How to define distances between layers?
Hello,
How can I define the distance between each layer, por example, 10mils between top layer and second, 15mils between this second and the third and so on?
Thank you,
Rodolfo
Hi Rodolfo,
Ultiboard doesn't have a setting for distance between the layers, if you need the layers to be a certain way, you should put it in a note on the mechanical layer and send this information to your PCB manufacturer.
Tien P.
National Instruments
Similar Messages
-
How to define dependancy between sowtware comps in the SLD
how to define dependancy between sowtware comps in the SLD,
i have a software comp, in the IR, where i import all RFCs and IDOCs, so that they can be used across all software comps in the IR,
since, IDOCs imported in one software comp, cant be used in another s/w comp,
i need to create that dependancy..............................
how can i mention the dependancy in the SLD....Hi,
Please read the Rules OF Engagement,
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement&
<i>
Do not use words in capital letters and any of the words: urgent, quickly, burning, etc in your message. Especially not in the title! This just irritates and does not help you get to your goal. From our side, we definitely do not answer faster when we see these words.
The same goes for such things as ??? or !!! in appends. In the English language one ? or ! is sufficient to terminate a sentence. </i>
Answering you question, Say you have 2 SWCV's. SWCV A and B. All objects imported in SWCV A should be visible in B. In this case, go to SWCV B and in this, Go to the Dependency Tab , and Select SWCV A here as the dependent Component.
In your IR, Clear SLD Cache and Reimport the 2 SWCV's into the IR and now you will see the Basis Objects in SWCV B. All the existing objects will not be affected as a result of this reimport into IR.
Regards
Bhavesh -
How to measure distance between two points uisng uiaccelerometer
Hello all,
I am trying to measure distance between two points.So for that i am used uiaccelerometer but its give only rotation changes. I am moving my whole device from one point to another point so for that all x,y & z changes remain same. So how can get the device movement for that?
Thank you..UIAccelerometer does not give rotation changes, it senses acceleration in each of the 3 axis in g-force units. Moving in a plane from one point to another and stopping will result in a net g-force in that axis of zero. To get distance one has to measure the initial acceleration and then the time before a deceleration is detected. It gets really complicated in real life since the start and stop are not instantaneous.
-
Flex chart how to put distance between x-axis data
hello
i am using flex chart line series and column series. i want
to display 100 data points, with different dates along the x-axis,
but i don't want all 100 points to be displayed at the same time as
the x-axis dates will not be readable. i want to have a fixed space
between each x-axis point and the user then scrolls along the
chart.
i read the API but do not see any way to add the x-axis
spacing?
thank you for any assistance.
TonyI don't know what you mean then.
If you set the min and max to be a certain number of days
apart then you know the dates within those days will be displayed.
That combined with the width of the chart will define how much
space there is between x-axis points. -
How to define mouse travel distance before it becomes a drag?
Could anyone tell me how to define a mouse travel distance before it becomes a drag? I saw it somewhere, but couldn't find it anymore. Thanks.
Hi 74philip, mouseDragger was not triggered when start a drag. I have a table, which implements mouseMotionListener. It seems some had the same problem. See link http://forum.java.sun.com/thread.jspa?forumID=57&threadID=454925
If you are stil watching this topic, could you advise?
My problem is when dragging point starts near the borderline between two cells(one source, one target) in a table, because mouse travel a long distance before it is recognized as a drag, so when mouse travels into the target, drag is recognized and dragNdrop takes target as source. That is why I am trying to find a way to define the minimum mouse travel distance before a drag is recognized. Thanks. -
How to define join in physical layer between cube and relational table
Hi
I have a aggregated data in essbase cube. I want to supplement the information in the cube with data from relational source.
I read article http://community.altiusconsulting.com/blogs/altiustechblog/archive/2008/10/24/are-essbase-and-oracle-bi-enterprise-edition-obiee-a-match-made-in-heaven.aspx which describes how to do it.
From this article I gather that I have to define a complex join between the cube imported from essbase to my relational table in physical layer.
But when I use Join Manager I am only able to define jooin between tables from relation source but not with the imported cube.
In My case I am trying to join risk dimension in the cube based on risk_type_code (Gen3 member) with risk_type_code in relation table dt_risk_type.
