How to define a changing variable in Broadcasting.

I would like to run bex web report in background using information broadcasting in bw 3.5. I setup all required settings and it is running fine. But I would want the broadcaster should take changing variable (example: date or fiscal period etc) based on the execution date or other condition. (please note that this is not for including date and time etc in description).
I want broadcaster should take current date or date range or fiscal period as variable (selection screen) while running the report. I have tried using filter variable tab in broadcaster. But it was taking only static dates.
pls suggest.
Thanks in advance.

Could you please tell me in detail. Which user exit variable you have mentioned? I am already using user exits (code in CMOD) for variables in query and it is working fine.
Now, I want to run the same query in background using information broadcasting. When i run the query it asks for user input (for example: date etc). I enter the current date and execute the report. But I dont want to enter current date each time. Instead i want to execute them in backgroun and system should take values by itself.
Correct me if I am wrong. For this you suggested me write one more user variable where it will populate variable values for backgroun (not used in query)? pls reply.
Thanks, points assigned.

Similar Messages

Portal: how to define new text variables for information broadcasting

Hello everybody,
I hope the post here is placed on the right position. If not, please try to advise me, where to ask to get answer on following question:
-> In BI Portal -> tab Business Intelligence -> Bex Broadcaster -> it is possible to create PDF and post it somewhere into Portal or any other network drive. That's fact. I'm searching for possible enhancement of the F4 help next to the field "data name". There are available only following few variables <OBJECT_ID> <SETTING_ID> <OWNER_ID> <PROCESSED_BY_ID> <LANGUAGE_ID> <DATE_ID> <TIME_ID> <WEEK_ID> <MONTH_ID> <QUARTER_ID> <YEAR_ID>
We are facing this issue: generated analysis file is valid for the period from month 01 to month actual-1. So therefore I would like to implement my own variable.
Do you know guys, where to define this own variable with own logic?
Could you please give me some hints how to create a new one and fill the logic?
Thank you very much in advance
Stan

Not resolved. Life goes still on.

Define and change variables without redeploy

Hello there,
what i want to accomplish (and have tried in vain so far) is to define a variable 'jndi_url' for my web application and change the value for that variable without redeploying the application or restarting the weblogic server.
When i set the variable for example in the web.xml everything works, but to change the value i would have to redeploy the application. :-(
Then i experimented with a deployment plan, but that seems to configure only a predefined set of variables, like the session timeout, etc.
I thought this should be a simple task and i hope somebody can help me out.
Thanks for any answers to this!

david,
back to the root of my question:
I do use an 10 years old low-end sql / plsql-tool where I can simple and fast do sql-things like that:
select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'for_example_ABCD':
select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
I would like to use oracles SQL-Developer instead of this 'old' tool,
and want to use my 'old' sql / plsql scripts
but the SQL-Developer in this matter seems is to much complicate to use,
I can do complex and big things with sql-dev,
but not simple using bind-variables ;-)( .

How to define a public variable in webDynpro ?

Dear All,
    I want use a variable between 2 methods.but don't know how to do , There are my part Error code ,
public class TestHtml
public String mystr1 = "";
public void wdDoInit()
    mystr1 = "0123";
public void onActionExportIE(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    String mystr2 = mystr1 + "b";
when I click save button ,
"public String mystr1 = ""; disappear .
can you help me ?
thanks!

Hi Doke,
The best way to declare public/private variable is to declare it on global area
Declare it at the end of view where you can see this begin and end part
Inside (As shown below) it will treated as golobal variable, which can reuseable
Anywhere within your iview.
//@@begin others
    public String mystr1 = "";
//@@end
It will solve your problem.
Thanks
Anup

How to define an updated variable in java?

