How to debug i_step=0 Bex Variable (Customer Exit)

Hi all,
can anyone please help me regarding following problem:
I have a variable (customer exit) in a query. This is for hierarchy authorization.
This variable is mentioned in my analysis authorization (Infoobject 0COSTCENTER).
Now i want to debug the coding when execute the query in TA RSRT.
But when i set a break-point. The i_step starts with 1. I want to debug
the coding when the i_step is 0 !!!! Any idea?
Best regards,
Frank

Here a break solution:
only for develop system-
you can set this code at start of the include:
DATA: flag TYPE c.
WHILE flag IS INITIAL.
ENDWHILE.
let start the query, then go to SM50 and take in debugging the process in loop. (Programe/mode-program-debugging).
Pay attention leave the code immediately after that.

Similar Messages

BEx Variables - Customer Exit - Find Max and Min of two values

Hi Experts, I have two ID's at any given time in my InfoProvider. I'm trying to create two user exit variable on this ID. One should return the max of the two and the other should return only available one (i.e. the Min). The variable should not prompt the user for any value. Any time the variable is used in the report. max should the max of the two ID's and the Min should show the lower of the two values.
I would appreciate if somebody could provide the code that I can use.

you could use below:
Variable for Max
SELECT MAX ( ID Field )
FROM <Source>
INTO <wa_id>.
Variable for Min
SELECT MIN ( ID Field )
FROM <Source>
INTO <wa_id>.

Do we write variable customer exits for virtual key figures in Bex?

Hi all,
Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
Thanks,
JB

Nevermind

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

Exclude in variable customer exit

Hello,
Can you help me solve problem with exclude in variable customer exit? I have z-table with name of variable and values. Primary I need save multiple values with exclude. I was tried this code:
if i_step eq 2.
select * from zbwsd_01 into table i_t_var
     where vname = i_vnam.
l_subrc = sy-subrc.
else.
l_subrc = 4.
endif.
if l_subrc = 0.
loop at i_t_var.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = i_t_var-value.
    L_S_RANGE-SIGN = 'E'.
    L_S_RANGE-OPT = 'EQ'.
    APPEND L_S_RANGE TO E_T_RANGE.
endloop.
else.
I have NW2004s. Have you some idea?
Thanks a lot
Jiri

Exclude is ok, if I use variable type Selection option. For type Multiple value this is not valid

Problem in the variable customer exit in the query jump target

Hi developers,
we have problem because we have created a variable time on 0CALDAY who is mapped in the cube of the stock with posting date.We launch the query for example with range 01/8/2005 31/8/2005 and the resul is OK.
Then we jump on the other query where the users wish see the result of the posting date for the period 01/8/2005 31/8/2005 For resolved this problem we have created a variable customer exit for the characteristic 0Postingdate and have inserted the code in user exit variable:
WHEN 'ZV_CEREG'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
             WHERE vnam = 'Z_DAT_AN'.
        CLEAR l_s_range.
        CLEAR datastock.
        l_s_range-low = loc_var_range-low.
        l_s_range-high = loc_var_range-high.
        l_s_range-sign = loc_var_range-sign.
        l_s_range-opt = loc_var_range-opt.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
When we effectued the jump the our objective is transfer the date inserted by user in the variable of the query sender 'Z_DAT_AN' to the variable of the query receveir 'ZV_CEREG'.
This step it does not work correctly, this why are different query?
You can help me for resolved this problem!!
Thanks Domenico

Hi,
I think, this approach does not work. Because customer exit will be finished before displaying the result set of 1st report. So the assignment to VAR2 from VAR1 does not execute then after.
I hope, In RSBBS,after assigning receiver, in the assignment details,select 'Variable' for 'Type' of 'infoobject' 0calday.And select '0Postingdate' for 'fieldname' and select 'selection options' for selection type.
Take help.sap.com help for further information.
With rgds,
Anil Kumar Sharma. P
Message was edited by: Anil Kumar Sharma

RSBBS - create a variable customer exit based on initial selection

Dear all,
I am using RSBBS (RRI) to jump from one query specific cell to another query. The destination query gets the parameters from the selected cell. In order to achieve this, the only thing we have done was to insert the relevant characteristics as Free Characteristics on the destination query (no variables were required).
Now, I need to add a new variable on my destination query. This variable should be a customer exist based on one of the paramenters that the destination query gets from the original query. How do I get this value to use it in the variable customer exit???
Thanks in advance

Thanks for your reply,
I got it in a different but not tottally different way from wthat you suggested.
I have created a variable () (ready for imput) for my characteristic. However, on transaction RSBBS, when defining the target query, I went to "Assigment Details" option and for my characteristic, I have changed the type form "generically" to "variable" and choosed the field name of the variable ().
In this way the target report gets the original report definition for this characteristic as a variable that I can then use on my costumer exit.
I have tryed and worked...brilliant!

