How to define default Work Center in WebUI?

Hello,
We want to change the default Work Center in Web UI (the first one that will be opened when the system is started).
How is it possible to perform it?
Thanks in advance,
Sergey

Hello Sergey.
If it's still relevant for you. You can change default work center in navigation bar profile of your business role (tx. CRMC_UI_NBLINKS). On the first screen (where all navigation bar profiles are displayed) there is a third column "Link ID". Here you put link id of the default Work Center.
Hope this will help.

Similar Messages

Change the default work center in CRM 2007 webclient

Hi all,
With IC_AGENT role,the default work center is 'Account identification'.When I click the buttone'end' ,it jump to account identification work center ,how to change this default,config or coding ?
Thanks a lot!
Best regards,
LeKa

Hi Ashwin,
In our ZIC_AGENT, I have defined the navigation bar that contained the 'IC_BPIDENT:account identification' work center. This is as default pages whatever ending phone call on webclient or cancell any action, it also jump to 'IC_BPIDENT' view.
I want to enhance the function, when i end a call from webclient ,it could jump to 'call list' work center instead of 'account identificaton'.
did you have any ideas ,please tell me.
Thanks.
Best regards,
LeKa

How can define the cost center (department) manager?

We are on 11.5.0.10
Financials implementation is done(GL,AP,AR,FA,IA)
In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
How can define the cost center (department) manager? Thanks.

I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
Hope this clarifies.
Vinit

How to create New Work Center

Dear Experts
How to create New Work Center?, what are all the inforamtions need while creating workcenter.
Regards
Rajakarthik

Hi,
In addition to the above post, you need to identify that:
1. Whether you need separate activity types and cost center for the newly created work center. These details are entered in the Costing View of the Work Center.
If these are required then use KL01 to create new activity, KP26 to define the activity price.
If required create cost element using T Code KA01 and Cost Center using KS01.
Take help from the CO guy on this.
2. Also you need to ask the concerned about the operating times for the wor center. That is Start time and End time of WC. It is used for capacity evaluation and scheduling of the orders. It is maintained in the capacity view (Bottom left Button in the view).
this view will also contain the details regarding the calendar, to be assigned to the work center, if needed. Collect details for this requirement. Also you can assign a different calendar to WC apart from factory calendar.
3. Find out whether this WC will be operating in shifts or not. Accordingly maintain the details.
Hope it is useful for you.
Revert for clarifications
Regards,
Rohit.

How to define default element in SAP-Script?

Hi Guys,
How to define default element in SAP-Script?
Can you tell me to do this...is it possible in all the windows or only in main window?
Regards,
GURU

Hi,
Welcome to SDN
You can't post ur questions in other's threads .Open a new thread.
click on post new thread and open new thread.
Regards

Estimated Start time in notification based on Time defined in Work center

Hi,
Following Satish post- I am trying to find solution to the same problem so i will appreciate any advise.
When the notification is created ,the estimated start time should be based on priority .This in iteslf is pretty straight & simple. However if the reported time is after work hours or towards the end of work hours or weekends , the estimated start time should be reflected accordingly based on factory calender & work center time schedule.
In other words the estimated start time should fall within the window of work hours available.
Example:
Presume the the working hours for the Organization are 8:00AM to 5:00 PM & a call comes for service at 4:00 PM. Also say , for high priority the defined response time is 5 hours. In such a instance the estimated start date should be set to next day at 11:00 AM.
Appreciate your help for the configuration that need to be done
Shirly

Hi,
I think ur talking about notification malfunction start time .. currently it just takes the system date and time by default .. and if you need work center timings i believe first u need the eqpt /F.loc to get the work center data in notificaiton ...
I think u can get these dates can be modified while saving by using user exit : QQMA0014 QM/PM/SM: Checks before saving a notification or BADI IF_EX_NOTIF_EVENT_SAVE , but at the same time the eqpt or F.loc have work center details in master record ...or work center needs to be entered manually in notification ..., pls check up ..
regrds
pushpa

Changing default Work Center during CATS time entry

Hi Folks,
I am hoping someone here can throw some expert advice.
Currently during time entry in CATS, we have Work Center coming in from the Work Order. Its getting defaulted without any option to change it. Business here has a need to change it. I have llooked into the CATS profile to see if there is a place that enable the WC to be defaulted.
In Transaction CAC1, there is a section that shows what fields are being defaulted during CAT2 time entry. However I do not see the Work Center as one of the option there.
Can any one help?
In short, where do we disable the defaulting of the WC from the Word Order during time entry?
Thanks in advance.

Hi,
Adding to what Kapil said; if the work centre is a grayed out in time shet screen then you can go to CAC2 transaction and make it editable. By this way users will be able to change the work centre on screen.
Regards
Sreekanth

How to assign default cost center to exchange differences ?

