How to define OMJJ for movment type

Hello, In OMJJ - against we set the account grouping with following Movement Type - Special Stock Indicator - Movement - Consumption Posting - Transaction key. What is the relationship between special stock indicator, consumption posting and account assingment category.
Abhay - 9819175185

Hi
If you want to manage stock separately pertaining to Consignment or Pipe Line Material or Project Stock etc, you need to maintain the Special Stock Indicator.
Indicator for Consumption Posting is used to post GR agains Purchase Orders. It is derived based on the Account Assignment Category maintained in the Purchase Order.
Account Assignment Category determines which account assignment details are required for an Item in the Purchase Order (ex Cost Center etc).
Srikanth Munnaluri

Similar Messages

How to define variable for value range in Bex Query?

Hi
How to define variable for Keyfig. value range on runtime like characteristic in Bex Query?
Example: On runtime user select one of the following condition:
1)User want to those records where amount is greater than $1000
2)User want to those records where amount is greater than $1000 and less than $5000
3)User want to those records where amount is greater than and equal to $1000

Hi ,
Need to Use exceptions & conditions for this scenario's & need to create variable for exceptions based on condtions.
Below document provides steps how to make selections at run time for a kfg.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60b33a28-dca2-2d10-f3b2-d2096b460b1e?QuickLink=index&overridelayout=true&48842368468641
Regards,
Seshu.P

How to define roles for the reports that i have created using WAD?

Hi all,
Can anyone let me know how to define roles for the reports generated using WAD. And what is the procedure for creating and defining roles. Is this process take care of Bw consultant nor the basis guys.
Can anyone let me know the entire procedure about the roles in bw 3.5
thanxs
haritha

Following links might helps you
create a role
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/authorizationinSAPNWBI&

How to define job for V_V2

Can anybody tell step by step "how to define job for V_V2"?
Thanks in advance for the answers.....

BElow there exist a good document:
http://www.scribd.com/doc/39230554/Background-Job-Scheduling-in-SAP#source:facebook

How to define Discounts for Salesman?

Hi all,
How to define Discounts for the Salesman in either the Receivables or Order Mgt Module?
Rgds

Hi,
Please try this:
Define discount account in Financial Options
In Payable Options > Payment Tab, uncheck the Check box: "Exclude Tax from Discount Calculation"
In Payable Options > Invoice Tax Tab, check following Check boxes: "Use Automatic Tax Calculation", "Calculation Level Line", "Allow Calculation Level Override".
In Payable Options > Withholding Tax Tab, check following Check boxes: "Use Withholding Tax", "Allow Manual Withholding", "Include Discount Amount", "At Invoice Validation Time", "Never"
At supplier site level in Payment Tab, use the Payment Terms as create in step 1:
Term Date Basis - Invoice,
Pay Date Basis - Discount, and
Check the Check Box - Always Take Discount.
At supplier site level in Invoice Tax Tab, use the Tax code as created in step 2:
Calculation level - Line,
Check Allow Calculation Level Override,
Rounding Rule - Nearest, and
Uncheck - Distribution Amount Include Tax.
Thanks,
Shikha

How 2 define alias for WD Component / Application

Hi all,
There are methods in IWDDeployableObject to get WD Component / Application (WDDeploableObjectPart) by alias.
But how to define alias for them? Where should definition be placed and what is the format? Could anyone share working example or point to related documentation?
VS

Noufal & Bharathwaj,
Probably there is a confusion here: HTTP aliases are related only to corresponding service, and affects how URL is composed / interpreted.
On other hand, aliases I mentioned are related to deployment service (in this case: lookup deployable object part by alias). By the way, they cover both WD applications and <b>components</b> (probably component interfaces and more).
Valery Silaev
EPAM Systems
http://www.netweaverteam.com/

Usage decision for movment type 323

Hello
Can anyone tell me how I can post movment type 323 through QA11 with a usage decision?
I can see in config Quality Management>Quality Inspection>Inspection Lot Completion>Define Inventory Postings that there is a posting UD TRANSFER02 that uses 323 but I cannot see how this is posted through transaction QA11!
Thanks
Sue

hello,
Can you do this. in the config path Quality Management>Quality Inspection>Inspection Lot Completion>Define Inventory Postings , create a new entry with 08 suffix. Assign mvt type 323 to it.
In my system it comes with a description "other qty posting". Save it. now this new entry will show up in qa 11 in the inspection lot stock tab where you could post the quantity with this entry to trigger 323 mvt type.
Now go OMJJ and check for mvt 323 whether QA11 is in the allowed transactions , if not add it there/. ( Caution: 323 isnt meant to work with QA11)
now run qa11, it works fine.
But my question is if you arent accepting , rejecting or doing a sample, or other functions described for QA 11 UD , then you can just do a MB1B 323 and this should serve your purpose, why do this though QA11.
Hope this helps
Thanks,

How to define a data carrier type "archive" in DMS

Hi, experts.
In order to intgerate DMS and ArchiveLink(Check in origin with ArchiveLink), i want to define a data carrier type "archive" in DC20.
I have already defined a content repository 'Z2' in OAC0, but i can't enter 'Z2' into the field-data carrier,
error message: You cannot use data carrier Z2 - try displaying possible entries
Message no. V&021
and the only possible entries is 'MA'
which type content repository could be used as data carrier type 'archive",
or there are some steps that i missed?
Here are parameters of 'MA' and 'Z2':
MA ARCHLINK SAP System Database 0046 ma
Z2 ARCHLINK HTTP content server 0046 Test
Thanks.

