How to Default Appraisal Template in MSS Performance Management

Dear Friends
How can we default a certain Appraisal Template in MSS Performance Management Status Overview. We currently have
Appriasal Templatate I ( Used in 2008)
Appriasal Templatate II ( Used in 2009)
Appriasal Templatate III ( Used in 2010)
In the drodpwn in MSS, it is showing us in the Ascending Order. Default one is always the first one (Appraisla Template I). Since it is year 2010, we want to default it to Appriasal Template III OR is there a way to sort them?
Appreciate your help.
Sujatha

Good Day.
In standard, there is no any possibility to default an specif value for the template there. The values for the template are sorted in alphabetical order by default and the first value with be displayed there.
Thanks & Best Regards

Similar Messages

Transporting Appraisal Template in Predefined Performance Management

Hi all
I have created a transport for Category and Appraisal Template through transcation PHAP_CATALOG by right clicking onto the Object and selecting Transport. After creating the transport I have successfully transported it in the QAS.
Now, in QAS I am not able to view Appraisal Template in the Appraisal Catalog (Transaction: PHAP_CATALOG) while the Category exists in the catalog. I have checked the transported Appraisal template in transaction PP01and have found that the object exists in QAS.
Please advice on, why isnt the appraisal template being displayed and linked to the required category in Appraisal Catalog Transaction: PHAP_CATALOG). And what is the corrective action required.
Regards
Imran Ali Siddiqui

Hi Imran,
Please check note 1475428, it may help you find a solution to your issue. (note also that regarding the switch they must be set in both source and target system)
Hope this help
Sarah

How to unreleased Appraisal templates which are alreay being in used

Hi Experts,
I am looking for the solution how to unreleased appraisal templates which are already released and also used by the Employees for their PDD process.
We are facing one problem in PDD templates, so we want to make some changes in already released templates.
Is there any way or solution by any Functional method/settings or by ABAP program?
Please reply as it is very critical and important for us to solve ASAP.
Thanks & Regards,
Ashish Mehta.

Now that might work (actually it will work). But you need to be 100% sure that your changes will not infleunce the appraisal process. Because it is not that hard to cause unrepairable data inconsistencies on already existing appraisal documents!!
There is a very good reason for not being able to unrelease templates once they are in use!
One is that you can create incorrect appraisal documents from a business point of view.
Say your document end appraisal is a 1-10 scale, one being the worst. The appraisal gets a 3 as final score, meaning in this scale quite bad. Now you unrelease the template and change the used scale to a 1-4 scale. Your very bad employee turns all of a sudden in a quite good employee!
Even worse, you can create database inconsistencies on document level. Just remove elements or columns from the template and you will get very strange results after releasing again.
I don't recommend changing templates once documents are based on them but if you use this option then be carefull!
Regards and Groetjes,
Maurice

MSS Performance Management Error

Hi All,
I created MSS Performance Management iView in Portal. In this Page trying to create Appraisal Doucment and getting ESS Appraisal Docuemnt Page. Not getting Proformance Management Appraisal Page when clicking the button "Create".
I have done all the configurations as per SAP notes
1468466 Performance Management Launchpad Configuration
1463821 Performance Management Portal Configuration
1416756 OBN Configuration in Performance Management
1408243 Configuration for object-based navigation
Please help to resolve the issue.
Thanks
Risha

Hi,
In MSS Performance Management I am not getting error. While "Create" appraisal template through popup window getting ESS Appraisal Document window. It is pointing to this application HAP_START_PAGE_POWL_UI_ESS.
In SE80 , the create button pointing to "hap_main_document" application.
We need two iViews and I created new iViews for MSS - Performance Management(HAP_START_PAGE_POWL_UI_MSS) ,
Appraisal Documen(HAP_MAIN_DOCUMENT).
In Portal , why it is pointing to ESS Appraisal Document. Is there any OBN to set?
We don't have HTTP trace in our Client Browser. Please help me out.
Thanks
Risha

How to default the template based on a responsibility

Hello All,
I am working on 12.1.1 and XML Publisher version 10.1.3.2.1
I have a concurrent program with multiple templates, one each for different language/territory combinations. The layout of each template is different. In the template definition, I have different localized template files for each lang/terr combination
template_en_GB- UK
template_en_IE - Ireland
template_de_DE -Germany
template_sv_SE -Sweden
Template_en -Default
When the user submits the request, for UK, Ireland and Germany it picks the correct template as defined in the territory but for Sweden the template is always defaulted to the default template file in the template definition and the user needs to change it to their desired template each time. How do I default the template based on the language/territory of Sweden combination. It is working fine for all other territories buit not for Sweden. We have not used the add.layout option in any report so I don't want to use that option.
Is any setup I am missing for Sweden?
We are having Sweden rollout soon.
Thanks,
Joohi
Edited by: 935051 on 11-Jan-2013 03:09

if for other template it's work fine
then IMHO only SR

How to setup Appraisal Template in multiple languages?

