How to decrease the battery consumption on my iphone 2g, 3.1.3

Hey,
  I recently asked a question that how to get rid of the turning off, of my iphone 2g!
someone suggested me to INSTALL a application called INSOMNIA, i installed the Insomnia on my iphone 2g, but unfortunately, it drains my battery within hours! I am really tired of this, even if i check my mail service or my messages after one hour! It drains my battery within hours!
and its really ***** to charge the cell phone every after 4-6 hours, as i am mostly not at home.
Please i need the best sollution for this problem! thanks in advance.
Peace

Then live with the battery drain or troubleshoot the original issue.
Installing an app to "rectify" an issue instead of looking ofr a real solution is frankly silly.
Remove the insomnia app and try restoring your device as new to see if that rectifies the shutdown issue.

Similar Messages

  • Has anybody figured out how to fix the battery consumption with mountain lion (using a MBP 13")?

    I upgraded to Mountain Lion, and yes despite all of the warnings posted in the App Store reviews about the battery life being cut in half, I upgraded my MBP anyway. Chalk this one up to the Black Cloud of "I Told You SO!" My MBP could hold a charge for almost 6.5 hours. Now I'm luck if I can get 3, but in most cases I may get 2.5 hours if I'm conservative.
    Has anyone figure out how to fix this battery problem? Even now after having it unplugged for almost 2 hours...I'm getting the "You are now running on reserve battery power" message. What a freaking joke!
    Any help would be greatly appreciated!

    Open /Applications/Utilities/Activity Monitor.  Click %CPU until the triangle points down beside it.  Make sure it says All Processes in the upper right.  Check for applications taking up lots of CPU time.

  • How apple solve the battery life bugs of Iphone 4s ?

    The battery life is extremely bad even though the operating system is ios 5.01.

    look here:
    https://discussions.apple.com/thread/3660196?tstart=90

  • Can't use WIFI and the battery consumption goes much faster

    I can't use WIFI after my iphone4s was updated to ios6.0  and the battery consumption goes much faster, how to solve ?

    This seems to be a problem relatet to the current versions of the app. After uninstalling Spotify I installed an older version, 2.8.0.1081, which worked perfectly with wifi. No newer versions seem to work so I hope there will be a fix soon. I've tried changing the UPnP as well as NAT filtering settings, but the newer versions of the app still wont work.

  • How to increase the battery life of your N series ...

    What I am about to post here is valid for any 3G phone or device regardless of model but it is particularly focused towards the N series devices and their power hogging features.
    Your battery life is dependant on many many things. How often you take calls on the device, the condition of your battery, the features you use on the device and so on and on. Therefore it is impossible to say that by following the information in this post you will get x amount of days battery life, but it will get you more time out of the battery than you otherwise would have got.
    So with that out the way, if your looking to increase your battery life then follow these tips and your battery should start looking a lot healthier.
    First of all lets start with THE big one. The one that is going to save you the most juice. Switching 3G off.
    Yep, you heard me right. Just by switching the 3G capability of your phone off you will add hours and hours to your battery life. How is this so? Allow me to explain...
    Due to the rather poor delivery of 3G in the UK by the network operators, it is rare for any 3G phone to maintain a constant 3G signal. Instead you will find that the phone constantly flips between 3G and GSM mode (Keep an eye on your signal one day). Even those of you on Vodafone who probably have the best 3G network coverage will find this is the case.
    Unfortunately, this constant flipping between the two modes sucks power from the battery like a vampire as it alters its reception state for the different modes and the constant flipping is..well...causing it do this constantly! It can sometimes even make your phone unavailable for calls for very brief periods as it trips from GSM to 3G and vice versa.
    If you need to use 3G for video calls or whatever then I'm afraid your just going to have to live with this but if you don't (And lets face it few of us do) then you can switch 3G off and increase your battery life considerably.
    To do this, go into the "Settings" application (Found in the menu somewhere, by default Nokia normally stick it in "Tools"), and then to the "Phone" tab. In there you will see an option that says "Network mode" and you have a choice of "GSM" or "Dual Mode" (I.e. UMTS and GSM). Set it to GSM and your phone will restart. Once it restarts it will be working in GSM with GPRS speeds only but really for most purposes this is fine.
    You have now just extended your battery capability considerably. You can further extend it by going to the "Connection" tab, going into "Packet data" and changing it to "When needed" so it is not constantly checking for a data connection.
    The second big change you can make is to turn your phones wifi scanning capability off. The last time I looked not all Nokia's phones that have wifi capability can have their wifi cards switched off entirely but if you can, turn it off except for when you need to use it. Wifi is a power hog.
    The next big change you can make is to lower the screen brightness settings on your phone. The less bright your screen is the less power is being used to light it up. Nokia by default leave the screen brightness at something like 50%. Lowering this a bit more will conserve more juice. Before you do this though please consider the fact that lowering the brightness setting will have a big impact on your ability to see the screen clearly in sunny conditions although you will be fine in the dark as you can't lower the brightness that far.
    To lower the brightness, go to the settings tool in your phone and into the display option (Hidden in a subcategory called "Personalisation" on the N95). It won't hurt to set the power saving time out to 1 minute and the backlight time out to 10 seconds while your here (Although these are the Nokia default so they should already be set to this).
    Finally in regards to the screen, although they may look pretty, animated screensavers use more battery power than the standard blank screen with time and date so avoid them if you can.
    It also helps to keep Bluetooth switched off until you need it although the power savings are minimal in comparison to the other changes but every little milliamp counts!
    Using the above methods I generally get about 3 to 4 days with about 3 hours talktime on my N95 without using Bluetooth, GPS or anything like that (I might be able to get more but so far I have not paid attention to the battery state before I put it on charge). If I am on a long train journey I can get about 4 hours worth of full screen video and about 2 hours talktime over the period of about 24 hours before it needs a recharge. As I said at the start of the post your mileage will vary greatly depending on how you use your device.
    Hope this helps.
    Useful links: Phone firmware update | Nokia support site

