How to define a BW system in Portal/VC 7.0

Hi Experts
Could you please update me step by step process on
How to define a BW system in Portal/VC so that i can use Services/FM in VC model.
Thanks in Advance

Hi
Check the below wiki.
https://wiki.sdn.sap.com/wiki/display/EP/SystemCreationin+portal
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoBWSystemthroughEnterprisePortal7.0UsinganIView.
Regards
Basheer
Edited by: Basheer on Jul 13, 2009 5:13 PM

Similar Messages

How to define a logical system in BD21 (RBDMIDOC)

Hi,
We have several logical systems in our distribution model (BD64/WE20) liked to CREMAS message. One other them is the X server, for instance.
When run BD14, it´s ok, because we can set the target system (X server in this case).
However, when we work with change pointers, the BD21 doesn´t have a target system field and it´s based on distribution model. So, it sends IDOCs to
all logical system. But we want to send to only X server.
Does anybody know how to define a target system in this case?
Best regards,
André Avilla
Brazil

Hi
Check the below wiki.
https://wiki.sdn.sap.com/wiki/display/EP/SystemCreationin+portal
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoBWSystemthroughEnterprisePortal7.0UsinganIView.
Regards
Basheer
Edited by: Basheer on Jul 13, 2009 5:13 PM

How to define an export system for a production system?

Hello:
I remember there is a way to define an export system for a PRD.
However I cannot recall exactly what to do: in transport profile or instance profile?
Could any expert help find out this?
Thanks with points!
Regards!

Hi,
Are you trying to configure CHARM? In that case, try setting the domain controller as the production system and keep CTC=1.
This should help.
Thanks,
Rinkal

How to find the backend system in portals

Hi Gurus,
How to determine the number of backend systems referred in portals.
Higher points will be rewarded for useful inputs.
Thanks in Advance,
Dharani

Hi Dharani,
if u have the system Administration role,
u navigate thro System administration -> System configuration -> System landscape Overview.
this iview will list all the system created for connection.
If u want further clarification , feel free to raise q in forum

How to define a BW/BI system in Portal using BI SAP Query Connector.

Hi,
How to define a BW/BI system in Portal using BI SAP Query Connector.
Portal>System Administration>System Configuration-->Portal Content >New System (from PAR)>com.sap.portal.systems.bi-->
How to retrive the parameters required from a BI 7.0 System.
Thanks

Hi,
You can refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/b0c8ce704d40fbb18312f8e65b4b0b/content.htm
Hope it will be helpful.
Best Regards,
Assaf Klieger

Define system on portal J2ee server in SYSTEM CONFIG -- SLD error

Hi,
Can , any body tell me how to create a system on portal J2EE server in which bussiness package has implemented.
WAS properties for the system as
WAS host name:<j2ee name> : <port>
WAS Path:/ webdynpro/dispatcher/
wAS protocol :HTTP
I have tried to create system in System admin--> System configuration --.>SLD .But it is showing following error
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (XX.XX.XX.XX:50000)
5. The host name XX.XX.XX.XX was resolved successfully.
6. The Web AS ping service http://XX.XX.XX:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://xx.xx.xx:50000/webdynpro/dispatcher/ was not obtained successfully; this might be due to a closed port on the Firewall.
Why it is checking R/3 connection setup like sap/bc/ping and other connection . Iam creating WAS connection for java only.Even iam not define any related properties on this system.
Regards,
Eswar.

Hi,
in your ABAP system, open transaction SICF, F8, and go activating the required services :
Default Host > sap > bc > ping. Right click on it and choose "Activate".
This will normally solve your point 6 error.
For point 7 I might think of a port error, can you tell us if your system is load balanced ? if yes, your port defined in your system in the PCD in the connector category hase to be 3600. If not load balanced : 3200.
If implementing SSO, also check in the RZ10 transaction that your default profile contains those parameters :
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = server_host_name.domain.com.
Fabien.

How to make automatic backups of NW Portal systems?

Hi All,
We have SAP CRM, ECC and NW Portal using MaxDB databases.
For DB Backups and monitoring, we are using Database Studio.
But in this DatabaseStudio, we have no calendar and no automatic backups is possible. In SAP ECC and CRM, we can access the tcode DB13 which give us acces to the DBA Planning Calendar.
Connecting on ECC or CRM backends, we can then plan automatic backups.
But for Portal I dont' find how to use a calendar for automatic backups.
I saw that in DB13, you can select the system you want to backup. Would it be possible to add the Portal and to manage all systems, including portal, in on single backend point? If yes, how can I add portal system / db to this DB13 menu?
If not, do you know if there is any other way to have automatic backups of NW Portal? Or any external tool we can use for doing this?
Thank you in advance for your help,
Xavier Monnet.

