How to Debug Upload Function (ZCL_RSPLF_FILE_UPLOAD)

Hello,
We have the standard Upload function customized to call a function module which eventually does some calculations. I need to modify the function module with extra logic. I cant test the FM directly as it doesn't have Test Frame.
Am stuck at how to debug the Upload function. Is it possible through program RSPLS_PLSEQ_EXECUTE but then how do I create the variant. Cant create it through Modeler.
Please suggest.
Thanks and regards
Gaurav

Hi Gaurav,
As per my understanding you are trying to debug the custom planning function created using SE24.Go to this transaction enter the function name and place the externa break point as suggested in interface you want to debug .
OR go to rsplf1 - specify function and place external break point.
You can get it triggered two ways.
If you already have GPS- Planning sequence built ,directly execute it .It will take you in debug mode.
You can also create new one if required for testing.
or
If you are using any layout to load data ,you can also trigger it from there.
It will take you to debug mode only after you place external breakpoint.
Do not put break point rgt after intialization....

Similar Messages

How to DEBUG a function module running in background mode? Please help!

Hi Experts,
   I am calling a function module in my ABAP code in background module using the following syntax:
CALL FUNCTION 'YBBC2_CREATE_SNAPSHOT' IN BACKGROUND TASK
          TABLES
            itab_std_format_inv = itab_std_format_inv
            itab_snapshot_inv = itab_snapshot_inv.
        COMMIT WORK.
If I put the breakpoint in the CALL FUNCTION line and execute the program, the debugger does not take me to the valled function module. This may be because I am running the function module as background task.
I cannot comment this "IN BACKGROUND TASK" statement as well since i am debugging in Quality system where I don't have change access.
So how to DEBUG a function module running in background mode? Please help!
Thanks
Gopal

Hi,
You could try to use the following trick:
(1) Put an endless loop into the coding of your function module where you want to start debugging, e.g.
DATA:
    lx_exit_loop(1)     TYPE c.
lx_exit_loop = ' '.
DO.
    IF ( lx_exit_loop = 'X' ).
      EXIT.
    ENDIF.
ENDDO.
(2) Call your function module in background task
(3) Call transaction SM50 and search for the background process.
(3) Choose from menu Program/Mode -> Program -> Debugging
Now you the debugger should bring you right to your endless loop. Set lx_loop_exit = 'X' in the debugger and continue (F5 or F6).
<b>Reward points</b>
Regards

How to debug a function module using in the generic datasource?

Hi all,
We have created a generic data source using function modulle and have been extracting the data for a single customer it contains single records but it has pulled out more than 10,000 records. how to debug the function module used in the data source.
since we schedule for extraction in bi and back ground job gets triggered in ecc for extraction,
i know in se37 we can select the function module name and then debug but still need to check while the bacground job is trigered through bi.
Thanks

Yes you can debug the Function Module.
Open the function module in SE37 and put a break point in the code where you want to check from, then come to RSA3 and give the datasource name and check the Debug check box on this screen, once you click on the start button it will take you the place where you have placed the break point in the FM, by pressing F5 you can see the flow of the FM.
Let me know whether this solves your issue.

How to debug the function separately which is added in the package

Hi Friends, I want to know how to debug the function separately, by taking it from package,. and i dont no where to add begin and end. and dont no how to give input to the function. ANd how to find the error which is detected from production, so i want to find from which statement its failing. So please guide me to proceed further. thanks in advance.

{ FUNCTION fn_get_trail_id (p_incr PLS_INTEGER DEFAULT 1) RETURN PLS_INTEGER IS
p_trail_id tb_xop_orders_trail.trail_id%TYPE;
BEGIN
IF p_incr >= 1 THEN
SELECT sq_xop_trail_id.NEXTVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
ELSIF p_incr = 0 THEN
SELECT sq_xop_trail_id.CURRVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
END IF;
END;
-- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BEGIN
ppr_openlog('AQ');
ppr_request_lock(v_cb_handle, v_cb_lock);
pr_xop_log_errors('AQ: ==== cb started ('||descr.msg_id||') ====');
my function is like this, how i can i in clude it in declare statement, and how to assign values for that.. and where i have to include "begin".plz help me

How to debug a function module

hi,
Please Tell me how to debug an Function module
Thanks in advance
ajay

Hi,
In SE37 while executing the FM there is an option to execute the same in Debugging mode. If you want to debug the FM as a stand alone code you can make use of this functionality. Provide the necessary input values and run the FM in debugging mode.
If you intend to debug the FM from another program wherein it is called you can always set a breakpoint inside the FM and execute the code in the calling program. The control will stop for you at the point where you have set the break point inside the FM automatically.
Hope you have a clear picture now.
Reward if helpful.

