How to decrease screen brightness below the minimum ?

I have windows 7 as bootcamp. I can decrease the screen brightness to the minimum but that itself is too bright to my eyes. But the minimum setting when i use mac is less brighter...
So is there a way i can decrease the brightness below the minimum in bootcamp ?
Thanks

Hi Gopa,
I have the same problem with all my Macs under Windows 7.
I guess the Windows drivers are unsuitable!!
Did you find a solution in the meantime?
Thanks,

Similar Messages

  • How to reduce screen brightness below standard level

    Hi !
    How to reduce screen brightness below standard level in ThinkPad T520 ?
    I think it is possible somehow, but I don't know how. I reduced brightness to zero using Fn key + End key, but it's not enough, I want to make screen darker, because my eyes get tired.
    Solved!
    Go to Solution.

    The latest Intel graphics driver (from Lenovo) is here:
    http://support.lenovo.com/us/en/downloads/migr-770​38
    This should provide a decent lower bound to brightness. If the install complains about unsupported hardware, force the install using Device Manager and Have Disk. (Something like this: http://forums.laptopvideo2go.com/topic/11997-have-​disk-method-for-windows-7-vista/ )
    If that didn't work, try f.lux (https://justgetflux.com/). It has a software dimming feature (of course, this loses contrast).
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • How to decrease screen brightness further?

    I'd like to decrease the minimum brightness of the related slider. Is it possible to do so?
    EDIT: I mean the backlight so full black pixels become darker too.

    there isn't a way to do so 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I am unable to change my screen brightness using the fn+f2/fn+f3 keys. i understand that it can stil

    I am unable to change my screen brightness using the fn+F2/fn+F3 keys. I understand that it can still be adjusted differently but I want this way to work. Also whenever I change my volume using the fn+F7/fn+F8/fn+F9 keys, the little on-screen display doesn't pop-up any more. I would like to fix this and any help would be greatly appreciated.

    Hi
    You have a couple of options as I see it please find the web link given below and the steps might help you to fix your issue on the unit.
    Resolving Problems with the Brightness of the Display
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • How to paste screen shot in the forum editor

    please help
    how to paste screen shot in the forum editor

    Do you see the "Attach Files" button in between the "Preview" and "Post Message" buttons when posting a question or reply? 
    This is how you would attach an image, you can't embed it into the text here.  Also,  I thought that the "Attach Files" functionality had been removed for performance reasons, but you can try it if you see the button.
    Regards,
    Rich Heilman

  • How to configure screen-brightness of macbook to lowest value as default

    Hi,
    setup: macbook 3,1 with external 24" display. Basicly the user is only using the external screen which is defined as main screen in this 10.5 installation.
    question is:
    Is it possible to define the screen brightness of the macbook itself to lowest possible value ?
    As the macbook screen is not used at all it would be great to disable the brightness or at least reduce it as much as possible. I can do that with the brightness-key, but that is only a session setting. not permanent.
    any ideas ?
    best regards
    fidel

    solved it with an applescript.

  • My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

    My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

    Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

  • How to adjust screen brightness in windows 10

    since i have upgraded to windows 10, i m not able to adjust my laptops screen brightness cause i m not getting the option to adjust screen brightness, nor the screen brightness up and down buttons are working. Also i have updated the graphic adapter and still the condotion is same...no change!!  plz someone give me the solution to get rid of this problem

  • How do I make screen brighter and the sound quality better with W8 OS on my iMac through bootcamp assistant like it is with my mac os ?

    How do I fix my screen brightness on my imac  via W8 OS on my Imac through boot camp assistant and How do I fix the quality of the sound coming from my imac when in w8?

    Alright, first off, thank you for your help so far. I really appreciate it. However, now I have a new problem that I need help with.
    I did exactly what you've said to do, and it worked fine, the screen itself became brighter again, it was just too dim before and the brightness settings were all the way up, but after doing what you said to do, It's as it is when using my Apple/Mac OS. The sound coming from the computer speakers and all the other audio issues have been fixed as well. It all sounds like it should in terms of quality. It's just now that I did that, I'll shutdown my computer, or even restart it for some reason, and each and every single time I do that, It's all back to the way it was before installing anything, dim and poor audio quality. Until I install the drivers again like before.
    Am I going to have to get used to that or something? Or is there an option I'm just not seeing that would make these preferences and instalations permanent until I input/imply otherwise??
    Thanks in advance!!