Text Variable(Customer Exit) displays variable name instead of its value.

Hi Gurus,
My requirement is to display the year(from variable) as the field name i.e Year end salary 2009.
I was using the fields name as hardcoded values like 2009 but as per my requirement i need to display it from the variable.
I tried using Text Variable using customer exit, but I'm getting variable name(zvariable) instead of value(2009).
Please help me out, many thanks in advance.
Regards,
Ankur

Hi,
Actually I tried to create a Text Variable with Replacement Path.
But here the problem is that we have a Characteristic Variable (Customer Exit) which is not listing in the selection box of Replacement Path.
Hence we tried to create another Text Variable (Customer Exit) and refering to the same Customer Exit code.
Regards,
Ankur

How to debug start routine for the custom code?

Hi Experts,
Can anybody tell me how to debug the start routine? Also could you please guide me where to write the custom code in the start routine.
Thanks in advance.
Sharat.

Rajkumar,
Thank you for your help. but the blog link that you send it to me does not mention anything about ABAP debugger screen.
What should I do once I get in to the ABAP debugger? the link only tells how to get to the ABAP debugger that I know.
Also it say that I have to use the infinite loop to debugg the start routine.
Can anybody tell me how to debugg start routine with the scren shots please. I don't know how to use infinite loop in the start routine. Is their any easy process step by step to see my particular record behavior in the start routine?
I will assing you the points. again thank you.

How to find out query name in customer exit for variables

We use the same customer exit variable in different queries. In the customer exit we want to find out, which query has called the customer exit. With the technical query name we want to read a master data table entry.
e.g. If we come from query ZG1_TEST1 we want to use selection sel1
Query name | selection
ZG1_TEST1 | sel1
ZG1_TEST2 | sel2
How can we find out the query name in the customer exit for variables?
Thanks for your help,
Evi

Hi Evi,
check out the structure I_S_RKB1D in your exit. It contains the query.
Siggi

BW Variable Customer Exit I_STEP 3

Can anyone tell me under what circumstances I_STEP 3 is called to validate a variable input.
Thank you,
Beat

Let me try to explain you with an example
I have the following scenario our fiscal period starts in Oct so it is 001.2005.
So if a user runs a report in period 003.2005 the report must report for the periods 001.2005, 002.2005 & 003.2005.
If the user reports in 005.2005 the report must report for the period 004.2005 and 005.2005 which is the second fiscal quarter. Similarly, if the user reports for period 011.2005 it must report for the periods 010.2005 & 011.2005 which is the fourth fiscal quarter.
Now in order to do this task i used variable exits
First create a variable of type customer exit and write the code in Program(Include) ZXRSRU01.
Code looks like this.
In the code try to put this logic
dat1 = fisc period u supplied (say 3.2005)
dat2 = dat1+4(2) " i.e 3
like this for four querters u have to define and supply the values dat3 and dat1 in low and high selections.
WHEN 'ZE_CALMT'.
IF I_STEP = 3.
If Qarter = 1.
Concatenate dat1(4) 01 into dat3. " 200501
dat1 " 200503 which is supplied by user
elseif querter = 2
Concatenate dat1(4) 04 into dat3. " 200501
dat1 " 200503 which is supplied by user
etc
L_S_RANGE-LOW = DAT3
L_S_RANGE-HIGH = DAT1
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.
I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again from the authorization check or from the Monitor.
If you have specific problem please do let me know.
Regards
vijay
Message was edited by: sundaresan chander

Scenerios for using I_STEP parameter for creating customer exit variables.

Hi All,
I need to create a customer exit variable.
Please explain the different scenerios for using each i_step parameters.
For eg. in which practical scenerio i_step 3 is used?

