How to define a logical system in BD21 (RBDMIDOC)

Hi,
We have several logical systems in our distribution model (BD64/WE20) liked to CREMAS message. One other them is the X server, for instance.
When run BD14, it´s ok, because we can set the target system (X server in this case).
However, when we work with change pointers, the BD21 doesn´t have a target system field and it´s based on distribution model. So, it sends IDOCs to
all logical system. But we want to send to only X server.
Does anybody know how to define a target system in this case?
Best regards,
André Avilla
Brazil

Hi
Check the below wiki.
https://wiki.sdn.sap.com/wiki/display/EP/SystemCreationin+portal
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoBWSystemthroughEnterprisePortal7.0UsinganIView.
Regards
Basheer
Edited by: Basheer on Jul 13, 2009 5:13 PM

Similar Messages

Defining a Logical System

I'm trying to follow the Best Practices note, "B84: BI Connectivity" for SAP BW 7.0 dated August, 2007.
On the second step, 1.2, "Defining a Logical System", I reach the second sub-step, clicking "Define Logical System". After the harmless warning, "Caution: The table is cross-client", then I get an error.
If I'm logged in as SAP* (client 000), I get the error, "No changes for user SAP* allowed".
If I'm logged in as ddic (client 000), I get the error, "User DDIC may not make changes in customer systems".
I'm still very new to SAP and don't understand these kinds of permissions issues at all. Two questions:
1) How can I resolve this issue?
2) Is there a good book that I can read to understand these kinds of administrative issues better?

Hi,
you to login as a development user or administration user into your BI client (100 e.g) but not as SAP oder ddic which are reserved users with special authorizations. Client 000 is a special client used for installation and creating the working or devleoping client where you set up /customize your BI later.
With htis development user you can then change the logical systems table, which is valid for all clients in te system!
Hope you got an idea
Juergen

Define one logical system for PI or multiple LS for 3rd-party system?

Hi gurus,
We are using IDOC2SOAP and SOAP2IDOC scenario in PI7.11. My question is regarding the logical system(or partner profile) on R3 side. We have two 3rd party system:A and B, so we have two choices.
1. define one single logical system for PI integration server;
2. define two logical systems for A and B.
For choice 1, it seems we can only use one business sytem or business component (business service in 7.0) as the two 3rd party system, especially for SOAP2IDOC scenario.
For choice 2, it seems we have no restrictions.
Is it correct?Any help will be appreciated.

technically you can use both options.
The question is - do you want all the IDOCs in your R3 system to appear as though they were sent from the PI?
What if a lot of 3rd party systems were sending the same IDOC (for example - ORDERS) and you want to investigate only those who were sent from system A?
I like it configured that every system will be identified by a name I give it.
I just use the IDOC communication channel checkbox of "Take Sender from Payload"
or use a different service in the IBC that has a different logical system configured in its Adapter specific identifiers.
Hope it helps,
Imanuel Rahamim.

How to define a BW system in Portal/VC 7.0

Hi Experts
Could you please update me step by step process on
How to define a BW system in Portal/VC so that i can use Services/FM in VC model.
Thanks in Advance

Hi
Check the below wiki.
https://wiki.sdn.sap.com/wiki/display/EP/SystemCreationin+portal
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoBWSystemthroughEnterprisePortal7.0UsinganIView.
Regards
Basheer
Edited by: Basheer on Jul 13, 2009 5:13 PM

In what situation, I should define a logical system?

In our sap system, we do not define any logical system for a certain client. I do not know is it necessary to define the logical system, what is it used for? In what sitution, I should have a logical system? Could you give me some advices?
thanks

Hi,
'logical system' is used to identify an individual client in a system, for ALE
communication between SAP systems.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
--Kishore

How to create a logical system DEVCLNT110 at RSA1?

This logical system is only for this system/client only.
In other words, it is NOT point to any other data source. I want to define DEVCLNT110 at DEV/110.
I know how to do it in SALE or BD54. Now I want to know how to do it at RSA1.
Thanks!

Hi,
In RSA1 you need to create a new Source System using the logical system name.
And then do source system mapping.
Regards,
Nirmal.K

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

How to delete a Logical system?

Hi all,
I was trying to execute the Demo examples provided as part of SAP XI. Before executing, I am trying to configure the settings, but I created some Logical Systems which didn't configured well.
So, I want to delete them in order the reconfigure every thing from begening. But I am uable to delete the Old Logical Sustems completely. I am still seeing them in my Integration Builder(Configuration).
Please let me know is there any way to delete them.
Thanks,
Nagarjuna.

Hi
How to delete them from Directory?
I see them under Scenarios(tab) and when i try to delete tem it says that "They will not be deleted and will be available in Objects(tab)".
Please help me in this.
Thanks,
Nagarjuna.

How to defined which logical database to use in a function module?