  • How about screen brightness and the update???

    I have noticed my screen brightness to be lower after the update...I usally have it set to 50% and after then update was complete the brightness was alot lower on the same setting?? ANother person on mac forums had same issue

    Try a different keyboard with your computer if possible. If it woks well, it's a hardware problem.
    http://support.apple.com/kb/TS1381?viewlocale=en_US

  • How can I determine what is the minimum SCN number I need to restore up to.

    Say if I have a full database backup, I know I have file inconsistency, but I want to know what is the minimum time or SCN number a need to roll forward to in order to be able to open the database?
    For example: I do a database restore.
    restore database ;
    RMAN> sql 'alter database open read only';
    sql statement: alter database open read only
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of sql command on default channel at 03/16/2009 15:00:04
    RMAN-11003: failure during parse/execution of SQL statement: alter database open read only
    ORA-16004: backup database requires recovery
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I need need to apply archive log files. All references I find for ORA-00194 state the solution is to "apply more logs until the file is consistent " But "HOW MANY LOGS", or more apporaite up to what time or SCN? How does one determine what TIME or SCN is required to get all file consistent?
    I thought this query might provide the answer, but it doesn't
    select max(checkpoint_change#)
    from v$datafile_header
    MAX(CHECKPOINT_CHANGE#)
    7985876903
    --It applies a bit more redo, but not enough to make my datafiles consistent.
    recover database until SCN=7985876903 ;
    Starting recover at 03/16/09 15:04:54
    using channel ORA_DISK_1
    using channel ORA_DISK_2
    using channel ORA_DISK_3
    using channel ORA_DISK_4
    using channel ORA_DISK_5
    using channel ORA_DISK_6
    using channel ORA_DISK_7
    using channel ORA_DISK_8
    starting media recovery
    channel ORA_DISK_1: starting archive log restore to default destination
    channel ORA_DISK_1: restoring archive log
    archive log thread=1 sequence=18436
    channel ORA_DISK_1: reading from backup piece /temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1
    channel ORA_DISK_1: restored backup piece 1
    piece handle=/temp-oracle/backup/hot/p1/20090315/hourly.arch_P1_47353_681538638_1 tag=TAG20090315T041716
    channel ORA_DISK_1: restore complete, elapsed time: 00:02:26
    archive log filename=/u01/app/oracle/flash_recovery_area/P1/archivelog/2009_03_16/o1_mf_1_18436_4vxd81yc_.arc thread=1 se quence=18436
    Oracle Error:
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u01/oradata/p1/system01.dbf'
    I've discover I need to apply archive logs until this query reports all datafiles as FUZZY=NO , but this only works by guessing at some time periord to roll forward to, then checking the FUZZY column, and try again. Is there a way to know, I have to roll forward to a specific SNC in order for all my datafiles to be consistent?
    select file#
         , status
         , checkpoint_change#
         , checkpoint_time
         , FUZZY
         , RECOVER
    ,LAST_DEALLOC_SCN
    from v$datafile_header
    order by checkpoint_time
    Thanks,
    Jason

    The minimum point in time is the time when the last backup piece for datafiles in that backup was completed.
    Your alert.log should show the redo log sequence number at that time.
    You can query V$ARCHIVED_LOG and get the FIRST_CHANGE# of the first archivedlog generated after that backup piece completed.
    A
    LIST BACKUP;in RMAN should also show you the SCNs at the time of the backups.
    You can also query SCN_TO_TIMESTAMP -- eg
    select timestamp_to_scn(to_timestamp('15-MAR-09 09:24:01','DD-MON-RR HH24:MI:SS')) from dual;will return an approximation of the SCN.
    Hemant K Chitale
    http://hemantoracledba.blogspot.com
    Edited by: Hemant K Chitale on Mar 17, 2009 9:41 AM
    added the LIST BACKUP command from RMAN.

  • How to adjust screen brightness in Nokia 6300

    Gents,
    I have a new Nokia 6300. I don't see any option to lower down the screen brightness in "Settings". How do I adjust the screen brightness?
    Thanks,
    Ferry

    Sorry,Not Doable.