Hello,
What i am trying to do is to have a variable that keeps its value updated when the program execuation finishes For example
public class class1
private static int x =0;
main()
x++;
Run 1 ..... x = 1;
run 2.........x =2;
run 3........x =3
I know that you can do that in VB using static variable? Is there the same thing in java? if there is not , then how can i know how many times my program runs?
Thanks

What i am trying to do is to have a variable that
keeps its value updated when the program execuation
finishes For example
public class class1
private static int x =0;
main()
x++;
Run 1 ..... x = 1;
run 2.........x =2;
run 3........x =3
I know that you can do that in VB using static
variable? Is there the same thing in java? if there
is not , then how can i know how many times my
program runs?
ThanksCreate a class with static int x that extends Serializable, call it SaveX. Make setX and getX static methods for SaveX.
When executing your program deserialized SaveX. If the deserialization process gets an FileNotFoundException or IOException then instantiate the SaveX. That is your initial execution.
Increment x. For example:
int myX = SaveX.getX();
myX++;
SaveX.setX(myX);Serialize the class.
Each time the program is executed x will be incremented and saved. The first execution start x at zero and saves the first serialized class.

How do I use bin variable in package without asking a user?

hi,
I would like to write an SQL but I want to use bind variable in package as a static without asking user? Like below?
I would like to ask you, below there is a emp_id variable? Is this BIND variable?
DECLARE
bonus NUMBER(8,2);
emp_id NUMBER(6) := 100;
BEGIN
SELECT salary * 0.10 INTO bonus FROM employees
WHERE employee_id = emp_id;
END;
If not, like this SQL how can define a BIND variable as static inside a code? not asking a user?
db version. 9.2.0.8
regards and thanks

OracleADay wrote:
I would like to ask you, below there is a emp_id variable? Is this BIND variable?
DECLARE
bonus NUMBER(8,2);
emp_id NUMBER(6) := 100;
BEGIN
SELECT salary * 0.10 INTO bonus FROM employees
WHERE employee_id = emp_id;
END;
/In the query "SELECT salary * 0.10 INTO bonus FROM employees WHERE employee_id = emp_id" emp_id is turned into a bind variable because
if you are coding static SQL in PL/SQL then PL/SQL wil automatically use bind variables: please read http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/overview.htm#sthref145.
This can also be proved with SQL trace. The following code:
alter session set sql_trace=true;
declare
v number;
c number;
begin
select count(*) into c
from t
where x=v;
end;
show errors
alter session set sql_trace=false;generates following raw trace file section with 10G XE:
=====================
PARSING IN CURSOR #2 len=79 dep=0 uid=69 oct=47 lid=69 tim=33338762257 hv=2860574766 ad='3c10120c'
declare
v number;
c number;
begin
select count(*) into c
from t
where x=v;
end;
END OF STMT
PARSE #2:c=46800,e=329811,p=0,cr=9,cu=0,mis=1,r=0,dep=0,og=1,tim=33338762253
=====================
PARSING IN CURSOR #1 len=35 dep=1 uid=69 oct=3 lid=69 tim=33338788761 hv=3539261652 ad='3c10053c'
SELECT COUNT(*) FROM T WHERE X=:B1
END OF STMT
PARSE #1:c=0,e=216,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,tim=33338788755
=====================Edited by: P. Forstmann on 17 mai 2011 17:47
Edited by: P. Forstmann on 17 mai 2011 17:55

How to change variable values ?

Dear friends,
How to change variable values when we are broadcasting the Queires ?
Do we need to change them everytime ?
Thanks,
N

Hi,
Please go through it.
/people/ramkumar.ghattamaneni/blog/2008/02/25/using-variables-while-broadcasting-queries-to-the-portal-in-bi-7
Regards,
Ramkumar.

How to define variables in toad sql script editor - newbie

I have just pull out the script of a Function and want to run it on toad SQL editor.
I am little bit confused how to define the VARIABLEs here in toad SQL editor to run my script.
SELECT
NVL(SUM(debit), 0) - NVL(SUM(credit), 0)
INTO l_accountBalance
FROM
GLP_VoucherMaster vm
INNER JOIN GLP_VoucherDetail vd ON vm.GLP_VoucherMaster_ID = vd.GLP_VoucherMaster_ID
INNER JOIN GLP_ChartOFAccounts coa ON vd.GLP_ChartOfAccounts_ID = coa.GLP_ChartOfAccounts_ID
WHERE
vm.isActive = 'Y' AND vd.isActive = 'Y'
-- *** how to define variables in toad sql script editor ***
AND vm.voucherDate < p_cDate
AND coa.AccountCode LIKE p_accountCode || '%';
Thanks
w\