Hi,
We are currently in R12.1.1.
We would like to setup appraisal template in multiple languages. For example,
Template 1 - English
Template 2 - Malay.
Appreciate guidance on how this can be done.
Thanks and Regards,
SC

Hi,
We are currently in R12.1.1.
We would like to setup appraisal template in multiple languages. For example,
Template 1 - English
Template 2 - Malay.
Appreciate guidance on how this can be done.
Thanks and Regards,
SC

Portal MSS - Performance Management

In MSS, we are trying to use the Performance Management link. When we click the link, we get the following message:
Please execute the report "RHHAP_PMP_CONFIG_MOVE". (See Note 1497373)
We have implemented the note. We run the report and get the message:
"Move Predefined Template/Process Configuration
Nothing to move! "
What needs to be done to get the Performance Management to work?
We are trying to implement performance appraisals. Is the Performance management the right place?

Hi Sheri,
did you also follow the second part :
In addition, a new Web Dynpro application is provided that you must still activate using the maintenance of services:
Transaction SICF: default_host->sap->bc->webdynpro->sap-> HAP_A_PMP_TIMELINE_2
Try to create a iview calling this webdynpro.
Regards,
Kai

MSS - Performance Management Document (BSP HAP_DOCUMENT)

Hello everyone,
For some reason, when I click on MSS -> TEAM, and navigate to the Performance Management Document, nothing is showing on the browser.
Only the pale blue color, nothing else.
As a assigned manager role, I have 2 document to evaluate, and I click on the number 2. But as I said, only a new windows with the title "Performance Management Document" and pale blue color opens.
I know this uses the BSP HAP_DOCUMENT, it is activated.
What is missing?
Regards!
Ricardo Sancio Lóra
Brazil

I am no more working on this issue

Push buttons doesn't show up in Appraisal template-(ESS,MSS)

Hi SAP friends,
I have template created with few sub-statuses and thus have created few push buttons to control the flow in ESS and MSS portal.
However I do not see any pushbuttons (or radio buttons) in ESS/MSS. Appreciate if you can guide me what all areas I was missing? Do we need to do anything in portal or Iviews? I read somewhere in forum that we need to do some thing in Iviews, but I was not convinced with it. Appreciate your speedy suggestions as we are in critical stage of project.
I have substatus created in In-Planning.
I'm not using In-planning status but using sub-status. Here is how I have mapped
Status flow at template level:
Outbout status - "In-PLanning"
Outbout substatus : Enter Objectives & Goals(Employee level)
PUSH BUTTON - Submit for Mgr review
Person Authorized - Aprraises
Target status : In- PLanning
Target substus - Manager Review

Hi
I think u are trying to go to previous status from sub status. From In Preparation you can come to In planning or the sub status of in planning.
Thanks & regards,
Vikas

Multiple Languages for Performance Management

Hello,
We are investigating how to allow multiple languages within the appraisal templates within our Performance Management application. Our users currently utilize a Portal entry into Performance Management where they are able to Create or Update their appraisals, all in English.
Is there a way to allow them to select a different language and then use a translator somehow? Is there anything delivered to handle this?
Any thoughts or ideas are greatly appreciated!
Mary Ann

Hi mary ,
Priya has pointed in the right direction .
PM appraisal template can be translated in any language maintained in table T002 .
around 41 different languages are supported by sap .
1) once you right click on the element and select the translation option , you would be asked for
target language .
2) On identifying the target language , a dual panned screen appears where you can have a look at
original and target language .
hope this helps
thanks,
sahiba

Transporting Appraisal Template

Hi
I have created the New Appraisal Template for 2015 review in Dev. Now i need to transport the Apparisal template into QA system. Do i need to create the transport for Category as well or directly i can create the transport for Apparisal template?
Thanks,
Umesh Sharma

HI Umesh,
The below should work.
IMG>>Personnel Management>>Personnel Development>>Objective Setting and Appraisals>>Transport Template and Dependent Configuration Data
Tcode: PHAP_TRANSPORT.
Enter the Appraisal Template ... include the Category, if required and provide the TR.
Once you execute, you will get list of all Appraisal elements (VA, VB, VC), choose required ones, and include them in the TR.
Please click on the 'i' button to read more about this report (Courtesy: SAP documentation).
With this program, you can transport all of the related objects and their related data to another system (such as a live system or client) for an appraisal template (object type VA) or appraisal process ((flexible appraisal process or predefined Performance Management process); (process element object type VH)).
Hope this helps..
Kumarpal

Appraisal Templates - Custom Web Dynpro developement

Hi All,
I have a requirement to display the new Appraisal document templates created using a Web Dynpro application.
How do I go about doing this? How can the Appraisal templates be exposed to the Web Dynpro application?
Regards,
Ashwini.