How to debug IDOC_OUTPUT_DESADV01 function customer exist

Hi,
I have requirment to add some logic on LVED2FZZ exit, I have added the logic but it is not working as expected.
I have put the break points in IDOC_OUTPUT_DESADV01 function module PERFORM SEGMENTS_FILL -> PERFORM SEND_SEGMENT_E1EDK07_DESADV -> PERFORM USEREXIT_E1EDK07 and triggered the output type from VL02N transaction, But program is not stopped at break points. I want analyze how data is popluting in segments urgently.
Please provide the step by step approach to debug IDOC_OUTPUT_DESADV01 function module from VL02N output type triggering.
Thanks,
Raj

Hi,
Put a break point in the required part of the User exit. Before saving the data in VL02N, activate debugging by '/h'.
When the Debugging screen appears, select the menu option, "Settings -> Update Debugging". System will give the message
"Update debugging turned on" in the status bar. Proceed with executing the Tcode by pressing F8. System will
pause the execution on the place where you have created the break point.
Regards
Vinod

How to debug a function module that is written to extend a datasource

Hi all -
this is BW related question.
I have a datasource that I extended but instead of writing the code in the user exit, I created a function group and a function module to populate the custom fields. My problem is - I want to debug the function module and when I do that, I have to give datasource, infosource and update mode as input parameters. There is no data in the internal table C_T_DATA, how can I debug to get data into this table.
please let me know.
thanks,
Sabrina.

Keep the Break point Before Updating.
just click on the table c_t_data .or choose the internal table and say CTRL+F4, you can internal table content
you can find change, append ,delete options.
just select the row and click append they one blank row will appear. just add entries to that , and enter
the record will be appended, do in the same way if you need more records to add...
regards
vijay

How to debug mapping function module during delta extraction?

Hi experts,
Somehow our delta is not working properly, and i would like to debug our mapping function module. How can i debug it during a delta extraction?
Some info:
Our source system is CRM and our extractor is extracting one order document (contracts in this case). I know that when we modify a contract, a bdoc is generated and then passed throught the mapping function then the extracted data to the delta queue. I just need to debug when the bdoc is being mapped to see what's wrong with the extracted data.
Thanks in advance,
Van

Hi,
Since you are using a Function Module for the Extraction. Edit the Function Module and give "BREAK-POINT" before the loop command. Check and activate the Function Module.
Now Extract the datasource using RSA3. Now you can debug it. After checking remove the "BREAK-POINT" from the function module. Also Check and activate the same.
Regards
Jayaram M

How to debug a function module in a user exit

Hello out there,
I am calling a function module in the updates rules of an InfoCube.
The function module "hangs" while running the InfoPackage - the Monitor
shows up with "Missung Message . Update rules finished for InfoCube ...".
How can I debug an InfoPackage or this function module run
by the InfoPackage ?
Thank You !
Martin Sautter

Hi Martin,
well, the weblog is quite good, but for your purpose, just follow the beginning until processing stops in the code. Then, in the top menu choose Breakpoint->Breakpoint at->Function module. In the following popup enter the name of the fm close the popup and press F8. Processing will stop in the fm.
regards
Siggi

How to debug LAE function modules in ECC

Hi,
I've been trying to debug sequence of FMs called by LAE during asset creation in ECC. The asset is created for every service contract created in SAP CRM and then replicated to ECC system. While debugging the flow from CRM, I could debug upto ECC and then put external breakpoing in LAE FMs mentioned above but those FMs were not hit.
LAFA_ASSETS_CREATE_ON_LEASE
LAFA_ASSETS_CREATE
LAFA_ASSET_CREATE
LAFA_ASSETS_RETIRED_GET
Could anybody help me debugging these FMs?
Regards,
Ravi

