How to debugg remodeling user exit code?

hi all,
did any body debugg the User Exit for Remodelling a cube?
Regards,
Nagesh Ganisetti.

Hi Nagesh,
I have never used remodelling exit tool but just an small regular idea,as we are using IF_RSCNV_EXIT interface exit for remodelling if you keep 'break-username' or 'break-point' in between your code ,when you started processing your remodelling I think that process will get stopped at that beak point.
Regards,
KK

Similar Messages

How to find out user exits of t-code va03

hi all
 how to find out user exits of any t-code .
regards
deepak

Hi Deepak,
Try this code.
*& Report Z_USEREXIT *
REPORT Z_USEREXIT
NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
 tadir, "Directory of Repository Objects
 modsapt, "SAP Enhancements - Short Texts
 modact, "Modifications
 trdir, "System table TRDIR
 tfdir, "Function Module
 enlfdir, "Additional Attributes for Function Modules
 tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
 WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
 SELECT SINGLE * FROM tadir
 WHERE pgmid = 'R3TR'
 AND object = 'PROG'
 AND obj_name = tstc-pgmna.
 MOVE : tadir-devclass TO v_devclass.
 IF sy-subrc NE 0.
 SELECT SINGLE * FROM trdir
 WHERE name = tstc-pgmna.
 IF trdir-subc EQ 'F'.
 SELECT SINGLE * FROM tfdir
 WHERE pname = tstc-pgmna.
 SELECT SINGLE * FROM enlfdir
 WHERE funcname = tfdir-funcname.
 SELECT SINGLE * FROM tadir
 WHERE pgmid = 'R3TR'
 AND object = 'FUGR'
 AND obj_name = enlfdir-area.
 MOVE : tadir-devclass TO v_devclass.
 ENDIF.
 ENDIF.
Find SAP Modifactions
 SELECT * FROM tadir
 INTO TABLE jtab
 WHERE pgmid = 'R3TR'
 AND object = 'SMOD'
 AND devclass = v_devclass.
 SELECT SINGLE * FROM tstct
 WHERE sprsl EQ sy-langu
 AND tcode EQ p_tcode.
 FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
 WRITE:/(19) 'Transaction Code - ',
 20(20) p_tcode,
 45(50) tstct-ttext.
 SKIP.
 IF NOT jtab[] IS INITIAL.
 WRITE:/(95) sy-uline.
 FORMAT COLOR COL_HEADING INTENSIFIED ON.
 WRITE:/1 sy-vline,
 2 'Exit Name',
 21 sy-vline ,
 22 'Description',
 95 sy-vline.
 WRITE:/(95) sy-uline.
 LOOP AT jtab.
 SELECT SINGLE * FROM modsapt
 WHERE sprsl = sy-langu AND
 name = jtab-obj_name.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 WRITE:/1 sy-vline,
 2 jtab-obj_name HOTSPOT ON,
 21 sy-vline ,
 22 modsapt-modtext,
 95 sy-vline.
 ENDLOOP.
 WRITE:/(95) sy-uline.
 DESCRIBE TABLE jtab.
 SKIP.
 FORMAT COLOR COL_TOTAL INTENSIFIED ON.
 WRITE:/ 'No of Exits:' , sy-tfill.
 ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(95) 'No User Exit exists'.
 ENDIF.
ELSE.
 FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
 WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
plz reward points if helpful or if it solves ur query.
Thanks
Chinmay

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find the user exit for infotype 2013 ?

Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth P

reward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI.

How to use/activate user exits

Hi all,
i wish to use user exit COZF0001...
however i have no experience how to do it. do i need an ABAPer or other consultant to do it or can i just activate it and make it work with minimal instructions?
kindly give procedure/overview how to activate/use user exits.
thanks in advance

Hi Ramesh,
Go to transaction CMOD . Create a project called ZVA01. Choose the Enhancement assign radio button and press the Change button. In the first column enter COZF0001.
Note that an enhancement can only be used in 1 project. If the enhancement is already in use, and error message will be displayed
Click on Save . Go to Components. You can now see that enhancement uses the user exit EXIT_SAPLCOZF_001. Double click on the exit and add your code.
Activate the include program. Go back to CMOD and activate the project.
-- Shivaji

HOW TO CREATE A USER-EXIT FOR MB31 GOODS RECEIPT

Hy,
HOW TO CREATE A USER-EXIT FOR MB31
TO COMPARE ORDER QTY CONFIRMED AND GOODS RECEIPT QTY
( IF GR QTY GREATER THAN CONFIRMED QTY ERROR MESSAGE SHOULD COME AND NOT ALLOW TRANSCATION TO PROCEED).
POINTS CONFIRMED.
REGARDS,
KARTIKEY.