Hi Bhagat
You have raised a very good point,
As far as i know there is no such option available in NWDS ,there is a separate thread called
POLL: Web Dynpro UI elements - enhancement proposals
Please do post your same query there, hope SAP considers this, we all wait for the same feature in the forthcoming versions of NWDS
Regards
Chaitanya.A

Only 1 LSO Appraisal Template avail for assigning to HRLSO TEMPL

Hi
We are currently building LSO Training Management in SAP ERP 2005.
Objective Settings and Appraisals is also used concurrently.
The following appraisal templates has been configured in PHAP_CATALOG under Category Group SAP Learning Solution
Category Group / Category / Template
============================
SAP Learning Solution
 Training course appraisal: Classroom
 Classroom Training (standard SAP provided)
 Classroom Training - Anonymous (standard SAP provided)
 Customer Course Evaluation (customer specific)
 Training course appraisal: WBT
 Web-based Training (standard SAP provided)
I would like to set the default appraisal template to Customer Course Evaluation whenever I activate appraisals in transaction LSO_PSV2 from Participation > Appraisals > Create whilst clicking on the course.
In order to acheive the above, in the config setting for HRLSO TEMPL , I will need to assign the appraisal template.
The problem is the only appraisal template that allows me to select when I click on the search help is Web-based Training. Not any others.
Is there any config setting that needs to be taken care of so as to get the search help top pop up Customer Course Evaluation for my config selection as well ?
Thanks,
Gregg

Hi Gregg,
I tested the issue and after my investigation I found out the following:
I created a new template and did the steps you described. In the T77S0 i wanted to have the new template in the list while pushing the F4 on the switch HRLSO TEMPL, but only the one was shown which is the current...
I went to PP01, checked the Serial Number of the Appraisal template I created and entered it into the HRLSO TEMPL manually, than pushed "Save" -> it worked correct, no error messages came.
Now once again went back to the switch, pushed on F4 and there was the bug -> only the new template I created was on the list...
Thus our SAP internal systems are up-to-date with the newest patches, I suppose that this one is probably a system malfucntion.
I would like to suggest you to post an OSS message tot the SAP to the component of PE-LSO-TM. If our official investigations are done and the issue is considered as a failure, we will release for the customers an SAP correction note.
I hope this helps somehow converge you to the right solution!
Best regards,
Zsolt

Outlook notification in performance management

Hi,
In the steps of MSS-Performance Management, I m getting the notifications in UWL.It's working fine. The requirement is to get the email notification in outlook also. How to achieve this, any idea?
Thanks,

Thanks for your reply. I am following the below link;
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d5/581ee8d56f1247bf34cfcd66d16d81/frameset.htm
Please let me know is it the right way to achieve the notificaitons in outlook?
If so, I need an explaination on one point. In the link it says
Create the Configuration Settings Automatically
1. Execute the report RSWNUWLSEL once.
The Select Work Items screen appears.
2. Select Reset Configuration as the mode and FULL Filter as the filter.
If I reset config - what would be the impact. I don't want to mess up with existing workflow settings. Is it ok to do this?
Thanks,

Employee Performance Management System on SharePoint 2013

How can I create a simple Employee Performance Management System on SharePoint 2013?

Hi AnTiiika,
You question is a very open ended one, there are too many features that you have consider, without knowing your requirement it would be hard to answer.
you can consider the following OOTB features of SharePoint to start with-
Use SharePoint enterprise features -
http://technet.microsoft.com/en-us/sharepoint/fp142374.aspx
SharePoint BI -
http://technet.microsoft.com/en-us/library/jj542395(v=office.15).aspx
http://technet.microsoft.com/en-us/sharepoint/fp142398.aspx
http://office.microsoft.com/en-us/sharepoint-help/create-and-use-a-report-or-a-scorecard-HA102772329.aspx
Lists to store and manage data
External content type if you want to access data from outside SharePoint like SQL Server or other external datastore
http://msdn.microsoft.com/en-us/library/office/jj163139(v=office.15).aspx
Excel services
http://office.microsoft.com/en-us/sharepoint-server-help/business-intelligence-in-excel-and-excel-services-sharepoint-server-2013-HA102915300.aspx?CTT=5&origin=HA102772329
PerformancePoint
http://technet.microsoft.com/en-us/library/jj571736(v=office.15)
Reporting services
http://technet.microsoft.com/library/bb522712.aspx
for code approach -
http://msdn.microsoft.com/en-us/office/dn448478.aspx
http://sharepointdemobuilds.codeplex.com/
http://msdn.microsoft.com/en-us/library/office/jj163140(v=office.15).aspx
you can also consider new App model and develop apps using CSOM/JSOM/REST API for list based CRUD operations or for dashboards-
http://code.msdn.microsoft.com/office/SharePoint-2013-Create-a-20a03d84
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

How to Default Appraisal Template in MSS Performance Management

Similar Messages

Maybe you are looking for