How to decide new window position?

Hi
I work a lot in Logic Pro X, but I think this question belongs in the Maverick OSX department.
Every time I open a plug-in window in Logic it defaults to the position in the upper left corner of my cinema display, forcing me to drag the window in center, where I can view best.
How can I tell the system that I want's the window to open in the center of the display and not in the upper left corner?
I have the same problem with Preview!
I go nuts to be forced to do the same thing over and over again!!!!

Hello,
You may disable the options for tab and new window in browser setting. For IE, Go to Tools-> Internet Options->General
Check the settings under tab section
In order to have the settings at global level, please check with network admin to disable the setting for all users.

Similar Messages

  • How to open new window and generate oracle report from apex

    Hi,
    I had created an application that generates PDF files using Oracle Reports, following this Guide.
    http://www.oracle.com/technology/products/database/application_express/howtos/howto_integrate_oracle_reports.html
    And I followed 'Advanced Technique', so that users can't generate PDF file by changing URL and parameters. This is done for security reasons.
    But in this tutorial, when 'Go' button is pressed, the PDF file is displayed on the same window of apex application. If so, user might close the window by mistake. In order to avoid this, another window have to be opened.
    So, I put this code in the BRANCH - URL Target. (Note that this is not in Optional URL Redirect in the button property, but the branch which is called by the button.)
    javascript:popupURL('&REPORTS_URL.quotation&P2100_REP_JOB_ID.')
    But if the button is pressed, I get this error.
    ERR-1777: Page 2100 provided no page to branch to. Please report this error to your application administrator.
    Restart Application
    If I put the code 'javascritpt ....' in the Optional URL Redirect, another window opens successfully, but the Process to generate report job is not executed.
    Does anyone know how to open new window from the Branch in this case?

    G'day Shohei,
    Try putting your javascript into your plsql process using the htp.p(); procedure.
    For example, something along these lines should do it:
    BEGIN
    -- Your other process code goes here...
    htp.p('<script type="javascript/text">');
    htp.p('popupURL("&REPORTS_URL.quotation&P2100_REP_JOB_ID.")');
    htp.p('</script>');
    END;
    What happens is the javascript is browser based whereas your plsql process is server based and so if you put the javascript into your button item Optional URL Redirect it is executed prior to getting to the page plsql process and therefore it will never execute the process. When you have it in your branch which normally follows the processes, control has been handed to the server and the javascript cannot be executed and so your page throws the error "Page 2100 provided no page to branch to"... By "seeding" the plsql process with the embedded javascript in the htp.p() procedure you can achieve the desired result. You could also have it as a separate process also as long as it is sequenced correctly to follow your other process.
    HTH
    Cheers,
    Mike

  • How to open new window 640x520

    When a user clicks on a button I want a 640 x 520 new window
    to open, preferably without the browser address bar. You can see
    the problem I'm having using target "blank" if you go to
    http://movingcircles.com/ and
    click on the first button (for Grand Entrance.) BTW if you go
    there, please let me know how the flash file is playing for you.
    Thanks.

    Hi David --
    I've used a DW extension called "Popup Link" with great
    success. You can
    specify not only the size of the pop-up, but you can also
    position it on the
    screen as well as determine which window attributes (address
    toolbar, status
    bar, etc.) are displayed.
    You can find it here:
    http://www.flevooware.nl/dreamweaver/extdetails.asp?extID=8
    HTH
    John
    "David Mainstreet" <[email protected]> wrote
    in message
    news:fca10s$399$[email protected]..
    > When a user clicks on a button I want a 640 x 520 new
    window to open,
    > preferably without the browser address bar. You can see
    the problem I'm
    > having
    > using target "blank" if you go to
    http://movingcircles.com/ and
    click on
    > the
    > first button (for Grand Entrance.) BTW if you go there,
    please let me
    > know how
    > the flash file is playing for you. Thanks.
    >