> But for Portal I dont' find how to use a calendar for automatic backups.
>
> I saw that in DB13, you can select the system you want to backup. Would it be possible to add the Portal and to manage all systems, including portal, in on single backend point? If yes, how can I add portal system / db to this DB13 menu?
You can put any database in DBACOCKPIT and schedule centrally using DB13C.
> If not, do you know if there is any other way to have automatic backups of NW Portal? Or any external tool we can use for doing this?
For bigger production environments I'd suggest getting an external backup too and schedule everything centrally.
Be aware that especially in a Java environment (such as a portal) it's not enough to just backup the database, you have to backup the filesystem content at the same time to be able to restore your system in case of a failure. If you have just the database backup this won't help.
Markus

How do we import business systems defined in the SLD to IB:configuration...

how do we import business systems defined in the SLD to IB:configuration...

hi,
go to Scenario tab, Object -> New , Select the configuration scenario enter the configuration scenario name then save.
Expand Service without party ->Select the business system and right click click on next, next select your business systemd.
IF business system not appeared in ID..go to Environment -> Clear SLD data cache.
again try to assign the business system.
Regards,
Venu.

How to create 'system' in Portal for backend

Hi Basis Gurus,
Please let me know how to create a 'system' for a backend system in Portal 'system administration' --> 'system configuration' --> 'system landscape'.
i.e. which properties I need to fill up, assuming the backend system is release 700 ABAP system and Portal is at release 640.
Thanks & Regards,
Kunal.

Hi,
Please check the following links..
[Creating Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/ec/0fe43d19734b5ae10000000a11405a/content.htm]
[Editing Systems|http://help.sap.com/saphelp_nw70/helpdata/EN/42/11e43d19734b5ae10000000a11405a/content.htm]
Regards,
Murthi...

How to integrate Solution Manager system to Enterprise Portal

Hi all,
HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

Hi,
First establish SSO between portal and solution manager.
make the iview from com.sap.portal.epsolman.EPSolman
check the link for help
ep and solution manager support desk
Thanks
Santosh

How to create a connection between EP-Portal and BW system

Hi friends ,
Can you pl expalin me How ro connect EP to BW ,I have created an Iview in the portal to get some BW data using BSP application .How to assign Iview to system object ? and what are parameters i need to give in the system object .
Thanks,
Sunitha Reddy

Probably better asked in the PORTAL forum. But anyways...
Create iView for BI.
Assign BI iView the ALIAS of your BI system (this assumes you created a BI system object previously and assigned it an alias)
Just that easy.
If you are on BI 7, then your BI might have it's own portal and you can create a federated portal network between BI and your portal. It works GREAT and is easy as cake.

How to define the PSA in source system

hi ALL:
when i double click the datasource in the source system's datasource overview , there is an message of "Transfer method 'TRFC with PSA' is not supported by the source system ", and prompt me to define the PSA in source system , but i did not known how to define the PSA in source system .can any one tell me.
thanks a lot!

Hi
This becuase of RFC connection problem
go to rsa1>right click on youe sourcesytem>>check
if the connection is not good,contact your basis
cheers,
Swapna.G

How to add Friendly URLs in Weblogic Portal?

Hi,
We are developing a portal using Weblogic 10gR3. Right now the URL's that are getting formed are very long which includes the nfpb, nfls, pagelabel e.t.c. The requirement is to have a very user friendly url something like http://www.x.com/portal/<<pageLabel>>
The Weblogic documentation mentions something about URL compression, however unable to apply it for dynamic URL's. We have URL's which are formed on the fly from the WLP Content Repository
Is there some kind of servlet / filter provided within WLP. I read somewhere about an URLTransformationServlet. But there was no documentation on its usage. Can some one share a sample code snippet with me. That would be really really helpful, as we are having a slight time crunch here.
Any kind of help on this will be deeply appreciated. Thanks
Thanks and Regards,
Lilly

