How to declare ranges on ECC6.0
Hi All,
i have probelm with the ranges statement in ECC 6.0 i have declared the renages like below.
RANGES: RA_BZOBJ FOR KEKO_WA-BZOBJ.
Using like this:
RA_BZOBJ-SIGN = C_INCL.
RA_BZOBJ-OPTION = C_EQ.
RA_BZOBJ-LOW = WA_KEKO_DATA-BZOBJ.
APPEND RA_BZOBJ.
But SLIN throwing errors for this. So please let me know or give one example for ranges in ECC 6.0
Mant Thanks
Raghu.
Hi...
In ECC 6.0 Declaring internal table with Header line will give errors in SLIN.
Ranges will create a Header line always.
So ..Try this way.
Eg:
<b>Data : r_date like Range of Sy-datum.
dATA : WA LIKE LINE OF R_DATE.
WA-sign = 'I'.
WA-LOW = SY-DATUM - 1.
WA-HIGH = SY-DATUM.
APPEND WA TO R_DATE.</b>
Similar Messages
-
HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
HOW TO DESIGN RANGE SELECTION IN MODULE PULL LIKE SELECT-OPTION.
how can we add range selection in screen painter.
regards.Hi,
create two input fields and a push button like select option in the screeen.
Try checking this logic
<b>Program:</b>
<b>ranges</b> ra_matnr for mara-matnr.
<b>Layout field name declaration:</b>
Give the low field name as ra_range-low
and high field name as ra_range-high.
extension for pushbutton.--exten(function code)
next -- function code for the enter key.
PBO
module status_3000.
PAI
module user_command_3000.
<b>module user_command_3000.</b>
if sy-ucomm = exten.
call screen 400. (screen which shows extension values can be kept).
elseif sy-ucomm = Next.
if ra_matnr-low is not initial.
ra_matnr-SIGN = 'I'.
ra_matnr-OPTION = 'EQ'.
APPEND ra_matnr.
clear ra_matnr.
endif.
if ra_matnr-high is not initial.
ra_matnr-SIGN = 'I'.
ra_matnr-OPTION = 'EQ'.
APPEND ra_matnr.
clear ra_matnr.
endif.
endif.
endmodule.
module status_3000.
read table ra_matnr index 1 into ra_matnr .
set pf-status '3000'.
set title '3000'.
endmodule
Br,
Laxmi. -
Hi all
how to declare variant in the screen(not the selection screen) used in module programmingHi Ganesh,
Check this info.
Variants
the link is
http://help.sap.com/search/highlightContent.jsp
Variants allow you to save sets of input values for programs that you often start with the same selections. You can use them for any programs except subroutine pools (type S).
Contents
Variants: Overview
Initial Screen
Displaying a Variant Overview
Creating and Maintaining Variants
Creating Variants
Attributes of Variants
Changing Variants
Deleting Variants
Printing Variants
Variable Values in Variants
Creating Variables for Date Calculations
User-specific Selection Variables
Creating User-specific Variables
Changing Values Interactively
Changing Values from the Program
Fixed Values from Table TVARV
Creating Table Variables from TVARV
Changing TVARV entries
Running a Program with a Variant
Variants: Overview
Use
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, see Working with selection screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant.
You can create any number of variants for any program in which selection screens are defined. Variants are assigned exclusively to the program for which they were created.
You can also use variants to change the appearance of the selection screen by hiding selection criteria. This is particularly useful when you are working with large selection screens on which not all of the fields are relevant.
Reports, module pools, and function groups may have several selection screens. It is therefore possible to create a variant for more than one selection screen.
Variants are an interface between the user and the selection screen. They can be used both in dialog and in background mode, although their uses are slightly different.
Variants in Dialog Mode
In dialog mode, variants make things easier for the user, since they save him or her from continually having to enter identical values. They can also make the selection screen easier to read, because you can use them to hide input fields. Running an executable program with a variant containing an optimal set of values also reduces the capacity for user error. The optimized database selections speed up the runtime of the program.
Variants in Background Mode
Variants are the only method for passing values to a report program in a background job. Therefore, when you run a program in the background, you must use a variant (or SUBMIT... VIA JOB). To avoid you having to create a new variant each time you run the report, ABAP contains a mechanism allowing you to pass variable values to variants. See variable values in variants.
To ensure that an executable program is always started using a variant, you can specify in the program attributes that the program may only be started in this way.
Features
Creation of variants
Display, change, copy, print, and delete variants
Use and definition of variables in variants
Variable date calculation
User-specific fixed values
Fixed values in table TVARV
You access the variant maintenance tool from the initial screen of the ABAP Editor. Enter the name of the program, select Variants in the Sub-objects group box, and then choose Display or Change.
Functions
The above screen allows you to:
Create variants
Display the variant directory
Display and change values and attributes
Copy, delete, and rename variants
Before creating a new variant for a program, you should check whether you can use or adapt an existing variant instead.