Hi,
Let me refresh your message with your Permission.
i think iam also in the same confusion, any suggestion regarding this is eagerly welcome.
i have some specific senario in DMS where the Client needs to store the DMS Original Files in SAP Archive Server through SAP Archive ink,
here if i configure a part of Archive Server, so as to store the Original application files of DMS,
say ZDMS_Arch01, ZDMS_Arch02, ZDMS_Arch03.
ie.. if i configure Archive server as a Storing medium for DMS Original Files, will it appear as an Option to be selected for storing the original application files,
just like as we get the list of storage catagories to store the Originals like DMS_C1_ST or any content server Storage catagory (clicking Check in original, in CV01N transaction
any one who have configured this please Clarify.
Regards
Sathish

How to define ranges for a keyfigure

Hi Frnds,
I have two keyfigures for employee experience. One for present company experience and the second for previouse experience. And I have created a calculated keyfigure for calculating the total employee experience by adding the those two keyfigures.
Here I want to design a query using the range values for that calculated keyfiger values. And for that range i want to display count i.e the no. of employees.
for eg:
range   | TotalYrsof exp
<1       | 10
1-2      | 20
3-5      | 30
6-10    |   40
So anybody pls help me in this problem.
Here How can I define ranges for that calculated keyfigure?
Is there any other way to define ranges?
Thanks in advance,
Sridhar

Hi,
Create a Cal.Keyfigure on Total Exp. and use that for another cal keyfigure
Example for <1
Total Exp <1
for 1-2
Total Exp >=1 AND Total Exp <=2
for 3-5
Total Exp >=3 AND Total Exp <=5
and so on...
Thanks,

How to define a generic structured type (deep structure) w/o LIKE

Hi,
I have been trying to define a generic structured type that would include a component (field) of type "table type".
Look at my type [ty_compatibilite]. It is the structured type that needs to have a component called "mobile" which needs to be an internal table. I have tried to create a genereic table type called tt_mobile (based on ty_mobile) but that did not work. I have not been able to avoid using the LIKE command to make it work.
Any suggestions on how I could define my component "mobile" without using a "LIKE"... ?
Here is my code:
TYPES: BEGIN OF ty_mobile,
          ref_mob_sfr    TYPE zmobil,
          ref_mrq_sfr    TYPE zmarq,
          type_compat    TYPE zsea_comp_type,
       END OF ty_mobile.
TYPES: tt_mobile TYPE STANDARD TABLE OF ty_mobile.
DATA: lit_mobiles TYPE STANDARD TABLE OF ty_mobile.
TYPES : BEGIN OF ty_compatibilite,
          cod_ean        TYPE ean11,
          lib_art        TYPE maktx,
          compat_all_mrq TYPE zsea_comp_gen,
*          mobile        TYPE tt_mobile,
          mobile         LIKE lit_mobiles,
        END OF ty_compatibilite.
TYPES : tt_compatibilite   TYPE STANDARD TABLE OF ty_compatibilite.

define key or use default one:
TYPES: tt_mobile TYPE STANDARD TABLE OF ty_mobile with DEFAULT KEY.
If you don't specify key the type is treated as generic

How to define validity for RA key

Hi
I want to define validity for RA key. This is available in OKG3 under Edit tab. However, the functionality of "Define Validity" is inactive.
How can we activate the same?
Regards,
Vijay

Hi,
I think Michael is asking how you would define the Filter in the Coherence Console not in Java code.
In the Console you prefix the method name for the filter with an exclamation mark.
In your example you see this
Map (jk): filter f Equals getUserId 'Master'...when you press enter you see the toString of the Filter...
EqualsFilter(.getUserId(), Master)Using an exclamation mark you get a Key Filter like this
Map (jk): filter f Equals !getUserId 'Master'...when you press enter you see the toString of the Filter...
EqualsFilter(KeyExtractor(extractor=.getUserId()), Master)...which you can see has a KeyExtractor.
JK

How to use QTI for Comprehension Type Question

Hi,
I want to use JQTI V2.04 for building up comprehension type Question plz. help

Sorry for not giving details.
I just want to know how the XML for “comprehension” type question looks like with QTI specification.
My comprehension type question may contain sub question of type like multiple choice question, single choice question, true false, match the following, fill in the blanks etc.
I’m trying to use JQTI library(http://jqti.qtitools.org/) to create such kind of questions.

How to defining mimetypes for project?

Which is the way to define mimetypes for a project?

