How to define reporting time types for 0HR_PT_2 to populate records in rsa3

hi experts,
we are implementing Time and Labour and we are using info provider called 0PT_C01.
for that we have 2 data sources one is 0HR_PT_1 and 0HR_PT_2.
when i check in RSA3 there are records for 0HR_PT_1 Data source, but for 0HR_PT_2 data source it shows 0 records though the related info types have data.
i have checked in sdn for the solution, most of the replies are related to maintain Reporting Time Types.
can you please provide me step by step solution to maintain Reporting Time Types in ECC.
Regards
venuscm

Hi Venu,
You can maintain reporting time types in SPRO,
SPRO > Integration with Other SAP Components -> Data Transfer to the SAP Business Information Warehouse -> Settings for Application-Specific DataSources (PI) -> Human Resources -> Actual Employee Times OHR_PT_02 -> Define Reporting Time Types -> Maintain Reporting Time Types
Check with your HR team about maintaining reporting time types.
[http://help.sap.com/saphelp_46c/helpdata/fr/e8/cb2d28e4ded31184080004aca6e0d1/content.htm]
Regards,
Durgesh.

Similar Messages

Reporting time type for 0HR_PT_2

Hi,
I am creating the reporting time types in ECC system, to extract it to BW.
I have always used "Attendance/Abscences Assignment"
I would like to know, in which scenario, we will use "Time Type Assignment" or "Wage types Assignment"
Thanks and Regards,
Suresh.

Hi,
Not sure, But if you check with HR team or functionals you may get helpful information.
its seenm like functional activity.
Thanks

Define Reporting Time Types

Hi guys,
My quetion is: When creating i.e. an absence type in IMG: Time Management - Time Data Recording and Administration Absences Absence Catalogue, when an Absence code is being created the system should do the following:
1. Check if ABxxxx (the new code) exists in the Define Reporting Time Types (IMG: Time Management Information System Settings for Reporting Employee Time and Labor Data)
o If it exists OK, continue
o If it does not exist, the ABxxxx code should be created automatically
I'm not sure whether it's possible or not in IMG hence it uses customizing tables and view cluster tables aso, am I right? If yes, how?
Thanks in advance and Rgrds,
Gyorgy

Hi gyurka,
Time Types Definition
check with this link.
Thanks,
Neelima.

How to define "byte stream type" for "open file"?

Hello,
I created some numbers (type "double") in Matlab and stored in a file. What value should I use to specify the "byte stream type" for "open file" in Labview? Should I put something like "DBL" or "I32". I don't know where to find the list of legal "types" in Labiew help.
Thanks so much!
Felicia

Looks like 7.1:
The Matlab "double" is 64 bits (8 bytes). It doesn't make much sense to use an integer datatype to read a floating point value, so you would use DBL in LabVIEW. The numeric data types table can be found here.
By the way, this assumes you saved the file as raw binary, as opposed to a .mat file, which is something different.
Message Edited by smercurio_fc on 08-08-2008 11:21 AM
Attachments:
read file 7.png ‏13 KB

How to define a Sub Type in IT0717

Hi Experts,
Currently working on Benefit point account.
could some one tell me how to define a Sub Type for IT717.
how do i configure.
Appreciate your response.
Regards
Raj

Hi,
I have created the subtype in the table you specified.
But unable to see the created subtypes for IT552 in PA30.
Appreciate your further inputs.
Regards
Rajesh.N.S

0HR_PT_2 How to get back historical data for new report time type

Hi All Expert,
We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
The delta doesn't pick up the the past whole year data of the new report time type that we added.
Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
Please advice and Thx
Ken
Edited by: Ken Hong on Feb 27, 2008 9:24 PM
Edited by: Ken Hong on Feb 27, 2008 9:25 PM

P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

Define Reporting Times 0HR_PT_2

Hallo Experts,
we us the datasource 0HR_PT_2, so we define reporting times for BW.
It already works for our main campany, but we have also a daughter-company. So we have the problem that one reporting time works for our company but not for the daughter company - have anyone an idea what we can do.
Thanks Santra

Hi Santra/Experts
We have similar problem. We have configured as required the reporting time types in SBIW of R/3. Even though there exists data in related infotypes of Time liek PA2001, PA2002, Pa2010 and cluster etc. We are not able to get data from the extrcator 0HR_PT_2 where it is tested in RSA3.
Can you please let me know Do we need to make any more configuration changes need to to get dat from the datasource 0HR_PT_2.
Cheers
Nagesh

HR and BW: Reporting Time Types. Any Experience?