Hi Ravi,
this process works asynchonous. This means from CRM some entries are stored in LAE_CRM* tables with function module FILA_BUS_TRANSACTION_RECEVIE. A triggered function picks up the entreis and process them. This function runs through your mentioned function modules.
In a test system, you can call transaction FILATEST and copy the contract sent from CRM and using the simulation or execution function. This will bring you to these function modules.
Kind regards,
Steve
Edited by: Steve Trester on Mar 1, 2011 8:13 AM

How to debug LAE function modules

Hi FI Expert,
I've been trying to debug sequence of FMs called by LAE during asset creation.
LAFA_ASSETS_CREATE_ON_LEASE
LAFA_ASSETS_CREATE
LAFA_ASSET_CREATE
LAFA_ASSETS_RETIRED_GET
The asset is created for every service contract created in SAP CRM and then replicated to ECC system . While debugging the flow, I could debug upto ECC and then put external breakpoing in LAE FMs mentioned above but those FMs were not hit.
Could anybody help me debugging these FMs?
Regards,
Ravi

Hi Ravi,
this process works asynchonous. This means from CRM some entries are stored in LAE_CRM* tables with function module FILA_BUS_TRANSACTION_RECEVIE. A triggered function picks up the entreis and process them. This function runs through your mentioned function modules.
In a test system, you can call transaction FILATEST and copy the contract sent from CRM and using the simulation or execution function. This will bring you to these function modules.
Kind regards,
Steve

Help w/MaxDB Function; also: how does the "Debug SQL" function work?

Hi there forum folks,
In my former life, I was a Basis guy, but I haven't had the pleasure of working directly with SAP applications in a few months. My current project is to attempt to use MaxDB in a real estate environment. We're tracking home listings so that we can build statistical reports... such as "what agents are in the Top 100 in postal code X?"
Anyway, as part of this project, I have attempted to construct my very first MaxDB database function. Unfortunately, it doesn't give me the answers I'm hoping to see. Here's the function:
CREATE FUNCTION COUNT_LISTINGS (AGENTID CHAR(10)) RETURNS FIXED(6,1) AS
VAR COLISTINGAGENTID CHAR(10);
      LISTINGAGENTID   CHAR(10);
      MLSNUMBER        CHAR(7);
      UNITS            FIXED(6,1);
SET UNITS = 0;
DECLARE FUNCTIONRESULT CURSOR FOR
    SELECT MLSNUMBER,
           LISTINGAGENTID,
           COLISTINGAGENTID FROM FREDDIE.GLAR_SOLDS
     WHERE LISTINGAGENTID = :agentid OR COLISTINGAGENTID = :agentid;
IF $COUNT IS NULL THEN
    BEGIN
      CLOSE FUNCTIONRESULT;
      RETURN UNITS;
    END
ELSE
    SET $RC = 0;
WHILE $RC = 0 DO BEGIN
    FETCH FUNCTIONRESULT INTO :mlsnumber, :listingagentid, :colistingagentid;
    IF ( LISTINGAGENTID   = AGENTID AND COLISTINGAGENTID IS NULL ) OR
       ( COLISTINGAGENTID = AGENTID AND LISTINGAGENTID   IS NULL ) THEN
      SET UNITS = UNITS + 1
    ELSE
      SET UNITS = UNITS + 0.5;
END;
CLOSE FUNCTIONRESULT;
RETURN UNITS;
I've tried to follow the official MaxDB documentation. My first deviation from that standard was the use of the "$COUNT" variable (instead of the "$RC" variable) immediately after the DECLARE/SELECT statement above. When I tried to use $RC, for either a successful or unsuccessful query, $RC was always set to a non-zero value.
I believe I'm past that, but now my issue is down around that FETCH statement. The UNITS variable doesn't end up with the value I expect. I know that it can be terribly confusing to try to analyze someone else's logic, but here's a brief narrative that describes what I'm trying to do...
The GLAR_SOLDS table holds one line for each home sold. It's keyed by the MLSnumber. Each record also stores up to four agents who've been involved in the transaction: the listing agent, the co-listing agent, the selling agent, and the co-selling agent. The database function I've written above pertains to the listing side only. If I can get this to work, a separate function will process the selling side. If no co-listing agent is involved in a given sell, that agent should get credit for 1 unit sold. If he/she has help from a co-listing agent, the agent should only get credit for 1/2 unit sold.
Also, does anyone know how the "Debug SQL" functionality is supposed to work within Database Studio? When I right-mouse click on my function, and follow the path thru "Debug As...", after entering the connection & function arguments, I'm presented with an empty screen. If you could point me to some documentation somewhere, I'd gratefully read it.
I'm using MaxDB 7.7.06.09 on Windows XP (WIN32) with MaxDB Database Studio 7.7.06.09 (build 009-123-202-944).
Thanks everyone for your help & advice.
~Fred

