How to define print size and paper

I designed an invitation in Pages and I want to print it on Staples inkjet notecard paper. There is 2 notecards to a page.
How do I define in Pages that I am using Staples or Avery notecard paper #.......
so it knows to print 2 notecards to a page and how to place them.
Thanks
-Jeff (frustrated) in NYC

Hi Jeff,
I've tried the "thank you" template to check this out, hope it's the same set up - (two copies per page), as you.
Go > print
below "pre-sets" (again my printer)
click on any arrow to open menu
select "layout"
select two copies per page - also when here, other variables
There is, in my printer menu, (below pre-sets) a "paper handling" selection which lets me choose which paper size to print on.
Hope it's some help,
Robert

Similar Messages

How to change print size and DPI setting in Aperture

If I import a raw image from my camera (D2X) to Aperture and print the image at about 8"x10" through Aperture, it prints at about 300 DPI, if I change to size of the same image to 12"x18", in Aperture, it prints the image at about 166 DPI. I do not believe there is a way to change this in Aperture.
My question is, can I open the image at 8"x10" in PS, change the size and resolution to 12"x18" and 300 DPI then save it, open it again in Aperture and print it. If I do these things, will the image printed in Aperture still be 300 DPI and how can I check it to see if that is the case?
I have not been able to find the DPI setting anywhere in Aperture to confirm that it is what I want or need.

"You can make the pixels bigger by making the image larger but you can't add any more pixels without running some kind of interpolation filtration like GenuineFractals or a recomputation like bicubic."
Thank you for your explanation and that brings me exactly to the point of my question.
Can I interpolate my original NEF raw image after conversion by Aperture to a much larger image for print using something similar to what Photoshop does with it's bicubic smoother or as is done in genuine fractals or must I go out of Aperture and back if I want to print with Aperture. I am hoping you will tell me that Aperture is or will be capable of interpolating an image to a larger one with more than just the pixels supplied by the camera. I do not belive that these are not enough by themselves to print a quality image in a much larger size.
I may be wrong, but I believe that it is somewhat common practice to interpolate an image to get a greater resolution printed image at a size larger that what is possible with a resolution provided by the (D2x in my case) DSLR camera.
Or is this just a tempest in a teapot. In other words, will I be able to take the image out of the D2x (12.5 megapixels) and print a 13x 19" image with the same quality in Aperture (uninterpolated but enlarged) as an interpolated image in PS or Genuine Fractals and then in PS?
Thank you

Crosstab: How to define margin size and hide a resuming field

Post Author: jef.zapata
CA Forum: Charts and Graphs
Hi,I've work a lot on how I can optimize space between my fields in crosstable, and now I want to decrease margin size (removing margin totally make the display of my field horrible!). How can I do that?Secondly, I want to use a resuming field to define the sorting of my group field. This kind of sorting is working very well, but I want to hide the resuming field, not only supress the value, but totally hiding the field without loosing space, because I've got another resuming field that I want to display. Is it possible?Thanks a lot! Jef----
Using Crystal Report XI, on Release 2

Hi Suman,
if your problem is to avoid null pointer exception for EVS, before executing RFC you can check (wdContext.node<EVS>.current<EVS>element!=null). then you can populate a message for warning the user to enter EVS field.
and stop executing RFC.
thanks
Siva

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

What print and paper sizes are you using? Are you trying to print a borderless print? Does your printer support borderless for that particular size? Are you printing to the custom stock size or to a larger stock size?
OT

ERROR Message: Printer size and type paper is incorrect

ERROR Message: Printer size and type paper is incorrect. Its set for automatic detection and regular paper. I unstinstalled and reinstalled the software...and tried other settings. It wont be print just cancels.

Please read this post then provide some details. What printer model? What operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

hello ! how to change document sizes and use our own size (not A3, A2 ...) thank you !

Experiment. No harm in trying.
If you are just starting to use Pages you need to make your own assessment given current events whether committing your work to a format and software given this support is a wise move.
You also need to look at what will produce workable results. Particularly if your large posters are to be commercially printed and contain large bitmap (photographic) images.
Always work backwards from your output. Ask your printer what they require to do their job.
Peter

How to change font size and style in keynote for ios

How to change font size and style in keynote for ios

Same situation for report parameter input value font. What ever we do , it is still Arial and size 10.

In SAP 4.6c In classical reports output how to change Font size and Font type

Dear Experts,
In SAP 4.6c, in classical and interactive reports output how to change font size and font type.
Regards,
Zaker.

These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
With old-style HTML, the font size and family are set using the font tag.
With modern style HTML, that is done using cascading style sheets (CSS).
Your favourite search engine will turn up tons of information on both.

How to attach print program and sap script for F150 transaction

How to attach print program and Z sap script for F150 transaction

Hi,
you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
Kostas

How to define the size of report area and its elements?

How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
Is there any way to change the measuring units?
Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
Thanks.

Hi Juliano,
I hope this is what you had in mind...
1. File / Page setup: set your paper size, portrait/landscape and margins.
2. Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
3. Measuring units: is this for the ruler? This is pulled from your computer settings.
The rest I'm not sure about but I hope this is enough to get you started!
Heather

Page file concepts and how to define its size ?

Hello Experts ,
Wt is the concept and use of defining page files in standard oracle and SAP installations ? why do we need to define it ?
how much size is defined for page file size and on wt factors does it depend ? and where is it defined ?
Requested to revert to the queries at earliest . Points guaranteed .
If any supportive document is sent for the same , it sahll be appreciated .My Email id is [removed by moderator] .
Thanks and Regards,
Saumya

The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

Hp2015 define printer orientation and 'fit to paper'

i am trying to create a printer that only does 1 thing. printer landscape and fit the text to the page no matter what.
i know that may not seem practical but it will be used to only print 1 report which is slightly bigger than a page landscape at 8 pt font. 6 pt is too small. i works wonderfully when i choose the printer go thru the customizing for it, even save a quick set task named for the report. when i print it, it looks good.
but, even after saving the parameters, the next time i print 'default' to the printer some my quickset task info is gone and it returns to the defaults for the hp2015. i have thought of deleting all the quick sets except the one i made, but it wont let me delete the 'default' settings.
anyone know how i could accomplish this?
thanks. jim
This question was solved.
View Solution.

Open your printers folder. Right click on the printer icon and select Properties. CLick on the Advanced Tab, and clikc on the 'Printing Defaults' button at the bottom. Now make te necessary changes here, and see if it's remembered by the printer.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

I have a cp1518ni, how do i print on glossy paper and get a glossy output?

When I print on glossy paper the toner areas do not come out glossy, is there a remedy?

What do you have set for messages in Notifications?

How to change print size on HP Envy 5530

Hi,
I just set up my new Envy 5530 printer and have begun printing. I am not seeing an option to change the print size. As I primarily will be using this printer for business shipping postage labels, I usually reduce my print copy to 85% to save ink, paper, and shipping tape. I had this option on my old HP printer- but am not seeing an option for it anywhere in the print set up window when I go to print. Help!
Thank you for your assistance, Nuit

Hi @nuit
I see you are trying to make the font smaller on your printed output. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and/or what programs you are printing from, and what operating system, and version do you have? Mac or Windows?
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I print black and white on Mountain Lion?

Hey.
Does anyone know how to print black and white on Mountain Lion?
I searched the community and Google but I couldn't find anything...
Regards,
TeaDragon

It's usually in the Print dialog when you File > Print. Select the Show details button, the change the option in the horizontal line to Paper Type/Quality. Click the Color Options triangle and change Color to Greyscale.

How to define print size and paper

Similar Messages

Maybe you are looking for