There are two ways to display variants:
Position the cursor on the Variant field on the initial screen and press F4. The following dialog box lists all of the available variants:
Choose Variants ® Directory on the initial screen:
Creating Variants
Prerequisites
You must have defined one or more selection screens for the relevant program. The program may have any type except type S.
Procedure
On the initial screen of the ABAP Editor, enter the name of the program for which you want to create a variant, select Variants in the Sub-objects group box, and choose Change.
On the variant maintenance initial screen, enter the name of the variant you want to create.
Note the naming convention for variants (see below).
Choose Create.
If the program has more than one selection screen, a dialog box appears in which you can assign the variant to one or more screens. The dialog box does not appear if the program only has one selection screen. In this case, the selection screen of the program appears straight away.
If there is more than one selection screen, select the screens for which you want to create the variant.
Example:
If you choose Variant for all selection screens, the variant also applies to any selection screens that you create after creating the variant.
Otherwise, the variant only supplies values to the selection screens that you select in the list.
Choose Continue.
The (first) selection screen of the program appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them. If you keep scrolling forwards, the Continue button appears on the last selection screen.
Enter the required selections, including multiple and dynamic selections.
Choose Continue.
Result
When you have finished, an overview screen appears (ABAP: Save Attributes of Variant), on which you can enter the attributes of your variant and save it.
Note that when you create a new variant, you must enter both values and attributes.
Names of variants: Names can consist of up to 14 alphanumeric characters. The "% " character is not allowed. If you want the variant to be transported automatically with its program, you must create a system variant. The name of a system variant starts "CUS&" for customers, and "SAP&" for SAP system variants. You can only use the "&" character within this prefix in the name of a system variant. It may not occur in any other context. System variants are administered by the Workbench Organizer. Although you can create and access variants from any client, they are always stored in client "000".
Check this Link :
http://help.sap.com/saphelp_47x200/helpdata/en/0a/af73ec76ac11d1ad670000e8a6353a/frameset.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards -
How to declare a list of dates
Hi,
I have an item which type is "Display as text based on LOV". I put in the source section under the type "Pl/SQL function body" the following pl/sql function :
DECLARE
X VARCHAR2 (4000);
Y DATE ;
BEGIN
X := 'SELECT distinct(TO_CHAR(DATE1, ''YYYY'')) d, (TO_CHAR(DATE1, ''YYYY'')) r FROM SIVOA.EVV_'|| :p4_site ||' WHERE CLEF_VAR = (SELECT CLEF_VAR FROM SIVOA.SITE_DEBIT_RIVIERE WHERE SITE ='''|| :p4_site ||''')
order by d';
EXECUTE IMMEDIATE X INTO Y;
RETURN Y ;
END;The problem is that I get an ORA error.
ORA-00932: types de données incohérents ; attendu : - ; obtenu : -
I know that I have declared Y as a date and that what is returned by my function is a list of dates. I don't know how to declare a list of dates or whatever to be returned as a lis of values. Hope I am clear, sorry for my english.
Thank you for your kind help.
ChristianHi Tony
You hare very patient with me thank you !!!
Let me clarify well.
I am trying to create a list of values based on dates contained in a table. This list of values should contains the "years". If the table contains data for the years 2005, 2006, 2007, then the list of value should return :
2006
2007
2008
As I want a list of value I need to have a display and a return value. The name of the table is 'dynamic' It is the item P4_SITE that contains a part of the name of the table. This is why I am usins PL/SQL, because I don't know the name of the table in advance.
I have not seen any way to put a pl/sql statement in the List of values definition of the item. Thi s is why I try to make a LOV with the SOURCE of the item.
Hope I am clear. -
How to declare top of page in alv report
hi guru
how to declare top of page in alv report
thanks
subhasisHi,
check this simple program.
REPORT ZBHALV_LIST.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_SORT = SORT[]
IT_EVENTS = EVE[]
TABLES
T_OUTTAB = ITAB .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards,
Priyanka. -
Hi all,
can any body explain how to use ranges? i used like below..
but im not getting pls correct it...
RANGES : HKONT FOR BSEG-HKONT.
DATA : WA_HKONT LIKE LINE OF HKONT.
START-OF-SELECTION.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725140'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725120'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725110'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725190'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725130'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725160'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725180'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725150'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
WA_HKONT-SIGN = 'I'.
WA_HKONT-OPTION = 'EQ'.
WA_HKONT-LOW = '10725170'.
WA_HKONT-HIGH = ' '.
APPEND WA_HKONT TO HKONT.
CLEAR WA_HKONT.
and in select quer i have used like this.
SELECT BUKRS
BELNR
GJAHR
BUZEI
HKONT
LIFNR
DMBTR
KTOSL
WERKS
SEGMENT
FROM BSEG INTO CORRESPONDING FIELDS OF TABLE IT_BSEG
FOR ALL ENTRIES IN IT_BKPF
WHERE BUKRS = IT_BKPF-BUKRS
AND BELNR = IT_BKPF-BELNR
AND GJAHR = IT_BKPF-GJAHR
AND LIFNR IN S_LIFNR
AND WERKS IN S_WERKS
AND HKONT IN HKONT
AND KTOSL = 'FR1'
AND SEGMENT IN S_SEGM.
pls help...Hi Sameer,
Let me share my solution with you.
try with this....
