How to debugg particular statement in sap script

hi friends,
i want to know How to debugg particular statement in sap script.
plz reply.
thanks in advance,
regards
bhaskar

hi
  execute rstxdbug to activate script debugger...once the driver program reaches open_form, a popup box will come where u can mention the name of a command, call functinon, text element, etc to place a break point...once it gets into the debugging mode, double click on any line to set a break point, after that pressing f8 will get you to that line
if helpful, reward
Sathish. R

Similar Messages

  • How to use perform statements in sap scripts

    how to use perform statements in sap scripts . and pls send me one progam for this
    thnaks
    raja

    Hi Raja,
    <b>PERFORM</b> key work is used to include subroutine in sapscript form...
    But the processing is lttle bit different form the one we use in ABAP.
    Here the paramters passed to form is stored in internal table of name-value table. there are two table one for inbound parameter and other for outbound parameters.
    Check out the example below to see how this is used..
    <b>Definition in the SAPscript form:</b>
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    <b>Coding of the calling ABAP program:</b>
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY ‘PAGE’.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY ‘NEXTPAGE’.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE OUT_PAR WITH KEY ‘BARCODE’.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = ‘|’. "First page
    ELSE.
    OUT_PAR-VALUE = ‘||’. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = ‘L’. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    Hope this is clear to understand...
    Enjoy SAP.
    Pankaj Singh.

  • Use of IF statement in SAP Scripts

    Can u tell me how to use IF statement in SAP Scripts.
    The problem is
    if &sy-tabix& eq '1'
    total
    else
    total1.
    endif.
    this sy-tabix is not working

    i think sy-tabix will not work here....
    do like this..
    data : vtabix type i.
    loop at itab.
    vtabix = sy-tabix.
    write_form...for the text element..
    endloop.
    in form layout
    /: if &vtabix(c)& eq 1
    /:endif
    regards
    shiba dutta

  • How to print Special Characters in Sap-Scripts

    How to print Special Characters in Sap-Scripts
    Thanks,
    Ravi

    Hi
    if u want print special characters we can use hot codes i.e '  '  (single inverted commas). in between these hot codes insert u r special characters.
    write    '    !@#$%^&*( )  '.
    for the above write statement output is
    output is   !@#$%^&*( )

  • How to write a perform in Sap Script

    Hi Guys,
    Can anyone let me know how to write a perform statement in Sap Script.
    Thanks,
    Ramesh

    I just took this example from SAP Help
    =======================================
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.

  • How to call a subroutine from sap script

    hi friends,
    Can anybody tell me How to call a subroutine from sap script .
    thanks n regards .
    Mahesh

    hi..
    Calling ABAP Subroutines: PERFORM 
    You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
    PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
    The system does not execute the PERFORM command within SAPscript replace modules, such as TEXT_SYMBOL_REPLACE or TEXT_INCLUDE_REPLACE. The replace modules can only replace symbol values or resolve include texts, but not interpret SAPscript control commands.
    Syntax in a form window:
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
    FORM <form> TABLES IN_TAB STRUCTURE ITCSY
    OUT_TAB STRUCTURE ITCSY.
    ENDFORM.
    The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
    The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
    From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (‘First page’, ‘Next page’, ‘Last page’) is printed as local variable symbol.
    Definition in the SAPscript form:
    /: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
    /: USING &PAGE&
    /: USING &NEXTPAGE&
    /: CHANGING &BARCODE&
    /: ENDPERFORM
    / &BARCODE&
    Coding of the calling ABAP program:
    REPORT QCJPERFO.
    FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA: PAGNUM LIKE SY-TABIX, "page number
    NEXTPAGE LIKE SY-TABIX. "number of next page
    READ TABLE IN_PAR WITH KEY ‘PAGE’.
    CHECK SY-SUBRC = 0.
    PAGNUM = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY ‘NEXTPAGE’.
    CHECK SY-SUBRC = 0.
    NEXTPAGE = IN_PAR-VALUE.
    READ TABLE OUT_PAR WITH KEY ‘BARCODE’.
    CHECK SY-SUBRC = 0.
    IF PAGNUM = 1.
    OUT_PAR-VALUE = ‘|’. "First page
    ELSE.
    OUT_PAR-VALUE = ‘||’. "Next page
    ENDIF.
    IF NEXTPAGE = 0.
    OUT_PAR-VALUE+2 = ‘L’. "Flag: last page
    ENDIF.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    regards,
    veeresh

  • If Statement in SAP Scripts

    Hi All,
    I have written the below If statement in  SAP scripts but when i execute the same the controll doent check the second line entries. If firtst line doesnot satisfy it goes to the else part. Kindly suggest what is wrong in this..
    /:           IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
    /:           &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
    /:           &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
    /:           &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
    /:           ELSE
    /:           ENDIF.

