How to define & read Standard Text in SAPScript? Urgent Please
Hi Experts,
How to define & read Standard Text in SAPScript? Urgent Please..
Thanks in advance
good answer will points gud marks.
sekhar
Hi
U can't define a standard text in a SAPScript, you call call it only by statament INCLUDE
/: INCLUDE <ST TEXT NAME> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
U can define it by trx SO10.
If you need to know the text without to print it, you need to use a routine where u can use the fm READ_TEXT in order to find out the text.
Max
Message was edited by:
max bianchi
Similar Messages
-
How to use a standard text in Smartform ?
hi all...
iam want to use standard text in smartform ?
can any one tell me how to do this ?
Thanks
sandyuse function module READ_TEXT to read standard text .
Regards,
Shiva Kumar -
How to print a standard text of 3 pages in the script output?
Hi all,
I want to print a standard text as an include in the script output.
But the standrad text is of 3 pages conataining continuous (some terms and condtitions) text.
But while executing driver program, I am getting a STOP messgae pop-up saying 'Output is continuous or contains too many pages (>4)'.
How to get the standard text of 3 pages in the output. The standard text is to be printed at the bottom of the output.
Thanks,
SachinHi ,
To display standard texts you have to create a include in your script below is the syntax for that:
INCLUDE name OBJECT name ID name PARAGRAPH name LANGUAGE name
Include command is used to include standard text in a form.the text
should be already defined by using transaction SO10.
Here name is the name of text
ID is used to classify text e.g. SDVD (SD related text) , ST (Standard text)
OBJECT is used to specify type of object it an be TEXT , DOKU
LANGUAGE is used to specify language like EN ,if ommited than logon
language is used
PARAGRAPH is used to specify the paragraph like C
e.g. /:INCLUDE mytext OBJECT TEXT ID ST LANGUAGE EN
Here the standard text created in SO10 with name mytext is
included in the form in language EN (English)
Please let me know if you have still any confusion.
Thanks
Narendra Vikram Vishwakarma -
How to attach a standard text to a Transport request?
Dear all,
Please let me know, How to attach a standard text(created in tcode SO10) to a Transport request?
Thanks in advance.Hellö,
Run the report RSTXTRANS and give the standard text name and execute. A popup will be dispalyed which asks for the TR
Regards,
Vasanth -
How can i read header text?
how can i read header text?
ie, i want to read two values that are stored as header text in purchase order.
how can i retrieve that values?Hi,
The long texts of a document are stored in a encrypted format in the STXH and STXL tables, where STXH stores the header information of the
long text like TDOBJECT, which indicates which text object the long text belongs to, TDID which indicates the Text ID and TDNAME which is
the actual name of the long text.
As these texts are stored in a encrypted format, the text cannot be read using a SELECT statement. You will have to use the function READ_TEXT. The easiest way of getting to know the parameter values is to go to a document, open the long text in a full screen mode. For example, when you wan to see the long text for a Purchase order, go to transaction ME23n. Assume, you want to see the parameters for the Header Text. In the first Tab Strip Control, click on the Texts tab and select the Header Text node on the left hand side, which will display the text on the right hand side. Now, double click on the text editor on the right hand side. This will open the text in the full screen mode. In the menu Go To --> Header, you should be able to see the values for all the three parameters we discussed above. We will have to do the same thing for whichever text parameters we want to see.
TREC-TDSPRAS = SY-LANGU.
TREC-TDID = 'ECCS'.
TREC-TDOBJECT = 'ZECCS'.
TREC-TDNAME = Z_ACCOUNT.
CALL FUNCTION 'READ_TEXT'
EXPORTING
ID = TREC-TDID
LANGUAGE = TREC-TDSPRAS
NAME = TREC-TDNAME
OBJECT = TREC-TDOBJECT
TABLES
LINES = LINES
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
Details:
Language DE
Text ID F01 Header text
Text Object EKKO Purchasing doc. header texts
Regards,
Shiva Kumar -
Recruitment Faxing & e-mailing only possible for standard text in SAPscript
Hi,
I am using the old recruitment module PA-RC ion ECC6 and I am trying to send an email to an applicant. When I try and do this I get message "Faxing and e-mailing only possible for standard text in SAPscript". In feature WPROC I am set up to use RTF. Is there no way to send RTF emails? Do I need to create SapScripts for anything that I may possibly want to email?
Thanks
TomApparently only able to carry this out in SAPScript
-
How to use standard text in sapscripts
Hi,
I want to place a part of text to be displayed in my sapscript in the form of a standard text. I want to make the text bold with italics and also want to set a perticualr size to it.
I am new to SAPscripts can anybody please help me with this.
regardshi
Use character formats in the script itself for the specific text. and in it mention font as bold and italic
and in text elements keep the text between <C1>......</> where C1 is your character format
or
create global style with
U can adjust the bold formats in the standard text itself.(se72).
In the standard text give the character formats and apply them in the text editor of ur sapscript as
text between <C1>......</>
In the text editor go to insert -> text elements-> and standard text.
u can give the standard text name there.
regards
prasanth -
Pls explain how to add standard text in sapscript & smartforms
Dear friends,
pls explain how to implement standard text into sap script and smartforms.
in how many we can do.
and what is diff between include text & text modules in smartforms.
how we can translate into multiple languages.
Regards
Jagadeeshwar.Bhi,
for the include text goto tcode so10.
for changing the smartform and scripts use there methods..
1. goto se63>translation->abap objects->other long texts->FS Forms and Styles---> for scripts use Forms
for smartforsm use SAPSmart form
for styles use Styles
2. goto se71->utilities->original language.---> source lang
(for scripts) target lang
to include the include text created in the tcode so10 in the smartforms go to general attributes of the text element--text type> include text...
regards,
venkat.
