How to debug badi in web UI?

Hi!!
How to I debug a newly created badi in web UI?
I have created badi ZCRM_BP_UIU_VIEW_CONFIG. Filter condition is
CLEAR_HEAD/CasePopupCaseEF = VIEW_ID
The Idea is that not all user can create cleansing cases with Accounts from ECC.
I set break-points in BADI method, I searched for Accounts, then I activated break-points in BSP_WD_CMPWB and after this I create the cleansing case. There is a general break-point poping up, but no break-point related to my BADI.
I am new to Badi in Web UI and I do not have any clu how to do the debugging. Maybe the badi is wrong, maybe I do not debug correctly.
Thanks for your help!!
Cristina

Hi Cristina,
Set an external break-point. In menu there are 2 buttons to debug. Click on the right side button.
Hope this helps.
Caíque Escaler

Similar Messages

How to debug BADI BBP_SAPXML1_OUT_BADI during PO Creation and change

Hi All,
I have a scenario in which i need to send some additional fields with the PO data to the XI via PROXY .
To do this i have enhanced the proxy structure with additional fields and For mapping these fields, I created an implementation of method PURCHASEORDER of BAdI BBP_SAPXML1_OUT_BADI with filter PO ( Purchase orders ).
But this implementation is not getting processed.
Whenever Po is created the XI will receive the data but the additional fields are not available in XI.
To check the code i need to debug the badi implementation .
Can anybody please tell me why this badi is not triggered and how to debug the badi code.
Its urgebt .
Thanks in Advance.
Regards,
Naresh

Hi Naresh,
Go to your BADI Implementation set infinite loop in the method. Run the transaction SPPFP & set Promotion status to 0 & Processing Type as MET & execute it, Select the PO you want to debug & press F8. Goto sm50 to debug the BADI.
Thanks

How to Debug - Badi BBP_SAPXML1_IN_BADI

Hello Experts,
Could you please guide me that how to debug this badi - BBP_SAPXML1_IN_BADI.
Will this badi works for Schedule agreement release?
Thanks in advance.
Aakash

you have to use the transaction sxi_support to debug the inbound xml document.
get the xml document , insert the payload , use /h for debugging , place the breakpoint and execute.

SRM - Shopping Cart - how to debug BADI BBP_CREATE_BE_RS_NEW in ECC system

Hi,
We are using BADI BBP_CREATE_BE_RS_NEW (ECC system).
We put external breakpoint on this BADI. Made sure also that the BADI is activated.
Our problem is it didnu2019t stop on our breakpoint. Authorizations to debug/etc are there.
When it was not possible to debug when shopping cart is created in internet link (SRM), we used tcode BBPSC01 (ECC system) to see if we can go to the BADI and debug it. However still the program did not stop at break point at the ECC side.
(SRM Module shopping cart)
How do we debug this BADI in ECC? Anything to set up or ?????
SRM_SERVER 550 0013 SAPKIBKT13 SRM_SERVER 550: Add-on installation
SRM add on to ECC 6.0
Looking forward to hearing from you as soon as possible.
Thanks.

Hello,
User calling BAdI in ECC must be a dialog one in order to be able to debug with.
Check whom user is called in R/3 by having a look at RFC transactional assigned to your R/3 backend in SRM SM59 transaction.
Then, in R/3, modify this user as a dialog one (type 'B') then put an external break-point for this user.
Regards.
Laurent

How to debug the IC Web client?

I have requirement to debug the contact serach in the IC. When a user search by entering the first name and last name, It does not pull a single record. Actually there is lots of records are in the system. If I enter a letter with wild card, it pulls the relevant records of first name and last name. I want to debug the code behind the interaction center. Your reply is highly appreciated.

I am closing this question as there is no response.

How can I debug BADI BBP_CREATE_BE_PO_NEW ??

Hello experts,
how can I debug BADI BBP_CREATE_BE_PO_NEW to find out what goes wrong with my coding?
I set breakpoint for external Web-user. I also set session breakpoints and resent the shopping cart using FM BBP_PD_SC_TRANSFER. The BADI is never debugged.
We use SRM 6.0 with classic scenario.
Any useful ideas?
Joe

Hi,
You can put an endless loop in your BADI BBP_CREATE_BE_PO_NEW ,as shown below and force the program to stop there. Now go to SM50 and switch to debug mode for the program and start debugging(take process that keeps hangs in your endless loop).
Data: l_check.
do.
if l_check eq 'X'.
exit.
endif.
enddo.
BR,
Disha.
DO reward points for useful answers.