RANGES : HKONT FOR BSEG-HKONT.
INITIALIZATION.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725140'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725120'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725110'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725190'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725130'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725160'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725180'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725150'.
APPEND HKONT.
CLEAR HKONT.
HKONT-SIGN = 'I'.
HKONT-OPTION = 'EQ'.
HKONT-LOW = '10725170'.
APPEND HKONT.
CLEAR HKONT.
Hope this helps you. Reply for queries, shall post the updates.
Regards.
Kumar. -
How to declare variables in standard text - so10 t.code
Hello Friends,
How to declare variables in standard text - so10 t.code? Your response will be appreciated much.
Thanks
SriFor Script & Smartform Text - &VAR&
-
How to declare value binding to array list element in a pojo?
I have a POJO called P, that contains an ArrayList member called w.
class P {
private ArrayList w = new ArrayList(5);
w is initied in the class constructor.
The POJO is in the SessionBean and I would like to reference individual
elements in the ArrayList via a value binding like so;
#{SessionBean1.instanceOfP.w[5]}
I'm not sure how to declare the getter/setter for member W in POJO P
so that setter and getter injection work.You may not be able to directly set the indexed value.
Try some thing like this.
Add a property that returns the indexed value.
Ex. if you ArrayList objets are of type "String"
int index = 5;
public String getMyValue(){
return w.get[index]
Now your value binding would look something like
#{SessionBean1.myValue}
BTW, if you want to access different index, create another method
public void setIndex(int index){
this.index = index;
- Winston
http://blogs.sun.com/roller/page/winston?catname=Creator -
How to declare Dynamic table in Tables Parameters of a Function Module...
Hi Gurus,
I would like to Know how to declare a Dynamic table in Tables parameters of a Function Module.
so that it should be able to hold any table data ....
I have tried all possible ways of trying to assign fields-symbol like declarations which doesnt allow here ...
plz Dont reply with the basics of creating dynamic internal tables, coz my case is not an Internal table it is FM table parameter declaration.....Hi,
If you are requirement is to create a function module with tables parameter having a generic line type i.e. no specific line type
just declare it with a name under Parameter name with out specifying the type.
A reference function module with such parameter, i would quote is the standard GUI_UPLOAD/ GUI_DOWNLOAD where the parameters specified under TABLES are generic.
If you want to process the values passed to these parameters in the source code of function module, field symbols would be a preferable option.
Regards,
Sharath Panuganti -
HR abap : how to declare internal table to fetch data from 0585 infotype
Hi all ,
I am able to fetch the data from pa0585 infotype for set of employee no , but the problem is as the fields in pa0585 (like Contr to ULIP , NSC , Medical Treatment,Contribution to Certain Pension Funds so on ..) will be changed dynamically and will be displayed based on the amount value in descending order iam not able to store the values of the fileds into internal table . I dont understand how to declare the internal table ..Please help in if u have solved this kind of problem.
I shld get the output in this way ...
Emp No Name Medical treatment Contr to ULIP ....... so on
101 abc 10000 150000 .......so on
102 xyz 12000 150000 .......so on
My header shld be fixed and I shld display values in this way .... I can use write statement to display directly .
Thanks ....Hi
Decalre INFOTYPE
Goto SE37 - Find FM -
READINFOTYPE* -
How to declare internal table in BADI with variable name beginning with 0..
Gurus,
How to declare an internal table within a BADI. I have to implement a BADI UC_TASK_CUSTOM for BCS to BW load and there i have to declare an internal table like:
TYPES: BEGIN OF t_cube_data,
0cs_version TYPE /bi0/oics_version,
0sem_cgcomp TYPE /bi0/oisem_cgcomp,
bcs_vers TYPE /bic/oibcs_vers,
bcs_lcus TYPE /bic/oibcs_lcus,
bcs_ldch TYPE /bic/oibcs_ldch,
bcs_invcom TYPE /bi0/oibcs_invcom,
bcs_litem TYPE /bic/oibcs_litem,
bcs_llob TYPE /bic/oibcs_llob,
bcs_lmay TYPE /bic/oibcs_lmay,
0move_type TYPE /bi0/oimove_type,
pcompany TYPE /bi0/oipcompany,
bcs_lprg TYPE /bic/oibcs_lprg,
figlxref3 TYPE /bic/oifiglxref3,
fiscyear TYPE /bi0/oifiscyear,
fiscper3 TYPE /bi0/oifiscper3,
fiscvarnt TYPE /bi0/oifiscvarnt,
curkey_gc TYPE /bi0/oicurkey_gc,
unit TYPE /bi0/oiunit,
cs_trn_gc TYPE /bi0/oics_trn_gc,
cs_trn_qty TYPE /bi0/oics_trn_qty,
END OF t_cube_data
But with this declaration it gives a error saying that u cannot have a variable beginning with 0...like 0cs_version....
but i have to do it for my functionality to wrk...