  • Does setting the screen brightness to the MAX shorten the life of the LCD?

    On daytime I set it to about 80%. That's bright enough.
    Also, another thing I noticed was I tried to cover the speakers with my hands. The keyboard lit up a little bit but the screen dimmed down. Is it normal?

    While setting the brightness to maximum doesn't shorten the LCD's actual lifespan it does however, I believe, speed up the degradation on how bright your screen will be.
    As for when you cover the speakers… yes, this is normal. What's happening is that the ambient light sensors (which are under the grilles, are picking up a reduction is ambient light and in doing so is setting the screen brightness down and activating the backlit keyboard.

  • How do I know what is the minimum resource requirement for OLAP 11g?

    How do I know for OLAP 11gR1 ...
    1. what is the minimum number of CPUs and speed required
    2. how much minimum physical memory, SGA, PGA etc. is required?
    Regards, Anirban

    Hello Anirban,
    In summary, since the OLAP option is an option to Oracle Database 11g, Enterprise Edition the minimum requirements in order to run the database would be identical to those necessary to run a "Data Warehousing" type installation. That being said starting up a database is a far cry from actually performing well while accessing and building OLAP Cubes in your Database.
    There are lots of things to consider. For example: the complexity of your model; data sparcity; level of aggregation; system load, SLAs, etc..
    Lets look at true minimum requirements and then consider what it would take to achieve good performance in your environment
    TRUE MINIMUM...
    I performed a test in my environment (Oracle Database 11g Release 2 (11.2.0.2.0) on Oracle Enterprise Linux 5.5) using Analytic Workspace Manager 11.2.0.2.0A and found the following minimum settings to work against the OLAPTRAIN schema (You may find it here http://www.oracle.com/technetwork/database/options/olap/index.html). This is a very small schema which we use for demonstration purposes.
    I discovered that the database started with a memory_target of only 160m (apparently this is the absolute minimum for my environment). I knew that if the database successfully started that I would be able to query the Cube but maintain it? Running queries against the OLAPTRAIN Sales Cube, despite being slow, worked as anticipated. Next, I performed a maintain operation on the Sales Cube where I had to abort the job because it ran into memory issues at 160m, however, when I increased it to only 180m it did a complete maintain in a reasonable timeframe, albeit slow considering the limited resources.
    MINIMUM REQUIREMENTS TO ENSURE REASONABLE PERFORMANCE IN YOUR ENVIRONMENT
    Most importantly ensure you have a good cube design
    Run a sample set of your data in order to define what "reasonable performance" is for your environment. Create a small representative cube in order to test both build and query performance while collecting and analyzing database statistics through AWR and ADDM. For OLAP option specific queries please take a look at http://wiki.oracle.com/page/OLAP+option+-DBASample+Scripts.
    You could creat a view on top of your fact table and use the view to generate your OLAP Cube. This will allow you to test a more manageable amount of data. For example, if you have 10 years of data and want to determine the footprint and resources required in order to manage a Cube of this volume then consider scoping it down to a few months first then increase it by a measured amount in order to predict requirements. Monitor your resources and ensure you balance I/O, memory and processors. Since the OLAP option is a Enterprise Edition option it falls under Data Warehousing. As such there is plenty of literature available on oracle.com in order to define what it takes to achieve a balanced Data Warehouse.
    I would recommend contacting Oracle Consulting or an Oracle Partner to determine the best fit for your environment.

  • How to do screen enhancement in the selection screen of CS15 transaction

    Hi friends,
    I have a unique requirement where I have to do screen enhancement in the selection screen of CS15 transaction to get the top level material,
    Can you please tell how this could be achieved ?
    Looking forward  your valuable inputs.
    Thank You.
    Regards,
    S Sadhya

    Hi,
    This can be achieved by using user-exit. Specifically screen-exit. Check these two exits related to transaction CS15. They may be helpful to you.
    <b>
    PCSD0002      BOMs: Customer fields in item  
    PCSD0003      BOMs: Customer fields in header
    </b>
    Let me know if you need any other information.
    Regards,
    RS

Maybe you are looking for