Hi Shobhit,
You can find plenty of info on this in the forums, So i suggest you to do a small search with imp Key words. Anyways below is the std usage of I_STEP
I_STEP = 1
Call takes place directly before variable entry. Can be used to pre populate selection variables
I_STEP = 2
Call takes place directly after variable entry. This step is only started up when the same variable is not input ready and could not be filled at I_STEP=1.
I_STEP = 3 In this call, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called again.
I_STEP = 0
The enhancement is not called from the variable screen. The call can come from the authorization check or from the Monitor. This is where you want to put the mod for populating the authorization object.
This is basic info from help.sap.com.
regards,
Gaurav
Edited by: Gaurav Kothari on Aug 4, 2011 2:18 PM

How to get data using BEx variable

I've build a universe upon a Bex query with a variable.
When refreshing a WeBi report upon this universe with the filter (BEx variable) it works fine and returns data. The same does the QaaWS.
But when I use this QaaWS as a source for Xcelsius dashbord it doesn't return any data. The input value for the variable is the same in all cases, e.g. K4/2009.
What should be done to fix the issue?

What Xcelsius patch version you use?
If I recall correct, this is known issue that was suppose to be fixed in Xcelsius 2008 SP2
[SP2 direct download URL|https://websmp230.sap-ag.de/sap/bc/bsp/spn/download_basket/download.htm?objid=012002523100009338662009D&userid=I055661&action=DL_DIRECT]
Thanks
Subhodeep

How to Install Business Content BEX Variables.

Hi Experts.
i want to install all the standard bex variables
(exits, formulas) available in business content.
when i go to the business content i see lot of variables
of 0CALDAY which one to install ?. and even after installation of all none of them seem to appear in the BEX query designer?.
Is there anything am missing?
Thanks,
Hari Anand.

Hi,
A little correction to Aby's reply.
You don't have to have something like Billing date mapped to 0CALDAY in transfer rules.
It's enough to have just 0CALDAY.
The other dates (if you need them), like billing date, receiving date etc. are created as A REFERENCE TO 0CALDAY.
It means that to all derivative dates you may apply variables created on 0CALDAY.
You may not see all variables installed from a business content. -- Some variables are created on a particular infoobject and you can see those variables in the left panel, beneath this infoobject.
There are also text and formula variable that might be independent from infoobjects. You can see them while creating a formulas in structures.
Best regards,
Eugene

Variable customer exit

Hi all,
I created a query with customer exit variable that is filled from another variable manual entry.
When i start a query I receive this error message:
Error for variable in the customer exit
and in debug I find this message:
System error in the program CL_RSR_REQUEST and Form GET_SETXX_WA
How can I do?
Thanks
Gianmarco

when 'ZODACE'.
    tables: /BIC/AZSD_O0100,
            /BIC/AZSD_O0200.
    ranges: r_createdon for /BIC/AZSD_O0100-CREATEDON.
break-point.
    if i_step = 2.
      loop at i_t_var_range into loc_var_range
              where vnam = 'ZDATADOC'.
        clear r_createdon.
        r_createdon-low    = loc_var_range-low.
        r_createdon-high   = loc_var_range-high.
        r_createdon-sign   = 'I'.
        r_createdon-option = 'BT'.
        append r_createdon.
        exit.
      endloop.
      select DOC_NUMBER into
             /BIC/AZSD_O0100-DOC_NUMBER
             from /BIC/AZSD_O0100
              where /BIC/ZAUDAT in r_createdon.
        select single * from /BIC/AZSD_O0200
      select * from /BIC/AZSD_O0200
               where refer_doc = /BIC/AZSD_O0100-DOC_NUMBER.
          clear l_s_range.
          l_s_range-low = /BIC/AZSD_O0200-refer_doc.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          append l_s_range to e_t_range.
      endselect.
      endselect.
    endif.
The variable are:
ZODACE based on IO 0REFER_DOC with customer exit
ZDATADOC based on IO ZDATU with manual entry
After wich end-user digit a data in ZDATADOC popup I take ODOC_NUMBER in order item ODS ZSD_O01 where ZDATADOC=CREATEDON.
With 0DOC_NUMBER I go to delivery item ODS ZSD_O02 and I take the corresponding 0REFER_DOC and then I fill variable ZODACE.
0REFER_DOC is in row of the query.

How to debug i_step=0 Bex Variable (Customer Exit)

Similar Messages

Maybe you are looking for