Please help me do it....
how can i declare a internal table that allows me to have variable names that start with 0....
Please help....Its URGENT....
Thanks
SamMurali,
I need to have 0 before the variable name in the declaration of the internal table....how can i attain that....
Please suggest...
Thanks
Sam -
How to declare in anonymous block
Declare
CURSOR c_je2acct_othr
IS
SELECT j.jemq_num, j.ml_retail_account,
-- (CASE WHEN j.exer_type = 4 THEN j.sar_shares ELSE j.shares END) shares, -- removed * -1 from sar_shares Manu 12/02/04
/* Commented 02/01/07*/
(CASE WHEN j.exer_type = 4 THEN
fn_get_shares(u.user_id,u.exer_num,u.soc_sec,j.
sar_shares)
ELSE (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold and j.shares=u.shrs_sold then 0 else j.shares end)
END) shares,
-- removed * -1 from sar_shares Manu 12/02/04
j.name_first,
j.name_last, j.exer_type, j.ml_sec_num, j.ivr_plan_num,
j.exer_dt, j.grant_dt, j.user_id, j.mlu_rowid, j.settle_dt,
j.exer_num, j.plan_type, j.grant_num, j.acct_num_othr,
j.add_cancel,
/* (CASE WHEN j.exer_type = 4 THEN j.sar_cash_amount * -1 -- turned negative Manu 12/02/04 ml_retail distr
commented the above line for calculation of proceeds into other account for sar sale.
(CASE WHEN j.exer_type = 4 THEN
Pk_Xop_Citibank_Forex.fn_get_netamount(u.user_id,u.
exer_num,u.soc_sec,
u.sar_cash_amount,NVL(u.comm_value, 0),
NVL(u.tot_fee, 0),
NVL(u.multi_curr_handling_fee, 0))
-- Removed the negative as on ml_exer_upload all values are +ve.
ELSE
( (DECODE(u.exer_type,0,u.opts_exer * u.mkt_prc,u.shrs_sold * u.mkt_prc
- ( ROUND((u.opts_exer * NVL (u.opt_prc, 0)),2)
-- SPIF 39060 Added a Round of condition.
+ DECODE (NVL (u.shrs_wthld_for_taxes, 'N'),
'Y', 0,
ROUND (u.tot_tax, 2)
+ u.tot_fee
+ NVL(u.multi_curr_handling_fee,0)
+ u.comm_value
- u.backup_withholding
END ) AS gl_amt,
T.je_othr_mlacct_jemsg AS vc_trailer_desc,
u.opts_exer ,
u.shrs_sold,
u.rsu_type
FROM TB_XOP_JEMQ j, TB_ML_EXER_UPLOAD u, TB_FC_COMPY T
WHERE j.q_flag = 'N' AND u.je_flag = 'Y'
AND j.entry_dttime >= TRUNC (SYSDATE)
AND j.entry_dttime < TRUNC (SYSDATE) +1
AND j.source = 'X'
AND j.acct_num_othr != ' '
and (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold then (case when j.shares=u.shrs_sold then 0 else 1 end) else 1 end)=1 FIx for PCTUP00566081
AND ( disp_flag <> 'D' OR disp_flag IS NULL ) Added by MARAN ARUNACHALAM on 01/25/2011 for PCTUP00493542 Fix
and j.current_status = '2Q' removed not required now in new plan
AND NOT EXISTS (
SELECT 1
FROM TB_XOP_JEMQ j2
WHERE j2.prev_jemq = j.jemq_num
AND source = 'T'
AND j.add_cancel = j2.add_cancel
AND j.user_id = j2.user_id
AND j.exer_num = j2.exer_num)
AND j.mlu_rowid = u.ROWID
AND 'CMS'||T.compy_acronym||'_USER' = j.user_id
ORDER BY add_cancel DESC;
v_mlac_mesg VARCHAR2(1000);
-- JE_OTHR_MLACCT_JEMSG
BEGIN
dbms_output.put_line('success');
FOR v_je2acct_othr IN c_je2acct_othr
LOOP
dbms_output.put_line('success1');
BEGIN
dbms_output.put_line('success2');
IF v_je2acct_othr.add_cancel = 'C'
THEN
dbms_output.put_line('success3');
UPDATE TB_XOP_JEMQ
SET add_cancel = DECODE(current_status,
'RJ',
add_cancel,
'C'),
q_flag = DECODE(current_status, 'RJ', q_flag, 'N'),
activ_dt = DECODE(current_status,
'RJ',
activ_dt,
SYSDATE)
WHERE prev_jemq = v_je2acct_othr.jemq_num
AND user_id = v_je2acct_othr.user_id
AND exer_num = v_je2acct_othr.exer_num
AND source ='T';
dbms_output.put_line('success4');
ELSIF v_je2acct_othr.add_cancel = 'A'
THEN
dbms_output.put_line('success5');
-- manipulating amount and shares to transfer when different exercise types
v_je2acct_othr.gl_amt :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN 0
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer
!= v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.gl_amt
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer =
v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.gl_amt
ELSE v_je2acct_othr.gl_amt
END );
---- Commented on 11/01/2006 For Fixing 30585
/* v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.opts_exer
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.opts_exer - v_je2acct_othr.shrs_sold
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );*/
---- Commented on 11/01/2006 For Fixing 30585
v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.