Dear Team,
Please help us in Change Portal Url . Please find below details and help us asap.
Regards
Radhakrishna
Generic Note
I understand [email protected] looks after your account and he should be able to assist you in this matter.
You could possibly post your question to the oracle forums, like below
How to add Friendly URLs in Weblogic Portal?
[email protected] - November 1, 2010 7:05:03 PM GMT+05:30 [Update from Customer]
Dear Team,
Please let us know how to contact the assigned oracle account manager to engage someone from the professional services team.
Please update us asap.
Regards
Radhakrishna
Oracle Support - November 1, 2010 5:28:59 PM GMT+05:30 [Information]
Generic Note
I would suggest you contact the assigned oracle account manager to engage someone from the professional services team.
[email protected] - November 1, 2010 4:55:25 PM GMT+05:30 [Update from Customer]
Dear Team,
How to engage oracle professional services to team to get assistance.
Regards
Radhakrishna
Oracle Support - November 1, 2010 1:48:49 PM GMT+05:30 [Information]
Generic Note
As mentioned earlier, changes to the portal url is not provided out of box, the documentation link that I provided mentions a possible way of achieving this by creating a start up servlet, this may or may-not work in all circumstances. If the suggestions provided so far has not helped you so far, I would recommend you engage oracle professional services team to get assistance.
[email protected] - November 1, 2010 1:36:12 PM GMT+05:30 [Update from Customer]
Dear Team,
Please find below comments from Dev team.
While try to incorporate the URL navigation changes at
our development environment we are getting exception Unable to render /framework/skeletons/bharti_skeleton/singlelevelmenu.jsp .
I have also checked feasibility for the URL navigation changes provided and will not work for left menu
and footer URL because while rendering these URL we are not using single level menu jsp or multilevel menu jsp.
Please check with these comments and update ASAP.
Regards
Radhakrishna
[email protected] - October 28, 2010 7:56:02 PM GMT+05:30 [Update from Customer]
Hi,
regarding making changes to the url meets ,we are working on the document which you have provided.we will update with result onc it get finished.
Regards,
Eranna D.
Oracle Support - October 28, 2010 7:06:32 PM GMT+05:30 [Information]
Generic Note
Since your question about Rich Text support in CMS is not related to portal urls, I would request you raise this as a separate issue.
In the new SR, please elaborate what you mean by the Rich Text support, whats your proposed use case, whats working and what is not.
Could you also confirm if the further information I have provided regarding making changes to the url meets your requirement.
[email protected] - October 28, 2010 7:04:48 PM GMT+05:30 [Update from Customer]
CMS----Content Management System
Rich contents are : Media files, Vedios, Movies... etc.
[email protected] - October 28, 2010 6:58:46 PM GMT+05:30 [Update from Customer]
Hi,
Can you please clarify the below point also.
"Please confirm whether CMS support Rich Text in weblogic , currently we have the weblogic version 9.2 . Plz confirm whether it will support or not."
Regards,
Eranna D.
Oracle Support - October 28, 2010 5:41:53 PM GMT+05:30 [Information]
Generic Note
The following documentation http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/url/simplify.html tells how you can achieve the simple urls you are looking for.
Could you let me know if this meets your requirement.
[email protected] - October 28, 2010 12:07:05 PM GMT+05:30 [Reopen Request]
Hi,
Please clarify why it is not possible to remove nfpb parameter.
Call Me on +91 9686971269 ASAP.
Oracle Support - September 29, 2010 5:39:48 PM GMT+05:30 [ODM Answer]
=== ODM Answer ===
weblogic portal does not provide any out of the box way to achieve this functionality
Oracle Support - September 29, 2010 5:39:15 PM GMT+05:30 [ODM Question]
=== ODM Question ===
need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Oracle Support - September 25, 2010 4:42:01 PM GMT+05:30 [Information]
Generic Note
WLProxy configuration falls under the weblogic server product hence you will have to raise an SR with that product to get any suggestions.
Before that I would suggest you play around with the parameter I have suggested and see how it is impacting the url and then if there is any specific area you are stuck on check with the WLS team.
Like I mentioned earlier, I do not know if this will completely meet your business requirement, but something you can look into.
[email protected] - September 25, 2010 4:32:00 PM GMT+05:30 [Update from Customer]
Hi,
Can you please brief us what all are the changes needs to be done to meet our below requirement.
Regards,
Eranna D.
+91 9686971269
Oracle Support - September 24, 2010 9:00:57 PM GMT+05:30 [Information]
Generic Note
URLCompression servlet is the only option that weblogic portal provides out of the box to compress the URL of WLP. I understand this does not suite your requirement.
The other option I can think of that can possibly help you achieve this is to configure any weblogic proxy plugin that you might be making use of, see the document
http://download.oracle.com/docs/cd/E15051_01/wls/docs103/plugins/plugin_params.html#wp1143055 look for PathTrim, PathPrepend
[email protected] - September 24, 2010 5:41:39 PM GMT+05:30 [Update from Customer]
Hi,
Please call me on +91 9686971269 ASAP.
Regards,
Eranna D
[email protected] - September 24, 2010 5:41:22 PM GMT+05:30 [Update from Customer]
Hi,
Even thogh after implementing the below changes,still we are not able to get the result. " nfpb parameter is still existing in URL ".
Implementing URL Compression :
To configure a webapp to use url compression, follow these steps:
1. Define the compression servlet in web.xml; for example
<servlet>
<servlet-name>UrlCompressionServlet</servlet-name>
<servlet-class>com.bea.portlet.compression.UrlCompressionServlet
</servlet-class>
<init-param>
<param-name>defaultPage</param-name>
<param-value>/index.jsp</param-value>
</init-param>
<init-param>
<param-name>errorPage</param-name>
<param-value>/errors/error.jsp</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
2. Map the compression pattern; for example:
<servlet-mapping>
<servlet-name>UrlCompressionServlet</servlet-name>
<url-pattern>wlp.c</url-pattern>
</servlet-mapping>
3. Add the token {url:compression} to the templates for which you want to apply compression.
Please suggest on this ASAP.
Regards,
Eranna D.
[email protected] - September 24, 2010 5:27:58 PM GMT+05:30 [Customer Problem Description]
Problem Description: We need to change the URL
http://hostname:port/ics_war/ics.portal?_nfpb=true&_pageLabel=Tariff
to
http://hostname:port/ics_war/ics.portal/Tariff.
Pls suggest on this.
Regards,
Eranna D.