    02-May-200701:14 PM
    bixby wrote:
    no keffa it is a cop out from nokia
    its not unfai as its a premium device with a premium price
    the n95 battery is atrocious
    dont change the post content as the title is 'How to increase the battery life of your N series device'
    your talking about nokia phones specifically
    the networks are not to blame
    they do not make the handsets : Nokia do !!!!!!!!!!
    I'm going to choose my words carefully here...
    I would never deny the battery on the N95 is not really up to the job of powering the N95 with its power hungry features. To put the same battery into a phone that has WiFi, GPS and a large 320x240 screen, the same one that goes into the E65 which has comparatively nothing compared to it is a bit pants.
    However at no point was I criticising them for the band hopping problem. I labelled the post as how to increase the battery life of your N series device because this is a board for the N series devices. It was a simple choice of wording and not intended to be cutting in any way and I did make a remark that the details would be true of any 3G device at the top of the post.
    What I was trying to point out in my second post is that the constant band hopping the phone is being forced to do that is draining its battery so much more quicker than it would if it had a constant signal of one kind or another isn't quite Nokia's fault.
    They build it to conform to a laid out specification for 3G. However if the network operators cannot be bothered to roll out their 3G infrastructure adequately enough that the phone can find and remain locked onto a 3G signal that is usable then what are Nokia to do other than offer you the capability to turn 3G off until you need it (Although note to Nokia: That **bleep** reboot the phone does when you do this is entirely unneeded and you know it).
    Blaming Nokia for this would be like blaming the manufacturer of your radio for failing to pick up radio because the radio station does not have any transmitters within range of your radio's receiver.
    Finally...this band hopping is exhibited by all 3G phones built by Samsung, Nokia, Sony Ericsson, etc, from their most budget 3G model to their priciest piece and is the reason that all phones with 3G capabilities have batteries that do not last for any respectable length of time because these phones are also having to band hop between 3G and GSM.
    Finally the proof is in the pudding. Turn 3G off for a few days. See your battery improve. Then (Although admittedly this will be harder to do...mcuh harder) find an area where you get a fairly decent 3G signal constantly. Again, see your battery improve. Try it with a different 3G phone...different manufacturer even. The same will be true.
    So I stand by my comment, the network operators and their woeful 3G rollout are the villains costing you a fair chunk of your battery and Nokia cannot be expected to mitigate this....but a better battery would be nice all the same...
    Useful links: Phone firmware update | Nokia support site

  • HT4623 Hi!My iPAD lost its charge fast !!I've got an iPAD capacity 57,1GB and it has available 55,1GB ,version 7.0.4 .I'd like to know how long does the battery last when it is 100 % charged.

    Hi!I've just installed the iOS 7.0.4 operating system and the battery lost its charge at an incredibly speed.I'd like to know how long does the battery last if everything is right when it has 100% charge.Thanks!

    I`m `propping` up this thread to to the top of the forums again as it`s been three months and not a single community member or Apple support personnel have replied, which I find discouraging.
    I`ve tried everything - both the iOS device(s) and Apple TV have been upgraded (albeit reluctantly) to the latest versions, since iOS 7 looks like crap compared to iOS 6. Both use the same WiFi network. Bluetooth is set to `off`, as per the online tutorials on the Apple Support page.
    I also tried shutting all of them down, including the router, waiting 30 seconds and turning the router, then the Apple TV then the iOS device on sequentially with 30 seconds in between each, again as per this discussion forum, and still nothing.
    Why can Apple not make a technology, such as AirPlay, work with greater than 10%?
    Any other ideas?
    Come on, people.
    Thanks,
    Doug

  • I dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games)

    i dont know why the battery life of my iphone 4 is so low ! i really want to know how many hours i'll have if it's on standby. And how many hours if i use it normally for music and facebook (sometimes a little bit games) !!!

    to enhance your battery life, keep screen display to minimum, set screen lock automatically after 1 min, select internet notifications to off.