Shares
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer
!= v_je2acct_othr.shrs_sold and v_je2acct_othr.shares!=0 and v_je2acct_othr.plan_type <> 0 -- Added plantype condition for CQ:PCTUP00493542
THEN v_je2acct_othr.Shares - v_je2acct_othr.shrs_sold
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer =
v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );
dbms_output.put_line('success6');
IF LENGTH(TRIM(v_je2acct_othr.acct_num_othr))=8 OR TRIM(v_je2acct_othr.acct_num_othr) IS NULL
THEN
v_mlac_mesg :=NULL;
ELSE
v_mlac_mesg :='Check the ml a/c length';
dbms_output.put_line('success7');
END IF;
INSERT INTO TB_XOP_JEMQ
(jemq_num,
prev_jemq,
ml_retail_account,
wcma_shares,
shares, wcma_taxes, tax_amt,
wcma_reimburse,
reimburse_amt,
name_first,
name_last, exer_type,
ml_sec_num, wcma_bulking, bulking_amt,
ivr_plan_num,
exer_dt, grant_dt,
user_id, source,
mlu_rowid, settle_dt,
exer_num, plan_type,
grant_num,
vc_trailer_desc, rsu_type
VALUES (Pk_Xop_Get_Jemqnum.fn_xop_get_jemqnum,
v_je2acct_othr.jemq_num,
v_je2acct_othr.acct_num_othr,
-- 2nd ml_retail_account,
v_je2acct_othr.ml_retail_account,
-- move shares from old acct to 2nd acct above
v_je2acct_othr.shares,
--this is SHARES
--wcma_taxes
0,
--tax_amt,
v_je2acct_othr.ml_retail_account,
-- move gl_amt from old acct to 2nd acct above
v_je2acct_othr.gl_amt * -1,
v_je2acct_othr.name_first,
v_je2acct_othr.name_last, v_je2acct_othr.
exer_type,
v_je2acct_othr.ml_sec_num, ' ',
--wcma_bulking,
0,
--bulking_amt,
v_je2acct_othr.ivr_plan_num,
v_je2acct_othr.exer_dt, v_je2acct_othr.
grant_dt,
v_je2acct_othr.user_id, 'T',
--source
v_je2acct_othr.mlu_rowid, v_je2acct_othr.
settle_dt,
v_je2acct_othr.exer_num, v_je2acct_othr.
plan_type,
v_je2acct_othr.grant_num,
v_je2acct_othr.vc_trailer_desc,
v_je2acct_othr.
rsu_type
dbms_output.put_line('success8');
END IF;
EXCEPTION
WHEN OTHERS
THEN
Pr_Xop_Log_Errors ( 'Code :'
|| NVL(v_mlac_mesg,SQLERRM)
|| ' at '
|| USER
|| 'at sub exec block in pop_je2acct_othr'
END;
dbms_output.put_line('success9'); -- end of begin within loop
END LOOP;
--COMMIT;
EXCEPTION
WHEN OTHERS
THEN
Pr_Xop_Log_Errors ( 'Code :'
|| NVL(v_mlac_mesg,SQLERRM)
|| ' at '
|| USER
|| 'at pk_xop_jemq.pop_je2acct_othr'
dbms_output.put_line('success10');
END;}
{ORA-06550: line 10, column 31:
PL/SQL: ORA-00904: "FN_GET_SHARES": invalid identifier
ORA-06550: line 6, column 11:
PL/SQL: SQL Statement ignored
ORA-06550: line 81, column 17:
PLS-00364: loop index variable 'V_JE2ACCT_OTHR' use is invalid
ORA-06550: line 81, column 14:
PL/SQL: Statement ignored}
HI friends, as i am getting two errors when running code in the anonymous block, then how to declare that 2 errors in declare section plz guide me}Noone, will read your code unless it is formatted like below. See the comments added
DECLARE
CURSOR c_je2acct_othr
IS
SELECT j.jemq_num,
j.ml_retail_account,
-- (CASE WHEN j.exer_type = 4 THEN j.sar_shares ELSE j.shares END) shares, -- removed * -1 from sar_shares Manu 12/02/04
/* Commented 02/01/07*/
CASE
WHEN j.exer_type = 4
--"The current user is not seeing the below function fn_get_shares.Privilege issue probably.
