How to Debugg the Cmod code in R3

Hi All,
I have written a code in CMOD to populate new fields for 2LIS_11_VASCL.
How do I debugg the code it in R3?
When I run the check for datasource in RSA3, it is not returning any records?
Simmi

you can set a break point in the code..or even in the extractor you have the option to enable the Debug..check box..
Go to the code..of include..double click on the line you want to place a break -point.

Similar Messages

  • How to delete the old code in the EXIT_SAPLRSAP_001

    Hi All,
    In R3 system, I wrote an exit for 2LIS_11_VAHDR  by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
    and can we create new project and can we assign to the Enhancement RSAP0001.
    Can anybody suggest me in this
    Thanks in advance......
    Narendra

    Hi Narendra,
    You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
    SE38>zxrsau01>change-->find out your data source
    Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
    If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
    Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
    Hope it helps
    Thanks
    Teja

  • How to use same CMOD code for 2 Diff. variableS?

    Experts,
    I have written some code under CMOD. Now, i have another query which i could use the same CODE, but diff. variable
    ( In the CMOD code, i am passing one User input variable ). For the 2nd query i have to pass different User Input variable.
    How OR what should i wright to tell CMOD, that IF its Query # 1 then use ABC variable and if Query # 2 then use XYZ .
    thanx

    Dear Hon Bon,
    Let us have a small example on ur scenario.
    Lets take the requirement as to calculate Month from Date. (In both the queries).
    Query 1: Input variable for Date is say  'ZDATE1'.
    Query 2: Input variable for Date is say  'ZDATE2'.
    Now let the CMOD variable be ZVAR_CALMONTH.
    when 'ZVAR_CALMONTH'.
        clear: lwa_var_rng,
               lwa_range.
        loop at i_t_var_range into lwa_var_rng where vnam = 'ZDATE1' or vnam = 'ZDATE2'.
          concatenate lwa_var_rng-low+0(4)
                      lwa_var_rng-low+4(2)
                 into lwa_range-low.
          lwa_range-sign = 'I'.
          lwa_range-opt  = 'EQ'.
          append lwa_range to e_t_range.
          clear lwa_range.
        endloop.
    Now when you execute the Query1,  the above code will work for 'ZDATE1' variable,
    if you execute the Query2,  the above code will work for 'ZDATE2' variable.
    So, the key point is,
    1. You need not worry about which query is getting executed. Whatever the query, the particular user entry variable of that query will be taken care.
    2. This method works only if the cmod variable (ZVAR_CALMONTH) is used in both the queries (Ofcourse its ur requirement).
    3. If queries have both the user entry variables then the cmod will work differently(it ll get data from both the user variables).
    You shall try ur code in the above example by replacing the code and the variable names and try playing around it.
    Hope this helps.
    Regards,
    Guru

  • Unable to debug/correct the CMOD code for a variable used in a query

    unable to debug/correct the CMOD code for a variable used in a query
    i am using the data in a DSO in a query and using a custom coding variable in that query , but this data not coming in that query ..
    can anyone suggest how to debug that cmod code for the variable?
    code is written in CMOD tocde for the variable.

