How to declare internal table in SMARTFORM
Hi experts,
I have an Internal table in my program and I want to declare in the smartform as well. How and where can I declare? Should I use global definitions and tpyes tab? How can I pass the content of the internal table to the smartform?
Click Global Defiitions
In TYPES :
TYPES : BEGIN OF gty_add,
name1 TYPE ad_name1, " name1
city1 TYPE ad_city1, " City
country TYPE adrc-country, "Coutnry
post_code1 TYPE ad_pstcd1, " post code
street TYPE ad_street, " street
house_num1 TYPE ad_hsnm1, " house number
tel_number TYPE ad_tlnmbr1," tele number
END OF gty_add.
In Global DATA
GT_ADD TYPE TABLE OF GTY_ADD ( Internal table)
WA_ADD TYPE GTY_ADD ( work area)
Similar Messages
-
How to Define Internal Table in Smartform
Hello,
I have some problem on define Internal Table in Smartform
I define a Temp_IT_Gen Type LBBIL_IT_GEN in Global Definiations
but i find that it is not available for me to append data into it,
the error message is Temp_IT_Gen is not a Internal Table - the Occurs n Specification is missing
so how can i solve it?
i want to use the internal table in the hold program.
Thanks a lot in advance.Hi,
First U define the Table type in 'TYPES' tab of Global Definitions and then assing that table type to Internal table in 'Global Data' tab.
Eg:
define the Table Type like below in TYPES tab.
TYPES:BEGIN OF ty_TEMP.
INCLUDE STRUCTURE XXXXXXX.
TYPES:END OF ty_TEMP.
TYPES: g_t_temp TYPE STANDARD TABLE OF ty_TEMP .
Now, define the Internal table in Global Data tab like below:
Variable Name Type assignment Associated Type
G_T_ITEM_1 TYPE G_T_TEMP
NOTE: whatever U define in Global Definitions can be used only in SMARTFORM, if u want to use it in Program U must define in Form Interface.
Hope it helps!!
Rgds,
Pavan -
How to define internal table in smartform(urgent)
Hi all,
How can i define a internal table <b>with header line </b> in global data ???
i defined like
In Types,
TYPES : BEGIN OF T_XVBPLP2 ,
VENUM(10),
VEPOS(10),
POSNR(6),
VEMNG LIKE LIPS-LFIMG,
MATNR LIKE LIPS-MATNR,
CHARG LIKE LIPS-CHARG,
ARKTX LIKE LIPS-ARKTX,
END OF T_XVBPLP2.
TYPES: T_XVBPLP TYPE TABLE OF T_XVBPLP2.
In Global Data,
T_XVBPLP TYPE T_XVBPLP.
Still, i am getting error message that, Internal table is not with header line.
can u plz give me some examples , to define internal table with header line in smartform ???
any correct answers will be rewarded??
Regards
pabitraHi
define WA_ITAB in Global variables
variable name type assin associated type
t_text like zstc_text
you cannot define a internal table with header line in SMART Forms. Declare a internal table and a work area separately both referring to the same structure.
Then you can use the work area. So, in this case WA_ITAB is declared as a global variable of TYPE ZSTC_TEXT.
Regards
Pavan -
HR abap : how to declare internal table to fetch data from 0585 infotype
Hi all ,
I am able to fetch the data from pa0585 infotype for set of employee no , but the problem is as the fields in pa0585 (like Contr to ULIP , NSC , Medical Treatment,Contribution to Certain Pension Funds so on ..) will be changed dynamically and will be displayed based on the amount value in descending order iam not able to store the values of the fileds into internal table . I dont understand how to declare the internal table ..Please help in if u have solved this kind of problem.
I shld get the output in this way ...
Emp No Name Medical treatment Contr to ULIP ....... so on
101 abc 10000 150000 .......so on
102 xyz 12000 150000 .......so on
My header shld be fixed and I shld display values in this way .... I can use write statement to display directly .
Thanks ....Hi
Decalre INFOTYPE
Goto SE37 - Find FM -
READINFOTYPE* -
How to declare internal table in BADI with variable name beginning with 0..