THEN fn_get_shares(u.user_id,u.exer_num,u.soc_sec,j. sar_shares)
ELSE (
CASE
WHEN u.exer_type=2
AND u.opts_exer!=u.shrs_sold
AND j.shares =u.shrs_sold
THEN 0
ELSE j.shares
END)
END) shares,
-- removed * -1 from sar_shares Manu 12/02/04
j.name_first,
j.name_last,
j.exer_type,
j.ml_sec_num,
j.ivr_plan_num,
j.exer_dt,
j.grant_dt,
j.user_id,
j.mlu_rowid,
j.settle_dt,
j.exer_num,
j.plan_type,
j.grant_num,
j.acct_num_othr,
j.add_cancel,
/* (CASE WHEN j.exer_type = 4 THEN j.sar_cash_amount * -1 -- turned negative Manu 12/02/04 ml_retail distr
commented the above line for calculation of proceeds into other account for sar sale.
CASE
WHEN j.exer_type = 4
THEN Pk_Xop_Citibank_Forex.fn_get_netamount(u.user_id,u. exer_num,u.soc_sec, u.sar_cash_amount,NVL(u.comm_value, 0), NVL(u.tot_fee, 0), NVL(u.multi_curr_handling_fee, 0))
-- Removed the negative as on ml_exer_upload all values are +ve.
ELSE ( (DECODE(u.exer_type,0,u.opts_exer * u.mkt_prc,u.shrs_sold * u.mkt_prc )) - ( ROUND((u.opts_exer * NVL (u.opt_prc, 0)),2)
-- SPIF 39060 Added a Round of condition.
+ DECODE (NVL (u.shrs_wthld_for_taxes, 'N'), 'Y', 0, ROUND (u.tot_tax, 2) ) + u.tot_fee + NVL(u.multi_curr_handling_fee,0) + u.comm_value ) - u.backup_withholding )
END ) AS gl_amt,
T.je_othr_mlacct_jemsg AS vc_trailer_desc,
u.opts_exer ,
u.shrs_sold,
u.rsu_type
FROM TB_XOP_JEMQ j,
TB_ML_EXER_UPLOAD u,
TB_FC_COMPY T
WHERE j.q_flag = 'N'
AND u.je_flag = 'Y'
AND j.entry_dttime >= TRUNC (SYSDATE)
AND j.entry_dttime < TRUNC (SYSDATE) +1
AND j.source = 'X'
AND j.acct_num_othr != ' '
--and (case when u.exer_type=2 and u.opts_exer!=u.shrs_sold then (case when j.shares=u.shrs_sold then 0 else 1 end) else 1 end)=1 -- FIx for PCTUP00566081
--AND ( disp_flag <> 'D' OR disp_flag IS NULL ) -- Added by MARAN ARUNACHALAM on 01/25/2011 for PCTUP00493542 Fix
--and j.current_status = '2Q' -- removed not required now in new plan
AND NOT EXISTS
(SELECT 1
FROM TB_XOP_JEMQ j2
WHERE j2.prev_jemq = j.jemq_num
AND source = 'T'
AND j.add_cancel = j2.add_cancel
AND j.user_id = j2.user_id
AND j.exer_num = j2.exer_num
AND j.mlu_rowid = u.ROWID
AND 'CMS'
||T.compy_acronym
||'_USER' = j.user_id
ORDER BY add_cancel DESC;
v_mlac_mesg VARCHAR2(1000);
-- JE_OTHR_MLACCT_JEMSG
BEGIN
dbms_output.put_line('success');
FOR v_je2acct_othr IN c_je2acct_othr
LOOP
dbms_output.put_line('success1');
BEGIN
dbms_output.put_line('success2');
IF v_je2acct_othr.add_cancel = 'C' THEN
dbms_output.put_line('success3');
UPDATE TB_XOP_JEMQ
SET add_cancel = DECODE(current_status, 'RJ', add_cancel, 'C'),
q_flag = DECODE(current_status, 'RJ', q_flag, 'N'),
activ_dt = DECODE(current_status, 'RJ', activ_dt, SYSDATE)
WHERE prev_jemq = v_je2acct_othr.jemq_num
AND user_id = v_je2acct_othr.user_id
AND exer_num = v_je2acct_othr.exer_num
AND source ='T';
dbms_output.put_line('success4');
ELSIF v_je2acct_othr.add_cancel = 'A' THEN
dbms_output.put_line('success5');
-- manipulating amount and shares to transfer when different exercise types
--"You cannot assign values to the recor variable declared for a loop. Either define seperate variables or use explicit record variable"
v_je2acct_othr.gl_amt :=
CASE
WHEN v_je2acct_othr.exer_type = 0 THEN
0
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold THEN
v_je2acct_othr.gl_amt
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold THEN
v_je2acct_othr.gl_amt
ELSE
v_je2acct_othr.gl_amt
END );
---- Commented on 11/01/2006 For Fixing 30585
/* v_je2acct_othr.shares :=( CASE
WHEN v_je2acct_othr.exer_type = 0 THEN v_je2acct_othr.opts_exer
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold
THEN v_je2acct_othr.opts_exer - v_je2acct_othr.shrs_sold
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold
THEN 0
ELSE v_je2acct_othr.shares
END );*/
---- Commented on 11/01/2006 For Fixing 30585
v_je2acct_othr.shares :=
CASE
WHEN v_je2acct_othr.exer_type = 0 THEN