Just prefix with a colon (:)
SELECT   NVL (SUM (Debit), 0) - NVL (SUM (Credit), 0)
INTO   L_accountbalance
FROM           Glp_vouchermaster Vm
             INNER JOIN
                 Glp_voucherdetail Vd
             ON Vm.Glp_vouchermaster_id = Vd.Glp_vouchermaster_id
         INNER JOIN
             Glp_chartofaccounts Coa
         ON Vd.Glp_chartofaccounts_id = Coa.Glp_chartofaccounts_id
WHERE       Vm.Isactive = 'Y'
         AND Vd.Isactive = 'Y'
         AND Vm.Voucherdate < :P_cdate
         AND Coa.Accountcode LIKE :P_accountcode || '%';
/:p

File Sender, Content Conversion - how to define variable length last field?

XI 3.0 SP17
With a File Sender communication channel, that uses Content Conversion - how do I define a 'variable length' last field?
The scenario - the input file has four fields, of which the first three are a known fixed length, and the last (fourth, trailing) field is variable in length.
Using a Message Protocol of 'File Content Conversion', how do I define that last variable length field (field name 'WOData' below) in the Content Conversion Parameters section?
My current parameters are:
Recordset Structure - Row,*
ignoreRecordsetName - true
Row.fieldFixedLengths - 1,12,5,99999
Row.fieldNames - WOType,WONum,WOLine,WOData
I've tried the following for 'Row.fieldFixedLengths' to no avail -
'1,12,5,*'
'1,12,5,0'
'1,12,5,'
'1,12,5'
The last two were grasping at straws )
The only thing I've got to work is specifying a 'large' value for the final field (99999 above).
In addition, does anyone know if specifying a large value (e.g. 99999) for the final trailing field will give rise to performance issues when the file is being processed?
In the help for "Converting File Content in a Sender Adapter", it states -
<Begin Quote>
NameA.fieldFixedLengths
If you make a specification here, the system expects a character string that contains the lengths of the structure columns as arguments separated by commas.
If you also specify a separator for the columns, you must not add its length to the length of the columns.
This entry is mandatory if you have not made an entry for NameA.fieldSeparator.
<End Quote>
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

<< note that fieldFixedLengths will not take any wildcard entries like *. So in these case it is ideal to provide a maximum char length. But note that while the file is being created that many spaces will be created in your file !!! >>
Hi Shabarish,
Yes, no wildcard is the conclusion I came to, hence my maximum )
The message size did not increase by any 'blank padding'. When I look in [Message Display Tool (Detail Display)] 'Audit Log for Message: X' -
2006-10-17 18:22:42 Success Channel X: Entire file content converted to XML format
2006-10-17 18:22:42 Success Send binary file "X" from FTP server "X", size 103290 bytes with QoS EO
2006-10-17 18:22:42 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-10-17 18:22:42 Success Trying to put the message into the send queue.
2006-10-17 18:22:42 Success Message successfully put into the queue.
2006-10-17 18:22:42 Success The application sent the message asynchronously using connection AFW. Returning to application.
The input flat file in non-XML format was 92,132 bytes and the message payload into XI was 103,290 bytes.
My understanding is that trailing spaces are stripped from XML nodes.

How to define variable for value range in Bex Query?

Hi
How to define variable for Keyfig. value range on runtime like characteristic in Bex Query?
Example: On runtime user select one of the following condition:
1)User want to those records where amount is greater than $1000
2)User want to those records where amount is greater than $1000 and less than $5000
3)User want to those records where amount is greater than and equal to $1000

Hi ,
Need to Use exceptions & conditions for this scenario's & need to create variable for exceptions based on condtions.
Below document provides steps how to make selections at run time for a kfg.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e?QuickLink=index&overridelayout=true&48842368468641
Regards,
Seshu.P

How to define new variable types in BPEL?

Is there a way to define a new variable type directly in BPEL, without modifying any of the WSDL files used by Partnerlinks?
Or to import an XSD with variable definitions?