Creatins BW system in portal

i installed portal sneak preview sp16 version in my local machine and now i want create a BW system in my portal
the thing to be noted here is my BW system is in different
country i am connected to the network by vpn from my country
and i am able to login in to the BW system from machine through sap logon
so i went to portal
System Admin --> System Configuration -->. Portal Content
and i created the system by taking sap load balancing system
but my connection test failed
so wat i felt there i missed some system lanscape procedure
so any body help me how to configure portal from scratch
from lanscape to system creation .
thank u

HI
Follow this to configure BI with Potral
1.Click on System Configuration menu option from your toolbar. Go to Portal Contents on System Landscape
   iView.     System Administration -> System Configuration -> Portal Contents
2.To start with configuration of system, Right click on Portal contents and select New -> System from PAR.
3.System Wizard will prompt you to select required default system template in step 1.
   Choose *com.sap.portal.system.bi* for BI system.
4.In step 2 choose a portal component which is to be used to connect to BI system Choose SAP_BI_XMLA
5.Define System Name and System ID which are mandatory and will be used for further reference to maintain
   connection settings for BI system in portal.
6.Your system object is created and choose Open the object for editing and Click OK
7.Next screen will give brief information about object created.
8.Choose Connection Properties from Property Category drop down to maintain connection properties for BI
   system.
9.Provide BI server name as Data Source Provider.
   Enter server URL which can be generated using BI server and steps are mentioned below.
10.Logon to BI server with required username and password credentials.
   Go to T-Code SE37 (Function Builder).
   Enter system defined function module RSBB_URL_PREFIX_GET and execute directly.
11.Put Import parameter values to generate server URL for the system.
    I_HANDLRCLASS = CL_RSR_MDX_SOAP_HANDLER
    I_PROTOCOL = HTTP
    I_MESSAGESERVER = X
    Execute Directly (F8).
12.You will get following Export parameters as result where values of E_URL_PREFIX & E_URL_PATH are
    required URL.
   Prefix E_URL_PREFIX at E_URL_PATH to get complete URL.
13. Now back to portal
   Choose User Management from Property Category and maintain Logon Method as UIDPW and select User
   Mapping Type admin,user.
14.Choose Show all from Property Category to check entered values
15. After maintaining connection settings, System Alias needs to be maintained for created system. Using this
   system alias we can access this system through our applications.
   Select System Aliases from drop down list available under Display options.
16.Define an alias name and click on Add.
17.Created Alias will come under the list of defined aliases.Click Save.
18. Go to user administration and Choose User Profile to maintain user mapping parameter with respect to BI system. Select User Mapping for System Access Tab.
19.Select your system alias which is created in previous steps.Click on Modify button to maintain details.
20.Enter User ID and Password for BI server and Click on Save.
21.System configuration process is complete and now you have to Test Connection to assure its connectivity of
   EP to BI system.Choose Connection Tests from Display dropdown menu.
22.Tick the Check box for available system connector and click on Test to perform selected connection test.
23.Upon correct maintenance of connection parameters system results as connection successful.
24.Now your Business Intelligence system is configured and successfully connected to Enterprise Portal.
It is ready for use.
Happy Practiceu2026
Mandeep Virk

Error while creating a system in portal

Hi,
Iam trying to create a technical system(SAP System with Load Balancing) in the portal.When i try to test the connections im getting the following error:
The WAS ping service (http://hostname:portnumber/sap/bc/ping) was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
Can anyone please tell me how to resolve this?
Please suggest.
Regards,
Padmalatha.K

Hi,
Pls check out these links on SLD-
Steps to configure R/3 system to Portal implementation
Configuration Guide for R/3 in SLD as backend system
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
/community [original link is broken]
threadID=484726&tstart=0
Regards
Lekha

How to define a BW system in Portal/VC 7.0

Similar Messages

Maybe you are looking for