How can I create this join?
Regards
DhwajHi
This has worked the BI server has joined the member from the oracle database to cube. So Now for risk type id defined in the cube I can view the risk type code and risk type name from the relational db.
But now if I want to find aggregated risk amount against a risk type id it brings back nothing. If I remove the join in the logical model then I get correct values. Is there a way by which I can combine phsical cube with relational model and still get the aggregated values in the cube?
I have changed the column risk amount to be sum in place of aggr_external both in logical and phsical model.
Regards,
Dhwaj -
How do I define gap between tracks in playlists?
how do I define gap between tracks in a playlist in iTunes? (So that the gaps will be a part of the playlist after syncronizing to an iPhone.)
This is for tracks imported from LogicPro, not ripped from a CD.
Thanks for answerSince iTunes has no such feature, the way to do it is to create short tracks of silence. Add them to your iTunes library, and insert them as separators between other tracks in the playlist. You can use the same track multiple times in the same regular playlist.
I have not used Logic Pro, but I am fairly sure it can be used to create a short track of silence. -
How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators. -
How to define the dynamic navigation between two component in web ui
Hi All,
I have a requirement to create a new assignment block in accounts overview screen .
1.Created new view(Table view) in the BP_HEAD component.
2.Created new button on the table view toolbar .
3.If the user clicks the new button it should navigate to interaction log component(BT126H_CALL).
Please hekp me step 3 how to do .
I have checked planned activity assignment block in the account but is dynamic navigation.
Please explain me how to define the dynamic navigation between two components.
What is window delegate .
Thanks,
VenkyyHi ,
Kindly follow the link , this will be helpful for your issue :
http://wiki.sdn.sap.com/wiki/display/CRM/CRM-NavigatingtoyourcustomBSP+component -
How to draw a line(shortest distance) between two ellipse using SWING
how to draw a line(should be shortest distance) between two ellipse using SWING
any help will be appreciated
regardsimport java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.MouseInputAdapter;
public class ELine extends JPanel {
Ellipse2D.Double red = new Ellipse2D.Double(150,110,75,165);
Ellipse2D.Double blue = new Ellipse2D.Double(150,50,100,50);
Line2D.Double line = new Line2D.Double();
protected void paintComponent(Graphics g) {
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.setPaint(Color.green.darker());
g2.draw(line);
g2.setPaint(Color.blue);
g2.draw(blue);
g2.setPaint(Color.red);
g2.draw(red);
private void connect() {
double flatness = 0.01;
PathIterator pit = blue.getPathIterator(null, flatness);
double[] coords = new double[2];
double x1 = 0, y1 = 0, x2 = 0, y2 = 0;
double min = Double.MAX_VALUE;
while(!pit.isDone()) {
int type = pit.currentSegment(coords);
switch(type) {
case PathIterator.SEG_MOVETO:
case PathIterator.SEG_LINETO:
Point2D.Double p = getClosestPoint(coords[0], coords[1]);
double dist = p.distance(coords[0], coords[1]);
if(dist < min) {
min = dist;
x1 = coords[0];
y1 = coords[1];
x2 = p.x;
y2 = p.y;
break;
case PathIterator.SEG_CLOSE:
break;
default:
System.out.println("blue type: " + type);
pit.next();
line.setLine(x1, y1, x2, y2);
private Point2D.Double getClosestPoint(double x, double y) {
double flatness = 0.01;
PathIterator pit = red.getPathIterator(null, flatness);
double[] coords = new double[2];
Point2D.Double p = new Point2D.Double();
double min = Double.MAX_VALUE;
while(!pit.isDone()) {
int type = pit.currentSegment(coords);
switch(type) {
case PathIterator.SEG_MOVETO:
case PathIterator.SEG_LINETO:
double dist = Point2D.distance(x, y, coords[0], coords[1]);
if(dist < min) {
min = dist;
p.setLocation(coords[0], coords[1]);
break;
case PathIterator.SEG_CLOSE:
break;
default:
System.out.println("red type: " + type);
pit.next();
return p;
public static void main(String[] args) {
final ELine test = new ELine();
test.addMouseListener(test.mia);
test.addMouseMotionListener(test.mia);
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.add(test);
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
EventQueue.invokeLater(new Runnable() {
public void run() {
Graphics g = test.getGraphics();
g.drawString("drag me", 175, 80);
g.dispose();
private MouseInputAdapter mia = new MouseInputAdapter() {
Point2D.Double offset = new Point2D.Double();
boolean dragging = false;
public void mousePressed(MouseEvent e) {
Point p = e.getPoint();
if(blue.contains(p)) {
offset.x = p.x - blue.x;
offset.y = p.y - blue.y;
dragging = true;
public void mouseReleased(MouseEvent e) {
dragging = false;
public void mouseDragged(MouseEvent e) {
if(dragging) {
double x = e.getX() - offset.x;
double y = e.getY() - offset.y;
blue.setFrame(x, y, blue.width, blue.height);
connect();
repaint();
} -
How much Maximum Distance I would keep between Oracle EM OMS and Agent ?