v_je2acct_othr. Shares
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer != v_je2acct_othr.shrs_sold AND v_je2acct_othr.shares!=0 AND v_je2acct_othr.plan_type 0 -- Added plantype condition for CQ:PCTUP00493542
THEN
v_je2acct_othr.Shares - v_je2acct_othr.shrs_sold
--- Replaced opts_exer with the Shares amount from the previous journal for fixing 30585
WHEN v_je2acct_othr.exer_type = 2 AND v_je2acct_othr.opts_exer = v_je2acct_othr.shrs_sold THEN
0
ELSE
v_je2acct_othr.shares
END );
dbms_output.put_line('success6');
IF LENGTH(TRIM(v_je2acct_othr.acct_num_othr))=8 OR TRIM(v_je2acct_othr.acct_num_othr) IS NULL THEN
v_mlac_mesg :=NULL;
ELSE
v_mlac_mesg :='Check the ml a/c length';
dbms_output.put_line('success7');
END IF;
INSERT
INTO TB_XOP_JEMQ
jemq_num,
prev_jemq,
ml_retail_account,
wcma_shares,
shares,
wcma_taxes,
tax_amt,
wcma_reimburse,
reimburse_amt,
name_first,
name_last,
exer_type,
ml_sec_num,
wcma_bulking,
bulking_amt,
ivr_plan_num,
exer_dt,
grant_dt,
user_id,
source,
mlu_rowid,
settle_dt,
exer_num,
plan_type,
grant_num,
vc_trailer_desc,
rsu_type
VALUES
Pk_Xop_Get_Jemqnum.fn_xop_get_jemqnum,
v_je2acct_othr.jemq_num,
v_je2acct_othr.acct_num_othr,
-- 2nd ml_retail_account,
v_je2acct_othr.ml_retail_account,
-- move shares from old acct to 2nd acct above
v_je2acct_othr.shares,
--this is SHARES
--wcma_taxes
0,
--tax_amt,
v_je2acct_othr.ml_retail_account,
-- move gl_amt from old acct to 2nd acct above
v_je2acct_othr.gl_amt * -1,
v_je2acct_othr.name_first,
v_je2acct_othr.name_last,
v_je2acct_othr. exer_type,
v_je2acct_othr.ml_sec_num,
--wcma_bulking,
0,
--bulking_amt,
v_je2acct_othr.ivr_plan_num,
v_je2acct_othr.exer_dt,
v_je2acct_othr. grant_dt,
v_je2acct_othr.user_id,
'T',
--source
v_je2acct_othr.mlu_rowid,
v_je2acct_othr. settle_dt,
v_je2acct_othr.exer_num,
v_je2acct_othr. plan_type,
v_je2acct_othr.grant_num,
v_je2acct_othr.vc_trailer_desc,
v_je2acct_othr. rsu_type
dbms_output.put_line('success8');
END IF;
EXCEPTION
WHEN OTHERS THEN
Pr_Xop_Log_Errors ( 'Code :' || NVL(v_mlac_mesg,SQLERRM) || ' at ' || USER || 'at sub exec block in pop_je2acct_othr' );
END;
dbms_output.put_line('success9'); -- end of begin within loop
END LOOP;
--COMMIT;
EXCEPTION
WHEN OTHERS THEN
Pr_Xop_Log_Errors ( 'Code :' || NVL(v_mlac_mesg,SQLERRM) || ' at ' || USER || 'at pk_xop_jemq.pop_je2acct_othr' );
dbms_output.put_line('success10');
END;
{code} -
How to declare a dynamic array in java
I have to use a dynmic array of boolean and the size of this array will defiend throuh the run of the program to explian
boolean[][] a;
a=new boolean[number_of_ raw][number_of_ culm];
after the program run the number_of_ raw and number_of_ culm will defind..so if any body know how to declare this kind of arraies in java please help me.My previous post gives me an idea on how to use ArrayList of ArrayList as dynamic 2 dimensional array.
More info bellow
ArrayList rows = new ArrayList()
ArrayList columns_of_row0 = new ArrayList()
rows.insertAt(0) = columns_of_row0;
ArrayList columns_of_row1 = new ArrayList()
rows.insertAt(1) = columns_of_row1;and so on..
You can't use the code exactly or similar way, it would depend on how this array grows in your application.
But this and my previous post should give an idea on how to insert and retrieve elements from ArrayList when
treated as 2 dimensional array.
Hope this helps. -
How to Declare Arrays in bpel and use them as acollection
Hi,
I Am new to Bpel, I had created an empty Bpel Process and configured file adapter to a directory, In my text file i have 3 records with four columns, each column seperated by ',' and each record seperated by "EOL(end of line)", Below is the xsd file generated by the native format xsd builder, taken a recieve activity to recieve the contents of file from file adapter.
So all the data which is in the file will be there in recieve activity.