How to debug web app with weblogic?

I wrote a web app that includes jsp files and some javabeans, then I put the jsp files to directory
mydomain\applications\DefaultWebApp
then I complied javabeans and put those classes to
mydomain\applications\DefaultWebApp\WEB-INF\classes
Then I start the weblogic,it runs very well.
I modified some javabean, complie them and put classes override the old classes,
but the web app can not find the new classes.
Any one know How to debug web app(with javabeans) in weblogic?
thanks!

how to config the hot deploy?
thxSorry, for this delay in responding. I had set notify me with email option in Watch This topic; but I never did get any email notification.
I use wls6.1; I think the process may be very similar to this in wls8.x. In wls6.1 (sp5), this is done via the -
Dweblogic.ProductionModeEnabled=False or
Dweblogic.ProductionModeEnabled=True
in the startup cmd/sh script. Out of the box, wls6.1 is set to Dweblogic.ProductionModeEnabled=False which automatically enables hot deploys.

How to debug ABAP Web services from Microsoft Visual Studio

When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

Hello WilliamIV,
>>How can I "configure" Visual Studio debugger to allow validation to work?
Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
If I misunderstood this issue, please feel free to let me know.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to debug a report in webi

Hi Every One,
1) How to debug (debuging steps )in a report in boxir2 webi based report.can any body help me out .
2)How we do the performance and tuning in the report level.
3)Aggregate awareness is possible to apply in report level or in universe level.If possible where we can find that option in webi..
Please help me out
Thanks in advance

Hi,
1. Depends on what you would like to debug - Always remember that Data issues - look into generated SQL and compare with report output ..the values would be the same or at higher level based on output context.
2. There is not much to do in terms of improving performance in rendering a report. You should ideally concentrate on universe and underlying db performance for query retrieval.
3. Aggregate awareness is applied at the Universe level. Please refer to the universe designer guide for more details.
Regards

How to debug the BADI - BBP_CREATE_BE_RQ_NEW

Hi Experts,
Help me how to debug the BADI in order to validate my coding.
I have put a break point in the BADI and run the class CL_BBP_SC_TRANSFER_CLASSIC Instance DO by giving the SC no and the GUID but still the BADI is not getting triggered.
Suggest me any other way to debug the BADI.
Regards
Paul

Hi,
You can put an endless loop in your BADI BBP_CREATE_BE_RQ_NEW ,as shown below and force the program to stop there. Now go to SM50 and switch to debug mode for the program and start debugging(take process that keeps hangs in your endless loop).
Data: l_flag.
do.
if l_flag eq 'X'.
exit.
endif.
enddo.
BR,
Disha.
DO reward points for useful answers.

How to debug program or Badi in SRM 7.0 through PORTAL

Hi friends,
        My question is How to debug a Badi or any program in SRM 7.0 through PORTAL . I putted External break point in Badi and following settings has been done in Utilities u2013 Settings u2013 Abap Editor
Front-End Editor (new) - checked
In debugging tab
Users - maintained (entered same user name using in Portal as log on user name)
IP Matching u2013 checked
ABAP Debugger u2013 New debugger u2013 checked
Session breakpoint active immed. - Chcecked
I am not able to debug this badi through Portal and some time after I am getting Time out error whereas Time limit is extended up to 600 seconds . In SRM 5.0 it is working fine .I have SAP ALL authorization   if any other procedure is available or for that any specific role needed then please share with me.
Regards,
Abhijeet
Edited by: abhijeet panse on Jun 29, 2010 8:02 AM

Hi ,
         Thanks Iftekhar and Yramki for replying. I checked everything and we have only one server for Development but still I am not able to debug, I checked AL08, it is showing same server we donu2019t have different application server for development. I donu2019t have any idea about that How to activate debugger for specific user id, please suggest me.
         Parameter set with value rdisp/tpda_for_ext = 1 . In the BADI i putted one infinite loop and then try to debug from the SM50 through Menu program/session u2013 Program u2013 Debugging but from GUI new debugger session is not opening and some time after process has been deleted from the SM50 and I got error message in the Portal.
         Do I need or missing some setting in Portal . Please suggest me.
Regards,
Abhijeet

