How to Define Additional Incompatiblity Groups and Buckets

How do I define additional incompatiblity groups and buckets? I added them to the Advanced Pricing Lookups screen, but what is the next step?

The problem is that my new Incompatibility Level (4) is not working the same way as Levels 1-3. Anything I put in Level 4, acts like Level 1.
I did notice that the Lookup code I used is in a slightly different format as the seeded codes. Could this be the problem? The seeded codes are LVL 1, LVL 2, LVL 3. My new code is LVL4 (no space).

Similar Messages

  • Defining / Assigning Employee Groups and Sub Groups.

    I have defined a Personnel Area for e.g Barron Hotels - London  BH01 and Barron Hotels - Manchester - BH02.  I have also defined  there respective Personnel Subareas.
    What exact steps much I take to define the Employee Group and Employee Sub Groups and how do I link (Assign) them to corresponding  the Personnel Area  and Personnel subareas  defined above.
    Can some one please show me the exact steps. I have heard SM30  and V_503_ALL  mentioned but how  exactly are these used.
    Many thanks.

    Hi Tomuri,
    There is no link between EG-ESGs and Personnel Area -Subareas..  All these form an Enterprise Structure for an organisation and it can be seen against an employee in IT0001 - Org Assignment.
    Well, you have created PA as well as PSAs.  Now what you do is, similarly create EG- ESGs.. say for example..
    Emplyee Groups as A- Associate, B- Managers... etc...
    Employee Subgropus as A1, A2,..  B1, B2.. etc...
    Path: IMG-> Enterprise structure->Definition->Human Resources Management-> Employee Groups and
    -> Employee Subgroups
    When you create Personnel Areas.. you need to assign them to a Company Code...
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management-> Assign Personnel Area to Company Code
    Similarly, when you create Employee Subgroups, you assign it to Employee Groups (EGs)
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management
    -> Assign employee subgroup to employee group
    Next is the table you mentioned in your query... V_503_ALL... this clubs the groupings for -> ES grouping for collective agreement provision, Employee subgroup grouping for primary wage types, time quota types, work schedule etc,,, these are according to company requirements..
    For any further queires, do reply...
    I hope the information proveded helps you...
    Award points if the query was resolved...
    Good luck..
    Regards,
    Shweta

  • How to define a mail group email address?

    Hi,
    I have defined several groups and would like to use them as a mail group. By the default the address is [email protected]
    I have defined several virtual domains on my server that can accept mails for individual user. I would like to have the following address working [email protected]
    How can I set it up as the email cannot be set for groups in the workgroup manager (It is only working for users).
    I also tried with the directory utility but I can create an Emailaddress key for a group or an user but it is not taken into account by the mail server. (workgroup manager probably does more than just creating an entry on the open directory :-( )
    Thanks for you help !
    Frédéric

    group addresses have been broken for some time.
    I've used scripts to create aliases based on a group name and its members.
    Below is a script that I've used on 10.7 with users in LDAP.
    Any group which has a comment of 'mail' will be turned into an alias with the proper recipients.
    You'll need to run it on a schedule (unless you want to run it manually) and you'll need to modify it for 10.8 and your specific environment.
    I'll try to put together a 10.8 version sometime soon...
    cd /etc/postfix
    # clear current aliases
    echo "" > group_aliases.tmp
    # Get list of groups with 'mail' in the comment field
    gr=`dscl /LDAPv3/127.0.0.1 -list /Groups Comment | grep mail | awk '{print $1}'`
    for group in $gr
       do
          echo $group: `dscl /LDAPv3/127.0.0.1 -read /Groups/$group dsAttrTypeNative:memberUid | cut -d : -f 3 | grep -v "No such key"` >> group_aliases.tmp
       done
    cmp -s group_aliases.tmp group_aliases > /dev/null
       if [ $? -eq 1 ]; then
          echo different
          cp group_aliases.tmp group_aliases
          /usr/sbin/postalias /etc/postfix/group_aliases
          /usr/bin/newaliases
       else
          echo same
       fi
    exit

  • PPOMA_BBP - How to defin periods of assignement and object

    Dear all,
    We have an additional company code and for that reason we created a new organizational unit "plant" (Plant B) in PPOMA.
    One of our existing organizational structures (org units with positions and central persons) will be switched on 01.01.2012 to this new plant (from A to B). On the same time, some of the attributes of theses org units and position has to be changed.
    How is it possible to limit the assignment to plant A until 31.12.2011 and to create a new assignment beginning on 01.01.2012 to plant B? And how is it possible to have new attributes beginning on 01.01.2012 on this org structure (assigned to plant B)?
    Have we to copy the whole organizational structure and to limit the validities?
    Thanks and best regards,
    Thomas

    Hi Jaques,
    Thank you!
    I want to distribute the three dates on three different columns, date 1, date 2, date 3. Is that possible with inList?
    If I use OR, do I get all the dates and can distribute them in different columns?
    (In this report we follow salary development of employees. The report shows the given salary at three different points of time for an employee).
    Regards Silje

  • How to define additional virtual image directories for multi lingual app.

