How to decrease width of spreadsheet tab?

In Numbers 3.1, is there a way to decrease the spreadsheet tabs that go across the top of a workbook? I have a few spreadsheets. They trail off to the right out of view because each spreadsheet tab is so wide.
I tried to drag the width but you can't.

Ok. A lot of people (including me) first thought you had to scroll with the left and right triangles at the right of the band, which is slow. Moving the cursor into the band and swiping left and right is much better for me.
As far as I know there is no control to reduce the minimum width of the tabs, though the width will expand to accommodate long names.
If it's important to you maybe give Apple feedback at Numbers > Provide Numbers Feedback in your menu.
SG

Similar Messages

How to decrease width of the dropdown bookmark panel (FF 11)?

How to decrease width of the dropdown bookmark panel (FF 11)?
This panel is too wide and covers too much space in underlying windows. The book marks text should not be truncated but some way needs to be found to allow the entire text of any line to be viewed when the cursor lands on it. Much of the information in "HELP" related to this question turns out to be very very old (essentially meaningless in 2012).

My bookmarks truncate, but only after many, many characters. Then you can view the full title, as well as the URL, in the mouseover tooltip.
To narrow the width of the bookmark menus:
(1) There might be an existing add-on targeted to this; I didn't search.
(2) You could create a custom style rule. One way to do this is to use the Stylish extension and add the following userstyle (create a blank rule first):
<br>@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#bookmarksMenu menupopup {max-width:15em;}
That works in my test, but you can tweak that maximum width to suit your needs. (1 "em" is about 16 pixels). Stylish can be installed from here: [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish :: Add-ons for Firefox].
(3) You could create a custom style rule in the file userChrome.css, which you can add to your personal Firefox profile. I didn't test it.

How to decrease line width in table in smartforms

hi i want to decrease line widht in tabel in smartforms.
how can i do.
thanks.

Hi
The width of the Line Type in a table is decided by table width itself. For example 20cm is the width of the table,then you can divide the table width into number of columns you want. If you want only 2 columns then,
next to the line type..one column width would be 10 and the other would be 10...so If you want to decrease the width of a column in the line type..then you would have to adjust that in the other one.
For example, If 10 and 10 cm each is what you have in your line type, then in the first column you can reduce the width to 5 cm and then increase the other column width to 15cm, in that way the total width of the line type will be equal to that of the table width.
Also, it is not necessary that the line type width should be equal to table width. It can be less also.
You can adjust the width at details tab..here you will have the table line type details like this:
Line Type 1. 2.
LTYPE1% 10.00cm 10.00 cm "here you can reduce the table line width.
Hope I am clear.
Regards,
Vishwa.

How to decrease the width of left column in the "2 column layout"?

Hi all,
I create two webdynpro based iViews in the EP, then I create a page use the "2 column layout(Narrow:Wide)".I put one iview in the left column and another iview in the right column. When I preview my page, I found the left column still too wide. So how to decrease the width of my page's left column?
Thanks and Best regards
Deyang

Hi Deyang,
You have to create your own layout:
- Navigate to System Administration->Support
- Choose Portal Runtime -> Browse Deployment
- Navigate under pcd or under temp, and download the layouts par (com.sap.portal.layouts.default.par.bak if I recall correctly)
- Import that par as a project to Developer Studio
- Make your changes (create a new jsp acording to the existing examples, and update the portalapp.xml accordingly)
- Export to par (in a different name!) and deploy
- In the portal content: new from par -> Layout (don't forget to mark it as a template).
- Your new layout template will now be available when you create new pages.
good luck!

How to change the individual width of a tab in a jquery tab widget?

I have a jquery tab like this:
But the default width for the tabs is too short for some of the tabs with longer names, causing this to happen:
Was just wondering how I could fix this?

Preview your page in a Browser like Chrome, Firefox or Safari. Use Right click > Inspect Element. Drill down to the Tab and see which selector contains a width property. It may be JavaScript driven so also examine the HTML source code for any inline styles.
Nancy O.

PLD: How to decrease Header along with PLD.

How to Decrease Header along with paper size from A4 to half (Width= 648 Hight= 432),

I am sorry, but I don't know the solution for your problem - like apparently the rest of the SDK community here.
This Forum is (mainly) for SAP Business One SDK.
For questions related to the B1 application itself and around customization the "Implementation" forum in the Channel Partner Solution Network (http://p2p.sap.com/businessoneforum) - or a message to SAP Support - would IMHO be the best options.
Thanks,
Frank
Message was edited by:
Frank Moebius
...but THANKS for the excellent subject you used! I am glad to see someone giving such precise information in the subject!

How to decrease the OLAP/DB and Frontend time of query

Hi,
While I am excuiting the query, it takes time to dispaly the query output. Reason behind is it have the high OLAP/DB and Front end time.
Can anyone help me how to decrease the OLAP/DB and Front end time.
Regards,

Probably Existing Aggregates are not useful .. you can edit them based on below factors
You can also check ST03N - > BI Workload - > select Weekly/Monthly - >Choose All data tab - >dbl click on Infocube - > choose query - > check the DB time % > 30% and Aggregation ratio is > 10 % then create aggregates.
Now goto RSRT choose query - > Execute debug mode - > check 'Display Aggr found' and choose 'Display Stats' -> now you can check records selected Vs records transferred in % .. it should be > 10 % .. That means the query is fetching records from Aggrs which will also improve query performance!
Also check RSRT - Execute in Debug and choose display aggregates found.. If it found aggregates then the query is using/fetching data from aggr's
Edited by: Srinivas on Sep 14, 2010 3:40 PM

How i can position my spreadsheet stuff left upper corner ?