Fred,
please either provide the full SQL statements for your example or stick with mine.
I'm not going to build it up myself a second time to suit yours now.
> But now, my issue is how do I store the resultant data in its own table?
So where is the problem?
INSERT INTO <target table> (field 1, field 2, ...) (<your query>) UDPATE DUPLICATES-
With my tables this looks like this:
create table sell_result (list_agent varchar(20) primary key, SUM_CREDIT fixed (10,2))
insert
into sell_result (list_agent,sum_credit)
    ( select list_agent, sum (credit) as SUM_CREDIT
      from ( select sh.object_id,lag.name as list_agent, 1 as credit
             from soldhomes sh join agents lag on lag.id = sh.list_agent_id
            union all
             select sh.object_id, lag.name as list_coagent, 0.5 as credit
             from soldhomes sh join agents lag on lag.id = sh.list_coagent_id
      group by list_agent
update duplicates
Check what we have now
sqlcli db770=> select * from sell_result
| LIST_AGENT           | SUM_CREDIT        |
| -------------------- | ----------------- |
| Lars                 |              4.50 |
| Lisa                 |              3.00 |
| Mona                 |              2.50 |
| Paul                 |              2.50 |
4 rows selected (600 usec)
Now add some sales data...
Insert into soldhomes values (11, 1, 2, NULL, NULL)
Insert into soldhomes values (12, 2, NULL, NULL, NULL)
Insert into soldhomes values (13, 2, NULL, NULL, NULL)
Re-run the INSERT command and you're done:
sqlcli db770=> select * from sell_result
| LIST_AGENT           | SUM_CREDIT        |
| -------------------- | ----------------- |
| Lars                 |              5.50 |
| Lisa                 |              3.00 |
| Mona                 |              5.00 |
| Paul                 |              2.50 |
4 rows selected (390 usec)
Neat, isn't it?

How to debug Function Modules from ISA!!!

Hi Gurus,
How to debug the function modules from ISA.
For Ex:If i am in shopping cart or product catalog,e.t.c..i need to know which FM is calling from backend, how to debug the FMs/Bapis related to that from ISA side.
direct me to all the possible ways.
Regards,
Anil.

Hello Anil,
There are a few things you need to look at when trying to debug .
1. The function module needed ( you can do a trace to see which one is called.)
2. The user that is been user With statefull and stateless connection the FM can be called by either the JCO user or the internet user. This will need to be considered when setting your external break point.
3. The server been used, You will need to check the XCM to see which server is been used ie are you using a group connect of a specific server , You need to make sure that you are setting the breakpoint on the server that is specified in the XCM.
Have a look at note [871907|https://service.sap.com/sap/support/notes/871907] the attachment to the note may help you a lot. .
Hope this helps.
Regards
Mark
Edited by: Mark Foley on Feb 11, 2009 11:10 AM

Function Exit , How to Debug

hi
i have created five function with four are hidden and one function Exit , for Function Exit i am using functin module , but when i put a Breakpoint in Function module and run the BPS , Debugging is not working out , it directly executing.
can anyone help me how to debug the function exit(Function Module) before running the report

Hi,
Go to that corresponding parameter group for that exit function, right click -execute with trace..it will take you to debugging screen.. (put a breakpoint before execution)

Debug a functional module

Hi,
Could you please tell me how to debug the function module.
Thanks,
Subha.

In SE37 while executing the FM there is an option to execute the same in Debugging mode. If you want to debug the FM as a stand alone code you can make use of this functionality. Provide the necessary input values and run the FM in debugging mode.
If you intend to debug the FM from another program wherein it is called you can always set a breakpoint inside the FM and execute the code in the calling program. The control will stop for you at the point where you have set the break point inside the FM automatically.
check this link also
http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801f36454211d189710000e8322d00/content.htm

How to Debug Upload Function (ZCL_RSPLF_FILE_UPLOAD)

Similar Messages

Maybe you are looking for