Gurus,
How to declare an internal table within a BADI. I have to implement a BADI UC_TASK_CUSTOM for BCS to BW load and there i have to declare an internal table like:
TYPES: BEGIN OF t_cube_data,
0cs_version TYPE /bi0/oics_version,
0sem_cgcomp TYPE /bi0/oisem_cgcomp,
bcs_vers TYPE /bic/oibcs_vers,
bcs_lcus TYPE /bic/oibcs_lcus,
bcs_ldch TYPE /bic/oibcs_ldch,
bcs_invcom TYPE /bi0/oibcs_invcom,
bcs_litem TYPE /bic/oibcs_litem,
bcs_llob TYPE /bic/oibcs_llob,
bcs_lmay TYPE /bic/oibcs_lmay,
0move_type TYPE /bi0/oimove_type,
pcompany TYPE /bi0/oipcompany,
bcs_lprg TYPE /bic/oibcs_lprg,
figlxref3 TYPE /bic/oifiglxref3,
fiscyear TYPE /bi0/oifiscyear,
fiscper3 TYPE /bi0/oifiscper3,
fiscvarnt TYPE /bi0/oifiscvarnt,
curkey_gc TYPE /bi0/oicurkey_gc,
unit TYPE /bi0/oiunit,
cs_trn_gc TYPE /bi0/oics_trn_gc,
cs_trn_qty TYPE /bi0/oics_trn_qty,
END OF t_cube_data
But with this declaration it gives a error saying that u cannot have a variable beginning with 0...like 0cs_version....
but i have to do it for my functionality to wrk...
Please help me do it....
how can i declare a internal table that allows me to have variable names that start with 0....
Please help....Its URGENT....
Thanks
SamMurali,
I need to have 0 before the variable name in the declaration of the internal table....how can i attain that....
Please suggest...
Thanks
Sam -
Declaring an internal table in smartform
hi,
can anyone tell how to declare internal table in smartform.
the internal table contains fields from 2 or more data dictionary tables(eg.kna1
and adrc). after this from the print program(internal table containing data in print
program) internal table should be passed to the smartform.
thanks.hi laxya,
if u want to pass the data from internal table in print program to Smartform.. there is only way.. that is using form interface..
1. goto se11, create a structure same as the itab in the print program.ex. <b>z_itab</b>
2. create line type... se11>select radio button-DATA type><b>z_it_itab</b> >press create>then select>TABLE Type> then entrer some text--> in the line type Field in giveth Str name u have created in STEP 1. activate it.
3. got SMARTFORMS-> form inteface>tables tabe--> give some name ex <b>IT_tab type z_it_itab</b>.
then acivate it.. then in the driver progam pass this table data.
Exapmpel
CALL FUNCTION fp_v_fm_name
EXPORTING
archive_index = toa_dara
archive_parameters = arc_params
control_parameters = fp_st_control_parameters
user_settings = space
output_options = fp_st_output_options
wa_vbdkr = fp_st_vbdkr
IMPORTING
job_output_info = l_it_ssfcrescl
job_output_options = l_it_ssfcresop
TABLES
<b> IT_tab = z_it_itab (or table in driver program)</b>
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Another way is cteate a type in Globaldifination-->types tab..
ex:
types: begin of ty_itab,
matnr type matnr,
meins type meins
vrkme type vrkme,
end of ty_itab,
ty_it_itab type standard table of ty_itab.
then GLOBAL DIFINATION>GLOBAL DATA TAB>IT)ITAB TYPE TY_IT_ITAB.
BUT In this u can't pass the data from the print Program.. if u want to populate data in to this table... u have to write the Select query in the GLOBAL DIFINATIONS-->INITILIZATIONS TAB.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
Naresh Reddy -
How to Import customized internal table to smartform from Print Program
Hi Gurus,
I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
With regards,
S.SaravananThere is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
Regards,
Raymond -
How to Pass internal table from a program to Samrt form
Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
PraveenHai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b. -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
How to populate internal table field with text data?
Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test, IO Test 1, CHAR, 20
ZEA_IO2, CHA, IO Test, IO Test 2, CHAR, 20
Here is the Code:
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = SPACE
HEADER_LENGTH = 0
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
I appreciate your help.
Regards,
MauI have used tab delimited file.
Here are file contents
io_name io_type io_txsht io_txlng io_datatype io_length
ZEA_IO1 CHA IO Test IO Test 1 CHAR 20
ZEA_IO2 CHA IO Test IO Test 2 CHAR 20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish -
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
Passing internal tables into smartforms
Hi All,
I am testing a smartform for PO. But the smartform is already designed and it has two internal tables of type EKKO and EKPO. When i run the smartform its displaying the layout correctly but with no data ,which is true as the two internal tables have no data. So i want to fill those two internal tables based on the purchase order number/ numbers. So that i can test the smartform with those purchase order numbers.
I want to create a parameter / select option in smartform so that when we enter the PO number those internal tables will be filled. How to create those options in the smartform.
If i have to create through an ABAP program then i want to know how to pass those two internal tables to smartform. (Shall i have to call the FM couple of times and then pass those two internal tables).
Thanks in AdvanceYou fill the tables in the print program and pass the tables to the SmartForm function module under the tables section. See the FM call below (CALL FUNCTION lf_fm_name) and note that I am only passing in one internal table. If you wish you may pass in more than one table.