How i can position my spreadsheet stuff left upper corner ? i always get small (but too big to my special needs,and even poorer i dont know how big this margin is) margin y-axis. ps. also same thing applies for Pages. I this special use i think both are suitable tools but looks like i must use numbers becouse in pages there is limits how many rows i can get.

Hi Jupeko,
Welcome to Apple discussions and the Numbers'09 forum.
I'm not sure exactly what you are asking here. Both Numbers and Pages start in the upper left corner of the page, but both also have tools that take some space across the top of the window and a sidebar of the left side of the window.
Pages will let you hide the format bar and the ruler (see the View menu) to reclaim most of the space at the top, and hide the Page Thumbnails running down the left side of the page (Uncheck the Page Thumbnails item in the View button's menu). Use the (Document) Inspector to set the margins to smaller values to move the content closer to the top left corner, and set the header and footer values to 0 if you are not using headers or footers.
Numbers will not let you hide the Sheets list on the left side, but you can make it take less space by dragging the square to the right of the word "Sheets" left toward the edge of the screen. As in Pages, the Format bar may be hidden (the ruler is hidden by default). Margins may be set in the (Sheet) Inspector.
On the screen, Numbers hides Print view by default, allowing you to scroll over the whole sheet without seeing page breaks.
PDF uses the page size set for the document fom which the PDF file was created. To get more rows in a table, you will need to either decrease the height of each row or increase the size of the page.
I hope that these comments do address your actual question.
Regards,
Barry

How can I insert a spreadsheet containing drop down boxes and links to other spreadsheets into a keynotes slide? Please help :(

How can I insert a spreadsheet containing drop down boxes and links to other spreadsheets into a keynotes slide? Please help
I need to retain all the formula's and the sheets these formulas are linked from.

Have you considered switching out of Keynote and over to your spreadsheet program when you get to this slide? If you launch the speadsheet program before Keynote you can switch using Command-Tab. You can then switch back into Keynote when you are done.
I realize that this is not what you were looking for but I don't think it is possible to do exactly what you want.

How can i print all the tab pages not just the first page (tab)

how can i print all the tab pages not just the first page (tab)

You would need to do this programmatically. Here's one way:
Attachments:
Example_VI_BD6.png ‏3 KB

I have Firefox 13.0. I have the homepage with the icons such as history, but I do not have the updated tabs.How do I get the updated tabs? Thanks.

I have just updated to Firefox 13.0. I have the AVG Secure Search on my browser or whatever it is that is where the search engines and refresh, and bookmarks icons are located. Even though on my add ons page it says it is disabled. But obviously it isn't because it still works. I have removed AVG Secure Search from the list of search engines in the drop down list in the search bar, but this did not solve the problem with my tabs. The Firefox website says that my Firefox is up to date, but if it is up to date why do I still have the same old tab page when I open a new tab? When I click on the plus sign to get a new tab, it takes me to about:Tabs and says on the screen "You've opened a new tab." Then it has a search bar and a button next to it that says "Web Search!" Then it goes on to say "With Tabs You Can..." So, how do I change my current tabs to the updated Firefox tabs with icons of the my recent tabs and websites I regularly visit. Also can you please provide detailed step by step ways to solve this problem. Thanks.

You only see items on the about:newtab page if the history is enabled and the browsing cache is working (stores thumbnails).
*Tools > Options > Privacy > Firefox will: "Use custom settings for history"
*http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox
You can check the current cache usage on the about:cache page and in Tools > Options > Advanced > Network > Offline Storage.

On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?

On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?
In my current Firefox, the "new tab" icon/item from the "customize" pop-up window menu of items is placed next to my home, back, forward buttons near the top-left of my header (Button 1 for "new tab"). Then, the tab bar automatically come with a small tab (with a + sign) to the right of your last tab opened (so you click on + and a new tab opens. Button 2 for "new tab"). I like to have this "new tab" button twice (as a + mini tab, and next to my "home icon".
When I upgraded to Firefox 4, I seemed to be only able to "customize" or use the "new tab" in one place. Either as an icon next to home button, or as a "+ minitab", but NOT both.
What can I do to put this button in Firefox 4 on BOTH places???
Your help is really appreciated. I want to upgrade, but I want my buttons on both places...
I upgraded to FF 4, but downgraded again just because this feature... that's just me of coarse :-)

*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

How do I import Map Info Tab files into Spatial for a map of europe?

How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
Any Help welcome :|
Tim

Tim,
MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
Andy Greis
CompuTech Inc.

How do i get a new tab to open up with my home page after i click on the + at the end of the tab

how do i get a new tab to open up with my home page after i click on the + at the end of the tab

problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

How do I make a new tab open all the say to the right, as it used to, instead of just to the LEFT of the last tab?

I have 6 tabs set up and have become very accustomed to the position they’re in. When doing a specific task for my job, a 7th tab opens up. It has always opened all the way to the right. When I’m done reading the information it gives me, I just quickly “x” it out to return working. Yesterday I noticed that this 7th tab was not opening up all the way to the right. It was opening in the next-to-last position to the right. This might not seem like a problem, but when I go to close it, I’m so used to x-ing out the one to the far right, that I’ve been x-ing out a tab that I need.
So the question: How can I get the new tab that opens to appear all the way on the right again? Again, this is not adding a new tab. If I add a new tab to search for something, it does open all the way to the right.
== I rebooted my computer a few days ago...

Type '''about:config''' in the URL bar and hit Enter.
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''browser.tabs.insertRelatedAfterCurrent'''
Double-click that preference to change the value to '''''false'''''

How to decrease width of spreadsheet tab?

Similar Messages

Maybe you are looking for