Hi,
We are implementing BW for a client. In the HR component, instead of writing the usual custom extractors to get Quota, Absense and Time related data I would like to use the standard extractors: 0HR_PT_1, 0HR_PT_2 and 0HR_PT_3.
I know that we need to set up the Reporting Time Types, but to do this we need to get a HR Consultant in and none of the ones (6 now) have no experience in setting these up. The lowest quote we have had is 10 days work.
The other option is to run the transactions PDW1 and PDW2, but again I have found very little information on these again I have not found any consultants who have actually run them.
My questions is:
1) Has anybody run the transactions PDW1 and PDW2,and knows if they work, are there any downsides, and general thoughts on using either of these.
Thank you for your time and thoughts
David

If I remember...
To set up report times, any time type not include as reporting time type is not going to upload to BW. Check some OSS notes about this.
You first create a "group" the report times, inside this group you add the time types and especify if its measure is in days or hours.
In BW you will get the group, but not the time types included in it.

Reporting time types

Hi gurus
Does anyone worked on 'REPORTING TIME TYPES' and 'REPORTING QUOTA TYPES'...Does anyone came across these...
I need to report on time management (time types,quotas info) with the help of BW consultant using BW extractors..
So, what all i should configure in time management to get the reports ..Does any one has related documents...
...plz help me out with ur valuable inputs
Waiting for ur replies
thanks in advance,
regards,
NAV

Hi gyurka,
Time Types Definition
check with this link.
Thanks,
Neelima.

How to defined data carrier valued for Linux?

Hi,
I am Defining Data Carrier. But I don't understand "Data carrier type" value. Is this PC value data carrier type for window? So If I want to define value data carrier for Linux. How to defined data carrier valued for Linux?
Please advise,
Duypm

Hi Nikita,
Refer the below mentioned links for your requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=412923
http://forums.sdn.sap.com/thread.jspa?threadID=1639500
Both have good guidelines on coding as well as configuration part.
Regards,
Deepak Kori

Sugg on how to define load time -specific time instance across GEO location

Hi Good Morning,
How to define the loading instance of time with respect to different Geographic Loacations. If we consider daily load how would time difference play a role here, bcos all business in different regions will not close if we consider to load based on one regions time. so can any body help me out how to define that time of loading and basing all Geographic regions into consideration or what is the best way to take it up.
Thanksin Advance
- Venkat

Hi Venkat,
What are the Geo's that you are considering?
Things to keep in mind while deciding the load times & the no. of times your Process Chains have to run:
1. Find out which are the most important/ critical process chains which the Business requires.
2. Find out their respective load times (how long does it take to finish executing completely)
3. APAC Region is always the first to start working. So, better would be that you schedule your chains by say 20GMT or a little earlier for this region.
4. EMEA region is the next. For this you can have your chains scheduled for 3 or 4 GMT.
5. US region - schedule the chains for 10 GMT or so.
6. Have different variants scheduled at different times & include your process chains in hose variants.
These are just general views. It will vary from case to case.
Hope this helps.
Regards
Vishal

TS1702 How can i report an app for their coding

Hi, i just wonder how can i report space ape for making bad game? Their samurai siege constantly have bad coding, one instance where they advice their users to change the device clock to "work around their bugs" and do not advice other of potential harm this could do to the device, leaving quite a few losing their other game progress and work progress. On another instance is how to create a new village. One would assume that you can create the new village if you have new game center, but the server still remember the device if it was once log in. Like atm, i have 1 village on my iphone 5, and im thinking of making a new village on my ipad, but when i installed the game on my ipad, i forgot to log out of the gc, and it continually loading my iphone 5 village on my ipad. I have tried log out, delete, reinstall, etc. one should not have that much trouble trying to get a new village on a new device. Now i have two device logging each other off because of this issue, and still can't get it to give me new village.
This is bad if i log on my friend's phone to check my village, and she can't create a new game because she is stuck with my village, and i can not play mine if she open the app. This is really stupid coding. Not only these two issuse, the company constantly producing new updates, and pay no attention whatsoever on quality assurance. And i'm fed up with it, as they are continually violating apple rules.
<Edited by Host>

Contact the developer.

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

BW reporting time type

Hi,
Anyone familiar with SAP BI extract reporting time types? It is about PT_02, the help document said it could extract wage types from infotype 2010. But as I test, it only extract the field 'number of hours'-field STDAZ. I need the field ANZHL.
any hint is appreciated.

Hi,
Not sure, But if you check with HR team or functionals you may get helpful information.
its seenm like functional activity.
Thanks

How do I report a bug for SAP 3D Visual Viewer?

How do I report a bug for SAP 3D Visual Viewer?
I have version 8.0.100.27428, Jun 18 2014

Hi Ellen,
Hope you are doing good.
The best option would be to raise a OSS incident in the component: CA-VE-VEV or CA-VE-CAD so that my colleagues can actually investigate this further and release a bug patch if needed.
Thank you!
Kind Regards,
Hemanth
SAP AGS

How to define reporting time types for 0HR_PT_2 to populate records in rsa3

Similar Messages

Maybe you are looking for