FileContents
55555,rgfdgsd,gfdgfdg,23
66666,retretret,trtertg,21
77777,rtrttreter,trtter,23
My Question is
I want to compare whether value of C1 = '55555' and if the value is equal to 55555 then that record with c1=55555 has to be inserted into database by using Arrays
How to compare the value of c1 through bpel functions.
with java i have to use the logic similar to this by using Xpath
getElement by tagname(c1);- it will give all the elements with tagname c1, three records are there with tagname c1 (c1=55555,c1=66666,c1=77777), we have to iterate through the elemnts and check whether the value iof c1='55555' and get the whole parent block which contains values of c1,c2,c3,c4 and insert that to database
What variables we have to use to get the Similar logic in bpel
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://TargetNamespace.com/FileAdapter"
xmlns:tns="http://TargetNamespace.com/FileAdapter"
elementFormDefault="qualified"
attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD">
<xsd:element name="Associates">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Associate" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:double" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""">
</xsd:element>
<xsd:element name="C4" type="xsd:double" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
I want to do it by using Arrays,
Please post the step by step procedure like
How to declare an Array?
How to iterate the results in recieve acticity of file adapter and put them to array?
How to compare the values in array with our desired value?
Please Look into this and suggest me the solution.
RegardsI think it is a good option to use transformations. Do you have any critical reason why you want to do this using array?
Little explanation below for your questions.
As per my understanding from variable is the recieve activity variable and to variable is the Array variable is it right?
Yes. Here I was try to build my array from the different source system data. This will append data to the array variable.
How can we declare an array variable in bpel(to variable) with name as Variable_Array, part as payload and query as ArrayList?
*Any element that can hold another element can be a array.
For example if element A is declared as sequence of element B type, then A acts as a array for B*
Could you please explain this also, what is from variable? and what is to variable?
+<assign name="Assign_XPath_For_Array">+
+<copy><from expression="concat('/ns1:ArrayList/ns2:ArrayElem') "/><to variable="Variable_Xpath"/></copy>+
+</assign>+
what is the type of to variable "Variable_Xpath"(String or int etc)?
This creates a dynamic Xpath and store in some variable here. Here the variable is called Variable_Xpath which is a string
similarly what is the type of to variable?
+<assign name="Assign_Read_Array">+
+<copy>+
+<from expression="bpws:getVariableData('Variable_Array','payload',bpws:getVariableData('Variable_Xpath'))"/>+
+<to variable="Variable_Read_Array_Element" query="/ns1: ABC"/>+
+</copy>+
+</assign>+
To variable type is the variable that I read from the Array.
*For example if A is the array holding B, then the to variable is B and from is doing A[counter]*
Every Little Helps
Kalidass Mookkaiah
http://oraclebpelindepth.blogspot.com/ -
How to declare ftp in File class. I want to display filename of file in FTP
How to declare ftp in File class. I want to display filename of file in FTP server.
I try
File f2= new File("ftp://abc:abc1111@ABC/file");
String n[] = f2.list();
System.out.print(n[0]);
Vector filename = null ;
for (int i2 = 0; i2 < n.length; i2++) {
filename.add(n[i2]);
but it is not work
Thank you.You can use Jakarta's net-package to connect to a FTP server.
Download it here:
http://jakarta.apache.org/site/downloads/downloads_commons-net.cgi
Here's a small demo:
import org.apache.commons.net.ftp.*;
public class FTPTest {
private boolean isConnected;
private FTPClient client;
public FTPTest() {
isConnected = false;
connect();
private void connect() {
String server = "server.org";
String username = "user";
String password = "password";
client = new FTPClient();
try {
client.connect(server);
client.login(username, password);
String[] files = client.listNames();
for(int i = 0; i < files.length; i++) {
System.out.println(files);
isConnected = true;
disconnect();
catch(Exception e) {
e.printStackTrace();
private void disconnect() {
if(isConnected) {
try {
client.disconnect();
isConnected = false;
catch(Exception e) {
e.printStackTrace();
public static void main(String[] args) {
new FTPTest();
Maybe you are looking for
-
How can i save a form in adobe reader than only allows you to type info but doesnt allow you to save
I have a file that i need to email to someone, however when i fill in the information at the bottom of the page i have an option to submit via email or print... when i submit via email, it states its being sent but the person on the other end doesnt
-
BAPI for reset cleared items ie for transaction FBRA
Hi all, Is ther any BAPI for trasaction FBRA ? Ther are 2 BAPIS REVERSE_CLEARING or FM_REVERSE_CLEARING but are not released . Kindly do the needful.
-
Projector can't open a projector
Hi all, I have a projector that I'm using as a menu, when I click buttons on the projector I want to open other projectors and close this menu projector. What is the best way to accomplish this? I tried the following statements before but they only w
-
I want to be able to use this website, [link removed by moderator] for my team members so they can have their own urls, email addresses, particular text, and images. Front page did this years ago. Does dream weaver have this built in?
-
This is two times now. During auto search download upgrades to org. pgm's i.e. P.S. 2 and now my ORG. Acrobat, your downloads have curcumvented my ability to use MY ORG. Progams in favor of your NEW COSTLY progams. i.e. Some of us OLD SENIOR'S get by