How to debugg idoc
hi,
please guide me how to debugg idoc.
Hi Subhasis Sahoo,
Hope these links may help you
How to debug Idoc?
How to debug an Outbound IDoc
How to debug the idoc.
How to debug an Outbound IDoc
OUTBOUND IDOC DEBUGGING
Regards,
Ram
Similar Messages
-
How to debugg the outbound idoc
Hi all,
I am adding one segment standard Invoic02 outbound idoc.
Executing invoice number ,idoc automaticall y trigger and populate the data.
1)problem is my new adding segment is not populated idoc level.
2)I am testind idoc (WE19) showing a 02 error.
3) How to debugg the outbound idoc.
Thanks
SreddyTake a look at your outbound processing code (transaction WE41). When you double click on the entry you are using you can find the function module which is used to process the IDOC. Just set a breakpoint at the beginning of that function module and you can debug the creation of your outbound IDOC.
Hope that helps,
Michael -
How to debugg particular statement in sap script
hi friends,
i want to know How to debugg particular statement in sap script.
plz reply.
thanks in advance,
regards
bhaskarhi
execute rstxdbug to activate script debugger...once the driver program reaches open_form, a popup box will come where u can mention the name of a command, call functinon, text element, etc to place a break point...once it gets into the debugging mode, double click on any line to set a break point, after that pressing f8 will get you to that line
if helpful, reward
Sathish. R -
How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)
Hi
I have scenario: Http To Idoc
first requirment:
i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender.
second requirment:
while mapping COM Xml file come from Http to COMMAT04 idoc into SAP system i need to to check whether corresponding material already exist in R/3 or not, if material is not exist, process should be cancelled and alert should be raised. ( i mean to say before sending COMMAT04 idoc into SAP, corresponding material should be exist already, if not alert should be send to http sender)
please thrown some inputs, if sombody has already done with htis....
Thanks in Advance, and help would be appreciated..
Thanks and Regards
Rajesh BabuJust providing the specifics that Suhail has intended.
How to handle IDOC Acknowledgements in XI.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
RFC Mapping Lookups:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 7, 2008 3:32 PM -
how to push idoc from r/3
Hello
We expect you to be able to search the forum to get answers to basic questions such as this.
- This thread will be locked.
- No points will be awarded to any of the replies.
- Your user will be monitored and if this type of questioning continues your account will be closed.
Please familiarise yourself with the forum Rules of Engagement before posting.
Rules of Engagement
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
Regards
XI/PI Moderator -
How to use IDOC and RFC adapter in 1 scenario?
We have AAA field and BBB field and we want to send AAA field to receiver sap system using IDOC adapter and BBB field to receiver sap system using RFC adapter. But how to use IDOC and RFC adapter in 1 scenario and how to map and what are the design and configuration objects we require to create?
To achieve this you have to use
Two Interface Determinations
Two Communication Channels (IDOC & RFC)
& Two Receiver Aggrements.
Use the Enhanced Interface determination and give your conditions there. Based on you condition your interface mapping will be triggered and data will be sent to IDOC & RFC respectively. -
How to map Idoc fields with external file
Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment
-
How to trigger IDOC in a batch job?
hi,
My requirement is that a batch job must run on R/3 side to check if bank data are created or changed.Any creation or update in table BNKA will trigger an IDOC
If a record is created IDOC BANK_CREATE01 should be triggered and
If a record is changed/deleted IDOC BANK_CHANGE01 should be triggered
A background program should run periodically (every hour) and check the table CDHDR for object class BANK.
The program must check if any new entry exist in the table since the last run.
New records can be identified according to the fields UDATE and UTIME.
According to the change indicator (CHANGE_IND) the program will determine if the IDOC_CREATE (changeID=I) should be run or IDOC_CHANGE (changeID=U or D).
If change ID=D, then deletion indicator will be set in the CHANGE IDOC.
Can anybody tell me how will i write the code for this and how to trigger IDOc as i very basic knowledge in ABAP
Thanks & Regards,
Loveenahi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri -
Hi Frnds,
How to monitor IDOC adapter. Its resides in Integration Engine.
Regards,
Rajhi,
Adding to above you can refer to this wiki.It has all in fo about Idoc.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/step%252bby%252bstep%252bprocedure%252bfor%252bcreation%252bof%252bidoc
regards,
ujjwal kumar -
Hi,
I did all design and configuration steps and ALE configuration steps for Idoc to file scenario. Can any one tell me how to put idoc that this scenario should work??Hi Pavani,
WE19 -> u can enter either basic type or message type.
click on create
go to menu object->edit control record
there give the receiver system paramters and source system parameters
after that double click on idoc segments, window opens with all the fields, give data and click on Test Idoc outbound processing.
check the status in we02.