    Hi neha,
    Try to use the '/E' fo rnext line
    /E->Extended line
    Here is a code:
    /: IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
    /E  &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
    /E  &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
    /E &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
    /: ELSE
    /: ENDIF.
    Hope this helps you.
    Regards,
    Rajani

  • How to print last page in sap script in ladscape format?

    Hi all,
    can any 1 tell me How to print last page in sap script in ladscape format?
    Thanks In advance.
    Pravin

    Hi Pravin Sherkar,
    we can do this in SAP Scripts.
    we need to create two pages, one of landscape and another of potrait.
    now after filling the data at last we need to call the page which is of format landscape using START_FORM  function module.
    You can use condition &PAGE& = &FORMPAGES&.
    Please check this link
    Printing Portrait/Landscape in sapscript
    Re: Landscape and potrait in same layout?
    http://www.sap-img.com/ts013.htm
    Best regards,
    raam

  • How to use IF Conditon in SAP Scripts?

    Hi Guys,
                   I am having adoubt how to use IF conditon with multiple variables in SAp Scripts
    for ex If a>b and a>c and a>d
             Elseif b>a and b>c and b> d.
             Elseif .....
              endif.
              How to use above example in SAP Scripts.
    thanks,
    Gopi.

    hi Gopi,
    it is almost the same as normal ABAP, you only have to use & before and after the variable and the variable has to be in capitals and you have to make the line as command ( /: before the line )
    IF &A& > &B& AND ...
    text to print
    ELSEIF ...
    text to print
    ENDIF.
    hope this helps
    ec

  • How to get the last page  SAP Script form

    How to get the last page  SAP Script form.
    I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
    Regards

    Hi
    You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
    From SAP Help:
    This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
    Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
    /: IF &NEXTPAGE& = '0'
       Last page
    /: ENDIF
    Max

  • How to print Vertical barcode in SAP script

    I want to print barcode related items in SAP script . can you plz tell me any one
    1.How to print vertical barcode in SAP script ?
    2.How to print vertical text in SAP script ?

    1.
    Create the character format in se71, in that select standard barcode. like
    Char.format: C1 Description: Barcode
    Barcode: BC_CD39 save the character format.
    you can select from the list.
    in the form coding, can you use barcode like
    <C1> program variablr <>.
    <C1> &itab-matnr <>.    "--->like this
    Then it shows the barcode in output.
    check this.
    2. for vertical text ..
    if this is a window text then its possible but
    like
    S
    H
    I
    P
    T
    O
    This is possible in giving the window name but in the layout i never tried this.
    If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
    regards,
    vijay.

  • How to Avoid blank page in SAP Script

    I am working on a Script. My Script prints a check.
    This script is a copy of a std script.
    It has 3 pages - First Next Last
    My First page has all the required data.
    My second page is empty with out any values.
    I am getting the blank page as Page 2 when executing. How can we avoid it ?
    Senthil

    Hi Senthil,
    Please see the below points:
    1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
    2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
    Please see the link which is similar to your problem:
    Re: How to remove blank page in sap script
    May it helps you.
    Regards.
    Deepak Sharma.

  • How to insert the style in sap-script? and in smart form?

    how to insert the style in sap-script? and in smart form?

    Hi..,
    For SAP scripts u need to create them in SE72 ...
    and u can include them in the script editor as..
    /: STYLE <STYLE-NAME>
    P1 text...............  (*** P1 is the Paragraph format created in SE72 )
    /: STYLE *
    For smartforms u need to go for the transaction (tcode) SMARTSTYLES... here u can create paragraph and character formats globally...
    <b>Sunil, plz do remember to close all your threads, when ur problem is solved !!</b>
    reward all helpful answers,
    sai ramesh

  • HOW TO CREATE A VARIABLE IN SAP SCRIPT

    HI ALL,
    CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
    THANK YOU,
    BYE
    TAKE CARE.

    Hi Ravi,
    You can use like this
    A text in the editor contains the following DEFINE commands:
    /: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
    &mysymbol&
    /: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
    / &mysymbol&
    The printed text appears

  • How to put Page break in SAP Script

    Hi Experts,
    Please tell me how to put page break in SAP Script. or give some sample code
    looking forward for your reply..
    Regards,
    Kali Pramod

    Hi,
      NEW-PAGE is used to insert a page break ,
      it can be conditional if used between IF..ENDIF
      e.g. /:IF &KNA1-NAME1& = 'XYZname'
            /:NEW-PAGE
           /:ENDIF
      If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
    reward if useful.

Maybe you are looking for