Hi all,
Default costcentre for currency exchange differences missing in the company code.
How to assign ?
Please answer at the earliest.
regards
narasimha rao

Hi,
Have you able to assign default Cost Center in case of Exchange differences? If yes, how is that possible.
We also want to do the same activity in case of Foreign Exchange Revaluation.
Please share, points will be assigned.
Regards,
Shridhar

How to assign default cost center and G/L account in Purchase requisition

Hi,
While creating the purchase requisition ME51N in account assignment we have to enetr cost center name and G/L account but every time we have to enter this how to assign this as defaut value , like cost center : MSMISC and account 42XXXXX.
REGARDS,
ZAFAR

hi
if the field is required then u have to enter them manually
so if this are not required then goto OKB9 here give the default cost center for the Gl acct

How to mix default profit center and mandatory profit center ?

Dear all,
I have defined that the profit center is mandatory for all accounts (with the field status group).
For some accounts, I have defined a default profit center in spro.
When I do a posting for those accounts, and I don't key in a value for profit center, I receive the error message "An entry is required in Profit center field for account xxxx". But, the account has a default profit center defined in spro.
Why the default profit center is not taken in consideration before to display the error message ?
Is there any solution ?
Thanks for your help

When the field status group for an account mandates a field, it has to be filled in ENTRY view, i.e. when you are entering the document. System would not let you go further until the field is filled with a valid value. Default profit center configuration gets triggerred subsequently (just before the posting).
Solution: For account for which you have default profit center configuration, change the field status group so profit center is optional.

How to create a work center for Workflow

Dear all,
I need some material or help to create work center in workflow
for agent assignment.
or
How to assign Multiple responsible agents for a specific task
Regards,
Gaurav Sood

Hi Imthiaz,
Good Morning,
I will Like describe you the secnario that i am in.
I have customised workflows for
1. Please release PO
2. PO release effected.
Both creator and relesing authority get notification for the same
in SAP Inbox.
In Addition to that i want to assign few other people who should get notification of mail PO Released.
can you explain a bit more about Expression table
regards,
Gaurav

How to know persons work center assignment

Hi All,
I need to know to which workcenter, the person is assigned.
(means, I have a Personal NUmber and want to find out his workcenter)
There is one transaction which i used earlier also but now i am not remembering that.
Please let me know how I can know the persons workcenter asignment
Regards,
mamta

Hi mamta,
1. Go to PP01, Select the Object Person, and Check the Infotype 1001 Relationship, Select Overview and check the
the entries, whether the Person is related to any Work Center.
2. Or note down the person, Position Number in IT0001, Go to PP01, Select the Object Position, Give the Position Number, and Check the Infotype 1001 Relationship, Select Overview and check the the entries, whether the Position is related to any Work Center.
You can check either way, if you have assigned the Person - Work center relationship you can use the first one
If you have assigned the Position - Work center relation ship you can use the second one.
Regards
Venu

How to set default working directory in iSQL*PLUS

In regular SQL*Plus, one could set the properties attribute of the shortcut icon to a default working directory. Is there a way to set a default for iSQL so that you don't have to reset this each time you log on?

The default path for the "Browse..." (Netscape) or
"Choose" (Opera 6) button for loading scripts????
This would be browser specific - even the button text
is chosen by the browser. I've never tried to rig the
initial path. Maybe it can be done with a shortcut
to the browser executable?
-- CJ

How to define default subtypes for Infotype 0105 on entry

Hello;
I have spend an entire day trying to look into PA configuration to determin how to make specific Subtype of the 0105 Communication Infotype automatically appear when an HR person is entering in a new employee.
Currently we have the 0001, 0010, and ADP subtypes automatically appear in the Communication Infotype screen when the person is entering in a new employee. I was asked to create three new Subtypes for Infortype 0105 and have these new subtypes automatically appear on the data entry screen for Infotype 0105.
I can not find anywhere in configuration how to do this. I ahve burnt an entire day searching configuration and have about had it with this garbage.
Can someone please point me to specific spot in configuration where these subtypes of and Infotype can be identified as default data entry screens.
I would greatly appreciate any help ... since I am not a HR Configurator ... just a plain old ABAP'er who has lost our configurators.
Scott.

Hi Scott,
To create subtypes follow:
Tcode: SPRO
Path: Personnel Management>Personnel Administration>Communication>Create Communication Types
Half the job is done. Then include those subtypes in your hiring action. To do so:
Tcode: SPRO
Path: Personnel Management>Personnel Administration>Customizing Procedures>Actions>Define infogroups>Info group
Select your hiring infogroup and create new entries with operation INS for 105 and the three subtypes.
You are all set!
Cheers,
Donnie

How to make default profit center no in MM Master

Hi Experts,
I want to make profit center in mmaterial master costing one tab. how can i fix this.
For example
I have profit center 9999, i want fix default for all material master in Costing1 tab profitcenter field.
Guid on this

Hi Anil,
Just use tcode MM02. Enter the material number you want to enter profit center. When you enter after inserting material number it list you difference veiw/tabs, select COSTING1 tab and enter, system will ask to you to enter the plant. Give plant where this material has been created.
If you want to maintain mass change then goto MM17.

How to define default Work Center in WebUI?

Similar Messages

Maybe you are looking for