Regards,
Ravi. -
How to convert IDOC to flat file in XI
Hello SDNers
I have a scenario IDOC --> XI --> Flat file. My question is how to conver IDOC to flat file. At least there are two ways to do that:
1) Define a flat structure in PI that reflects the IDOC structure, then using content conversion to convert the flat structure to flat file in hte receiver communication channel.
2) There is a [document |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a] talking about using a generic ABAP mapping to map any IDOC to flat file.
For the option 1, I don't want that way, because I would need to define a flat structure in PI for each IDOC which is too much effort. (I would have dozens of IDOC scenarios)
The second one is very attractive. However the document is not complete to follow. Basically it does not explain how the inbound flat structure looks like. I guess the generic ABAP mapping is used to map any IDOC_XML structure to a flat structure, then in the file receiver communication channel to convert the flat structure to flat file format. But the document does not mention how the flat structure looks like. Has somebody tried this scenario? If yes, can you please let me know the steps to do in ESR (IR) and ID? Basically what structure the IDOC_XML should be mapped to using the generic ABAP mapping class?
Or somebody has other ideas on how to convert IDOC to flat file?
Thank you so much
Eric> 1) You are saying that for Java mapping and abap mapping, the target data type (messag type) is just a dummy one, the real (XML) message the receiver will recieve is the one (stream) produced by the java or abap mapping. Is that correct?
Definitely yes!
>
> 2) For the abap mapping option, I would define a dummy target data type. Do I need to do any content conversion in the receiver adapter (communication channel)?
None wat so ever.The output of your Java Mapping will be the Native Idoc Format.
>
> 3) I tried with a dummy target data type as mentioned in my second post, can you see any clue in the error message what is wrong?
Dats one thing I cant help much. Just make sure that the ABAP report is valid and take the help of a ABAP'er to debug what is going wrong. Not much of a ABAP guy, can read ABAP code, but cant write one myself
Try to test the program standalone to see how it works. Maybe take some Idoc XML file as input and then dump the output to a .txt file and so on.
Regards
Bhavesh
PS : All this is from what I have read of this guide. I have not convert Idoc XML to Native Idoc but have used this guide to convert Native Idoc to Idoc XML . -
How To Convert IDOC to FLAT File ?
Dear Expert,
My requirement is to convert the IDOC to FLAT File using XI. How can i do this. I have gone thru the Guide How to convert IDOC to Flat file using ABAP mapping but it does not talk about what are all the stpes i need to do in IR & ID.
I am ready to use ABAP mapping since i am an ABAPER.
Is it recommended to use ABAP mapping since we expect daily 500 IDOCs to be converted to a flat file & transfer this flat file to some FTP location.
Can anybody tell me the stpes how to do this in XI. The steps i am expecting like how to define the Data Type / Message type / Mapping etc & how to configure the channel ?
The Flat file i want to convert should look like the way IDOC file gets created in FILE FTP port in SAP.
Regards,
UmeshI think there is some confusion... Let me explian my problem once again.
I want to convert the Shipment IDOC as it is the moment the shipment documents gets created in R/3. I dont want to collect many IDOCs & make as single file. For each IDOC it should create a Flat File.
Secondly if i have to MAP the whole IDOC the graphical mapping is too difficult.
So instead of that can i use ABAP/XSLT/JAVA whichever is easy. ?
Since i am ABAPER i can use ABAP mapping.
The Output file should look like as below.