  • How to pen new window while redirecting to a page

    Hi,
    I have a jsppage 1,jsppage 2 and aspPage. In jsp2 I am getting the
    values from jsp1 using request.getParameter("hhhh").Once I get
    all values in jsp2 , as soon as I got the values I need to redirect to asp from jsp2.
    I don't have any form or any button in jsp2.When I do submit in jsp1,
    immediately it has to open asp page in new window. My question is how
    I open the asp in new window in this redirection case .....?.
    I tried this way but not working ...
    WebsiteUtils.sendRedirect(request,response,window.open("ASP page"));
    I know if I have submit button in jsp2 I can write a javascriptfunction
    to opennew window but here the case is different....
    Appreciate your reply.
    Thanks

    On jsppage1, instead of using a from submit button, you can create abutton and write th onClick as
    <input type="button" value="OK" onClick="window.open('jsppage2.jsp','win2');">
    Now in Jsppage2.jsp, after doing all the processing, use sendRedirect to call jsppage3.jsp.
    Since jsppage2 is never being displayed, page3 will bw the one which will be shown in the new window opened by the name win2 on onClick.
    If I have understood your requirement correctly, then this should work for you as I have tried it out.

  • How to get New Window without Variable Entry screen from one Web Template?

    Hi Experts,
    I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
    Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
    I need to avoid this "Rerun" feature in New Window.
    Kindly suggest me how to achieve this..
    Full points will be given.
    Thanks
    Jay Jay

    Hi Thanks.
    Even I'm also trying for the same scenario only.
    Actually I have 2 Web Templates.
    In First Template I have 2 Charts and 2 Zoom buttons for each.
    While I running the 1 Template, i give an Value in the  Variable screen of First Web Template.
    If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
    (Since, U have an Mandatory field in Second Template u were not faced this requirment.)
    Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
    Kindly help me in this issue.
    Thanks in advance.

  • How to achieve New Window requirement from One Web Template?

    Hi Experts,
    I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
    Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
    I need to avoid this "Rerun" feature in New Window.
    Kindly suggest me how to achieve this..
    Full points will be given.
    Thanks
    Jay Jay

    Hi Thanks.
    Even I'm also trying for the same scenario only.
    Actually I have 2 Web Templates.
    In First Template I have 2 Charts and 2 Zoom buttons for each.
    While I running the 1 Template, i give an Value in the  Variable screen of First Web Template.
    If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
    (Since, U have an Mandatory field in Second Template u were not faced this requirment.)
    Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
    Kindly help me in this issue.
    Thanks in advance.

  • Contact Form (php)  - how to prevent new window...

    My contact form works just fine, however, I currently have
    the target set to "_blank" which is not what I want.
    Rather than opening the .php file open in a new window, I
    just want to go to a new frame (labeled "success" or "error")
    within my flash file (which currently works fine)
    So, my question is how do I send the form information to my
    php file WITHOUT having to open a new window outside of my flash
    file since I'm sending the user to new frame instead.
    FYI: I've already tried removing "_blank" but it still opens
    the php file in a new browser window.
    My code below:
    on (release){
    var my_lv:LoadVars = new LoadVars();
    my_lv.fullName = fullName_txt.text;
    my_lv.email = email_txt.text;
    my_lv.emailMessage = emailMessage_txt.text;
    if(fullName_txt.text != "" && email_txt.text != ""
    && emailMessage_txt.text != "") {
    my_lv.send("contact.php","_blank","POST");
    gotoAndStop("success");
    else {
    gotoAndStop("error");
    Any help is greatly appreciated.
    Yvonne

    Thanks for your help, Zupko.
    I tried your suggestion but I'm still experiencing the same
    problem. A new window still opens. Perhaps I'm doing something
    wrong?
    My code with your suggestion below:
    on (release){
    var my_lv:LoadVars = new LoadVars();
    my_lv.fullName = fullName_txt.text;
    my_lv.email = email_txt.text;
    my_lv.emailMessage = emailMessage_txt.text;
    if(fullName_txt.text != "" && email_txt.text != ""
    && emailMessage_txt.text != "") {
    loadVariables("contact.php","POST");
    gotoAndStop("success");
    else {
    gotoAndStop("error");
    Your help is very much appreciated!
    Yvonne