How To: Debug missing Drivers in MDT

The definitive post on missing drivers in MDT (most comprehensive list I've done so far)…
Please to NOT post questions from this thread, instead create a new thread.
How to debug Network Driver Problems
One of the earliest hurdles an MDT administrator will come across is the management of device drivers, specifically networking drivers. With most other drivers, like Audio, printer, and video drivers, a quick call to Windows Update or install over the network
will resolve the Installation. However unless the Network (and storage) Drivers are installed into Windows from the start, it will be much more difficult to install the rest of the system.
This post should help you get started if you find a machine that did not install a device driver properly, and you want to know how to find and import the correct drivers.
Installing network drivers in the
full OS
Step 1 - Try network connection again
It's possible that you might get a DHCP error from MDT, but when you try again later to connect the Deployment Share it works! This may be caused by a slow or malfunctioning DHCP server in your network. Re-check your DHCP servers, ensure that PortFast is enabled
on your routers. If all else fails get your network administrators to document the DHCP delay. A long delay in modern networks is unnecessary.
Step 2 - Verify connectivity
You may not have a driver problem but a network problem. Check the physical connection on the computer (Network installs on MDT *REQUIRE* a wired network connection, no Wi-Fi). Open a web browser. Check the IP Address (ipconfig.exe /all). Ping the Deployment
Server, manually connect to the Deployment Share. IF you can't connect to the Deployment Share, neither can MDT.
Step 3 - Find the Correct Driver Package
Before you load the driver into MDT, first verify that you have the correct driver. There are scenarios where you may *think* you have the correct driver, but the driver will never run because the package is designed for a different OS/SKU/Platform/whatever.
Install the driver package by:
  ○ Open the Device Manager (devmgmt.msc).
  ○ Find the network device in the list (ensure this is the wired device, not the wireless device)
  ○ Right click on "Properties" and click on the "Details" tab.
  ○ From the "Details" tab, select the property "Hardware Ids" select all the values, and copy to the clipboard, it would be a good idea to save for later. Should look something like:
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA&REV_04
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA
      PCI\VEN_8086&DEV_1502&CC_020000
      PCI\VEN_8086&DEV_1502&CC_0200
  ○ From the "Driver" tab, click on "Update Driver…", click on "Browse my computer for driver software" locate the driver package on the local machine or USB Drive, and install the package.
  ○ You should get a confirmation that the driver package was installed.
  ○ IF you do not get confirmation, MDT driver installation may not work.
Windows will install the driver starting with the *.inf install package, and will typically include a *.sys (binary) and a *.cat (digital Signature). If the driver package has been re-packaged into a *.cab, *.zip, or other compressed *.exe file, the
package must be extracted first. This is a hard requirement for any driver used by MDT and/or SCCM. All driver packages that are signed by Microsoft (WHQL) will be installed from the *.inf file, and you should only use devices that have the Microsoft WHQL
Logo as a sign of quality.
If you need a help on where to find driver packages for your devices, the 3 largest Computer OEM manufacturers supply drivers grouped by Make and Model that are easily imported into MDT and SCCM. See:
http://deploymentbunny.com/2014/07/08/back-to-basicwhere-to-find-drivers-for-servers-and-clients/
Step 4 - Load driver into MDT
If you have more than 20 driver packages, or if you anticipate you will have more than 20 drivers, you should start grouping your drivers in sub-folders for organization. One popular method is to group by Computer Make and Model. Ensure that you are using the
correct Driver Selection Profile in your task sequence. If you are unsure, disable any selection profile(s) to ensure the driver is installed correctly.
Step 5 - Run the full MDT installation
During installation MDT will perform the following:
  ○ Run the PNPEnum.exe utility and capture output to PnPEnum.xml. The VEN_Xxxx and DEV_Yyyy from the "HardwareIDs" property above must be present in this list. Otherwise we won't have a match.
  ○ Search through the %DeployRoot%\control\drivers.xml file looking for a match for the HardwareID. MDT may filter the search based on the folder search type.
  ○ MDT will copy each matching driver to the local c:\drivers directory using the xcopy.exe command. You can search (grep) for the string "xcopy" in the ZTIDrivers.log file, that will get you list of all driver packages matched by MDT.