    belowis the code that i have written for a custom coding for a variable
    *******Start***
    IF i_step = 2.
      CASE i_vnam.
        WHEN 'IC_COMPCD'.
         TYPES:       BEGIN OF gt_itab_DyAuthTable,
                           username  TYPE /bic/afiop_o1200-/BIC/IC_USER,
                           companycode TYPE /bic/afiop_o1200-COMP_CODE,
                      END OF gt_itab_DyAuthTable,
                      BEGIN OF gt_itab_Cocd_all,
                            companycode TYPE /BI0/MCOMP_CODE-COMP_CODE,
                      END OF gt_itab_Cocd_all.
          DATA: gi_itab_DyAuthTable TYPE STANDARD TABLE OF gt_itab_DyAuthTable,
                wa_itab_DyAuthTable TYPE gt_itab_DyAuthTable.
           DATA: gi_itab_Cocd_all TYPE STANDARD TABLE OF gt_itab_Cocd_all,
                wa_itab_Cocd_all TYPE gt_itab_Cocd_all.
          SELECT /BIC/IC_USER
                 COMP_CODE FROM /bic/afiop_o1200
            INTO CORRESPONDING FIELDS OF TABLE gi_itab_DyAuthTable
            WHERE /bic/ic_user = sy-uname.
          LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
            IF wa_itab_DyAuthTable-companycode EQ '*'
              OR
              wa_itab_DyAuthTable-companycode EQ ' '.
              SELECT COMP_CODE FROM /BI0/MCOMP_CODE
                  INTO CORRESPONDING FIELDS OF TABLE gi_itab_Cocd_all.
              LOOP AT gi_itab_Cocd_all INTO wa_itab_Cocd_all.
                l_s_range-low    = wa_itab_Cocd_all-companycode.
                l_s_range-sign   = 'I'.
                l_s_range-opt    = 'EQ'.
                APPEND l_s_range TO e_t_range.
              ENDLOOP.
          to exit the loop if any one value is */space/all for a user's compcode values
            EXIT.
            ENDIF.
          ENDLOOP.
           if control is here means, the comp codes values didnt have */space
              LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
                l_s_range-low    = wa_itab_DyAuthTable-companycode.
                l_s_range-sign   = 'I'.
                l_s_range-opt    = 'EQ'.
                APPEND l_s_range TO e_t_range.
              ENDLOOP.
      Endcase.
    Endif.

  • How to debugg the outbound idoc

    Hi all,
           I am adding one segment standard Invoic02 outbound idoc.
      Executing invoice number ,idoc automaticall y trigger and populate the data.
    1)problem is my new adding segment is not populated idoc level.
    2)I am testind idoc (WE19) showing a 02 error.
    3) How to debugg the outbound idoc.
    Thanks
    Sreddy

    Take a look at your outbound processing code (transaction WE41). When you double click on the entry you are using you can find the function module which is used to process the IDOC. Just set a breakpoint at the beginning of that function module and you can debug the creation of your outbound IDOC.
    Hope that helps,
    Michael

  • How to use the t-code vf31 tor taking print out of invoice

    Hi,
      How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
    venu

    Hi,
    Please find the steps
    Output type                     RD00
    Transmission medium             1
    Sort order                      01
    Processing mode                 1
    Please give the oppropriate fields,
    if the still error persists  check the configuration in NACE transaction code.
    thanks
    Kuntla

  • How to get the source code of  "com.sap.caf.eu.gp.example.tiimeoff.wd.creat

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    Hi,
    check [this|Re: Source of Time-off Request Project].
    Regards,
    Naga

  • How to find the source code of com.sap.caf.eu.gp.example.tiimeoff.wd.create

    Hi Frendz..
    I want to know how we can build a callable obj which have a two buttons those  r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject).
    I gone thru the Leave process(Time-Off process) which is very suitable for my requirment but in this app there r using predefined CO(com.sap.caf.eu.gp.example.tiimeoff.wd.create).How we see the source code of this predefined CO.
    Thanks in Advance
    Regards
    Rajesh

    not answered

  • How to locate the source code which populate the SO number?

    Hi,
    For example:
    In T-code: VA01
    Put your cusor on the screen field : Standard Order
    Then press F1, get the technical info of this field as below shows:
    Screen field     VBAK-VBELN
    Program name     SAPMV45A
    Screen no.       4001
    So my question is, how to locate the source code which exactly to populate the SO number into VBAK-VBELN by the system automaticallly.
    As assumed that the system is generate this kind of SO autuomatically, and its number range is defined in SPRO.
    I just want to find out the coding part which gengerate the SO number.
    Want to see the source code of that...
    How to find it???
    Thanks.

    Hi Deepak,
    Thanks for the info..
    But i think i am also know that.
    Questions is dont know how to find the KEY statements that exactlly to generate the number...
    Anyway, 2 points to you.