Hello There,
Here I am asking little curious question which come in my mind ?
Actually We have many client geographically located in different cities.And we are remotely managing their databases on VPN.
I just wanted to Install One Enterprise Manager Grid control for all these databases.
Here I assume we have 10Mbps Line between our head quater and Clients.
And regular agent upload max 1.5GB per month for each client.
Is it possible ?
If possible how much max distance(miles) do you recommended.
Thanks
Hemesh.
Edited by: Hemss on Jan 28, 2011 5:14 PMHi Hemesh,
are you sure that 2 GB of data are uploaded with every heartbeat? The best idea to figure out would be - from my point of view - just to test
it. Otherwise you will not get any feeling for the upload amount and upload time... -
How can i compute the distance between every two strias
how can i compute the distance between every two strias?The distances between every two strias in an image are almost equal .I have a picture for you in the accessory.there are many trias in all kinds of orientation in an image.fistly,i should find the most consious area,because it is simple to compute . Secondly,To improve precision,i should compute the distance of a group of trias,then conpute its average value.i dont know how to compute .pls teach me,thanks very much!
Attachments:
11.jpg 12 KBthere is a typical image.
Attachments:
21.jpg 23 KB -
How to get the distance between two object!!!
I have two GEOM object and want to know the distance between them, may u give me some solution to find the distance between them.
Hi!,
SDO_GEOM.SDO_DISTANCE
see: http://www.oracle.com/technology/documentation/spatial.html
regards, Andreas -
Excel formula to calculate the distance between multiple points using lat/lon coordinates
I'm currently drawing up a mock database schema with two tables: Booking and Waypoint.
Booking stores the taxi booking information.
Waypoint stores the pickup and drop off points during the journey, along with the lat lon position. Each sequence is a stop in the journey.
How would I calculate the distance between the different stops in each journey (using the lat/lon data) in Excel?
Is there a way to programmatically define this in Excel, i.e. so that a formula can be placed into the mileagecolumn
(Booking table),
lookup the matching sequence (via bookingId)
for that journey in the Waypointtable
and return a result?
Example 1:
A journey with 2 stops:
1 1 1 MK4 4FL, 2, Levens Hall Drive, Westcroft, Milton Keynes 52.002529 -0.797623
2 1 2 MK2 2RD, 55, Westfield Road, Bletchley, Milton Keynes 51.992571 -0.72753
4.1 miles according to Google, entry made in mileage column
in Booking table
where id
= 1
Example 2:
A journey with 3 stops:
6 3 1 MK7 7DT, 2, Spearmint Close, Walnut Tree, Milton Keynes 52.017486 -0.690113
7 3 2 MK18 1JL, H S B C, Market Hill, Buckingham 52.000674 -0.987062
8 3 1 MK17 0FE, 1, Maids Close, Mursley, Milton Keynes 52.040622 -0.759417
27.7 miles according to Google, entry made in mileage column
in Booking table
where id
= 3
I understand that 100% accuracy is not possible, so it will not be an issue.http://www.cpearson.com/excel/LatLong.aspx
and
http://www.contextures.com/excellatitudelongitude.html -
How do I interact between stage and classes?
Hi,
I have asked this question before, and all I got is "Go back
to reading beginner books", so I'm hoping that someone here is
willing to actually answer my question as opposed to brushing me
off because they were unwilling to help...