  ○ MDT will allow the machine to boot into the NEW OS, and Driver Installation will begin in the OS. IF there are multiple drivers found and copied locally, the Windows (not MDT) will determine the best one. The c:\windows\inf\SetupAPI.*.log files
will detail which drivers copied locally were installed (or *not* installed).
Installing Network Drivers in
WinPE
Step 6 - Try the network connection again
(See above
Step 7 - Verify Connectivity from within WinPE
Verifying network connectivity will be a bit more difficult in WinPE, since we have a limited User Interface, so all investigation must be done in the debugging mode (Press F8) cmd.exe
  ○ Try connecting to the Deployment Share:
  c:\> net use * \\MDT\DeploymentShare$ /u:UserDomain\UserName *
  ○ Try pinging the Deployment Server:
  c:\> Ping.exe MDT.Corp.contoso.com
  ○ Verify that you have an IP address ( ipconfig /all ) If you have an AutoConfiguration address - Driver OK - WinPE can't reach the DHCP server. If you have "Media Disconnected" - Driver OK - Physical adapter not plugged to network. If
no devices are listed - Driver bad - Driver not installed.
  ○ Check the x:\windows\system32\WpeInit.log - This log will show the network driver (if found) being installed.
Step 8 - Verify driver packages are getting included into WinPE
Firstly, verify the correct driver package from within the full OS above. By default MDT will import *all* Storage and Networking drivers into your WinPE image. However it is possible to change the subset of files copied via "Selection Profile" or
other method. Cross check your WinPE Driver Settings.
  ○ From within the MDT console, right click on the root of your Deployment Share and select properties.
  ○ Click on the "Windows PE" tab, and the "Drivers and Patches" sub tab for both x86 and x64.
  ○ Your Network Drivers package must be in the "Selection Profile" if enabled.
Finally verify that the correct Network Driver package is being copied to WinPE. If necessary this may include setting up a debugger to watch the MDT Provider build the WinPE Image from scratch. My preference is to use the SysInternals
http://live.sysinternals.com/Dbgview.exe tool.
  ○ Open up the MDT console.
  ○ Download and run the DbgView.exe tool.
  ○ Update the deployment share in question.
  ○ The DbgView tool should show what drivers were copied to each WinPE Image.
Other
Whenever you add a driver into the MDT console, you must update the deployment share for that drivers to be added to your WinPE Image. If you are unsure, select "Completely regenerate the boot images." to ensure the drivers is imported. Additionally,
you must copy the updated LitetouchPE_x??.wim and *.iso files to the other consumers of the WinPE image like WDS/PXE and or any USB offline media.
Note that some Broadcom NetXtreme class of drivers have a multi-function driver architecture that may have difficulty loading in WinPE. Ensure that you load the "RIS" class of drivers from Broadcom in your MDT environment.
Note that by default MDT does *NOT* support the installation of Windows over Wireless network devices (Wi-Fi). The MDT installation sources must either be available through wired networking, or offline (USB Flash) media.
This post does not discuss origination of drivers within MDT ( Chaos vs. Total Control ), that is a different topic.
http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
Further Help
If you are still having problems with drivers in via MDT, ask the experts in the MDT Technet Forum:
Include a short description of the problem. Including the Make/Mode if necessary.
Include the HardwareIDs from the Device Manager (Devmgmt.msc) into the post (from above).
Copy your known good driver package (step 3 above) to OneDrive.
Copy the following log files to a public site like OneDrive and include the link:
  ○ PnpEnum.xml (from Client)
  ○ Bdd.log (From Client) - or at least the ZTIDrivers.log file.
  ○ c:\windows\inf\SetupAPI.*.log (from client)
  ○ %DeployRoot%\control\Driver*.xml
  ○ %DeployRoot%\control\SelectionProfile*.xml
  ○ %DeployRoot%\control\settings.xml (if problems in WinPE)
  ○ x:\windows\System32\WpeInit.log (if problems in WinPE)
  ○ If the MDT server is not including your driver package in WinPE include the DBGView log.
This post is by Keith Garner - Keith was a developer on the MDT team where he developed the ZTIDrivers.wsf script, he also worked for the Windows Hardware Quality Labs as a technical PM on Driver Quality, and developed samples for the
Microsoft Device Driver Kit (DDK) specifically around the area of Device Driver installation in the OS (Windows NT 5.0, 2000 and Windows XP). (So yes, I know drivers :^).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