  • How to view the source code for Native Method

    hi
    i am using some native methods in to my code ;
    can anybody tell me how to view the source code for the same ;
    nik

    Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

  • How to read the source code

    Hi,
    I want to know how to read the source code of web dynpro java from the source folder i.e. without loading the project in NWDS. Please answer me as soon as possible.
    Thanks & Regards,
    Aniruddha

    Hi,
    If you are using DC's then you can find the .Java files in the path
    <project Name>\_comp\gen_wdp\packages\<Pacjage>\<ComponentName>\..
    In the above path you can find the Java files of the controllers.
    Thanks,
    Raju Bonagiri

  • How to get the source code of Java Concurrent Program?

    Hi,
    How to get the source code of Java Concurrent Program?
    Example
    Programe Name:Format Payment Instructions
    Executable:Format Payment Instructions
    Execution File Name:FDExtractAndFormatting
    Execution File Path:oracle.apps.iby.scheduler
    Thanks in advance,
    Senthil

    Go on Unix box at $JAVA_TOP/oracle/apps/iby/scheduler
    You will get class file FDExtractAndFormatting.
    Decompile it to get source code.
    Thanks, Avaneesh

  • How to get the source code of a PRT application in the portal

    Hi!
    Does anybody know how to get the source code of a PRT application in the portal?
    Thanks in advance,
    Celso

    Celso,
    If its Java-based code have a look at the properties of an iView that belongs to the application in question and copy the value of the Code Link parameter e.g. 'com.sap.pct.hcm.rc_vacancyrequestov.default'.
    Search the Portal installation directory under /j233/cluster/server/ for a .par.bak file of the same name, removing .default from the codelink parameter
    e.g. com.sap.pct.hcm.rc_vacancyrequestov.par.bak
    Copt this locally and import into Netweaver Developer Studio. You will have to decompilte the class files with a decompiler such as DJ Decompiler or Cavaj (search with Google).
    Cheers,
    Steve

  • How to get the source code of an HTML page in Text file Through J2EE

    How to get the source code of an HTML page in Text file Through J2EE?

    Huh? If you want something like your browser's "view source" command, simply use a URLConnection and read in the data from the URL in question. If the HTML page is instead locally on your machine, use a FileInputStream. There's no magic invovled either way.
    - Saish

  • How to get the source code of an HTML page in Text file Through java?

    How to get the source code of an HTML page in Text file Through java?
    I am coding an application.one module of that application is given below:
    The first part of the application is to connect our application to the existing HTML form.
    This module would make a connection with the HTML page. The HTML page contains the coding for the Form with various elements. The form may be a simple form with one or two fields or a complex one like the form for registering for a new Bank Account or new email account.
    The module will first connect through the HTML page and will fetch the HTML code into a Text File so that the code can be further processed.
    Could any body provide coding hint for that

    You're welcome. How about awarding them duke stars?
    edit: cheers!

Maybe you are looking for

  • Erratic EDI behavior?

    Experts, I have an Idoc which is an extension of type INVOIC. This extension has the segment E1EDK05, which contains document header conditions. The user-exit was coded such that this segment is not filled for two particular conditions, lets say z1 a

  • POI Reading Microsoft Word 2003 docs

    Anybody having success reading Microsoft Word 2003 documents using POI? I just tried it for the first time today. I've got a compound document with lots of pages and an embedded Excel spreadsheet. POI found seven DocumentEntries, but the bytes I extr

  • Issue iwth generic Datasource -Urgent Help

    HI All, I needed to create a generic DataSource through view . The view is created successfully however I have some dependant key figure in view such as Tips amount referring to MSEG(Referring Table ) _WAERS (Referred field name.) because of which I

  • Column should display comma seperated value.

    Hi All, Iam working on Reports6i. In my data model i have a query which gives some product names(only one column), i need to display those product names with a comma seperator. Just like Product1,Product2,.... Can anybody guide me as this is very urg

  • Purchasing iphoto v9.4.3 for mountain lion

    Hi- I have given up trying to upgrade my iphoto 9.3 to 9.4.3 for mountain lion.  I have tried (a) Apple-Software Updates... and (b) going directly to http://support.apple.com/kb/dl1650.  Neither works, The first one doesnt list the update as an optio