->Breakpoint at->Function module. In the following popup enter the name of the fm close the popup and press F8. Processing will stop in the fm.
regards
Siggi
Similar Messages
-
How to DEBUG a function module running in background mode? Please help!
Hi Experts,
I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
TABLES
itab_std_format_inv = itab_std_format_inv
itab_snapshot_inv = itab_snapshot_inv.
COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
GopalHi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
lx_exit_loop(1) TYPE c.
lx_exit_loop = ' '.
DO.
IF ( lx_exit_loop = 'X' ).
EXIT.
ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards -
How to debug a function module using in the generic datasource?
Hi all,
We have created a generic data source using function modulle and have been extracting the data for a single customer it contains single records but it has pulled out more than 10,000 records. how to debug the function module used in the data source.
since we schedule for extraction in bi and back ground job gets triggered in ecc for extraction,
i know in se37 we can select the function module name and then debug but still need to check while the bacground job is trigered through bi.
ThanksYes you can debug the Function Module.
Open the function module in SE37 and put a break point in the code where you want to check from, then come to RSA3 and give the datasource name and check the Debug check box on this screen, once you click on the start button it will take you the place where you have placed the break point in the FM, by pressing F5 you can see the flow of the FM.
Let me know whether this solves your issue. -
How to debug a function module
hi,
Please Tell me how to debug an Function module
Thanks in advance
ajayHi,
In SE37 while executing the FM there is an option to execute the same in Debugging mode. If you want to debug the FM as a stand alone code you can make use of this functionality. Provide the necessary input values and run the FM in debugging mode.
If you intend to debug the FM from another program wherein it is called you can always set a breakpoint inside the FM and execute the code in the calling program. The control will stop for you at the point where you have set the break point inside the FM automatically.
Hope you have a clear picture now.
Reward if helpful. -
How to debug a function module that is written to extend a datasource
Hi all -
this is BW related question.
I have a datasource that I extended but instead of writing the code in the user exit, I created a function group and a function module to populate the custom fields. My problem is - I want to debug the function module and when I do that, I have to give datasource, infosource and update mode as input parameters. There is no data in the internal table C_T_DATA, how can I debug to get data into this table.
please let me know.
thanks,
Sabrina.Keep the Break point Before Updating.
just click on the table c_t_data .or choose the internal table and say CTRL+F4, you can internal table content
you can find change, append ,delete options.
just select the row and click append they one blank row will appear. just add entries to that , and enter
the record will be appended, do in the same way if you need more records to add...
regards
vijay -
How to debug mapping function module during delta extraction?
Hi experts,
Somehow our delta is not working properly, and i would like to debug our mapping function module. How can i debug it during a delta extraction?
Some info:
Our source system is CRM and our extractor is extracting one order document (contracts in this case). I know that when we modify a contract, a bdoc is generated and then passed throught the mapping function then the extracted data to the delta queue. I just need to debug when the bdoc is being mapped to see what's wrong with the extracted data.
Thanks in advance,
VanHi,
Since you are using a Function Module for the Extraction. Edit the Function Module and give "BREAK-POINT" before the loop command. Check and activate the Function Module.
Now Extract the datasource using RSA3. Now you can debug it. After checking remove the "BREAK-POINT" from the function module. Also Check and activate the same.
Regards
Jayaram M -
How to debug LAE function modules in ECC
Hi,
I've been trying to debug sequence of FMs called by LAE during asset creation in ECC. The asset is created for every service contract created in SAP CRM and then replicated to ECC system. While debugging the flow from CRM, I could debug upto ECC and then put external breakpoing in LAE FMs mentioned above but those FMs were not hit.
LAFA_ASSETS_CREATE_ON_LEASE
LAFA_ASSETS_CREATE
LAFA_ASSET_CREATE
LAFA_ASSETS_RETIRED_GET
Could anybody help me debugging these FMs?
Regards,
RaviHi Ravi,
this process works asynchonous. This means from CRM some entries are stored in LAE_CRM* tables with function module FILA_BUS_TRANSACTION_RECEVIE. A triggered function picks up the entreis and process them. This function runs through your mentioned function modules.
In a test system, you can call transaction FILATEST and copy the contract sent from CRM and using the simulation or execution function. This will bring you to these function modules.
Kind regards,
Steve
Edited by: Steve Trester on Mar 1, 2011 8:13 AM -
How to debug LAE function modules
Hi FI Expert,
I've been trying to debug sequence of FMs called by LAE during asset creation.
LAFA_ASSETS_CREATE_ON_LEASE
LAFA_ASSETS_CREATE
LAFA_ASSET_CREATE
LAFA_ASSETS_RETIRED_GET
The asset is created for every service contract created in SAP CRM and then replicated to ECC system . While debugging the flow, I could debug upto ECC and then put external breakpoing in LAE FMs mentioned above but those FMs were not hit.
Could anybody help me debugging these FMs?
Regards,
RaviHi Ravi,
this process works asynchonous. This means from CRM some entries are stored in LAE_CRM* tables with function module FILA_BUS_TRANSACTION_RECEVIE. A triggered function picks up the entreis and process them. This function runs through your mentioned function modules.
In a test system, you can call transaction FILATEST and copy the contract sent from CRM and using the simulation or execution function. This will bring you to these function modules.
Kind regards,
Steve -
Hi,
Could you please tell me how to debug the function module.
Thanks,
Subha.In SE37 while executing the FM there is an option to execute the same in Debugging mode. If you want to debug the FM as a stand alone code you can make use of this functionality. Provide the necessary input values and run the FM in debugging mode.