    Hi,
    In my ApEx application, for English language I want to use default image directory /i/, but for other languages I want to use seperate image directories like /i/fr/ for French etc. In - Translate Application -> Application Language Mapping , there is a text area to capture the Image Directory.
    How can I define additional image directory (apart from /i/) in my multilingual application? What are the steps for defining these virtual image directories in a multi lingual setup?
    I am using ApEx v 3.1.2 on 11g with embeded PL/SQL gateway.
    Any suggestions or pointers in the right direction are highly appreciated.
    Thanks & Regards,
    AV
    Edited by: user11176657 on Jun 30, 2009 6:04 AM

    Hi user11176657,
    Can you use an application item in your replacement for the path?
    Then you can set it at login.
    Regards
    Michael

  • How to define Length of char. and KF

    During infoobject creation, how to define the length of char. and KF, is it related to master data text length ? Should we take other things into account? When we see one field in table, the length of the field was defined with 2, but its master data text length was more than 2, what's the reason for this things?
    Edited by: hi ni on Apr 18, 2008 12:12 PM

    hi,
    how to define the length of char. and KF, is it related to master data text length ?
    ther business will have defined  length and type for any characteristics. ex - Materail number may have lenth of max 15 and is Char type.
    but for text max size is by default 40 chars.
    Should we take other things into account?
    get spec from client, that could be better and also consider the field used to map ur char/KF from source system.
    Ramesh

  • How to create new storage group and mailbox database on exchange 2007 CCR

    Hi, Our Environment:
    Exchange 2007 SP3 CCR.
    Now I want to create a new storage group with edb file and log files on the new drive.
    My plan is as below:
    Once we have new drive ready on both active node and passive node,
    1): Create new storage group with log files for this new storage group on other new drive from Active Node.
    2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
    My question is:
    1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
    2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
    Thanks in advance.

    Hi,
    Here are my answers you can refer to:
    1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
    We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
    Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
    http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
    2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
    http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to get list of groups and the users from OID

    Hi,
    Can someone please tell me how to get the list of GROUPS and all the USERS in each group in OID using Java. Need to recursively get all the Groups and Users in each group using Java any samples.
    Thanks

    use examples from OTN like
    http://www.oracle.com/technology/sample_code/products/jdev/readmes/samples/ldapdatacontrol/ldapapplication/src/dc/ldap/model/LDAPSearch.java
    and modify it to your needs
    Bernhard

  • How to define Legislative Data group in HCM Extract?

    HI All,
    Can you please share the steps to define Legislative data group in HCM Extract ? During creation of HCM extract, I didn't find any option to define the Legislative data group , so my HCM Extract is created without having the Legislative data group and for that reason, I am not able to use extract rule Fast Formula (under a Legislative data group) in HCM Extract.
    Any suggestion would be helpful to me.
    Thanks & Regards,
    Sharmistha

    Hi Sharmistha,
    Once the extract is created there is no ability to add the LDG. A workaround i to export the extract and import it back inot9 the application - the import screen has LDG field.
    Regards,
    Elena

  • How do I know which group and group counter used to create current estimate

    Is there a way to know, if for a given set of materials, what groups and groups counters have been used to create the current cost estimate. Or for a given comboniation of material, group and group counter has been used to create a current cost estimate. I can look each up through displaying the cost estimate but I am looking for a quick way since the number of materials are in 100s.
    I was wondering if there is a table I could look up to get the info.
    Any help would be much appreciated.
    Regards

    The name of the table that needs to be used is KEKO. I figured it out so I thought I would share
    Edited by: NIK83 on Mar 7, 2011 10:16 PM

  • Help! How do I exit tab groups and get my session/tabs back. The icon doesn't toggle and instructions don't say how to get back -- first try and I'm stuck.

    This is the first time I tried to use tabgroups. I clicked on the bricks-style icon and then couldn't see any way to get back to my current firefox session and open tabs. It doesn't seem to be a toggle, no "go back" or anything else I can see. Help!

