How to define new derivation rules in FM module

Can somebody help me define a new derivation rule which is user specific in FM module. I want to map muliple Fund Centers to a single Cost center and also map many commitment items to a single GL.
Thanks
shivaji

You derive object X (fund centre) from object (Y) cost centre. In terms of logic, it's not possible to derive multiple values from single value. That's the concept of derivation. If you have cost centre (let's say ABCD), on what parameter will your logic decide whether to take fund centre XXXX or fund centre YYYY? As you understand, the FM posting should be done eventually on one fund centre as well as commitment item, fund, etc.
After all, the computer could be told what ever you have to tell it; if you, yourself, can make this decision - which FCtr should be taken - upon certain logic, it could be programmed as well in FMDERIVE.

Similar Messages

How to Define new Date rules

Hi ,
I have a requirement in my project, where in i have to create some new date rules. I've searched the whole web to find any document which explains the XML for Date rules but couldn't find any. Does any one know what that XML means, and how to create new Date rules ?
Please reply
Krishna-

Hi
it just calculates new dates base on reference dates or abap function modules.
In IMG in Date management node you can create your own date rules.
Best would be to copy existing one and than modify it.
Please read this thread about this: Date rules editor - file format documentation availability
Regards
Radek

How to define new colors for the form?(Finish)

Hello! Everyone!
I want to define new colors for the new form.
But I don't find where I can define it.
How to define new color for the form?
Thanks in advance!

You have to set the Canvas color or as I said earlier you need to use one of the available color schemas on the OAS or Builder runtime.
If you want to use user defined colors in the builder, then you need to create a new color palette and use it.
I personally haven't tried it, but there is a section in the online help that describes how to do this.
Tony

How to define the copy rules in master contract

Hi,
Could you please help me on how to define the copy rule in master contract . I cann't find the link,it's not under IMG/SD/sales/contract/master contract/define referencing prodecures.
Thanks/Cindy

Hi Sai,
I'm afraid VTAA may not resolve my problem. What I want is to define the copy rule. When you go into IMG/SD/sales/contracts/master contract/define referencing requirments/define reference procedure you will find there is a copy rule in field area. What I really want is to define that copy rule.
Thanks

How to define new classpath of libraries while making jar files with ant

I am useing eclipse and ant and trying to make a jar file. I have used some external jar files. I have managed to add external jar files to my jar. But Still I have a problem. In my project all libraries in lib folder. But when I put them into jar file. They are in the root folder.Classpath has changed and It couldn't find the class path.
Is there any body knows how to define a new class path for external libraries with ANT. or How can I put my libraries into a lib folder in jar ?? I think both of them would solve my problem.
thanks in advance.
My code is like that, I think it requires a little modification
<target name="jar">
        <mkdir dir="build/jar"/>
        <jar destfile="build/jar/Deneme.jar" basedir="build/classes" >
            <manifest>
                <attribute name="Main-Class" value="${main-class}"/>
            </manifest>
             <fileset dir="${lib.dir}" includes="**/*.jar"/>
        </jar>
    </target>

I can see why your other "question" was likely deleted. You need to drop the editorial comments and just ask a question. I believe what you want to know is how to configure something using php on your Apache server so that it can be read. If that's your question, here's a couple of places that discuss the topic:
http://www.webmasterworld.com/linux/3345459.htm
http://forums.macrumors.com/showthread.php?t=427742
http://en.allexperts.com/q/PHP5-3508/configuring-installing-permissions.htm
For a general introduction to 'nix permissions, take a look at this:
http://www.osxfaq.com/Tutorials/LearningCenter/UnixTutorials/ManagingPermissions /index.ws
And here's a whole book on the subject of Leopard permissions:
http://my.safaribooksonline.com/9780321579331
Try doing a Google search on "leopard permissions php apache" and see if you find what you are looking for.
Francine
Francine
Schwieder

How to Define Multiple Notification Rules for Different E-Mail Channels?