Stephen,
Now I know that setting this signal is not possible for this resource.
But I always thought that the less threads in process are the less CPU consumption is, which means that not all cpu-shares are used?
So if I have the case that application server has a control loop which
is responsible for finding the optimal size of thread pool, then it can rely on SIGXRES which indicates that cpu-shares threshold is exeeded and size of thread pool shouldn't be increased.
Anyway if signals are not supported threre is a possibility to analyze syslog messages which for me is unconfortable.
I appreciate your help!
marcin

How to define routes for freight cost calculation

Hi,
in our company we plan to use LE-TRA Transport with Freight costs calculation. To use Transport it is a must to maintain routes in all sales orders/deliveries. Currently we do not use it and now we have the challenge to define routes and later due to freight costs calculation Stages. There are different solutions for routes. In some other companys we have only routes dependent on the Transit duration, but that's all. They don't use stages and they don't use freight cost calculation in SAP.
As I know routes should describe geographical locations (The way location A till location B). Based on the route we have a defined stage with a distance, shipping type.... That would mean for a company: They need to analyse all delivery channels with different forwarding agents and so on. Is that possible when the forwarding agent is responsible for scheduling? That means for a company with customer around the world thousands of routes?
Alternatively it is possible to create stages in the transport documents. Is that more recommendable? It would be nice, when someone could post his experience with that topic.
Thank you,
Raphael

Hi Luis,
thank you for the response. My problem is not the technical view. I know how to create the routes and what kind of information I need. The problem is to unterstand how this concept can operate in practise in a company with many different customer.
The following site describes the concept of routes in SAP:
http://blog.tkreddy.com/2010/09/17/understanding-the-concept-of-routes-le-shp-in-sap-ecc-6-0/
A company with many delivery plants and customer around the world needs to forward all delivery channels they have to us, A route describes an area and includes stages with location A and B. The stages are assigned to a forwarding agend. Based on that information I can start a freigt cost calculation. The structure of stages and routes also depends on the situation how many different forwarding agents are involved in a delivery process.
In my opinion it is really a big effort to find a reliable solution for the amount of routes and stages. I am thinking about to use the solution to create the stage manually in the transport document and to use the routes to describe the transit time.
Raphael

BMM - Decision criteria on how to define LTS for a multi-source object

I am curious to know what others use as their decision criteria when determining how to setup a BMM logical table that has multiple sources that map to multiple columns in the logical table.
For example,
If you have defined logical table Dim - Customer in the BMM that has 4 fields:
Dim - Customer
Customer Id
Customer Name
Customer Address
Customer Phone
The sources for this logical table from the physical layer are:
CUSTOMER (all customers exist here)
CUSTOMER_ADDRESS (A customer may or may not have an address, but can have only one address to simplify this conversation)
CUSTOMER_PHONE (A customer may or may not have a phone, but can have only one phone to simplify this conversation)
Field Mappings from Logical Table to Physical Table are:
Dim - Customer
Customer Id - CUSTOMER
Customer Name - CUSTOMER
Customer Address - CUSTOMER_ADDRESS
Customer Phone - CUSTOMER_PHONE
How would you setup the logical table and LTS's for this object in the BMM knowing the following requirements?:
1. The Address and Phone tables should only be joined in when fields from those tables are used in a report/query.
2. Since a customer may or may not have an address or phone, the BMM table needs to be setup such that adding those fields into a query will not filter all customers that dont have data for those fields, i.e. display null if it does not exist.
My initial approach for resolving this would be to set it up as follows:
A single Logical Table Source: LTS_CUSTOMER
Three Tables added to the LTS:
CUSTOMER, CUSTOMER_ADDRESS, CUSTOMER_PHONE
Two joins defined for the three tables:
CUSTOMER - CUSTOMER_ADDRESS (LEFT OUTER JOIN)
CUSTOMER - CUSTOMER_PHONE (LEFT OUTER JOIN)
Issues/Questions:
- The problem I have run into is that any query that uses Customer Id or Customer Name still causes a join to the CUSTOMER_ADDRESS and CUSTOMER_PHONE table even though I didn't use a field from those tables. I assume this is because OBIEE things that any query to that Logical Table using that LTS has to query it as the LTS is defined (so all three tables are joined in)
- Is there a way around this? If so, is it to specify separate LTS tables for the Logical Table Dim - Customer? If you do this, then there is no way to specify a LEFT OUTER JOIN and the query will just default to what is specified in the Physical Layer as an inner join.
- Curious as to what peoples thoughts are in general for how to decide whether to specifiy multiple sources in a single LTS or just add multiple sources to the Logical Table and the decision criteria for going either way.
Thanks in advance.
K
Edited by: user_K on Jun 3, 2010 11:09 AM
Edited by: user_K on Jun 3, 2010 11:10 AM

Thanks a lot for the example, that fixed the problem.
I've been reading the NSAPI programmers guide several times now and I was under the impression that you should either use <object> or <client>, never thought about this approach. Now when I re-read it is makes sense, but wasn't very clear at first.
I think I'll e-mail Sun to suggest an addition of the <Object> tag in their <Client> tag example (http://docs.sun.com/source/817-6252/npgobjcn.html#wp1045056) to make things a little more clear.
Thanks again, now I can finally implement the final configuration settings and plan for the actual switch later this evening.

How to define OMJJ for movment type

Similar Messages

Maybe you are looking for