  • How to pop new window in running main window

    i have to popup a sub windopw in main window....and i need to plot common data to be printed on front panal...
    i am usind daq ...can i share same daq in main and sub window...hao??or can i share some calculated value in main and sub window of labview.,,pleasehelp me fast

    As KoenR has said - you can use SubVIs and set them to 'Show front panel when called' which will make them show as new windows in your application.
    As for sharing the data, you could use something like a notifier (under synchronisation) for broadcasting the data to the SubVI. If you create the notifier in your main application, with a send notification VI and then pass the reference to the notifier into the SubVI when you call it which has a 'wait on notification' VI it will then receive the data form the main loop. 
    If you look in the LabVIEW examples under 'notifiers' you will find 'Pass Data with Notifiers' which demonstrates how to use notifiers to pass data to SubVIs.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • How to open new window

    I have developed a JTable. What I need to do next is to have listeners for each of the cells in the table such that when the cell is double clicked, a new window should pop up.
    What listener needs to be implemented for this? Will the TableModelListener work?
    Any sample code, anyone?

    Add a MouseListener to the JTable. Look through some of the methods in the JTable class to see how you can find which cell was clicked.
    http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JTable.html

  • How to open new window when i press submit button/submit button.

    Hi,
    When i press a button, I need to capture an item value in current from and I need to pass that value to another form. The child form should open in the new form.
    For that Iam using the java script, But when i use the java script my page is not able to re-size, scroll bars address bar and menu bars are missing. if any one did this kind of requirment please share with me how to solve this issue.
    Thanks

    Re: How to show Popup window in OAF on click of a button
    Thanks
    --Anil
    http://oracleanil.blogspot.com/

  • How to call new window and text element without changing print program

    Hi Friends,
       I have requirement like this . i have a standard print prog and custom form. i want add 2 to 3 extra windows in the form and i have to print some data. but how can v do this with out changing the print program. i know that to pick new fields through subroutines. but how can v call new windows and new text elements with out changing the print program.
    usually in the print program we write as follows.
    write_form
    window = 'HEADER'
    textelemtn = 'HEADER'
    can we accomplish this one also through subroutines or any other way is there.
    can any one pls suggest this.
    Thanks in advance.
    Rahul

    u  copy the standard print program and make custom program.
    write your own codes in it.
    assign this program in the place of standard print program.
    Reward points, if helpful.

  • How to re-center window positions

    Hi folks,
    I switched from 19" to a 27" screen. How can I tell LR to re-center it's window positions?
    The windos (like the Export window) are still on the old place (centered for 19").
    BRGDS!

    Just drag the top menu bar for either Lightroom or the Menu window. Or the bottom corner.
    I'm not sure what you are after though or where you are startibng from.........

  • How to creat new window?

    Hello, got a question, is it possible to creat new window in nokia lumia 800 (check the pic what i mean).
    Solved!
    Go to Solution.
    Attachments:
    nokia-lumia-800-2.jpg ‏33 KB

    Unfortunately no. 

  • How to open new window with required size when clicking on image in a table

    Hi,
    There is an image column in advanced table. i want to open new window with required parameters(size, toolbar, status bar,etc..) and with that transaction context.
    can any one help plzzzzzzzz?
    Thanks
    Raju

    You can also use OAF js function to open modal pop up:
    openWindow(self, '<url>','longTipWin', {width:900, height:400}, true); return false;
    --Mukul                                                                                                                                                                                                                                                                                                                                   

  • How to open new window in UIX page

    I'm using UIX for view layer. I have text input in the UIX form. When I click on a button, I want to open a new window with the URL built using the value from the input. I want to do it using javascript. Is it possible with UIX?

    Hi Krishnamoorthy,
    Look out the LovXXXX components demo in uix.
    See <script> demo of component guide. This should help you clearly understand the functionalities.
    See documentation of above UIX components
    Like providing handlers to HTML elements, you can attach event handlers to UIX components too. You can attach event handlers on onClick, onMouseOver,... on UIX components just as you would do in HTML.
    http://www.oracle.com/technology/sample_code/products/jdev/index.html
    This link could be of some help to you.
    Thanks,
    Vijay Venkataraman

Maybe you are looking for