EDI_DC40 9000000000011785526620 3012 OILSHI01 OILSH1 SAPP01 LS SAPCLNT900 A000000018LS WBIMQSI 20071031161506 20071031161506
E2OILSH001 90000000000117855260000010000000250 1011537344 1101 1 300X1 TRKGMKG 0202KG KG X ZTLF X XX 000 BLX X X60002200710310000002007103100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 E2OILSA 9000000000011785526000002000001031011537344000001SP 0000201496000000000000000000 00 00 V E2OILSA 9000000000011785526000003000001031011537344000002SP 0000201496000000000000000000 00 00 S
E2OILSV 900000000001178552600000400000103MH04CG6052 LPBW50D62401033 000020149601KG KGM 35200.00000 17200.00000 18000.00000 0.000 0.000 0.000 DLLPGB220071031000000 00000000000000000000000000000000000 0000XX 6000AAAA0.00000 0.00000 17200.00000 35200.00000 18000.00000 MH04CG6052 new bulk tender approved rs LPG Bulk Lorry - WR Refinery TPP BABA TRANSLINES kg kg 0.000 0.00 0.00 E2OILSC 9000000000011785526000005000004041 001 18000.000000 18000.000000 35200.000000 0.000000 0.000000 KG E2OILSQ001 9000000000011785526000006000005050011 MH04CG6052MH04CG60521J 05041089055000 00000118000.0000000 KG 18000.000000 18000.000000 6000V04 18000.000 KGM18000.000 KGM00000000 V 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0001 E2OILS2 9000000000011785526000007000004040001000001000200020000.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 XX0000000000000000000000000000 XX0504108905J5000 PUNE LPG BOTTLING PLANT START 0001 1END 0001 10.000000 0.000000 0.000000 0.000000 0.000000 0.000000
Pl. Help me its Urgent.
Regards,
Umesh -
How to download idoc to logical system
Hi ,
How to download idoc (invoic02 ) to a logical system , when a sale order is created .
after downloading how to convert to xml message.
can any one help me out how to do this .since i dont have any prer knowledge on idocs little bit elobrate will be helpfull.
Thanks ,
Vinay .Hi
Go thru the bellow links.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400365
Idoc's
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Thanks
Sunil -
How to trigger IDOC'S from SAP
Hi All,
How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
Thanks,
AbhiYou can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn). Master Data related to orders can be triggered from POIM. Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it. Will continue to look and will post link when I find it.
Regards,
Mike
I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
Edited by: Michael Appleby on May 5, 2009 1:29 PM -
How to transfer IDOC information to BUT000?
Hi,
We are working on transferring Business Partner Master Data from SAP HR system to SAP CRM system through IDOCs.
The changes done in the standard SAP fields like (Partner No, Fist name, Last name etc) are transferred to BUT000 in SAP CRM successfully.
But the Z Fields created by the client are not getting updated.
When we checked the IDOC in SAP CRM in transaction bd87, it has the updated information of the Z Fields, but the system fails to transfer the same to BUT000.
To put it in short our query is How to transfer IDOC information to BUT000?
Anyone who has worked on this before, please provide your valuable inputs.
Thanks in anticipation
RahulIf I understand ur requirement correctly then u need to move idoc_data-sdata to an internal table itab.In that case no need to move data from idoc_data-sdata to itab directly using OFF SETT.
1st declare one wrokarea of type E1EDL24.
data: w_E1EDL24 type E1EDL24.
Now move the content of idoc_data-sdata to the workarea.
move idoc_data-sdata to w_E1EDL24.
Now u can do field by field assignment to move data from w_E1EDL24 to ur table.
fs_itm_data-tapos = w_E1EDL24-tapos.
fs_itm_data-nista = w_E1EDL24-nista.
fs_itm_data-altme = w_E1EDL24-altme.
Here I am assuming that field names in the structure fs_itm_data are same as field names in the segment w_E1EDL24.
Regards,
Joy.
Maybe you are looking for
-
Can I watch a rented movie on my two ipads
If I rent a movie on my ipad. Can I also watch on my other ipad?
-
Hi All, We have issue in which while creating Service master, wrong unit of measure was used. Now to correct this, we need to do mass update of these service masters created. Is there any way in to do this. Any program that SAP has which would solve
-
HI , DEAR , I HAVE SOME PROBLEMS WITH MY IPHONE, _1*. ONE OF THE BOTTOM SPEAKER NOT WORKING*_ _2. GETTING OFF ITSELF WHILE TALKING, AND TAKES TIME TO COME BACK,THEN I CANT DISCONECT THE CALL AS WELL_ 3_+. BLUETOOTH NOT CONNECTING /NOT FINDING ANY OTH
-
I just recevied an Ipad Mini for a Christmas present. Please provide us with a software update!!!!!!!!! LIke many others it won't commect to the internet even after updating to OS6.0.2 I would love to be able to use my present!!!!!!!
-
Acquire and Displaying Video from D-Link DCS-930L
Hello! I want to know about acquiring video from the camera as I have mentioned in the topic, but I don,t have much experience about IMAQ related apps.The idea behind the whole concept is to display a video and then through some kind of shared variab