Hey,
I am trying to do logical database in a function module. I need to know where do i go to define which logical database to use? Becuase i get syntax error on my Get statement. The logical database i am trying to use is HR PNP .
Any useful help will be appreciated,
Thanks

I think we can't assign logical database to FM or FG. Because there isn't any option to put the logical database in the FM or FG's attributes.
You must have to create a executable report to have the LDB in use.
Regards,
Naimesh Patel

How to configure the logical system?

hi,
can you please provide the steps to configure the logical system?
Thanks & Regards,
NANDA

Hi,
Configurations in the SAP Source System
http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Connect BI system to R/3
Hope this helps.
Thanks,
JituK

How to define an export system for a production system?

Hello:
I remember there is a way to define an export system for a PRD.
However I cannot recall exactly what to do: in transport profile or instance profile?
Could any expert help find out this?
Thanks with points!
Regards!

Hi,
Are you trying to configure CHARM? In that case, try setting the domain controller as the production system and keep CTC=1.
This should help.
Thanks,
Rinkal

Selcting the Logical System in BD21

Hi,
We are using Change Pointers in the Source R/3 system so that whenever the Data changes, IDOC is trigerred to XI and then XI will send the IDOC to the Target System.
We want these modified IDOCs generated through the change pointers should go only to the XI System and not to all the other systems which are configured for this type of IDOC in the ALE Distirbution Model(SALE).
In bd21 I do not see any option to restrict this modfied IDOC to just the XI Target System.
Thanks
Rajeev Gupta

Hi,
> In bd21 I do not see any option to restrict this modfied IDOC to just the XI Target System.
You will not see,
>We want these modified IDOCs generated through the change pointers should go only to the XI System
Can you explain in detail,
Regards
Agasthuri Doss

How do you convert Logical System Names of BW systems in BO

Hi,
We have implemented SSO where user/role administration takes place in BW, and then imported into BO where authorization to folders and reports are maintained.
What we are NOT yet able to figure out is how to move our BO groups (i.e. those groups that were automatically created from BW roles) and have them automatically mapped to the roles in the next environment.
Below is the scenario:
BW Dev Environment
System XXD
Client   100
Role     ZHR
BO Dev Environment
BW role ZHR has been imported and group XXD100@ZHR is automatically created. Also, we have granted group XXD100@ZHR access to different folders, reports and universes in this environment.
BW Test Environment
System XXT
Client   200
Role     ZHR has been transported from Dev
BO Test Environment
We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained. Your help is highly appreciated.
Regards,
Olu

Hi,
We are not quite sure how to import XXD100@ZHR from our BO dev enviroment and have the group automatically changed to XXF200@ZHR with the access to the different folders, reports and universes retained
>>>you actually do NOT want to have those roles imported because the role from you first system doesn't exist in the second system.
You first system is pointing to system XXD with Client 100 and the second system is pointing to system XXF and client 200 - very different systems.
the roles have to be imported as part of the overall SAP authentication configuration. In case this is about having a possible identical folder and security structure I would suggest you use also groups in the BusinessObjects system - standard BusinessObjects groups - use those to assign security and then assign the SAP groups as subgroups. In that way you keep the security configuration and only assign the right subgroups.
ingo

Error : Logical System is not defined

Hi Experts,
I have installed SAP CRM 7.0 IDES . But when i am trying to exectute Transaction Code /nbp ( Business Partner Creation) system is giving an error 'Logical System is not defined ' and i am not able to execute the transaction.
Kindly explain how to define the logical system.
Regards,
Rohit Tripathi

Hello Rohit,
To solve the problem you should proceed as described in the long text of the error message B2 001 and maintain the logical system for the current client via transaction SCC4.
The reason for this error is that the ALE outbound of business partner is activated. If you don't want the ALE messages to be generated when business partner is changed then you can disable the ALE outbound. To do that, go the maintenance view CRMC_BUT_CALL_FU and disable the following function modules if active:
BUPA_OUTBOUND_REL
BUPA_OUTBOUND_ALE_REL
I hope this could be helpful.
Best regards,
Maggie

Maintenance Optimizer "local logical system is not defined"

hello, i would like to create a new maintenance transaction to upgrade from SAP ERP 6.0 to SAP ERP 6.0 Enhanced Package 4 i follow the steps in the "maintenance optimizer configuration guide" BUT when i click to create a new maintenance transaction i faced an error told me "local logical system is not defined"!!! so how i can define Local logical system?
thanks in advance
Amr M. Abdelazeez
Mobile: 002 011 40 85 200
Linked In: http://eg.linkedin.com/in/amrabdelazeez/
Alexandria, Egypt

This should be configuration issue, please check the description in the Implementation Guide (tr: SPRO) at following point:
SAP Solution Manager
- Basic Settings
   SAP Solution Manager System
    General Settings
     Maintain Logical Systems
After having maintained the logical systems, the error should not be displayed any longer.

How to define a logical system in BD21 (RBDMIDOC)

Similar Messages

Maybe you are looking for