OK. I have redone the drivers for WinPE which has reduced the image size by about 200MB. Unfortunately the problem persists.
Is there anyway to turn on some sort of boot logging so I can see what driver it is failing on?
I am also still seeing the weird behavior of it working over PXE but blue screens when booting from USB. Can anyone explain that?
JJ

[Enhancement in BW]: How to use BaDI : RSU5_SAPI_BADI

Hi Everybody,
Right now, could you kindly please tell me how to i use customer exit but using BADI, particularly for BADI : RSU5_SAPI_BADI.
<b>I just wanna use the customer exit on variable (variable user-exit).</b>
So far i've tried these steps (might you correct me/advise):
1. tcode : SE18
2. Enter the Badi Name : RSU5_SAPI_BADI
3. (Toolbar) enhancement implementation -> Create
4. ... (After that i don't know what i've to do ..)
Could you tell me step-by-step to make it ?
Such as what i should fill-in for Implementation Name and any parameter should i fill in there and how to debug it ???
Many-many thanks all for the attention.
Hopefully i can make it :).
Kind regards,
Niel.

Check out this link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7</a>

SPNego - Windows integrated Single-Sign On not working - How to debug?

Dear board,
I've tried to configure SPNego - Windows Integrated SSO with no sucess yet. We do use SAP EP7 on Windows Server 2003 64bit with MS AD 2003. The following is done:
- Service Account is created, authentication works when done on pupose
- SPNego wizard completed sucessfully, WebAs Java restarted
- IE6: Windows integrated Logon is activated, IE shows Intranet when accessing the portal url ( I can't modify the IE Security Settings yet, but as we do use KERBEROS outside of SAP as well, my assumption was settings are fine)
- UID in windows, EP and ECC are equal
When I access the portal URL, I am prompted for used id and password. How can I trace methodically what is wrong? Some kind of checklist with links, url or SAP Notes would be great. I've also read references to a test application as well as some diag / trace tool.
Please post thoroughly as I am rather new to this topic and still missing important terms and knowledge.
Kind regards and thanks in advance,
Richard

Dear board,
after the service principal name registration was done (once again maybe) the error message disappeared in the SPNego wizard when I retrieve the Principal in Step 2, the test resolution works as before in step 3 of the wizard.
At the moment, the error message in the central log file is still unchanged. Acquiring crendetials for realm xxx.xxx.org failed, no valid credentials provided.
#1.5 #001A4BAF485A0079000000040000207000043C8446E8BA7E#1192438730203#com.sap.engine.services.security.authentication.logincontext#sap.com/irj#com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0####d8ce7ab07afc11dc8d93001a4baf485a#Thread[Thread-307,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Security/Authentication#Plain###LOGIN.FAILED
User: N/A
Authentication Stack: com.sun.security.jgss.accept
Login Module Flag Initialize Login Commit Abort Details
1. com.sun.security.auth.module.Krb5LoginModule OPTIONAL ok exception false null#
#1.5 #001A4BAF485A00580000007F0000207000043C8446E8C109#1192438730203#com.sap.engine.services.security.authentication.loginmodule.spnego.SPNegoLoginModule#sap.com/irj#com.sap.engine.services.security.authentication.loginmodule.spnego.SPNegoLoginModule#J2EE_GUEST#0####d8ce7ab17afc11dc8f50001a4baf485a#SAPEngine_Application_Thread[impl:3]_29##0#0#Error##Java###Acquiring credentials for realm XXX.XXX.ORG failed
[EXCEPTION]
#1#GSSException: No valid credentials provided (Mechanism level: Attempt to obtain new ACCEPT credentials failed!)
Any ideas? I haven't used the diag tool yet, is there any other reasonable way how to debug the setup?
Kind regards and many thanks,
Richard

How to debug sharepoint 2013 provider hosted app?

We developed SharePoint 2013 provider hosted app using MVC 5 Entity Framework of Database first and publish in Windows Azure site as well as deployed that project to our SharePoint app Catalog. We need to change Windows azure site so we
changed to publish in another Windows Azure site and deployed again to our SharePoint app Catalog. No problem the app is working after we changed Windows Azure site. I am new of this technology I faced so hard of changed
existing Windows Azure site to New Windows Azure site. Please tell me how to debug the SharePoint Provider hosted app? Please tell me step by step process.
Thanks in Advance.

Hi,
According to your description, you might want to know how to debug provider hosted app.
To get a quick start, I would suggest you take a look at the link below about
Debugging SharePoint Apps That Are Hosted In Windows Azure Web Sites:
http://blogs.technet.com/b/speschka/archive/2013/11/25/debugging-sharepoint-apps-that-are-hosted-in-windows-azure-web-sites.aspx
Another two similar articles for your reference:
http://sharepointfieldnotes.blogspot.jp/2013/03/making-it-easy-to-develop-and-debug.html
http://blogs.msdn.com/b/officeapps/archive/2013/01/03/debugging-remote-event-receivers-with-visual-studio.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to debug badi in web UI?

Similar Messages

Maybe you are looking for