In C4C we can define a notification rule for New tickets, for example, that provides an acknowledgement of receiving the customer's e-mail.
This works great for a single support team, but what if we have multiple support teams, each with their own e-mail address, and each with unique requirements for their auto-acknowledgement?
When setting up a new notification rule, there doesn't appear to be any option to define the e-mail channel, service and support team value, or a "from" e-mail address.
We're on-boarding over a dozen e-mail teams, and I'd hate to tell them that they'll all have to share one auto-acknowledgement template from a single do-not-reply address.
Does anyone know if this is possible to:
Define the e-mail channel or service and support team as an condition in the notification rules.
Define the outgoing "from" e-mail address for a notification rule.
Thanks for any insight the community might have!
Mike
T-Mobile USA

Hi Mike,
As of release 1402, your analysis is correct. The out-of-the-box notification rules do not include the "incoming email channel" as one of fields on which to build condition, and all notifications are sent from a common do-not-reply address.
You can easily overcome the first limitation by using the SDK. For example, when the ticket is created you could set an extension field based on the email channel, and then use the extension field to define different notification rules, using different templates. All extension fields are automatically available to be used as conditions.
Thank you for your feedback and for bringing this item to our attention. We will definitely keep this in mind as we plan for future releases.
Kind regards,
Gabriele Bodda
Product Management

How to define Template Selection Rules according to doc language code

hi All,
I am using ucm10g, I need to use DC to convert word to html, by defining Template Selection Rules, it worked perfect.
Question is I have to use different template for different content that use different languages, for example, if a content has a primary file writing in English, that content will be checked in with langCode attribute of "en", and according to this langCode attribute, I will use different template that will show "nextpage" or "previouspage" according to langCode field, other content will use other template that show "nextpage" or "previouspage" in other language.
I donot think the fields used in Template Selection Rules(such as author, type, profile) in ucm10g can be used in this case, any suggestion?
Best regards

I will ask easier.
is it possible to set in RSCUR -> Exchange rate type 'Y' and Exchange rate from InfoObject '0EXRATE_ACC' AND use it in BEx?
If yes, how, if now why?
Thank you
Standa

How to copy copa derivation rules ( maintain rule value)

Hi All,
Can anyone help how to copy the copa derivation rules with maintain rule value from production to quality.

Hello,
Export and import of copa derivation rule is not possible.
usually Transports are moved from quality to production as per best policy.
Production to quality happens at the time of quality refresh.
in case of high importance please get in touch with Basis team.
Regards
Lavanya

KE21N with reference - copy old copa records without applying new derivation rule

Dear all,
does anyone have a clue how to make this:
We would like to copy some old COPA line items but face the problem that doing KE21N with a reference document the old derivation is overwritten in the moment the document is saved.
Is there any possibility to copy the old document and also the old derivations?
Thank you a lot
Kind regards
Birgit Seeger

Hi Birgit
The only way I can think of is to enter the char values as you want directly in ke21n. You may Need to temporarily change your derivation rules to not derive the char values if the same is already filled
Just click on the magnifying lens icon beside the Target field inside your derivation rule and you change setting
Br. Ajay M

How to define new item category for mm purchasing document

Hi,
pls let me know the path for defining new item categories for MM Purchasing document
thanks,

Hi,
Item category you are talking abt , you won't be able to create that as it controls the below item level items of your PO tcode screen .
Thanks
Dipak

How to define new host in catalog?

Hi guys,
I have migrate 9R2 database to new host location and i wanted to run backup using same script which worked on old host but i get error :
Wed Dec 8 13:59:13 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: DEV (DBID=1703379406)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-12154: TNS:could not resolve service name
Recovery Manager complete.
Is this means that i need to define new host location in RMAN CATALOG or what?

You are right!
But still i receive this
Wed Dec 8 14:49:47 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@ssl21dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: SSL21DEV (DBID=1703379406)
connected to recovery catalog database
Starting backup at 08-DEC-10
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/08/2010 14:49:48
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
Recovery Manager complete.
So prorbably old host database has different DBID defined in RAN catalog?

Dvt:Graph How to define own Style Rule Bundle

Hi,
I need help in defining style rule bundle in the backing bean to be used in the styleRuleBundle tag of dvt:graph
say for example I nee need to define the follwing rule...
All data value points below 50 should display in green
from 50-80 it should be yellow and 80-100 must be red in colour...
regards