    In the Tab Groups window, I have a Close (X) button in the right upper corner (along with the Minimize and Maximize buttons). Clicking the Close (X) button will return you to your normal browsing session. In addition, SHIFT+CTRL+E will return you to to your normal browsing (SHIFT+CTRL+E also will open the Tab Groups window).
    *Article about Tab Groups --> http://www.makeuseof.com/tag/organize-manage-firefox-open-tabs-tab-groups/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How to create a Product Grouping and manage multiples?

    How I can create a Product Grouping with 3 pieces of a product + 2 pieces of another product and ensure that customer can only order in multiples (6+4, 9+6, 12+8, etc.) and not for example 4+3?
    Regards,
    Francesco

    Hi Madhavi,
    You also need to assign the hierarchy to the application Product in Tcode: COMM_PRAPPLCAT.
    There we have two settings,
    1. Assign hierarchy to application.
       Make a new entry. Choose application Product and assign the hierarchy you
       have created.
    2. Assign hierarchy to product type.
       In case you wish to have a separate hierarchy for each product type ( Material,
       Service, Warranty etc) than use this setting.
       Make new entry. Choose a product type and assign hierarchy to it.
    Wish the information is useful. If it helps, do reward with points.
    Regards,
    Shalini Chauhan

  • How to get profit center group and its description

    According to three tables(as below), i get profit center group, how to get its description&#65311;
    CEPC  (Profit Center Master Data Table)
    SETLEAF
    SETNODE
    PS:(Referrence to teh link fields in table)
    For Profit centre Group ( SETLEAF-SETNAME )
    Select BSEG-BUKRS / BSEG-PRCTR from BSEG.
    SELECT SINGLE SETNAME INTO WA_SETNAME
    FROM SETLEAF
    WHERE SETCALSS = '0106'
    AND SUBCLASS = BSEG-BUKRS
    AND VALFROM = BSEG-PRCTR
    i can get two records, why?

    Hi,
    I am not sure of the significance of this table...
    But looking at the table structure it is having LINEID as one of the key fields..
    So you can have more than one record for the same combination..
    Thanks,
    Naren

  • How to define current flow element and more

    Hi all. I've just started with text layout and I have a lot of questions, will be thankfull if smbdy can help me.
    1. How can I get the flow element according to mouse position over it, for exmple highlight the paragraph element on mouse over.
    2. How to implement drag&drop behavior to text flow elements, for example for images.
    3. How can I get the element in which the blinky "add text here icon" is located?
    Thanks.

    1. How can I get the flow element according to mouse position over it, for exmple highlight the paragraph element on mouse over.
    Probably the most efficient way is to listen for the updateComplete from the TextFlow, and when it comes walk the flowComposer's TextFlowLines for each paragraph to get the paragraph bounds. Once you have a list of bounds, doing the roll over on mouse move should be very quick.
    2. How to implement drag&drop behavior to text flow elements, for example for images.
    Good question. The container that holds the text will be getting events for mouse down, mouse move, etc. and handles them by passing them along to the interactionManager (class name SelectionManager). The interactionManager handles them by making a text selection. If you want to handle the mouseUp by inserting the image at the selection, that should be pretty simple. There's a method for that in IEditManager (the interactionManager is also an IEditManager), so you can just call interactionManager.insertInlineGraphic.
    3. How can I get the element in which the blinky "add text here icon" is located?
    Easiest way is to call
         ElementRange.createElementRange(textFlow, textFlow.interactionManager.absoluteStart, textFlow.interactionManager.absoluteEnd);
    That creates an element range which will have the leaf and paragraph elements in the selection.
    Hope this helps,
    - robin

  • How to define the "target group" in STMS?

    Experts:
    We have a ECC  landscapes with many clients on DEV and QAS.
    The previous basis admin created 2 target groups at STMS.
    The first TARGET  GROUP  has  both DEV and QAS clients as the target systems in its definition.
    The second TARGET GROUP  has only the QAS clients as the target systems--so many QAS clients show up in both Target  GROUPS.
    Could you help explain why we need the second TARGET GROUP  since all target systems in the second TARGET  GROUP already  show up in the first TARGET GROUP.
    Thanks a lot!

    The second TARGET GROUP that has only the QAS clients can be used where a transport only needs to be send to QA systems/clients and not to Dev clients.
    An example would be client independent objects, you don't need to move them to rest of the Dev clients but need to be moved to QA.
    Hope this helps
    Thanks,
    Naveed

Maybe you are looking for