Edited by: venkat appikonda on Mar 22, 2008 11:56 AM -
Including standard text in SAPScript...
Hi,
I have created a standard text Z_NOTE in SO10. If I want to include in Sapscript form, how do I do it ?
Thanks.
Rajeshuse the include control command:
/: INCLUDE Z_NOTE LANGUAGE 'E'
Assuming that the text is created in English language, in case if it is in a different lnaguage, modify the above include command with respective language. -
How to get the standard texts available in a smartforms
Hi Experts,
How can we find out the standard texts that are exist in a particular smartform . is there any table/function module available to get those standard texts? I am finding the table STXFTXT, from that I am getting only textline. But I need the standard text names that are used in a smartform.
Thanks & Regards,
Sureshhi,
1,Use SO10 Tcode to write standard text in Smartform.
2.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
3.
1. take function module name of the smartform.
2. goto se37 and type that fm name.
3. goto attributes tab
4. double click on either program or include .
5. There u can find all the subroutines used inside smartform.
6. search for "perform %move using %textkey-name".
4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
check the tables STXH & STXL.
5.
How to CAll Standard Text in Smart Forms
In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available. -
How to call Subroutines,Standard Text & using Internal Table in SmartForm
Hi all,
need help in the following areas.Its very urgent!
1.How to CAll Subroutines in Smart Forms
2.How to CAll Standard Text in Smart Forms
Situation:
We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
Any Help in this direction would be highly appreciated.
Regards
RamuHi,
When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
Specifying a Currency or Quantity Reference
Use
In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
· If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
· If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
Procedure
You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
1. Create the reference to the currency field by entering the following values:
- Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
- Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
2. Under Data Type, specify whether the data type is a currency or quantity.
Result
In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was Added by: Bharat Reddy V
Message was Added by: Bharat Reddy V -
Smartforms,How to display different standard Text in a Text element.
In smartform,if I want to according to the different conditions,display one of the serveral different standard Text objects which all maintained in SO10 in a same text element,how to do it?
if i put them in serval text elements, each condition only display the corresponding text element,but the text content can not display in the same position.
Is there anyone can tell me?
thanks.use Alternative to control it no problem
for example you want to display the different SO10 to same position TEMPLATE's row 1 col2
TEMPLATE1
Alternative case1
YES
INCLUDE TEXT1(display SO10) [set output option line1 column2]
NO
Alternative case2
YES
INCLUDE TEXT2(display SO10) [set output option line1 column2]
NO
Alternative case3
every case your SO10's text is always display at line2 column2
just try to test it ,you can know -
How do I read a text file in a Jar Executable?
Hello All,
I have a need to package a text file into a Jar Exectable file and then have my java code read that text file in using a BufferedReader. Can anyone out there tell me how to do this? My first question is how do I reference this file by the path name? O, I'm also using Windows.
Thanks for your help.
KarlI have the same problem with kportner . I did by joop_eggen but I got the error at:
BufferedReader in = new InputStreamReader(is);Can't conver from BufferedReader to InputStreamReader
When I up my applet to server and get it from client. My applet couldn't read the text file.
Any one help me!
Thanks. -
How to display the Standard Text (SO10) based on condition in adobe forms
Hi,
I have created the Standard texts (through SO10 tr.code) of 4 plant addresses. In the Layout of adobe form, i want to display any one plant address based on the plant number (as a input) and the rest 3 standard text need to be hide. i tried in Form clac to hide, but i unable to succeed. could you please help me, in this regard.
Thank you.
Regards,
MallikarjunaHi,
You can add all the 4 text in your context menu and create an condition for text.
Example: (LS_HEADER is a structure only for example, you need to decide based on your own form interface)
Text_1000 Condition -> LS_HEADER-WERKS = 1000
Text_2000 Condition -> LS_HEADER-WERKS = 2000
Text_3000 Condition -> LS_HEADER-WERKS = 3000
Text_4000 Condition -> LS_HEADER-WERKS = 4000
The text satisfyling your condition will only be printed and you can assign these text to the same block in PDF form. -
How to i read multiple text files one bye one
hi all
I need to select the text files multiple times and read files one by one
some how i managed to select the one text file and scan the data in the text file
i need to do this for mutiple files at the same time
please help me
Solved!
Go to Solution.gowthamggk wrote:
i sucessfully reading one text file through this VI
but as like this .. i need for multiple files
Why are you not using For loop???
gowthamggk wrote:
also shld read the text line by line
You can right click the 'Read from Text File' function and select 'Read Lines'. Refer to below code snippet.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.
Maybe you are looking for
-
Using Javascript to Confirm A Transaction
I created a form for a user to update/delete the rows in a table, when the user click the "delete" button, I'd like to add a piece of Javascript to confirm with the user whether he was sure to delete. It looks like this: confirm("Are you sure you wan
-
How do I create a playlist from songs in other playlists?
Before updating my iPhone 5 to iOS 7, I used to be able to create a playlist by choosing songs that were already in other playlists. Now, when I click on Create Playlist, the only options I have on the bottom of the screen are to choose from Songs, A
-
Hi I need a SQL report to conditionally display fields based on the value of a bind variable. I can achieve this via the interactive reports feature conditional display but I need to remove the GROUP BY for that field at the same time. How can I have
-
Is encore included in premeir pro
is encore included in premeir pro
-
The directory /usr/sap/ccms No exist
Hi friends. This quality system (SQ1) is a backup / restore with ABAP and JAVA instance and is operating its j2ee instance. I'm looking at the log for an error when you run a Query and publish to the web. 0017A451263E004F0000000000006A5100049EB7A28AF