Hi Rawat,
 You Don't need to create User Exits,but you need to find user Exits.Below are list of user Exits for MB31.
Use proper exit as per your requirement.
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
award points if ans is useful.
Regards,
Albert

How to find out user exit

Hi All,
How to find out User Exit in particular program.
I mean if you have one profile, how to find is there any user exits in that program.
Appreciate if any body tel answer.
Thanks & Regards,
Subbu

You could try searching the main program for "userexit_"
This would give you a list of all the available user exits within the application.
For Customer exits, you could search SMOD with a short description ex: order in the F4 help. Another way is to search for CUSTOMER-FUNCTION in the main program. You can then navigate to the enhancement in the customer function and use the Z Program in the enhancement.
http://www.easymarketplace.de/userexit.php - has a complete list.
More specifically, in case you're looking for SD exits - http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm.

How to find the user exits and BADIS from SPRO

Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
Madhavi

Hi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi

How do we handle User exits in XML Publisher

Hi,
Can anyone tell me how do we handle user exits in XML Publisher ?
Thanks,
Kiran.

Do tyou mean the original Oracle Reports user exits ?
If so then the flexfield ones are handled in the data template, check the user guide. Format currency should be called in the template layer. You do not need srw.init with data templates.
Regards, Tim

BW User Exit - Code in function of the query name

Hi,
I would like to create an user exit code which execute a algorithm different in function of the query executed. do you know in which variable is store the technical name of the query.
CASE query
    WHEN 'Z_ZAPO_001'.
       V1 = 1
    WHEN 'Z_ZAPO_002'.
      V1 = 2    WHEN '10' OR '11' OR '12'.
ENDCASE.

Yaroslav,
I_S_RKB1D-COMPID will never be filled for authorization user-exits (I_STEP = 0). Don't ask my why, I once raised this question to OSS and they replied it was never foreseen to work with authorization user-exits. God knows why, it's very unlogical and it wouldn't cost them a lot of work to get it working...
I could solve this problem by applying a little trick. In our queries we included a user-exit keydate variable. This will push the user-exit first in I_STEP = 1 mode where I_S_RKB1D-COMPID is filled. Then save the query name by exporting it to the ABAP-memory. Afterwards, the user exit with code for I_STEP = 0 will be processed and then you can import the query name from the ABAP memory.
I agree it sounds a little bit tricky but there is no better option I'm affraid.

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

How to find the user exits called at the time of posting the IDOC?

Hi,
Could anyone please how to find the user exits while posting a idoc?

Hi,
One way to ahive this is by, be ready with IDOC postiong,
then go to ST05 transaction and activate the trace after checking Table Buffer Trace.
Now post the IDOC then deactivate the trace.
Now come back to ST05 and display trace and search for calls starts with EXIT_.
Regards,
Manoj Kumar P

How to find the user exit for the T-code 'RECN'

Hi friends,
I have a requirement as-
In 'General Data with Fast Entry' tab of tcode 'RECN' there are 2 fields as contract conclusion date and contract end date.
Now, the requirement is as if entered contract end date is less than contract conclusion date then we have to display a warning message as "contract end date cannot be less than contract conclusion date".
So, how to find the right user exit to enter the code.
Plz help me.I will surely reward points.
Thanks,
Rishi

Hi Rishi,
If User exits and BAdi's are not provided, then you will for Enhancement points.
Procedure:
When you are in a particular transaction, Go to System--> status and you find the standard program of that particular screen. Go to SE38 and give that program name, display mode.
After that you click on the spiral icon there onthe top. Then,
You go to menu bar, Edit> Enhancement opitons> show implicit enhancement options.
You will be shown the points where you need to write the code.
For creating it you will go to Edit > Enhancement opitons> Create.
By this you will add some code in the standard programs.
Reward points if it helps you.
Cheers,
Swamy Kunche

How to see user exit code

hi,
i have one user exit name with me like EXIT_SAPLVxxxxx. how can i see it's code.
thks

Those user exits are build as function modules. Just goe to transaction SE37, put in the name and there you go. Double click on the include in the FM and you'll see the code. If the include doesn't exist this user exit has not yet been implemented.
Regards,
Michael

How to find out user exit for LI20

any one please tell me how can find user-exit for LI20
Regards,
Venkat

Well if you want to search user exits associated with the t-code LI20...
then go to se93, enter the t-code LI20->click on display-> go the program-> go to find next in the top menu (under Edit) and write "user_exit" and select "In the main program" and and click on continue... in case if there is any user exit; it will show you.
Regards,
Raman

How to debugg remodeling user exit code?

Similar Messages

Maybe you are looking for