It depends on what you want to use the variable for. You may not need to do it yourself. Let's assume you have a main wsdl for your service that you can't change but it has the inputs and outputs already defined.
In the middle you want to grab the input and shove it into a database table. You can create a new partner link. Rright click in the swim lanes on the BPEL page and pick the little database icon. Go through the steps to link to the db via an insert or package. You will need a db connection to do this.
jdeveloper will create the partner link wsdl and schema for you to match the table or the ins/outs of the package/procedure automatically.
Then drag an invoke onto the page and pull the arrow to your new partner link. Use the magic wand on the invoke screen to create the input/output variables.
Then you can use a transformation or assign/copy to pull the data from the input message variable of the main wsdl into the input variable of your database wsdl.
Or your situation may not be that complicated...if you click the little (X) on the edge of the box on the BPEL screen you can go through a picking process.

How can i define a boolean variable with the condition if i got a specific text on a selected column?

How can i define a boolean variable with the condition if i got a specific text on a selected column?
Example:
my select results:
[id = 102] [Company = 'Microsoft']
If i got microsoft in 'Company' i want to my another table with the columnName "Microsoft" get "true".
Can you help me?

That is called 2-table UPDATE.
Example:
http://www.sqlusa.com/bestpractices2005/updatewithcorrelatedsubquery/
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How define a global variable in a class that all the methods will recognize

hi friends,
i need to define a global variable in a class that all the methods will recognize it.
any suggestions?
thanks,
dana.

Dera Dana,
In se24, create your own "Z" class.
Open the Attributes tab.
Insert your variable in the declaration part.
EQ:
Attribute     Level                       Visibility   Typing      Associated Type         Description
ITAB     Instance Attribute     Public     Type     Structure name     Description
In the Layout of View page,
<phtmlb:formLayoutDropDownListBox id                = "Dropdown"
                                          label             = "Drop Down"
                                          table             = "<%= controller->Itab %>"
                                          nameOfKeyColumn   = "CODE"
                                          nameOfValueColumn = "VALUE"
                                          selection         = "<%= controller->feild to be selected %>"
                                           />
Hope this will be helpful
Regards,
Gokul.N

How can I access global variables in a loaded Applescript?

How can I access global variables in a loaded script, in Xcode, ApplescriptObjC? Basically, I have a global variable defined in my parent script using "property", and I need to modify objects connected to those variables inside of a loaded script.
Example:
Parent script:
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
end script
Loaded script:
on myAwesomeHandler_()
myTextField's setStringValue_("The new Xcode is so glitchy ugh")
//changes value of linked text field of parent script
end myAwesomeHandler_
The problem is, the variable is undefined in the Loaded script, and I need it to have the same value as the parent script, and I don't want to pass the variable through the Handler. Any ideas?

I think want you are looking to do will need to be done in two steps. Because myTextField needs to be a property for the ObjectiveC part of the code you cannot turn it into a global.
However if you make a temporary variable global assign the string to it in the handler then set myTextField off of it.
global myTextFieldGlobal
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
myTextField's setStringValue_(myTextFieldGlobal)
end script
on myAwesomeHandler_()
set myTextFieldGlobal to "The new Xcode is so glitchy ugh"
//changes value of linked text field of parent script
end myAwesomeHandler_
I know you stated you did not want the handler to return a value but I have to ask why? Global's, imo, are not a good idea and really should be used as a last resort.
One other possibility is to pass a reference to the property to the handler. Not sure if that works in AS of if that would satisfy our requirement of not passing the variable through the handler
<edit>
Another though have you tried to define the property outside the script? That is
property myTextField : missing value
script AppDelegate
Not sure if that will work.
You might also want to have a look at Scope of Properties and Variables Declared in a Script Object

How to make use of variable present in sap standard FM to custom badi.

Hi All,
Scenario: I am using a transaction which makes use of SAP standard FM. Also I have used a zbadi to achieve my requirement. While debugging, I found that when the control goes to zbadi, i am unable to make use of the variables which are defined in standard FM.
Now my requirement is to make use of variables present in standard FM into zbadi. Can anyone suggest me how to achieve this?
Thanks in Advance......[:)]
Regards,
Vinit

if your system is NetWeaver 7.0 (ECC 6...), then you can use enhancement framework to add your code to the function module.
Otherwise, you can only access them if they have global scope, using ASSIGN ('(SAPLfunction group name)GLOBALVARNAME') TO <fieldsymbol> (be careful, you could change variable value, so make sure you don't)

How to define a changing variable in Broadcasting.

Similar Messages

Maybe you are looking for