And yes, I have read books on the topic and gone through tons
of the documentation and not found the answer to this. I have
ActionScript 1 and JavaScript experience, so this whole business
shouldn't be this hard.
I am using ActionScript 3 in Flash CS3.
My problem is this:
I need to find out how to send commands between stuff on the
stage and stuff that's defined in a class.
I have had this issue for ages and kept trying to find ways
around it since so far I haven't been able to find help for it.
For example:
When using a document class, how can I access the current
frame number of the Stage?
Or using a document class, how can I access any object (like
a MovieClip with instance name) that was put on the stage using the
IDE?
Currently, to be more specific, I am trying to do something
really simple:
Make a button work on my stage that is not always visible.
With AS3 that's not as easy anymore as it used to be.
So what I did now is create the button in the document class,
used addChild and set it to alpha = 0.
Now, when the Stage reaches specific frames (i.e. ones with
labels, and I got this part figured out), it is supposed to make
the button visible. Then I can add event listeners and stuff, and I
can figure that part out myself.
I don't know how to access the stage frame number from the
document class, so I put it into a frame script in frame 1, but now
this script cannot access the button that is defined in the
document class.
It's driving me bananas...
PLEASE, someone here, can someone please explain to me how I
can make this work?
I have seen plenty of diagrams of the Display List and the
Object Hierarchy, but none of that explains how to actually USE any
of it...
Thanks so much in advance to anyone who is willing to spend
some time to answer!Well, first of all, I have to say that AS3 has basically been
designed to be difficult on purpose, in that all this interaction
between objects is purposefully very strict. For this reason, I
still use AS2 for all my basic Flash work. AS3 is just a lot more
involved, a lot more strict, a lot less forgiving... you need a lot
of experience with it before it starts to make sense.
Now, I think I might have a few specific answers to your
questions:
From any DisplayObject (this includes any Document class,
which has to extend MovieClip or in some cases Sprite) you can
access the Stage using the 'stage' property.
However, stage is probably not exactly what you want, you
want the main timeline, which is the child of stage. To access the
main timeline, you can use the 'root' property of any
DisplayObject.
However, unless you have strict mode off, Flash won't let you
just say "root.myMovieClip" because the root property is of the
type DisplayObject, which is not a dynamic class (meaning you can't
add properties to it) and it has no built in property "myMovieClip"
so it thinks you made a mistake. So you have to "cast" the root
property as a MovieClip, which *is* dynamic so it will let you try
to reference anything on it (like AS1/2 did for everything.)
So what all that means is this should work from inside you
document class:
(root as MovieClip).myMovieClip
or
MovieClip(root).myMovieClip
Either will successfully reference a MovieClip you had put on
the main stage in the IDE and named "myMovieClip".
Rather than setting the alpha to 0, try setting visible to
false. I think this will disable all interactive events, where
simply setting alpha to 0 would make it still be interactive.
HTH
Maybe you are looking for
-
Windows 7 only, best settings?
hi, i have a few questions, i want to install windows 7 without osx or bootcamp. 1) should i use gpt or mbr to format the whole hdd? (with leopard disc) and why? 2) when osx is installed and i try to boot win7 from install dvd i have a problem: i stu
-
Has the issue with font licences and embedding fonts in a dynamic PDF been solved?
Hi all, Can I check if this issue has been fixed in LiveCycle yet please? http://forums.adobe.com/message/3724557 Issue is that although LC lets you specify what typeface should be used for the caption/value in a form, it cannot discern the correspon
-
IR not balance was posted but not blocked for payment
Dear all, Kindly help. I have PO , with GR amount of 1000, then tried to post IR amount higher than the 5% tolerance limit PO/GR amount = 1,000 IR amount = 1,500.00 in this case when i simulate and check, i get the message Balance Not Zero , so I
-
The subscription have been marked inactive and must be reinitialized into a replication
Hi Team I keep on getting the following error on Transnational Replication setup in SQL 2005. below is the error message: The subscription(s) have been marked inactive and must be reinitialized. NoSync subscriptions will need to be dropped and recrea
-
Read file and count rows and columns
Can someone guide me on how can I accomplish the following a) read what supposedly is a matrix from text file b) make sure all the entries in input are integers c) if not raise error, else c) is the matrix a square matrix? d) if not raise error if it