Add to your resource bundle:
af_dvt_hv.fetchingData=Your textDario

Portal: how to define new text variables for information broadcasting

Hello everybody,
I hope the post here is placed on the right position. If not, please try to advise me, where to ask to get answer on following question:
-> In BI Portal -> tab Business Intelligence -> Bex Broadcaster -> it is possible to create PDF and post it somewhere into Portal or any other network drive. That's fact. I'm searching for possible enhancement of the F4 help next to the field "data name". There are available only following few variables <OBJECT_ID> <SETTING_ID> <OWNER_ID> <PROCESSED_BY_ID> <LANGUAGE_ID> <DATE_ID> <TIME_ID> <WEEK_ID> <MONTH_ID> <QUARTER_ID> <YEAR_ID>
We are facing this issue: generated analysis file is valid for the period from month 01 to month actual-1. So therefore I would like to implement my own variable.
Do you know guys, where to define this own variable with own logic?
Could you please give me some hints how to create a new one and fill the logic?
Thank you very much in advance
Stan

Not resolved. Life goes still on.

How to define complex reconciliation rule

i have to do reconciliation with some complex rule but if i see reconciliation rule we can only define simple rule like userid = samAccountName. Please suggest how we can define complex rule.
thanks in adv.

http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14061/busrule.htm#BIBJEFCG

How to define an aggregation rule for a dimension based on bridge table?

Hello,
I need a solution for aggregating data correctly when using a dimension based on a set of dimensione tables containing a bridge table. Please find below a description of my business case and the OBIEE model which I’ve created thus far.
Business Case
The company involved wants to report on the number of support cases, the different types of actions that were taken and the people involved in those actions. One support case will undergo a number of actions (called ‘handelingen’) until it is closed. For each action at least one person is involved performing a specific role, but there can also be multiple persons involved with 1 action, each performing a different role for that action. This is the N : N part of the model.
The problem that I face is visible in the two pictures below:
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/sample.png
As long as I don’t include anything from the Dimension Meelezer in my report, I get the correct number of handelingen (7). When I include the person (called ‘Meelezer’), the measuere per action is multiplied by the number of persons/roles involved with that action.
When I changed the Aggregation rule in the report column #Handelingen to ‘Server Complex Aggregate’ I do get the correct endtotal:
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/sample2.png
I believe it should be possible to define in the repository a different aggregation rule for individual dimensions, but I’ve not been able to achieve this.
Explained below is what I have created in my Physical and Business Model & Mapping layers:
The Physical Model is built like this:
(This is just a small part of a much larger physical model, but I’ve only included the most relevant tables)
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/PhysicalDiagram-1.png
The Fact table (ALS Feit Zaakverloop) contains FK’s for the action (FK_HANDELING, joined to ALS Dim Handeling), the date the action took place (FK_DATUM_ZAAKVERLOOP, joined to ALS Dim Datum Zaakverloop) and the uniqe group of people involved (FK_MEELEZERS, joined to ALS Groep Meelezers) and a measure column (SUM_HANDELINGEN) populated with the value ‘1’ for each row.
The Bridge table (ALS Brug Meelezer/Reden Meelezen) contains three FK’s: FK_GR_MEELEZERS (joined to ALS Groep Meelezers), FK_MEELEZER (joined to ALS Dim Functionaris) and FK_REDEN_MEELEZEN (joined to ALS Dim Reden Meelezen).
The Business Model
In the business model, the four physical tables for the N:N relation have been combined into one logical dimension table.
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/BusinessModel-1.png
DIM Meelezer contains one LTS in which the four physical tables have been combined:
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/LTS1.png
And all the required locical columns have been created:
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/LTS2.png
DIM Meelezer has also been identified as a bridge table and a Business Key has been defined on a combination of the FK’s in the bridge table and business codes of the two dimension tables.
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/BMDIM.png
Next a hierachy was created for Dim Meelezer:
http://i84.photobucket.com/albums/k24/The_Dutchman_2006/OBIEE/Hier.png
In Feit Zaakverloop, a measurement called ‘# Handelingen’ was created using SUM_HANDELINGEN, with an aggregation rule of SUM.
In the LTS of both the DIM Meelezer and Feit Zaakverloop, the Logical Content Levels have both been set to: LVL Detail – Meelezer.
Please provide suggestions that will NOT require changes to the physical datamodel as they would require too much time to achieve (or at leats would not be ready before my deadline.
Thanks!
Edited by: The_Dutchman on Dec 13, 2011 11:43 AM

Hmm, no replies yet...
Am I in 'uncharted territory' with this issue?

How to define new derivation rules in FM module

Similar Messages

Maybe you are looking for