If you intend to debug the FM from another program wherein it is called you can always set a breakpoint inside the FM and execute the code in the calling program. The control will stop for you at the point where you have set the break point inside the FM automatically.
check this link also
http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801f36454211d189710000e8322d00/content.htm -
Function Module for search help Exit
How to create a function Module for search help exits?
please explain in details with step by step process.Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
exporting
dyname = sy-cprog
dynumb = sy-dynnr
translate_to_upper = 'X'
tables
dynpfields = dynfields
exceptions
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
others = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
importing
output = p_vbeln.
select posnr matnr arktx into table help_item
from vbap
where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'POSNR'
dynprofield = 'P_POSNR'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you************* -
How to open include ZX... of User exit.?
Hi experts,
Please help me how to open an include zxvvfu01 of Function module "EXIT_SAPLV60B_001" of User exit "SDVFX001"
I want to change some code in include Zxvvfu01 but I open transaction SE37 and enter "EXIT_SAPLV60B_001" and then double click on Zxvvfu01 but the message is "Program names ZX... are reserved for includes of exit function groups"
Thank you so much.
abaperHi,
As suggested by expert is absolutly correct.
Just try t.code cmod -.> project name -> component -> display -> double click on function exit -> incude -> double click.
It should work.
Regards,
Anand Mehrotra. -
How can I debug a Function Module used by smartforms
Hello everyone,
i have a problem with the function module /1BCDWB/SF00000040.
It's a module executed from a smartforms form. I need to debug this
function module while printing an invoice. While printing it should jump
to the place of the function module.
Would be grateful if someone could help me.
Best regards
F. HoppeThis is exactly what i have done last time.
The problem is that the breakpoint does not stay at the same place
when i activate it in the module itself.
Isn't there a transaction you can put breakpoints specific to a FM? -
How to debug IDOC_OUTPUT_DESADV01 function customer exist
Hi,
I have requirment to add some logic on LVED2FZZ exit, I have added the logic but it is not working as expected.
I have put the break points in IDOC_OUTPUT_DESADV01 function module PERFORM SEGMENTS_FILL -> PERFORM SEND_SEGMENT_E1EDK07_DESADV -> PERFORM USEREXIT_E1EDK07 and triggered the output type from VL02N transaction, But program is not stopped at break points. I want analyze how data is popluting in segments urgently.
Please provide the step by step approach to debug IDOC_OUTPUT_DESADV01 function module from VL02N output type triggering.
Thanks,
RajHi,
Put a break point in the required part of the User exit. Before saving the data in VL02N, activate debugging by '/h'.
When the Debugging screen appears, select the menu option, "Settings -> Update Debugging". System will give the message
"Update debugging turned on" in the status bar. Proceed with executing the Tcode by pressing F8. System will
pause the execution on the place where you have created the break point.
Regards
Vinod -
Hw to debug outbound function module
Hi,
I know how to debug inbound idoc using WE19 can sum1 tell how can i debug outbound function module.
i want to debug to see as to why certain segments are not being updated in IDOC PORDCR1.PORDCR102.
even though i put an external break-point it does't trigger .
Regards,
Jayaram Maganti>
JAYARAM MAGANTI wrote:
> Hi,
>
> I know how to debug inbound idoc using WE19 can sum1 tell how can i debug outbound function module.
> i want to debug to see as to why certain segments are not being updated in IDOC PORDCR1.PORDCR102.
> even though i put an external break-point it does't trigger .
>
>
> Regards,
> Jayaram Maganti
Hi
See this link this is helpful for you.[debug outbound function module|Re: Cannot debug outbound queue; -
Debugging outbound function module
Hi,
I am trying to create or save sales order(va01). I am using ZWIP as the output type and transmitting the details to 3rd party system using idoc. Now Once I save, I could see the out bound idoc being generated. But when I put the break-point in the underlying function module, the process is not stopping there. I want to debug that function module. But all the time the idoc has been generated without stopping at the break-point.
How do I debug the function module for the outbound idoc?
Any ideas would be appreciated.
Thanks
SachinHI,
Before saving, put '\h' incommand line and press enter, it will go into debugging then goto settings then update debugging. Then you can press F8 to go the break-point you have create before FM.
Reg,
Sachin
Maybe you are looking for
-
How do i create and save a genius playlist in iTunes 12?
I can see my genius playlists from older versions of iTunes but I can't figure out how to make a new one!
-
XML document conversion to Plain document in XI using JMS Adapter?
Hi, We are trying to send an soap based XML document from ECC to MQSeries 6.0 using PI 7.0. I created receiver communicaiton channel to MQ with the below modules 1. AF_Modules/MessageTransformBean - Module Key XML2Plain 2. SAP XI JMS Adapter/ConvertM
-
Machine doesn't handle Mavericks with current setup, but does with fresh setup
I have a MacBook Pro 2.4Ghz Intel Core i7 with 8 GB Ram and when I upgraded to Mavericks my machine began to crawl. The biggest thing I noticed is Mail would take about 10minutes to launch and daily my machine would tell me I've used up all memory an
-
Hierarchy display Sort Order setting "As in hierarchy" in BEx not working.
Hi Team, We are using SAP BW 7.0 In a Query the property for Sort Oder of Hierarchy is set as "As in the hierarchy" for WBS_ELEMT. Example data as per R3: HierarchyID hierarchyDescription 4 Four 2 Two 1 One 3 Three 5 F
-
OS X 10.8.4 Window move issue?
Hi, I am running 2012 Macbook Air 1.7GHz Intel Core i5 128GB 10.8.4 and everytime I click on a window top bar and move it, if i click else where on the screen the window moves to where the mouse was clicked. At first I thought it was the app Cinch th