How to decide the number of project for CHARM?

We want to use only one project for all normal change requests(CR).
But some CRs are very quickly moved into the PRD while some others are slower.
Should we create 2 projects : one for fast moving corrections and another for slower ones?
Above is for normal corrections only. The shortcoming of above plan is that it hard to know the CR is going to be fast or not.
U r gent correction: We have a dedicated project for u r gent corrections which are usually moving very fast.
Could you tell us your practice on this?
Thanks and regards.

Dear Sneha:
So roughly speaking, 3 projects are needed for CHARM:
one for fast moving normal corrections
one for slow moving normal corrections
one for u r gent corrections
Would you please confirm?
Thanks!

Similar Messages

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

How to check the number of licences for ODI

Hi,
I would like to know , how to check the number of licences exists for my current OID.
ODI Version: 11.1.1

ODI licensing is similar to Oracle DB licensing. Its licensed by the number of cores in your target database.
So, count the number of CPUs in your target box. Multiply them by the core factor (x86 vs sparc, etc) and then match with the paperwork you have :D

How to increase the number of rows for Entry via Excel in SSM ?

hello
we are facing a scenario where we need to enter the target data for more than 14000 fields.So when we open the excel ad in and trying to upload, it is accepting data for only 500 fields and the rest are not getting displayed.
The condition is that we have to enter data via Entry and Approval and not using a procedure and multiple metric sets is not a feasible option since the number of records is large. How can the number of rows in excel be increased ?
Vijay

Hi Bob
I am facing another problem....
we have designed our model in such a way that we built it using normal procedures but the target values have to be entered using entry and Approval via Excel ad-in..
the problem we are facing is that if we select both the actual and the target measures to load the data via Excel login then the column TARGET is getting greyed out. When we build the same model using cube builder , the column TARGET is not getting greyed out and we are able to enter data there.
Is there any setting changes we need to make inorder to make the Entry and Approval process via Excel behave the same way when the model is built using the Cube builder ? Are there any new notes or a newer version of Excel ad in to resolve this ?
Vijay

How to set the number of sockets for batch processing at runtime?

Hello all,
I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
Thanks and Regards
Madhu Srinivasan.

Hi Madhu,
You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
Hope this helps,
Nick

How to set the number of averages for doing octave analysis

Hi
I am using a 4472 DAQ for continuously acquiring time domain signal and doing octave band analysis using Sound and vibration tool kit. How can we set the number of averages while doing the Octave analysis. All the other FFT vi like FRF, Auto Spectrum, Cross Spectrum have an option for setting the number of averages and then the vi runs for those many averages and it stops. How this same logic can be applied while doing octave analysis.
Regards,
Ankit

Hi Ankit,
You may want to consider using the VI in a for loop. By wiring the "number of averages you wish to complete" to the count terminal ("N'), you can control how many times the VI runs.
Hope this helps,
Jennifer O.

How to change the number apple has for me

I'm stuck :-(
I'm overseas.
I was in the Netherlands and now I am in Austria - I have an Austrian sim in my phone - yes I can receive texts on it.
I'm upgrading to iOS8
In iCloud it wants me to enter my pin and then the code sent to my phone.
It says it is sending it to my Dutch Number but I need to change this to my Austrian number to receive the SMS.
I have followed the links "don't have access to this phone?"
- but they won't let me enter anything other than a US phone number - and in fact I cannot see my Dutch number in there anywhere either ?!
I cannot for the life of me remember how I entered the Dutch one or maybe I could change it to the Austrian one now!
- more to the point - how will I change this back to my US number when I return?
HELP !

update - maybe helpful....
I'm told to:
Go to My Apple ID.
Select Manage your Apple ID and sign in.
Select Password and Security.
In the Trusted Devices section, select Manage.
To add a number, select Add an SMS-capable phone number.
To remove a number, select Remove next to the verified phone number associated with your Apple ID.
It's all good down to step 3 but in there I do not see a "Trusted Devices" section - it only talks about 2 step verification, security questions and my birthday.

How to use the same UI Project for differents HumanTask's in BPM 11gR1

When I define a User interaction activity in my Oracle BPM 11gR1 Process and associate a Human Task to it. It generates a new project to hold all my forms. Anyone knows if it's possible to use this same project for different Human Task's ?

After you generate the UI project for your first human task, you can right click on the project in JDeveloper and select "New", click on the "All Technologies Tab", then "JSF" -> "ADF Task Flow Based on Human Task". Then browse to the .task file from your BPMN/composite project.

How to reduce the number of bytes for a picture

I want to reduce the number of bytes used for a picture to be sent to a site like Ebay or craigslist. I son't see any options in Iphoto for this purpose.

You can do it in Preview.
Open the image in Preview. Under Tools, click Adjust Size.
Scale it down to the smallest acceptable size (the website should give a suggested resolution).
Then go to File -> Export, save it as a Jpeg.
Smaller size image means smaller file size.

How to decide the number of threads?