  • How to decrease the width of left column in the "2 column layout"?

    Hi all,
    I create two webdynpro based iViews in the EP, then I create a page use the "2 column layout(Narrow:Wide)".I put one iview in the left column and another iview in the right column. When I preview my page, I found the left column still too wide. So how to decrease the width of my page's left column?
    Thanks and Best regards
    Deyang

    Hi Deyang,
    You have to create your own layout:
    - Navigate to System Administration->Support
    - Choose Portal Runtime -> Browse Deployment
    - Navigate under pcd or under temp, and download the layouts par (com.sap.portal.layouts.default.par.bak if I recall correctly)
    - Import that par as a project to Developer Studio
    - Make your changes (create a new jsp acording to the existing examples, and update the portalapp.xml accordingly)
    - Export to par (in a different name!) and deploy
    - In the portal content: new from par -> Layout (don't forget to mark it as a template).
    - Your new layout template will now be available when you create new pages.
    good luck!

  • How to change the battery in my bluetooth

    i got the new one but don't want to harm the case to change it.a little help please.

    Hmm, a quick scan over the manual does not indicate how to change the battery.  But their web page has a contact tab which will open your email client to sent them email to [email protected]  I suggest you contact them and ask them (a) how to replace the battery and (b) if it is user-replaceable to update their manual accordingly.

  • How do I get the battery out of my iphone 3g?

    HELP, how do I get the battery out of my iphone 3g?

    iPhones are not designed to be user servicable.
    There is no reason to remove the battery.
    If you believe the battery is defective or no longer holding sufficient charge, take it to Apple for evaluation and possible replacement.
    Attempts to open the device by anyone other than Apple will void all rights to support from Apple.

  • How to see the battery usage

    how to see the battery usage? my unit is iPod touch 5 generation.
    Message was edited by: CatrinaRD_16

    CatrinaRD_16
    how to see the battery usage? my unit is iPod touch 5 generation. 
    Message was edited by: CatrinaRD_16
    iPod touch, iOS 6.1.1
    like Diavonex stated, you could use an app created to check the battery percentage
    but remember, google is your best friend =^)

  • How to change the battery in the imac wireless keyboard

    how to change the battery in the imac wireless keyboard?

    FYI, there is no "iMac" wireless keyboard. 
    If you have an Apple Bluetooth KB, simply remove the plug (screws out) on the left top side of the KB.
    Barry

  • How to get the materials consumption data

    Hi expert,
    My requirement is to show the material ordered, material received,material consumption,material stock against project definition...
    1. I got the materials ordered and material received against PO of that Project definition but they tell to show the materials got
    from another sites for that project definition.
    2. I have the mseg table for all datas for materials consumption and materials got from another sit e. i know only movement types and WBS
    .if i fetch the data from mseg using movement type and WBS means its not working.i dono how to get the materials consumption
    and materials got from another site.
    They seeing an entires in cji3 based on movement type and storage location.so only i tried to fetch data from mseg table using movement type and WBS
    but its not working.
    please tell ur views to get the data .
    Regards,
    Rathish

    hi,
    In MM module, one Tcode named MMBE will show you the material' information...
    However, from your description, PS/MM will be involved.The cluster table MSEG does hold the data of transaction...

  • HT2188 How to stop the battery from draining

    How to stop the battery from draining

    I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

  • How to know the battery %

    tell me how to know the battery % by any software i try many but no use ....

    It would help if you told us what phone you have. Normally for a s60 or better phone, you can just use Nokia Battery Monitor from Ovi Store.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

Maybe you are looking for

  • Mismatiching the Data in Reporting level.

    Hi Every One, I have ODS like ZMP_REL,THIS ODS FETCHING THE DATA FROM R/3 SIDE.AFTER GETTING THE DATA ,WHEN WE DESIGN A REPORT ON THIS ODS, IN REPORT THE DATA WILL BE MISMATCHED. EXAMPLE LIKE: I HAVE OBJECT LIKE:  ZADD1                               

  • Jetty not working on firefox

    I have a .js file that is part of a web-application. The web application is deployed on tomcat. This .js file in turn calls a .html file deployed on jetty. This .html file is responsible for starting the cometd service, but when i run my web-app, fir

  • PSE8 crashes when I try to email photos using Adobe Email Service

    The PSE8 Organizer crashes when I attempt to email photos.  In the 2 months that I have owned this program it has crashed several other times, but the current problem with emailing photos always occurs at the same step in the process.  I have read al

  • Help this newbie save her film UNSQUASHED before she loses her mind!!

    I'm working on my first project in FCP v6. Managed to work out everything except how to get the thing saved at a suitable size without it being SQUASHED. I've read just about everything I can find about this and tried all sorts of different settings.

  • 'Syntax error in template RSTMPL9C, Row 80'

    Hi, i am uploading hierarchy from a flat file! i got the error : 'Syntax error in template RSTMPL9C, Row 80' while scheduling thye info package! i tried with just one row to upload, since it was saying problem in 80 th row, but i am experiencing the