*& Form smartform_print
* text
* --> p1 text
* <-- p2 text
FORM smartform_print .
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: lf_formname TYPE tdsfname.
DATA: ls_addr_key LIKE addr_key.
PERFORM set_print_param USING ls_addr_key
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
retcode.
*Get the Smart Form name.
IF NOT tnapr-sform IS INITIAL.
lf_formname = tnapr-sform.
ELSE.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF vbdkr-vkorg = '0035'.
IF w_regio = 'QC'.
tnapr-fonam = 'ZPCC_INVOICE_FR'.
ENDIF.
ENDIF.
* IF NOT tnapr-sform IS INITIAL.
* lf_formname = tnapr-sform.
* ELSE.
* MESSAGE e001(/smb40/ssfcomposer).
* ENDIF.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = lf_formname
* variant = ' '
* direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
* error handling
retcode = sy-subrc.
IF sy-subrc = 1.
MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF sy-subrc = 2.
MESSAGE e002(/smb40/ssfcomposer).
ENDIF.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
EXPORTING
archive_index = toa_dara
* ARCHIVE_INDEX_TAB =
archive_parameters = arc_params
control_parameters = ls_control_param
* MAIL_APPL_OBJ =
mail_recipient = ls_recipient
mail_sender = ls_sender
output_options = ls_composer_param
user_settings = ' '
vbdkr = vbdkr
temp_jmval = temp_jmval
temp_agval = temp_agval
w_ship = w_ship
w_ktgrd = w_ktgrd
likp = likp
w_trlrnbr = w_trlrnbr
w_sealnbr = w_sealnbr
w_booknbr = w_booknbr
w_lc = w_lc
w_shippoint = w_shippoint
billto_fedid = billto_fedid
soldto_fedid = soldto_fedid
shipto_fedid = shipto_fedid
vbco3 = vbco3
w_z4_address = w_z4_address
w_stawn = w_stawn
w_herkl = w_herkl
new_rate = new_rate
vblkp = vblkp
TABLES
vbdpr = tvbdpr
* t_containers = t_containers
* tdomvd = tkomvd
* da_xfplt = da_xfplt
* payment_split = payment_split
* komk = komk
* frt_conditions = frt_conditions
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
retcode = sy-subrc.
PERFORM protocol_update.
* get SmartForm protocoll and store it in the NAST protocoll
PERFORM add_smfrm_prot.
ENDIF.
ENDFORM. " smartform_print
Davis -
How to convert internal table data to PDF format
HI,
I have an internal table data having one field with 255 chars. length.I want to send that intenal table data as attachemnt with external mail. i am thinking of converting that data into PDF format and use the FM to send the mail. How to convert internal table data to PDF format.
KishoreIn which format is your data in the internal table currently. Is it returned by a smartform/script or its just data fetched from some database table into an internal table. Since its obvious that the data should appear in the PDF with some Layout, you should be using smartform to format the data properly. See the Link
Smartform to PDF to EMAIL
This shows convertion of smartform to pdf and send it through email
Regards,
Abhishek -
How to fill internal table with selection screen field.
Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
matnr TYPE matnr,
END OF t_matnr,
BEGIN OF t_vbeln,
vbeln TYPE vbeln,
END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
wa_vbeln-vbeln = s_vbeln-low.
APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab -
How to covvert internal table data to XML file?
Hi,
Do u have material on ABAP with XML?
and how to convert internal table to XML?
Thanks and Regards,
ArpitaCheck below links:
XML DOM Processing in ABAP part II - Convert an XML file into an ABAP table using SAP DOM Approach.
Re: include a structure in a TYPES declaration
Thanks and Regards,
Maybe you are looking for
-
Copy(string1, string2)
Hi, In Forms pl/sql you can use this command to copy between two strings, where you can dybnamically build the string names. It doesn't seem to be in database pl/sql, anyone know how to do this in database pl/sql please ?????? TIA Tony
-
Course details and certification Path
Hi Experts, i have quite a few yrs of exp with SAP BW. Now i want to a certification and iam wondering what to do and how to do? I would appreciate if some one could guide me on 1. The course 2. Appropriate certification and 3. Path to certification
-
Share button in iMovie does not work, why?
I created a movie but am unable to store this nor can I share this, any idea or updates please
-
hello! i tried to install OS5 in my 1st gen IPAD (16gb) and it froze in the process. My IPad still runs normally (on OS 4) EXCEPT itunes cannot recognize, sync or even charge my IPad!
-
How to install Webcrawler search form?
On Webcrawler website, instruction to create a Webcrawler search banner, a code is to be copied and pasted into HTML. Where and what is HTML? == Operating system == Windows XP