Dear all,
Suppose we have a multi-thread application, and we know that each thread is doing the same kind of work. What is the reasonable number of threads that we should set at begining.
It seems that a thread is expensive, so we should use only 1 thread. (wrong)
It seems that we should use 100000000000 threads. (wrong)
I would like to know your opnion about the above questions.
Regards.
Pengyou

pengyou wrote:
Thanks for the two answers.
In fact, I have made a crawler to crawl internet sites. I would like to know in practice should I:
1. Run the application to crawl the Internet site one by one;
2. Use multi-threads to crawl n sites in prarallel; (If one thread failed down, what to do?);
3. Run the application n times to crawl n sites.You will likely be spending a bunch of time in blocking I/O, so should gain a bunch by adding multiple threads. However, please be nice to the web hosts:
- Put all requests to the same domain into a single thread. This prevents your crawler from stealing too much bandwidth from the web host, making it harder for other real live people from using the site. Some sites will actually detect such hits and treat them as attacks and block them. One way to make sure you don't make too many simultaneous requests to the same domain would be to run all of a domain's requests into a single thread.
- To get the right amount of Threads, you will need to profile. Run the crawler with different amount of threads and see what settings make the best use of CPU time (fill CPU time to nearly 100%) without excessive thread switching.
How to handle failed threads? I would suggest using a Thread Pool (ThreadPoolExecutorService) and let the thread pool handle thread generation / death. You would have to make sure your code handles exceptions intelligently, and synchronizes properly still.

How To get the number of request's for a single Composite Application

Hi can any body tell how to get the number requst's for a single composite application.
Thanks
Mani

Hi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay

The number of reloads for the SQL statements

Hi,
in 10g R2, how to see the number of reloads for the SQL statements ? Any query ? Which value is high ? Which valu is low ?
Thanks.

thanks all.
It was a test question for 1Z0-042 exam as follows :
The users on your SALESDB are complaining of slow response to their queries. Using the SQL Tuning Advisor, you determine
that the SQL statements are using the best optimization plan. Querying the dynamic views, you see that the number of reloads
for the SQL statements is high, which can cause performance degradation.
Which component of the SGA should you resize to reduce the number of reloads of the SQL statements?
Answer :
shared poolThen I wonder how to see the number of reloads for the SQL ?

How do we decide the number of data base servers and application servers ?

Dear Gurus,
How do we decide the number of data base servers and application servers in BW ?
How does this number help in data load balance and reporting needs ?
Any hard n fast rule in the number of servers ?
Regards
Mohan

Hi Mohan,
Check the number of application server in the T-code SM66.... and also u can check the it in Sm50 on appplication server basiss./.
From Sm37 u can see the application server Push button.. if u click on that also.. u can see the number of application servers in the system..
Get into the individual application server and check how many Dialogue and background WP's are free,,
If u see that the considerable number of WP are free(Waiting for task).. then u can shedule the loads..
If most of the WP are busy then u need to wait to trigger ur loads to maintain the load balancing..
If one Application server is too busy then u can check the other Application Servers in the systems..
And u can shedule the loads on a specific application sever level as well using the PC..
Thanks
I hope this is clear to u..
Assign points if this helps

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

How to find the number of references created for a given object ??

How to find the number of references created for a given object in a big application environment.
That means, if i give any object name (of my application) as input, then how can i find the[b] number of references created for that particular object ??

Please do not post the same question multiple times.
As for your original question, there is no direct way to do it.
Especially not the way you phrased it,
since objects don't have "names".
Applications also don't have "names".
They have classes and instances.
Also, there are 2 related issues, and I'm not sure which one is the one you asked.
#1. Finding the number of references to the same object.
Eg.
Map<String,String> a = new HashMap<String,String>();
Map<String,String> b = new HashMap<String,String>();
Map<String,String> c = a;In this case, there are only 2 objects.
The first object has (at least) 2 references pointing to it.
The second object has (at least) 1 reference pointing to it.
(There may be more, if the HashMap library keeps
references to these things, or if the HashMap object has
some internal cyclic references...)
If you're asking this, then it can't be done.
It's an active research topic in universities
and software research labs, called "alias analysis".
Type it in google, and you'll see people are working hard
and having little success so far.
#2. Finding the number of instances created from a class.
In this case, what you have to do is to add a counter to
the constructor of the class. Every time an object is constructed,
you increment the counter. Like this:
   class MyClass
       public static int counter = 0;
       public MyClass( ) { counter++; }
    // Then later in your program, you can do this:
    MyClass a = new MyClass();
    MyClass b = new MyClass();
    System.out.println(MyClass.counter); // It should show 2Note: you won't be able to do this to every class in the system.
For every class you care about, you have to modify its constructor.
Also: when an object is deleted, you won't always know it
(and thus you won't always be able to decrement the counter).
Finalizers cannot always work (read Joshua Bloch's
"Effective Java" book if you don't believe me), but basically
(1) finalizers will not always be called, and
(2) finalizers can sometimes cause objects to not be deleted,
and thus the JVM will run out of memory and crash

How to decide the number of project for CHARM?

Similar Messages

Maybe you are looking for